制备有机-无机杂化纳米材料的研究进展

有机-无机杂化纳米材料由于小尺寸和兼具有机、无机材料的各种优良性质,在许多领域都有巨大的应用潜质。本文介绍了模板法、嵌段聚合物自组装、含特殊官能团的乙烯基单体直接聚合法等制备纳米有机-无机杂化材料的方法,并对各自的特点进行了说明。     

无机纳米材料表面引发自由基可控聚合反应

无机纳米-高分子杂化材料具有优异的性能及广阔的应用前景,引起人们的广泛关注.本文综述了无机纳米材料表面引发自由基可控聚合反应在合成无机-高分子纳米杂化材料方面的广泛应用,包括表面引发原子转移自由基聚合(ATRP)、表面引发可逆加成-断裂链转移自由基聚合(RAFT)、表面引发稳定氮氧自由基聚合(NMP). 着重总结了近几年来这类杂化材料在功能性研究上新的进展,并对今后研究的发展趋势进行了展望.     

高折射率聚合物-无机纳米光学杂化材料的设计与制备及其应用

传统的高折射率聚合物光学材料,可以通过向聚合物中引入一些芳香环,含硫基团以及除氟以外的其他卤素原子来提高聚合物光学材料的折射率,但是就目前的研究现状来看,这类纯聚合物光学材料的折射率一般都低于1.8.而将具有高折射率的无机纳米粒子引入到聚合物中,所制备的聚合物-无机纳米光学材料的折射率能够达到1.8以上.而且这类高折射率聚合物-无机纳米光学杂化材料同时具有高分子光学材料和无机材料的双重优点,具有广泛的应用前景.鉴于当前高折射率聚合物-无机纳米光学杂化材料发展之迅速和其研究与开发的重要性,并结合目前国内外的研究现状,本文就高折射率聚合物-无机纳米光学杂化材料的设计、制备方法及其相关应用做一个比较系统的介绍,同时对这类材料在未来研究中所应注意的问题也提出了相应的看法.     

可聚合纳米无机氧化物杂化材料的制备及其在紫外光固化涂料中的应用

可聚合纳米无机氧化物杂化材料在紫外光固化涂料中具有较好的分散性能.与涂料中的单体和预聚物进行光聚合形成有机/无机杂化网络结构的聚合物,从而提高涂料固化膜的热稳定性能、硬度和耐磨性能等,在紫外光固化涂料的制备方面有着广阔的应用前景.目前,该类杂化材料主要采用硅烷偶联剂改性、化学接枝改性和溶胶一凝胶方法制备.本文就可聚合纳...     

Cd基化合物纳米晶-有机聚合物杂化太阳能电池研究进展

有机-无机杂化太阳能电池因其结合了有机材料和无机材料各自的优势而引起了人们的广泛关注和研究. Cd基化合物纳米晶因其具有制备方法简单、尺寸及形貌可控、载流子迁移率高和稳定性好等优点而成为最早被研究的一类无机受体. 本文介绍了有机-无机杂化太阳能电池的结构及原理, 分析了影响有机-无机杂化太阳能电池效率的三个主要因素, 分别是开路电压(V_oc)、短路电流(J_sc)和填充因子(FF). 从改善Cd基化合物纳米晶的合成方法, 增加Cd基化合物纳米晶和有机聚合物间的界面接触, 以及优化Cd基化合物纳米晶和有机聚合物所用溶剂和所占比例等方面阐述了近年来Cd基化合物纳米晶-有机聚合物杂化太阳能电池的研究进展. 并展望了Cd基化合物纳米晶-有机聚合物杂化太阳能电池的发展方向.     

