微波辐射下合成芳香硫醚

本文对在微波条件下S－烃基化反应进行了研究，并提供一种硫酚和卤代烃在氧化铝作载体的条件下，不用任何有机溶剂经微波辐射简便、快速、有效合成芳香硫醚的方法。     

超声波辐射条件下3-香豆素基-4-苯基-4,5-二氢-1,2,4-三唑-5-硫醚的合成

以香豆素-3-甲酰肼为原料,探讨了芳酰肼与异硫氰酸苯酯在超声波辐射条件下经环合反应生成1,2,4-三唑-5-硫酮的反应条件;进而借助1,2,4-三唑-5-硫酮的烷基化反应合成了两个含有硫醚结构的1,2,4-三唑衍生物.利用红外光谱和核磁共振谱表征了产物的结构,并利用元素分析测定了其组成.结果表明,与常规方法相比,超声波辐射条件下芳酰肼与异硫氰酸苯酯环合成1,2,4-三唑-5-硫酮的产率显著提高.     

甲基锍盐的合成

在四氟硼酸银存在下，分别以硫醚、硫醇、硫酚或过硫醚为原料与碘甲烷反应制备了相应的甲基锍盐。用１ＨＮＭＲ和１３ＣＮＭＲ表征产物的结构并提出了反应的机理。     

磺酸功能化纳米γ-Al2O3催化下合成硫醚类化合物

在磺酸功能化纳米γ-Al2O3催化下,以硫醇或硫酚和醇类化合物为原料,在室温、无溶剂条件下,高收率地实现了一系列硫醚类化合物的合成,产物结构经1H NMR,13C NMR和元素分析进行了表征.     

微波辐射对酶促合成甘油酯位置选择性的影响

研究了微波辐射和常规加热下脂肪酶Novozyme 435催化甘油与n-辛酸的反应。在2种加热模式下,n-辛酸与甘油反应的初速度随着反应温度(50~75℃)的升高而加快;同样条件下,微波辐射下的反应初速度略高于常规加热条件下的。微波辐射的产物中的2-单甘酯和1,2-二甘酯的含量增加,但仍明显低于1-单甘酯和1,3-二甘酯的含量,即微波辐射并未根本改变脂肪酶的1,3-专一性;但实验条件下微波辐射均削弱了Novozyme 435的1,3-专一性:微波辐射反应产物中1-单甘酯与2-单甘酯的量比由常规加热下的26.9~43.4下降为16.2~40.4,其中1,3-二甘酯与1,2-二甘酯的量比亦由10.5~19.6降为7.6~15.3。     

微波辐射下5-取代-2-硫代海因衍生物的合成

微波辐射下, 由硫氰酸铵与α-氨基酸通过两步反应合成了11种5-取代-2-硫代海因衍生物, 并用¹H NMR, IR和元素分析确证了中间产物和终产物的结构. 对比常规加热方法, 微波辐射具有反应时间短(4 min), 每步反应产率高(85%～93%)的优点. 同时对合成化合物2h的反应历程进行了讨论.     

螯合树脂研究 Ⅻ.以聚硫醚为主链的异丙巯基胺树脂的合成及其吸附性能

 由聚环硫氟丙烷与多乙烯多胺反应制得的聚合物(PB)再与环硫丙烷反应,合成了四种以聚硫醚为主链的异丙巯基胺树脂(PBM_1-4)。树脂对Au³⁺、Pd²⁺、Pt⁴⁺、Ag⁺和Hg²⁺等离子具有强的吸附能力,对Cu²⁺次之,对Zn²⁺和Pb²⁺很弱。树脂对贵金属具有高的选择性,能从含Au³⁺、Cr³⁺、Co²⁺、Ni²⁺、Cu²⁺、Mn²⁺、Zn²⁺和Fe³⁺的溶液中定量吸附Au³⁺而不吸附其它离子。     

