Convenient Synthesis of Piperazine Substituted Quinolones

A series of 1‐[(4‐hydroxy‐2‐oxo‐1‐phenyl‐1,2‐dihydroquinolin‐3‐yl)carbonyl]‐4‐(substituted) piperazines 3a–c and methyl 2‐[(4‐hydroxy‐2‐oxo‐1‐phenyl‐1,2‐dihydroquinolin‐3‐yl)carbonylamino] alkanoates 5a–d has been developed by the direct condensation of ethyl [4‐hydroxy‐2‐oxo‐1‐phenyl‐1,2‐dihydro‐3‐quinoline] carboxylate 2 with N ¹‐monosubstituted piperazine hydrochlorides or amino acid ester hydrochloride in the presence of triethyl amine. The quinolone amino acid esters 5a–d were the key intermediate for the preparation of a series of 1‐[2‐((4‐hydroxy‐2‐oxo‐1‐phenyl‐1,2‐dihydroquinolin‐3‐yl)carbonylamino)alkylcarbony]‐4‐substituted piperazine derivatives 8–11 (a‐d) via azide coupling method with amino acid ester hydrochloride.     

A simple,selective, and sensitive gas chromatography–mass spectrometry method for the analysis of five process‐related impurities in atenolol bulk drug and capsule formulations

An extremely sensitive and simple gas chromatography with mass spectrometry method was developed and completely validated for the analysis of five process‐related impurities, viz., 4‐hydroxy‐l ‐phenylglycine, 4‐hydroxyphenylacetonitrile, 4‐hydroxyphenylacetic acid, methyl‐4‐hydroxyphenylacetate, and 2‐[4‐{(2RS )‐2‐hydroxy‐3‐[(1‐methylethyl)amino]propoxy}phenyl]acetonitrile, in atenolol. The separation of impurities was accomplished on a BPX‐5 column with dimensions of 50 m × 0.25 mm i.d. and 0.25 μm film thickness. The method validation was performed following International Conference on Harmonisation guidelines in which the method was capable to quantitate 4‐hydroxy‐l ‐phenylglycine, 4‐hydroxyphenylacetonitrile, and 4‐hydroxyphenylacetic acid at 0.3 ppm, and methyl‐4‐hydroxyphenylacetate and 2‐[4‐{(2RS )‐2‐hydroxy‐3‐[(1‐methylethyl)amino]propoxy}phenyl]acetonitrile at 0.35 ppm with respect to 10 mg/mL of atenolol. The method was linear over the concentration range of 0.3–10 ppm for 4‐hydroxy‐l ‐phenylglycine, 4‐hydroxyphenylacetonitrile, and 4‐hydroxyphenylacetic acid, and 0.35–10 ppm for methyl‐4‐hydroxyphenylacetate and 2‐[4‐{(2RS )‐2‐hydroxy‐3‐[(1‐methylethyl)amino]propoxy}phenyl]acetonitrile. The correlation coefficient in each case was found ≥0.998. The repeatability and recovery values were acceptable, and found between 89.38% and 105.60% for all five impurities under optimized operating conditions. The method developed here is simple, selective, and sensitive with apparently better resolution than the reported methods. Hence, the method is a straightforward and good quality control tool for the quantitation of selected impurities at trace concentrations in atenolol.     

Phenolic Derivatives from the Root Bark of Oplopanax horridus

Four new phenolic derivatives, including two phenylpropanoid glycosides, one benzoate glycoside, and one lignan glycoside, together with one known glyceride, were isolated from the root bark of Oplopanax horridus. The structures of the new compounds were elucidated as 3‐{4‐[(6‐O‐acetyl‐β‐D ‐glucopyranosyl)oxy]‐3,5‐dimethoxyphenyl}propanoic acid ( 1 ), (+)‐[5,6,7,8‐tetrahydro‐7‐(hydroxymethyl)‐10,11‐dimehoxydibenzo[a,c][8]annulen‐6‐yl]methyl β‐D ‐glucopyranoside ( 2 ), (+)‐methyl 4‐[6‐O‐{3‐hydroxy‐3‐methyl‐5‐(1‐methylpropyl)oxy]‐5‐oxopentanoyl}‐4‐O‐(β‐D ‐glucopyranosyl)‐β‐D ‐glucopyranosyl)oxy]‐3‐methoxybenzoate ( 3 ), and 2‐methoxy‐4‐[(1E)‐3‐methoxy‐3‐oxoprop‐1‐en‐1‐yl]phenyl 6‐O‐{3‐hydroxy‐3‐methyl‐5‐[(1‐methylpropyl)oxy]‐5‐oxopentanoyl‐4‐O‐β‐d‐ glucopyranosyl‐β‐d‐ glucopyranoside ( 4 ) on the basis of spectroscopic techniques including NMR and MS analyses. The known compound was identified as glycer‐2‐yl ferulate ( 5 ) by comparing its physical and spectral data with those reported in the literature.     