过渡金属一取代Keggin结构钼磷酸盐掺杂的聚吡咯的制备、表征与导电性研究

０引言有机高分子－多酸导电聚合物是８０年代末兴起的一类新型有机－无机杂化材料。由于它兼有无机组分和有机聚合物基块的性能，并能衍生出新的导电性、光学性、耐摩擦、力学性能、功能梯度等，它现已成为材料科学和化学科学研究的前沿课题之一犤１犦。多酸是一类含有氧桥的多核配合物，具有强酸性、强氧化性、优良的催化活性、光致变色、电致变色性及高质子导电性等，可作为构建有机－无机杂化材料的基块犤２，３犦。聚吡咯是一类有机高分子，其合成简便、空气稳定性好、易于掺杂，通过掺杂可形成高电导率的高分子材料。若将多酸掺杂聚吡…     

聚合物纳米杂化材料的控制合成、自组装及功能化

聚合物纳米杂化材料的制备及功能化是当前国际前沿研究课题之一.特殊结构的聚合物可以通过分子间特殊相互作用,在纳米尺度上自发地组装成具有特殊结构和形态的集合体,这类材料在新材料、电子以及生物医学等领域具有广泛的应用前景.本文介绍国内外,特别是厦门大学在双亲性分子及嵌段共聚物的模板自组装、基于POSS单体纳米构筑单元以及POSS嵌段聚合物自组装的有机/无机纳米杂化材料、模板控制导电高分子材料纳米形态构筑等领域材料的可控合成和组装,与此同时对相关材料的性能及功能化应用进行了简要的讨论.     

聚(苯乙烯-马来酸酐)/Fe3O4纳米杂化材料的制备与表征

采用2,2,6,6-四甲基-1-哌啶氧化物(TEMPO)的溴盐对化学共沉淀法制备的Fe3O4纳米粒子进行表面修饰,以该粒子为过氧引发剂,苯乙烯(St)、马来酸酐(MA)为单体,采用"活性"/可控自由基聚合技术在粒子表面原位引发聚合,制备了聚(苯乙烯-马来酸酐)/Fe3O4纳米杂化材料,并对纳米Fe3O4及杂化材料进行了FT-IR、XRD、TGA、TEM和GPC表征。结果表明,所制备的纳米杂化材料的平均粒径约为70 nm,磁性粒子表面的聚合物分子链随着聚合时间的增长而增长。振动样品磁强计测试结果显示,在室温、外加磁场下,该纳米杂化材料呈现超顺磁性,饱和磁化强度随着包覆聚合物量的增加而降低。     

基于倍半硅氧烷的有机-无机杂化材料研究

有机-无机杂化材料兼具有机材料和无机材料的优点,是继单组份材料、复合材料和梯度材料之后的新一代功能材料。基于可以通过分子设计与剪裁的倍半硅氧烷(笼型倍半硅氧烷和无规倍半硅氧烷)无机前驱体,利用多种方法如反应性共混法、溶胶-凝胶法、光固化、原子转移自由基聚合、自组装技术等制备一系列高性能聚合物/倍半硅氧烷有机-无机纳米杂化材料。     

有机/无机纳米杂化材料载体化钛催化剂的聚合研究Ⅱ.间同聚苯乙烯制备

定向聚合;有机/无机纳米杂化材料载体化钛催化剂的聚合研究Ⅱ.间同聚苯乙烯制备     

Polyhydroxy and polyethyleneglycol (meth)acrylate polymers: physical properties and general studies for their use as electrophoresis matrices.

A new series of materials have been tested for their suitability as electrophoresis matrices. The mechanical and optical properties of gels composed of polyethyleneglycol (meth)acrylate esters or polyhydroxy (meth)acrylate esters in water and in various concentrations of organic solvents are described. Several crosslinkers including polyethyleneglycol and polyhydroxy di(meth)acrylates, piperazine diacrylate, and bisacrylamide were used in these studies. Electrophoretic migration and separation of a series of protein standards through polyethyleneglycol methacrylate (PEGM) 200, PEGM 400, and glyceryl methacrylate is demonstrated. Further, copolymerization of all of the monomers with acrylamide was performed and the distribution of monomer incorporation into the polymer network calculated. All monomers and copolymers that were examined by IR spectroscopy showed greater than 99% polymerization. These results justify their further study for biomolecule separations.     

