Ultra thin V2O3 films grown on oxidized Si(1 1 1)

The growth of V₂O₃(0 0 0 1) has been investigated by scanning tunnelling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). Direct evaporation of vanadium onto the Si(1 1 1)-7 × 7 substrate gives rise to massive surface intermixing and consequent silicide formation. In order to obtain the vanadium oxide with good quality, the 7 × 7 surface was initially partially oxidized which leads to a smooth oxygen–silicon surface layer which in turn prevents a complete vanadium–silicon alloy formation. Finally a vanadium oxide film of V₂O₃ stoichiometry was created. The grown film exposes single crystalline areas of stepped surfaces which appear azimuthally randomly-oriented.     

Tetra-σ bonding adsorption of pyridine on Si(1 0 0)-2 × 1

We studied adsorption of pyridine on Si(1 0 0) at room temperature using high resolution photoemission spectroscopy (PES) and near edge X-ray adsorption fine structure (NEXAFS) in the partial electron yield (PEY) mode. The Si 2p, C 1s, N 1s spectra of pyridine on Si(1 0 0) showed that pyridine is chemisorbed on Si(1 0 0)-2 × 1 through the formation of the tetra-σ-bonded structure with the N atom and three C atoms. NEXAFS was conducted to characterize the adsorption geometry of pyridine on Si(1 0 0). The π* orbital of CC bond showed a good angle dependence in C K-edge NEXAFS spectra, and we were able to estimate the adsorption angle between chemisorbed pyridine of CC bond and the Si(1 0 0) surface using an analytical solution of NEXAFS intensity. We find the coexistence of two different tight bridges with the adsorption angles 42 ± 2° and 45 ± 2° with almost equal abundance.     

Atomic and electronic structure of group-IV adsorbates on the GaAs(0 0 1)-(1 × 2) surface

Ab initio calculations, based on pseudopotentials and density functional theory, have been performed to investigate the atomic and electronic structure of the group-IV adsorbates (C, Si, Ge, Sn, and Pb) on the GaAs(0 0 1)-(1 × 2) surface considered in two different models: (i) non-segregated Ga-IV-capped structure and (ii) segregated structure in which the group-IV atoms occupying the second layer while the As atom floats to the surface. The non-segregated structure is energetically more favorable than the segregated structure for Sn and Pb, whereas it is the other way around for C, Si, and Ge.     

Density-functional study of the CO chemisorption on bimetallic Pd–Sn(1 1 0) surfaces

We study the ordered PdSn c(2 × 2), (2 × 1), and PdSn₂ (3 × 1) overlayers deposited on Pd(1 1 0) by using first-principles density-functional calculations. It appears that the two PdSn structures are almost degenerate in the energy. Pd–Sn surfaces we consider do not display the marked buckling with Sn atoms displaced towards vacuum that is common for Pt–Sn surfaces. Low-coverage CO chemisorption at these overlayers and on analogous surface structures on Pd₃Sn is considered. It is shown that inclusion of an empirical correction to the CO adsorption energy changes the stable adsorption site from the long-bridge to the top one in most cases. The adsorption energy decreases with the number of Sn atoms in the vicinity of the adsorption site, and this property correlates well with the position of the centre of gravity of the local Pd d-electron band, and also with the variation of the local density of d-electron states at the Fermi level. The centre-of-gravity value is used to assess the core-level shifts for Pd atoms in various geometries. Most of the calculated data compare rather well with the recent measurements on Pd–Sn overlayers at Pd(1 1 0) as well as with other data on related bimetallic systems.     

Surface structures of in (√3 × √3 )R30° and (5√3 × 2) phases studied by surface extended X-ray absorption fine structure spectroscopy

The local surface structures of in the ( √3 × √3) R30° and (5√3 × 2) phases have been investigated by means of polarization-dependent sulfur K-edge surface EXAFS. In the (√3 × √3 ) R30° phase, sulfur adatoms are found to occupy threefold hollow sites with a S---Ni distance of 2.13 Å and an inclination angle ω of the Sz.sbnd;Ni bonds at 44° from the surface plane. In contrast, in the (5√3 × 2) phase, it is determined that the Sz.sbnd;Ni bond is longer, 2.18 Å, more inclined, ω = 31°, and that the coordination number is not 3 but 4. These results strongly support a picture involving reconstruction of the top nickel layer to form a rectangular structure. Consideration of several models proposed for the (5√3 × 2) phase leads to one which is compatible with both the present results and results recently reported using STM.     