硫酰化反应在硫酯类化合物合成中的研究进展

硫酰化反应作为合成硫酯类化合物的重要反应,广泛应用于有机合成、药物合成等研究领域。本文主要介绍了应用硫醇、硫酚和二硫醚与不同的酰化试剂在不同的条件下反应合成硫酯类化合物的研究进展。     

室温离子液体促进的5-亚芳基巴比妥酸衍生物的合成

在室温离子液体1-丁基-3-甲基咪唑四氟硼酸盐([bmim]BF₄)存在下, 采用室温研磨和微波辐射的方法, 由芳香醛和巴比妥酸或硫代巴比妥酸经Knoevenagel缩合反应, 制备了相应的5-亚芳基巴比妥酸或5-亚芳烃基硫代巴比妥酸衍生物. 在室温研磨条件下反应2 h, 产率为78%～96%, 在微波辐射功率为160 W时反应20 s, 产率为82%～98%, 产物结构经¹H NMR确证.     

微波促进下含苯并杂环芳硫醚的合成

在微波辐射条件下,通过巯基唑类化合物与芳基碘化物的反应,得到了系列芳基硫醚化合物.当微波输出功率为30 W、溶剂为N,N-二甲基甲酰胺(DMF)、反应时间为15 min时产率可达88%.同时,通过高效液相色谱分析法分别对微波辐射和传统油浴加热条件下的反应结果进行了讨论,结果表明:微波辐射条件下,反应选择性高、时间短、副产物少.此方法有望成为一种高效、温和、对环境友好的合成芳基硫醚的方法.     

The Synthesis of 1,3-bis(Phenylseleno)-2-Propanol Under Microwave Irradiation Conditions

A simple, rapid and efficient method for the synthesis of 1,3-bis(phenylseleno)-2-propanol under microwave irradiation is described.     

Preparative methods for (Z)-2-methoxy-1-phenylthio-1,3-butadienes. Rearrangement during copper(I)-induced elimination of thiophenol from some γ,δ-unsaturated thioacetals

(Z)-2-Methoxy-1-phenylthio-1,3-butadienes which are substituted with an alkyl group at the 4-position are not preparable by copper(I)-induced elimination of thiophenol from 4-alkyl-2-methoxy-1,1-bis(phenylthio)-3-alkenes; a 2-step stereospecific synthesis of one such diene ($\text{18}$) is described.     

Stable carbenes. Synthesis and properties of benzimidazol-2-ylidenes

A new stable crystalline carbene, 1,3-bis(1-adamantyl)benzimidazol-2-ylidene, was synthesized by decomposition of 1,3-bis(1-adamantyl)-2,3-dihydro-1H-benzimidazol-2-ylacetonitrile on heating under reduced pressure. Heteroaromatic 1,3-R₂-disubstituted benzimidazol-2-ylidenes, both stable (R = 1-Ad) and generated in situ (R = Me, Bzl), as well as 1,3,4,5-tetraphenylimidazol-2-ylidene (generated in situ), reacted with acetonitrile to give the corresponding insertion products, 1,3-disubstituted 2-cyanomethyl-2,3-dihidro-1H-(benz)-imidazoles. The geometric parameters of 1,3-bis(1-adamantyl)benzimidazol-2-ylidene, determined by X-ray analysis, suggest its lower aromaticity as compared to imidazol-2-ylidenes and 1,2,4-triazol-5-ylidenes. The structures of 2-cyanomethyl-2,3-dihydro-1H-benzimidazoles, 2-cyanomethyl-1,3,4,5-tetraphenyl-2,3-dihydro-1H-imidazole, and 1-(1-adamantyl)-5-cyanomethyl-3,4-diphenyl-4,5-dihydro-1H-1,2,4-triazole are characterized by partial conjugation in the heteroring; some compounds exhibit luminescence under UV irradiation. 1,3-Bis(1-adamantyl)benzimidazol-2-ylidene reacted with molecular sulfur in benzene to give 1,3-bis-(1-adamantyl)-2,3-dihydro-1H-benzimidazole-2-thione, but it failed to react with selenium under analogous conditions.     