Ligated anionic polymerization: An innovative elf-atochem technology for the polymerization of (meth)acrylates

Admittedly performing materials, (meth)acrylic polymers, used in a wide variety of applications, are traditionally produced by radical polymerization processes. The extension of living polymerization, originally developed for dienes and vinyl-aromatics, to (meth)acrylic polymers, would be an interesting opening to a variety of products with a large scope of properties and applications. However, this method suffers from chemical and technical limitations when applied to (meth)acrylates under the usual conditions of solvent and temperature. We report how alkoxy alkoxides-based systems combined with a recent Elf Atochem process offer attractive conditions for ultra-fast anionic polymerization of (meth)acrylates at high solid content. Applications to cost effective syndiotactic poly(methyl methacrylate) and block copolymers syntheses are described.     

Synthesis of thiol functionalized poly(meth)acrylates through enzymatic catalysis and a subsequent one pot reaction process

The synthesis and modification of thiol functionalized poly(meth)acrylates using a straightforward reaction concept that consists of an enzymatically catalyzed monomer synthesis, free radical polymerization and post-polymerization modification is presented. The well-known enzymatic transacylation of methyl acrylate and methyl methacrylate that runs under mild and environmentally friendly conditions was used to synthesize thiol protected acrylic and methacrylic monomers. Upon free radical polymerization and subsequent removal of protection groups, polymers with pendant thiol groups are obtained, which, in turn, can react in situ with Michael acceptors to form thiol-ene reaction products. The exceptional advantage of the proposed method is that upon removal of the enzyme from the monomer mixture, the polymerization, deprotection of thiols and subsequent Thio-Michael-type addition reaction can be conducted in one pot without purification of the intermediate products. Furthermore, the different reactivities of acetyl and benzoyl protection groups in lipase catalyzed reactions are discussed.     

（＋）-甲基丙烯酸{2,5-双[4′-（（S）-2-甲基丁氧基）苯基]苯基}酯的合成及其螺旋选择性自由基聚合

设计合成了手性单体（＋）-甲基丙烯酸{2,5-双[4′-（（S）-2-甲基丁氧基）苯基]苯基}酯,并进行了自由基溶液聚合.相比于单体,聚合物的比旋光度有显著的同向增长,且在其圆二色光谱上对应于三联苯侧基以及酯基的吸收区域呈现明显的Cotton效应,说明其主链可能采取某一旋向占优的螺旋构象.研究了聚合条件对聚合物旋光性质的影响.结果表明,采用极性大的芳香族溶剂或增加单体浓度有利于获得旋光度大的聚合物;随聚合温度增加,聚合物旋光度先增加后减小,在80℃时聚合达到最大值.该聚合物比甲基丙烯酸三芳基甲基酯类光学活性螺旋链聚合物具有更好的化学结构稳定性和立体结构稳定性.     

含POSS光刻胶材料研究进展

光致抗蚀剂又称光刻胶,是微电子加工过程中的关键材料。多面体低聚倍半硅氧烷（POSS）是一种具有规则的笼型结构的聚合物增强材料,由POSS改性的聚合物实现了有机-无机纳米杂化,POSS刚性结构的引入阻碍了聚合物分子的运动,可以显著提高聚合物的玻璃化转变温度（T_g）,降低聚合物的介电常数,提高聚合物的力学性能,也提高了含POSS光致抗蚀剂的耐蚀刻性。基于这些优点,含POSS的光刻胶材料得到广泛关注。本文对含POSS光刻胶的研究进展作了简要介绍。     

Transparent inorganic/organic copolymers by the Sol-Gel process: Copolymers of tetraethyl orthosilicate (TEOS), vinyl triethoxysilane (VTES) and (meth)acrylate monomers

Vinyl triethoxysilane (VTES) and (meth)acrylate monomers were mixed to create covalently bonded inorganic/organic copolymers, with and without tetraethyl orthosilicate (TEOS). Vinyl groups underwent free radical polymerization along with copolymerization with (meth)acryl groups of the monomer. For the two-monomer system, (meth)acrylate monomer and VTES, polymerization resulted in mechanically strong copolymers with flexure strengths greater than 40 MPa. Three-component materials obtained by polymerization of (meth)acrylate monomer, VTES and TEOS were homogeneous, highly transparent, with flexure strengths similar to those for silica xerogels, about 20 Mpa.     