Structural properties of Cu clusters on Si(1 1 1):Cu2Si magic family

Basing on the results of the scanning tunneling microscopy (STM) observations and density functional theory (DFT) calculations, the structural model for the Cu magic clusters formed on Si(1 1 1)7 × 7 surface has been proposed. Using STM, composition of the Cu magic clusters has been evaluated from the quantitative analysis of the Cu and Si mass transport occurring during magic cluster converting into the Si(1 1 1)‘5.5 × 5.5’-Cu reconstruction upon annealing. Evaluation yields that Cu magic cluster accommodates 20 Cu atoms with 20 Si atoms being expelled from the corresponding 7 × 7 half unit cell (HUC). In order to fit these values, it has been suggested that the Cu magic clusters resemble fragments of the Cu₂Si-silicide monolayer incorporated into the rest-atom layer of the Si(1 1 1)7 × 7 HUCs. Using DFT calculations, stability of the nineteen models has been tested of which five models appeared to have formation energies lower than that of the original Si(1 1 1)7 × 7 surface. The three of five models having the lowest formation energies have been concluded to be the most plausible ones. They resemble well the evaluated composition and their counterparts are found in the experimental STM images.     

X-ray diffraction study of Si(111)√3 × √3-Au

The structure of the Si(111)√3 × √3-Au surface has been investigated by the use of the surface X-ray diffraction with synchrotron radiation. The structure perpendicular to the surface was determined with respect to the Si bulk crystal. The results of least-squares analysis indicate that Au atoms are adsorbed on the Si substrate in which the first Si layer is missing. The heights of the Au layer and the Si second layer with respect to the intact Si third layer were estimated to be 3.09 ± 0.03 rA and 2.16 ± 0.10 rA, respectively. A possible model of the surface structure is proposed.     

LEED structure determination of the Ni(1 1 1)(√3×√3)R30°-Sn surface

Quantitative low energy electron diffraction has been used to determine the structure of the Ni(1 1 1)(√3×√3)R30°-Sn surface phase. The results confirm that the surface layer comprises a substitutional alloy of composition Ni₂Sn as previously found by low energy ion scattering (LEIS), and also shows that there is no stacking fault at the substrate/alloy interface as has been found in (√3×√3)R30°-Sb surface alloys on Ag and Cu(1 1 1). The surface alloy layer is rumpled with the Sn atoms 0.45 ± 0.03 Å higher above the substrate than the surrounding Ni atoms. This rumpling amplitude is almost identical to that previously reported on the basis of the LEIS study. Comparison with similar results for Sn-induced surface alloy phases on Ni(1 0 0) and Ni(1 1 0) shows a clear trend to reduced rumpling with reduced surface atomic layer density, an effect which can be rationalised in terms of the different effects of valence electron charge smoothing at the surface.     

Simulations of germanium epitaxial growth on the silicon (1 0 0) surface incorporating intermixing

We present kinetic lattice Monte Carlo simulations of Ge deposition onto a reconstructed Si (1 0 0) surface. We account for the exchange of Ge with Si atoms in the substrate, considering two different exchange mechanisms: a dimer exchange mechanism whereby Ge–Ge dimers on the surface become intermixed with substrate Si atoms, and the exchange of Ge atoms below the surface to relieve misfit strain. We examine how Si–Ge exchange affects the interface between the materials when the growth simulations are done at different temperatures.     

GaAs(0 0 1) (2 × 4) to c(4 × 4) transformation observed in situ by STM during As flux irradiation

Atomic resolution scanning tunnelling microscopy (STM) has been used to study in situ the As-terminated reconstructions formed on GaAs(0 0 1) surfaces in the presence of an As₄ flux. The relationship between the As-rich (2 × 4) and c(4 × 4) surfaces is observed throughout the gradual evolution of the reconstruction transformation. The results suggest that during the initial stage of the transformation, Ga-rich As-terminated variations of the c(4 × 4) form in order to accommodate excess mobile Ga produced by pit formation. These transient structures later planarize, as excess Ga is incorporated at step/island edges. Successive imaging of the same sample area during As₄ irradiation allows point-by-point adatom binding to be analysed in a way inaccessible to MBE–STM systems relying on sample quenching and transfer.     