Synthesis and electrochemistry of new octa-substituted metal-free and metallophthalocyanines

The synthesis and characterization of metal-free (H₂-Pc) and metal-containing (Zn, Co, and Cu) derivatives of a symmetrically octa-substituted phthalocyanine derived from 4,5-bis[2-(phenylthio)ethoxy]phthalonitrile were carried out by microwave irradiation. The electrochemical properties of the metal-free phthalocyanine 4 and metallophthalocyanine complexes 5 and 6 were investigated by cyclic voltammetry and differential pulse voltammetry. We have previously investigated the electrochemical properties of the tetra substituted 2-(phenylthio)ethoxy phthalocyanines. The reduction potential of the octa-substituted metal-free phthalocyanine shifted to more negative potential as a result of the electron donating of the 2-(phenylthio)ethoxy groups on the periphery compared to those of tetra substituted. The H₂Pc and ZnPc demonstrated ligand-based electron transfer processes, while CoPc complex has a metal-based reduction process. Similar aggregation behavior was observed for octa-substituted phthalocyanines. The compounds were characterized using IR, ¹H NMR, ¹³C NMR, elemental analysis, and MS spectral data.     

First general approach to cyclohex-3-ene-1,1-bis(phosphonates) by Diels-Alder cycloaddition of tetraethyl vinylidenebis(phosphonate) to 1,3-dienes

Tetraethyl vinylidenebis(phosphonate) (VBP) reacts smoothly with substituted 1,3-dienes at 90-110 degrees C without solvent to give the corresponding cyclohex-3-ene-1,1-bis(phosphonates) in good yields (60-85%). With nonsymmetrically substituted dienes, mixtures of regioisomers are obtained, the regioisomeric ratio being exclusively controlled by electronic effects. Danishefsky's diene allows tetraethyl 4-oxocyclohex-2-ene-1,1-bis(phosphonate) to be obtained in an 81% overall yield after the acid-catalyzed hydrolysis of the Diels-Alder cycloadduct. With 2,3-dimethoxy-1,3-butadiene, a mixture of regioisomeric dimethoxycyclohexene-1,1-bis(phosphonates) is formed by the VBP-catalyzed isomerization of the normal Diels-Alder cycloadduct. The mixture converges into tetraethyl 3,4-dimethoxycyclohex-2-ene-1,1-bis(phosphonate) at prolonged reaction times.     

新型双子表面活性剂在H2S和CO2盐水溶液中对碳钢的缓蚀性能

合成了一系列含有羟基的双子表面活性剂:1,3-双(十二烷基二甲基氯化铵)-2-丙醇(12-3OH-12),1,3-双(十四烷基二甲基氯化铵)-2-丙醇(14-3OH-14),1,3-双(十六烷基二甲基氯化铵)-2-丙醇(16-3OH-16)和1,3-双(十八烷基二甲基氯化铵)-2-丙醇(18-3OH-18).采用静态失重法、极化曲线和交流阻抗技术研究了其在H2S/CO2腐蚀环境中对L360钢的缓蚀作用.结果表明,三种研究方法取得的结论是一致的,缓蚀效果为14-3OH-14>12-3OH-12>16-3OH-16>18-3OH-18.其中,12-3OH-12和14-3OH-14都表现出很好的缓蚀效果,在35mg·L-1的较低浓度下缓蚀率就达95%以上.极化曲线测试结果表明n-3OH-n(n=12,14,16,18)型双子表面活性剂是一种以阳极抑制为主的混合型缓蚀剂.除n=18外,其它三种双子表面活性剂n-3OH-n(n=12,14,16)在L360钢表面的吸附服从朗缪尔等温线,并且属于物理和化学混合吸附.提出了一个用来解释双子表面活性剂在H2S/CO2溶液中缓蚀机理的吸附模型.     