Novel 5‐Methyl‐2‐[(un)substituted phenyl]‐4‐{4,5‐dihydro‐ 3‐[(un)substituted phenyl]‐5‐(1,2,3,4‐tetrahydroisoquinoline‐2‐yl)pyrazol‐1‐yl}‐oxazole Derivatives: Synthesis and Anticancer Activity

Eleven novel 5‐methyl‐2‐[(un)substituted phenyl]‐4‐{4,5‐dihydro‐3‐[(un)substituted phenyl]‐5‐(1,2,3,4‐tetrahydroisoquinoline‐2‐yl)pyrazol‐1‐yl}‐oxazole derivatives were synthesized and characterized by elemental analysis, ESI‐MS, ¹H NMR and ¹³C NMR. All of the compounds have been screened for their antiproliferative activities against PC‐3 cell (human prostate cancer) and A431 cell (human epidermoid carcinoma cancer) lines in vitro. The results revealed that compounds 4g , 4j and 4k exhibited the strong inhibitory activities against the PC‐3 cell lines (with IC₅₀ values of 2.8±0.11, 3.1±0.10 and 3.0±0.06 μg/mL, respectively).     

Synthesis and antimicrobial and pharmacological properties of new thiosemicarbazide and 1,2,4‐triazole derivatives

Reaction of 4‐phenyl‐4H‐1,2,4‐triazole‐3‐thione with ethyl bromoacetate has led to the formation of ethyl [(4‐phenyl‐4H‐1,2,4‐triazol‐3‐yl)sulfanyl]acetate 1 , the structure of which was confirmed by X‐ray analysis. In the next reaction with 80% hydrazide hydrate, appropriate hydrazide 2 was obtained, which in reaction with isothiocyanates was converted to new acyl derivatives of thiosemicarbazides 2 , 3 , 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h . The cyclization of these compounds in alkaline media has led to formation of new derivatives of 5‐{[(4‐phenyl‐4H‐1,2,4‐triazole‐3‐yl)sulfanyl]methyl}‐4H‐1,2,4‐triazole‐3(2H)‐thiones 4a , 4b , 4c , 4d , 4e , 4f , 4g , 4j . The structure of the compounds was confirmed by elementary analysis and IR, ¹H‐NMR, ¹³C‐NMR, and MS spectra. Compounds 2 , 3 , 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h and 4a , 4b , 4c , 4d , 4e , 4f , 4g were screened for their antimicrobial activities, and the influence of the compounds 4a , 4b , and 4e , 4f , 4g on the central nervous system of mice in behavioral tests was examined. J. Heterocyclic Chem., (2011).     

Synthesis of 4‐(1‐phenyl‐1H‐pyrazol‐3‐yl)‐[1,2,4]triazolo[4,3‐a]quinoxalines and their 4‐halogenopyrazolyl analogs

Synthesis of {3‐[1‐(ethoxycarbonyl)‐[1,2,4]triazolo[4,3‐a]quinoxalin‐4‐yl]‐1‐phenyl‐1H‐pyrazol‐5‐yl}methyl ethyl oxalate ( 2 ), ethyl 4‐[5‐(acetoxymethyl)‐1‐phenyl‐1H‐pyrazol‐3‐yl]‐[1,2,4]triazolo[4,3‐a]quioxaline‐1‐carboxylate ( 4 ), [4‐halo‐1‐phenyl‐3‐(1‐phenyl‐[1,2,4]triazolo[4,3‐a]quioxalin‐4‐yl)‐1H‐pyrazol‐5‐yl]methyl acetate ( 11 ), {4‐halo‐3‐[1‐methyl‐[1,2,4]triazolo[4,3‐a]quinoxalin‐4‐yl]‐1‐phenyl‐1H‐pyraz‐ol‐5‐yl}methyl acetate ( 13 ), and [3‐([1,2,4]triazolo‐[4,3‐a]quinoxalin‐4‐yl)‐4‐halo‐1‐phenyl‐1H‐pyrazol‐5‐yl] methyl formate ( 15 ) was accomplished. The structural investigation of the new compounds is based on chemical and spectroscopic evidences. J. Heterocyclic Chem., (2011)     