An investigation of the Si(111)−(√3 × √3)R30°−Ag surface by Li impact collision ion scattering spectroscopy

The Si(111)−(√3 × √3)R30°−Ag surface has been investigated using the technique of Li⁺ impact collision ion scattering spectroscopy. Typical LEED √3 domain sizes were estimated to be on the order of 150 Å for a 1 ML coverage of Ag, with the √3 structure persisting for coverages of Ag up to 35 ML. Silver islanding was found to influence the appearance of the 5 keV Li⁺ ICISS angular scans even for 1 ML coverages of Ag deposited at 480°C. A detailed structural analysis of the Si(111)−√3−Ag surface (0.25 ML deposition) involved the comparison of 5 keV Li⁺ ICISS experimental data along the [11 ], [ 10] and [2 1] azimuths with computer simulations of the scattered ion intensities based on previously proposed models for the √3 surface. Nine structurally different models were tested, and only the missing-top-layer (MTL) and the honeycomb-chained-trimer (HCT) models were found to be consistent with all the experimental results. An estimate of 0.4 Å for the maximum downward vertical displacement of the Ag atoms with resect to the surface Si atoms in the MTL model is made. The effects of increased thermal vibrational amplitude in the simulation of Si---Ag shadowing effects is also discussed. The interpretations of previous noble gas ICISS results are shown to be inconsistent with the present alkali metal ICISS study of the √3 surface.     

Growth of (√3 × √3)-Ag and (1 1 1) oriented Ag islands on Ge/Si(1 1 1) surfaces

We have studied the growth of Ag on Ge/Si(1 1 1) substrates. The Ge/Si(1 1 1) substrates were prepared by depositing one monolayer (ML) of Ge on Si(1 1 1)-(7 × 7) surfaces. Following Ge deposition the reflection high energy electron diffraction (RHEED) pattern changed to a (1 × 1) pattern. Ge as well as Ag deposition was carried out at 550 °C. Ag deposition on Ge/Si(1 1 1) substrates up to 10 ML has shown a prominent (√3 × √3)-R30° RHEED pattern along with a streak structure from Ag(1 1 1) surface. Scanning electron microscopy (SEM) shows the formation of Ag islands along with a large fraction of open area, which presumably has the Ag-induced (√3 × √3)-R30° structure on the Ge/Si(1 1 1) surface. X-ray diffraction (XRD) experiments show the presence of only (1 1 1) peak of Ag indicating epitaxial growth of Ag on Ge/Si(1 1 1) surfaces. The possibility of growing a strain-tuned (tensile to compressive) Ag(1 1 1) layer on Ge/Si(1 1 1) substrates is discussed.     

Stabilization of the (1 1 0) tetragonal zirconia surface by hydroxyl chemical transformation

Different hydroxyl coverages on the (1 1 0) and (1 0 1) surfaces of tetragonal zirconia have been studied with periodic density functional theory. The tetragonal zirconia (1 1 0) surface is polar and intrinsically unstable. It is however very efficiently stabilized by hydroxyl formation which decreases the effective charge of surface oxygen atoms and hence avoids the electrostatic instability. The hydroxylation induces a strong stabilization of the (1 1 0) surface with respect to the non-polar (1 0 1) termination, and explains why the (1 1 0) surface of ZrO₂ can be found in some catalytic preparations. Surface chemical transformation appears to be a more efficient way to stabilize the (1 1 0) surface in comparison with the surface reconstruction processes.     

Perturbation of Ge(1 1 1) and Si(1 1 1)√3α-Sn surfaces by adsorption of dopants

We test the response of the √3 × √3α reconstructions formed by 1/3 monolayer of tin adatoms on silicon and germanium (1 1 1) surfaces upon doping with electrons or holes, using potassium or iodine as probes/perturbers of the initial electronic structures. From detailed synchrotron radiation photoelectron spectroscopy studies we show that doping with either electrons or holes plays a complimentary role on the Si and Ge surfaces and, especially, leads to complete conversion of the Sn 4d two-component spectra into single line shapes. We find that the low binding energy component of the Sn core level for both Si and Ge surfaces corresponds to Sn adatoms with higher electronic charge, than the Sn adatoms that contribute to the core level high binding energy signal. This could be analyzed as Sn adatoms with different valence state.     

Theoretical investigation of Mn adsorbates aside self-organised Bi nanolines on hydrogenated Si(0 0 1) surface

We have theoretically investigated the atomic structure, magnetic behaviour, and electronic properties of Mn adsorbates on hydrogen passivated self-organised Bi nanolines on the Si(0 0 1)surface. It is found that the most stable geometry for monolayer (ML) coverage of Mn is just underneath the first Si(0 0 1) surface layer. The Mn atoms in the optimised configuration are seven-fold coordinated with their neighbouring Si atoms. Total energy calculations suggest that the Mn adsorbates form a degenerate state of ferromagnetic and anti-ferromagnetic lines parallel and adjacent to the self-assembled Bi lines. The density functional band structure calculation within the local-spin density approximation shows that the ferromagnetic system behaves like a metal in both spin channels. On the other side, the anti-ferromagnetic phase exhibits a half-metallic phenomenon with semiconducting character for the majority spin channel and semi-metallic character for the minority spin channel.     