Preparation,characterization and application of maleic anhydride-modified polylactic acid macromonomer based on direct melt polymerization

A one-pot two-step method based on direct melt polymerization (DMP) for the synthesis of polylactic acid (PLA) macromonomer and its further functionalized application has been developed. The first stage of the reaction is a copolycondensation of lactic acid (LA) and maleic anhydride (MAH) to obtain the macromolecule poly(lactic acid-co-maleic anhydride) (PLAM) with reactive double bonds, and the second stage is a radical copolymerization of different acrylates with PLAM to afford the modified PLA functional materials. The influences of the acrylates have been investigated. The results show that the species with substituted methyl groups in acrylate can polymerize relatively stable. On the other hand, the more carbon atoms in the ester segment of acrylate, the higher intrinsic viscosity [η] and terminal decomposition temperature for the acrylate-modified PLAMs. Among six kinds of acrylates used as the third monomer, such as acrylic acid (AA), methyl acrylate (MA), butyl acrylate (BA), methacrylic acid (MAA), methyl methacrylate (MMA), and butyl methacrylate (BMA), the BMA-modified PLAM has the biggest [η] (0.7566 dL/g) and the terminal decomposition temperature (418 °C) for there are more carbon atoms in BMA. Due to excellent reactivity of the intermediate PLAM, the final modified product can have the anticipated properties for the PLA material by the controllable regulating as different purposes. Thus, this strategy as a green and simple method provides well application prospect for PLA materials in industrial plastics, biomedicine etc.     

Synthesis of a Fragment of Crystalline Silicon: Poly(Cyclosilane)

We report a strategic synthesis of poly(cyclosilane), a well‐defined polymer inspired by crystalline silicon. The synthetic strategy relies on the design of a functionalized cyclohexasilane monomer for transition‐metal‐promoted dehydrocoupling polymerization. Our approach takes advantage of the dual function of the phenylsilyl group, which serves a crucial role both in the synthesis of a novel α,ω‐oligosilanyl dianion and as a latent electrophile. We show that the cyclohexasilane monomer prefers a chair conformation. The monomer design ensures enhanced reactivity in transition‐metal‐promoted dehydrocoupling polymerization relative to secondary silanes, such as methylphenylsilane. Comprehensive NMR spectroscopy yields a detailed picture of the polymer end‐group structure and microstructure. Poly(cyclosilane) has red‐shifted optical absorbance relative to the monomer. We synthesize a σ–π hybrid donor–acceptor polymer by catalytic hydrosilylation.     

Ab Initio Emulsion Atom‐Transfer Radical Polymerization

Stable latexes of poly(meth)acrylates with predetermined molecular weights, narrow molecular‐weight distributions, and controlled architecture were prepared by true ab initio emulsion atom‐transfer radical polymerization. Water‐soluble (macro)initiators in combination with a hydrophilic catalyst, Cu/tris(2‐pyridylmethyl)amine, initiated the polymerization in the aqueous phase. The catalyst strongly interacted with the surfactant sodium dodecyl sulfate (SDS), thereby tuning the polymerization within nucleated hydrophobic polymer particles. Long‐term stable latexes were obtained, even with SDS loading below 3 wt % relative to monomer. Block and gradient copolymers were prepared in situ. The reaction volume and solid content were successfully increased to 100 mL and 40 vol %, respectively, thus suggesting facile scale‐up of this technique. The proposed setup could be integrated in existing industrial plants used for emulsion polymerization.