Amphiphilic block glycopolymers via atom transfer radical polymerization: Synthesis,self‐assembly and biomolecular recognition

In this work the synthesis of poly(butyl acrylate)‐b‐poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate) (PBA‐b‐PHEMAGl) diblock glycopolymer and poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate)‐b‐poly(butyl acrylate)‐b‐poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate) (PHEMAGl‐b‐PBA‐b‐PHEMAGl) was performed via atom transfer radical polymerization. Monofunctional and difunctional poly(butyl acrylate) macroinitiators were used to synthesize the well‐defined diblock and triblock glycopolymers by chain extension reaction with the glycomonomer HEMAGl. The self‐assembly of these glycopolymers in aqueous solution was studied by dynamic light scattering and transmission electron microcopy, showing the coexistence of spherical micelles and polymeric vesicles. In addition, the biomolecular recognition capacity of these micelles and vesicles, containing glucose moieties in their coronas, was investigated using the lectin Concanavalin A, Canavalia Ensiformis, which specifically interacts with glucose groups. The binding capacity of Concanavalin A with glycopolymer is influenced by the copolymer composition, increasing with the length of HEMAGl glycopolymer segment in the block copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Sulfonamide‐derived compounds and their transition metal complexes: synthesis,biological evaluation and X‐ray structure of 4‐bromo‐2‐[(E)‐{4‐[(3,4‐dimethylisoxazol‐5 yl)sulfamoyl]phenyl} iminiomethyl] phenolate

Sulfonamide‐derived new ligands, 4‐({[(E)‐(5‐bromo‐2‐hydroxyphenyl)methylidene]‐amino}methyl)benzenesulfonamide and 4‐bromo‐2‐((E)‐{4‐[(3,4‐dimethylisoxazol‐5‐yl)sulfamoyl]phenyl}iminiomethyl)phenolate and their transition metal [cobalt(II), copper(II), nickel(II) and zinc(II)] complexes were synthesized and characterized. The nature of bonding and structure of all the synthesized compounds were deduced from physical (magnetic susceptibility and conductivity measurements), spectral (IR, ¹H and ¹³C NMR, electronic, mass spectrometry) and analytical (CHN analysis) data. The structure of the ligand, 4‐bromo‐2‐((E)‐{4‐[(3,4‐dimethylisoxazol‐5‐yl)sulfamoyl]phenyl} iminiomethyl)phenolate was also determined by X‐ray diffraction method. An octahedral geometry was suggested for all the complexes. In order to evaluate the biological activity of the ligands and the effect of metals, the ligands and their metal complexes were screened for in vitro antibacterial, antifungal and cytotoxic activity. The results of these studies revealed that all compounds showed moderate to significant antibacterial activity against one or more bacterial strains and good antifungal activity against various fungal strains. Copyright © 2011 John Wiley & Sons, Ltd.     

Design,synthesis, in silico analysis with PPAR‐γ receptor and study of non‐covalent interactions in unsymmetrical heterocyclic/phenyl fleximer

This work deals with the design, synthesis, in silico analysis, crystallization, and the interpretation 2‐cyano‐3‐{4‐[2‐(phthalimid‐nyl)‐propoxy]‐phenyl}‐acrylic acid ethyl ester (7). Analog 7 is designed based on rosiglitazone. The quantitative analysis of Compound 7 has been performed through single‐crystal X‐Ray Diffraction (XRD) and Hirshfeld surface analysis. Fleximer 7 has studied the role of flexibility in non‐covalent interactions and binding affinity with PPAR‐γ receptors. Both phthalimide ring and phenyl rings are linked with propylene linker. 2‐cyano‐3‐{4‐[2‐(phthalimid‐nyl)‐propoxy]‐phenyl}‐acrylic acid ethyl ester has Z = 8 in the crystal packing and stabilized by intermolecular non‐covalent interactions like C? H…O, C? H…N, C? H…л, and л…л, and so forth.     