Structure and reaction pathways of methyl lactate on Pd(1 1 1)

The adsorption and reaction of methyl lactate (CH₃CH(OH)COOCH₃) is studied in ultrahigh vacuum on a Pd(1 1 1) surface using temperature-programmed desorption (TPD) and reflection–absorption infrared spectroscopy (RAIRS). Methyl lactate reacts at relatively low temperatures (220 K) by O–H bond scission. This intermediate can either react with hydrogen to reform methyl lactate at 280–300 K or undergo β-hydride elimination to form flat-lying methyl pyruvate. This decomposes to form acetyl and methoxy carbonyl species as found previously following methyl pyruvate adsorption on Pd(1 1 1). These species predominantly react to form carbon monoxide, methane and hydrogen.     

Adsorption of an organic zwitterion on a Si(1 1 1)-7 × 7 surface at room temperature

The couple sulfonato/Si(1 1 1)-7 × 7 leads to remarkable 2D chiral molecular assembly with a stability improved at room temperature. The voltage-dependency of the STM images has been experimentally investigated and the correlation between STM images and PDOS has been studied. The proposed empirical model of the adsorption of molecules on Si(1 1 1)-7 × 7 has been justified by the experimental and theoretical data.     

Boron and indium incorporation in GaP(0 0 1) surfaces by vapour deposition: Density-functional supercell calculations of the surface stability

Using surface supercells and the density-functional method, surface formation energies are calculated for probable GaP(0 0 1) reconstructions without and with indium or/and boron substitutions. Obtained surface stability diagrams provide surface compositions and surface structures in dependence on the growth conditions: indium atoms are built into the c(4 × 4) patterns under strongly P-rich conditions and into the β2(2 × 4) reconstruction under less P-rich conditions. Under In-rich and non-P-rich conditions, initial structures of metallic InGa phases are formed in the (2 × 4) mixed-dimer reconstruction. In the c(4 × 4) and (2 × 4) mixed-dimer patterns the full range of In:Ga content is accessible by variation of the In:Ga ratio in the gas phase. Boron can be built into the c(4 × 4) patterns of the GaP(0 0 1) surface in form of isolated atoms or nearest-neighbours under strongly P-rich and moderately to strongly B-rich conditions. The boron incorporation is strongly enhanced at the surface in respect to theoretical predictions for the bulk, what explains the larger content found experimentally. Assuming P-rich conditions, which are suitable for the growth of the ternary alloys, the obtained surface stability diagram for the quaternary (BInGa)P shows that nearly the full range of In:Ga content is accessible. However, the boron content in the alloy is restricted as found analogously for (BGa)P and is independent of the indium content. The expected increase of the boron content in presence of indium cannot be confirmed. Contrary to the analogous GaAs systems, boron atoms do not substitute phosphor atoms (antisite position) in GaP, (InGa)P, (BGa)P, and (BInGa)P.     

A structural study of a C3H3 species coadsorbed with CO on Pd(1 1 1)

The combination of chemical-state-specific C 1s scanned-energy mode photoelectron diffraction (PhD) and O K-edge near-edge X-ray absorption fine structure (NEXAFS) has been used to determine the local adsorption geometry of the coadsorbed C₃H₃ and CO species formed on Pd(1 1 1) by dissociation of molecular furan. CO is found to adopt the same geometry as in the Pd(1 1 1)c(4 × 2)-CO phase, occupying the two inequivalent three-fold coordinated hollow sites with the C–O axis perpendicular to the surface. C₃H₃ is found to lie with its molecular plane almost parallel to the surface, most probably with the two ‘outer’ C atoms in equivalent off-atop sites, although the PhD analysis formally fails to distinguish between two distinct local adsorption sites.     

Surface state on the SiC(0001)-(√3 × √3) surface

An angle resolved photoemission study of a surface state on the SiC(0001)-(√3 × √3) surface is reported. Experiments carried out on the 6H and 4H polytypes give essentially identical results. A surface state band with semiconducting occupation is observed, centered around 1.0 eV above the valence band maximum (VBM) and with a width of about 0.2 eV. Recently calculated results for a Si-adatom-induced √3 × √3 reconstruction give a metallic surface state band centered about 1.2 eV above the VBM and with a width of 0.35 eV. The dispersion determined experimentally is smaller than calculated but exhibits the same trend, the surface state disperses downwards towards the VBM with increasing parallel wavevector component along both the qG--- and qG--- directions of the √3 × √3 surface Brillouin zone. The VBM is determined to be located at about 2.3(±0.2) eV below the Fermi level. The results indicate that Si adatoms on top of an outermost Si---C bilayer may be an inadequate structural model for explaining recent experimental findings for the SiC(0001)-(√3 × √3) surface.