瓜环与含羟基功能基二胺包结配合物的晶体结构及相互作用的研究

合成并表征了含羟基功能基的二胺1,3-二(2-氨基苯氧基)-2-丙醇(客体). 利用X射线衍射方法研究了客体与八元瓜环Q[8]所形成包结配合物的晶体结构. 结果表明主客体间形成了1∶2的包结配合物, 两个客体分子分别从瓜环的两个端口进入瓜环内腔, 在腔内两个客体分子中的苯环间存在着π-π相互作用. 利用1H NMR技术及紫外-可见吸收光谱对主客体间的相互作用进行考察, 所得结果与晶体结构吻合.     

Synthesis of 1,3-dithianes and 1,3-dithiolanes. Baker's yeast reduction and lipase-catalyzed resolution for synthesis of enantiopure derivatives.

Three 1,3-dithiolanes and four 1,3-dithianes have been synthesised from 1-(1,3-dithiolan-2-yl)-2-propanone and 1-(1,3-dithian-2-yl)-2-propanone, respectively. Asymmetric reductions of these ketones using baker's yeast gave the corresponding enantiopure (S)-alcohols. Baker's yeast also reduced the double bond in 3-(1,3-dithian-2-yl)-3-buten-2-one enantioselectively to give (S)-3-(1,3-dithian-2-yl)-2-butanone. 3-(1,3-Dithian-2-yl)-3-buten-2-one was also reduced chemo-selectively and the resulting 3-(1,3-dithian-2-yl)-3-buten-2-ol was resolved by transesterification in organic solvent using lipase B from Candida antarctica to yield the (S)-alcohol and the (R)-acetate with very high enantiomeric ratio, E. Racemic 1-(1,3-dithiolan-2-yl)-2-propanol and 1-(1,3-dithian-2-yl)-2-propanol were also resolved under similar conditions to give the (S)-alcohols and the corresponding (R)-acetates.     

Rhodium-catalyzed phenylthiolation reaction of heteroaromatic compounds using α-(phenylthio)isobutyrophenone

In the presence of catalytic amounts of RhH(PPh₃)₄ and 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-benzothiazoles, 1,3-benzoxazoles, and benzothiophene reacted with α-(phenylthio)isobutyrophenone giving 2-phenylthio derivatives. Reactive monocyclic heteroaromatics, 1-methyl-1,2,3,4-tetrazole and 2-cyanothiophene were also converted into the 5-phenylthio derivatives. The use of an appropriate phenylthio transfer reagent is crucial for the efficient catalyzed conversion of heteroaromatic C-H bonds into C-S bonds.     

Nickel-catalyzed acylstannylation and alkynylstannylation of 1,2-dienes

Carbostannylation of 1,2-dienes using acyl- and alkynylstannanes was achieved by means of nickel catalysis. In particular, acylstannylation of 1,2-dienes could be carried out with bis(1,5-cyclooctadiene)nickel [Ni(cod)₂] and acylstannanes to give selectively α-acylmethyl(vinyl)stannanes. The reaction was also applicable to acylstannanes prepared in situ by protonolysis of α-alkoxyalkenylstannanes or by reactions of α-silyloxyvinylstannanes with aldehyde acetals. For alkynylstannylation, a combination of Ni(cod)₂ and 1,3-bis(diphenylphosphino)propane (dppp) was found to be effective to afford α-alkynylmethyl(vinyl)stannanes, whereas the Ni(cod)₂-1,3-bis(dimethylphosphino)propane (dmpp) catalyst switched the regioselectivity to give (Z)-α-alkynylmethyl(alkenyl)stannanes. The acylstannylation products were successfully converted into various conjugated or unconjugated enones by a combination of cross-coupling and NaH-catalyzed isomerization. The alkynylstannylation products were transformed by cross- or homo-coupling reactions to various enynes or 2,3-bis(alkynylmethyl)-1,3-dienes, versatile precursors for variously substituted polycyclic compounds.