Six closely related 4,6‐disubstituted 2‐amino‐5‐formylpyrimidines: different ring conformations,polarized electronic structures,and hydrogen‐bonded assembly in zero,one, two and three dimensions

In each of ethyl N‐{2‐amino‐5‐formyl‐6‐[methyl(phenyl)amino]pyrimidin‐4‐yl}glycinate, C₁₆H₁₉N₅O₃, (I), N‐{2‐amino‐5‐formyl‐6‐[methyl(phenyl)amino]pyrimidin‐4‐yl}glycinamide, C₁₄H₁₆N₆O₂, (II), and ethyl 3‐amino‐N‐{2‐amino‐5‐formyl‐6‐[methyl(phenyl)amino]pyrimidin‐4‐yl}propionate, C₁₇H₂₁N₅O₃, (III), the pyrimidine ring is effectively planar, but in each of methyl N‐{2‐amino‐6‐[benzyl(methyl)amino]‐5‐formylpyrimidin‐4‐yl}glycinate, C₁₆H₁₉N₅O₃, (IV), ethyl 3‐amino‐N‐{2‐amino‐6‐[benzyl(methyl)amino]‐5‐formylpyrimidin‐4‐yl}propionate, C₁₈H₂₃N₅O₃, (V), and ethyl 3‐amino‐N‐[2‐amino‐5‐formyl‐6‐(piperidin‐4‐yl)pyrimidin‐4‐yl]propionate, C₁₅H₂₃N₅O₃, (VI), the pyrimidine ring is folded into a boat conformation. The bond lengths in each of (I)–(VI) provide evidence for significant polarization of the electronic structure. The molecules of (I) are linked by paired N—H...N hydrogen bonds to form isolated dimeric aggregates, and those of (III) are linked by a combination of N—H...N and N—H...O hydrogen bonds into a chain of edge‐fused rings. In the structure of (IV), molecules are linked into sheets by means of two hydrogen bonds, both of N—H...O type, in the structure of (V) by three hydrogen bonds, two of N—H...N type and one of C—H...O type, and in the structure of (VI) by four hydrogen bonds, all of N—H...O type. Molecules of (II) are linked into a three‐dimensional framework structure by a combination of three N—H...O hydrogen bonds and one C—H...O hydrogen bond.     

Preparation of poly(2‐anilinoethanol) containing azobenzene group under electrical field and its liquid crystalline properties investigation

In this project, 2‐[N‐ethyl‐N‐[4‐[(4′‐nitrophenyl)azo]‐phenyl]amino]ethanol (Disperse Red‐I) was prepared by adding of (N‐ethyl‐2‐anilinoethanol) with the salt diazonium p‐nitroaniline. The main mesogenic liquid crystalline (LC) 2‐[N‐ethyl‐N‐[4‐[4′‐nitrophenyl)azo]‐phenyl]amino]ethyl‐3‐chloro propionate (Disperse Red‐II) was synthesized by reaction of disperse Red I and 3‐chloropropanoeic acid at the alkaline condition. Then 2‐anilinoethyl‐3‐chloropropionate‐{2‐[ethyl[4‐[(4′‐nitrophenyl)azo]phenyl]amino] ethanol}, (2AECP‐Red‐I) was prepared via reaction of disperse red‐II and 2‐anilinoethanol. On the other hand, poly 2‐anilinoethyl‐3‐chloropropionate‐{2‐[ethyl[4‐[(4′‐nitrophenyl)azo]phenyl]amino]ethanol} and poly(2AECP‐Red‐I) have been synthesized by polymerization of 2AECP‐Red‐I in two separate schemes. These include polymerization in the absence of electric field (EF) and polymerization under different EFs. A comparison of the results reveals that the polymer produced under electric field is more linear, regular in shape with high electrical conductivity, as well as good LC behavior with semectic texture. The resulted monomer and poly(2AECP‐Red‐I) are characterized by using Fourier transform infrared and ultraviolet–visible and were studied by thermogravimetric analysis and differential scanning calorimetry. Scanning electron microscopy images supported the formation of poly(2AECP‐Red‐I) and showed morphology feature and homogeneous structure on poly(2AECP‐Red‐I). Electrical conductivity of poly(2AECP‐Red‐I) has been studied by four‐point probe method. Copyright © 2014 John Wiley & Sons, Ltd.     

Zn2+ Complexes of 3,5‐Bis[(1,5,9‐triazacyclododecan‐3‐yloxy)methyl]phenyl Conjugates of Oligonucleotides as Artificial RNases: The Effect of Oligonucleotide Conjugation on Uridine Selectivity of the Cleaving Agent

2‐(3,5‐Bis{[1,5,9‐tris(trifluoroacetyl)‐1,5,9‐triazacyclododecan‐3‐yloxy]methyl}phenoxy)ethanol was synthesized and converted to a O‐(2‐cyanoethyl)‐N,N‐diisopropylphosphoramidite building block, 12 . 2′‐O‐Methyl oligoribonucleotides incorporating a 2‐[(2S,4S,5R)‐4‐hydroxy‐5‐(hydroxymethyl)tetrahydrofuran‐2‐yl)ethyl 4‐oxopentanoate or a 2‐{2‐[2‐({[(2R,4S,5R)‐4‐hydroxy‐5‐(hydroxymethyl)tetrahydrofuran‐2‐yl]acetyl}amino)ethoxy]ethoxy}ethyl 4‐oxopentanoate non‐nucleosidic unit close to the 3′‐terminus were assembled on a solid support, the 4‐oxopentanoyl protecting groups were removed by treatment with hydrazinium acetate on‐support, and 12 was coupled to the exposed OH function. The deprotected conjugates were purified by HPLC, and their ability to cleave a complementary RNA containing either uridine or some other nucleoside at the potential cleaving site was compared. Somewhat unexpectedly, conjugation to an oligonucleotide did not enhance the catalytic activity of the Zn²⁺? bis(azacrown) complex and virtually abolished its selectivity towards the uridine sites.     

Development and validation of a high‐performance liquid chromatography–tandem mass spectrometry method for the determination of the novel proteasome inhibitor CEP‐18770 in human plasma and its application in a clinical pharmacokinetic study

CEP‐18770, [(1R)‐1‐{[(2S,3R)‐3‐hydroxy‐2‐{[(6‐phenyl‐2‐pyridinyl)carbonyl]amino}butanoyl]amino}‐3‐methylbutyl]boronic acid, is a novel proteasome inhibitor, now under early clinical evaluation as an anticancer agent. To investigate its clinical pharmacokinetics, a high‐performance liquid chromatography–tandem mass spectrometry (HPLC–MS/MS) method was developed and validated to measure the drug in human plasma, based on simple protein precipitation with acetonitrile after the addition of irbesartan as internal standard. The method requires a small volume of sample (100 µl) and is rapid and selective, allowing good resolution of peaks in 5 min. It is sensitive, precise and accurate, with overall precision, expressed as coefficient of variation (CV%), always < 10.0%, accuracy in the range 93.8–107.7% and high recovery, close to 100%. The limit of detection is 0.01 ng/ml and the lower limit of quantitation (LLOQ) is 0.20 ng/ml. The assay was validated in the range from the LLOQ up to 50.00 ng/ml. This is the first method developed and validated for analyzing a proteasome inhibitor with a boronic‐acid‐based structure in human plasma. The method was successfully applied to study the pharmacokinetics of CEP‐18770 in cancer patients with solid tumors or multiple myeloma who had received the drug as a short intravenous bolus during the initial Phase I trial. Copyright © 2010 John Wiley & Sons, Ltd.     

The structure of glibenclamide in the solid state

The structure of glibenclamide, 5‐chloro‐N‐(2‐{4‐[(cyclohexylamino)carbonyl] aminosulfonyl}phenyl) ethyl)‐2‐methoxybenzamide, an important antidiabetic drug, has been studied both in solution and in the solid state by a combination of NMR spectroscopy and theoretical calculations. The possibility that glibenclamide suffers a tautomerization under melting to afford a desmotrope was rejected. Copyright © 2012 John Wiley & Sons, Ltd.     

New Convenient Five‐Component One‐Pot Synthesis of 3‐Alkyl‐6‐amino‐1,4‐dihydro‐4‐{[(1,2,3‐triazol‐4‐yl)methoxy]phenyl}pyrano[2,3‐c]pyrazole‐5‐carbonitrile Derivatives

3‐Alkyl‐6‐amino‐1,4‐dihydro‐4‐{[(1,2,3‐triazol‐4‐yl)methoxy]phenyl}pyrano[2,3‐c]pyrazole‐5‐carbonitrile derivatives were synthesized through a one‐pot five‐component condensation reaction.     

Synthesis and electropolymerization studies of non-aggregated (4-{3-[3-(dimethylamino,diethylamino)phenoxy]propoxy}phenyl)propanoxy substituted silicon naphthalocyanines

In this study, 3-(4-{3-[3-(dimethylamino)phenoxy]propoxy}phenyl)propan-1-ol, 3-(4-{3-[3-(diethylamino)phenoxy]propoxy}phenyl)propan-1-ol and axially disubstituted silicon naphthalocyanines (SiNc) bearing electropolymerizable bis-[(4-{3-[3-(dimethylamino)phenoxy]propoxy}phenyl)propanoxy] and bis-[(4-{3-[3-(diethylamino)phenoxy]propoxy}phenyl)propanoxy] units were synthesized for the first time. Aggregation behavior of SiNcs was examined in different solvents and concentrations in DMSO. In all solvents and concentrations, SiNcs were non-aggregated. Also, electrochemical studies of SiNcs were investigated by cyclic and square wave voltammetry. While SiNcs gave only naphthalocyanine-based reduction process during the cathodic potential scans, they were electropolymerized on the working electrode during the anodic potential scan because of the oxidative electropolymerization of (4-{3-[3-(dimethylamino)phenoxy]propoxy}phenyl)propanoxy and (4-{3-[3-(diethylamino)phenoxy]propoxy}phenyl)propanoxy groups on the substituents of the complexes.     

A structural study of 4‐aminoantipyrine and six of its Schiff base derivatives

Six derivatives of 4‐amino‐1,5‐dimethyl‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐3‐one (4‐aminoantipyrine), C₁₁H₁₃N₃O, (I), have been synthesized and structurally characterized to investigate the changes in the observed hydrogen‐bonding motifs compared to the original 4‐aminoantipyrine. The derivatives were synthesized from the reactions of 4‐aminoantipyrine with various aldehyde‐, ketone‐ and ester‐containing molecules, producing (Z)‐methyl 3‐[(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)amino]but‐2‐enoate, C₁₆H₁₉N₃O₃, (II), (Z)‐ethyl 3‐[(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)amino]but‐2‐enoate, C₁₇H₂₁N₃O₃, (III), ethyl 2‐[(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)amino]cyclohex‐1‐enecarboxylate, C₂₀H₂₅N₃O₃, (IV), (Z)‐ethyl 3‐[(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)amino]‐3‐phenylacrylate, C₂₂H₂₃N₃O₃, (V), 2‐cyano‐N‐(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)acetamide, C₁₄H₁₄N₄O₂, (VI), and (E)‐methyl 4‐{[(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)amino]methyl}benzoate, C₂₀H₁₉N₃O₃, (VII). The asymmetric units of all these compounds have one molecule on a general position. The hydrogen bonding in (I) forms chains of molecules via intermolecular N—H...O hydrogen bonds around a crystallographic sixfold screw axis. In contrast, the formation of enamines for all derived compounds except (VII) favours the formation of a six‐membered intramolecular N—H...O hydrogen‐bonded ring in (II)–(V) and an intermolecular N—H...O hydrogen bond in (VI), whereas there is an intramolecular C—H...O hydrogen bond in the structure of imine (VII). All the reported compounds, except for (II), feature π–π interactions, while C—H...π interactions are observed in (II), C—H...O interactions are observed in (I), (III), (V) and (VI), and a C—O...π interaction is observed in (II).     

Synthesis,characterization, and electroluminescence of polyfluorene copolymers containing T‐shaped isophorone derivatives

We have successfully synthesized a series of new fluorene‐based copolymers, poly[(9,9‐bis(4‐octyloxy‐phenyl)fluorene‐2,7‐diyl)‐co‐[2(3{2[4(2{4[bis(bromophenyl‐4yl) amino]phenyl}vinyl)‐2,5‐bisoctyloxyphenyl]vinyl}‐5,5‐dimethyl‐cyclohex‐2‐enylidene)malononitrile] (PFTBMs), with varying molar ratios of the low‐energy band gap comonomer, 2(3{2[4(2{4[bis(4‐bromophenyl)amino]phenyl}vinyl)‐2,5‐bisoctyloxyphenyl]vinyl}‐5,5‐dimethyl‐cyclohex‐2‐enylidene)malononitrile (BTBM). To prepare BTBM (which has a T‐shaped structure) from triphenylamine, dialkoxy phenyl, and isophorone, we introduced three individual segments of an isophorone derivative containing two cyanide groups at the carbonyl position, a dialkoxy phenyl group for increased solubility, and a triphenyl amine for effective charge transfer. Furthermore, we introduced vinyl linkages between each segment to increase the length of π‐conjugation. The synthesized polyfluorene copolymers with the BTBM, PFTBMs, were synthesized via palladium‐catalyzed Suzuki coupling reactions. The photoluminescence emission spectra of the synthesized polymers in solution did not show significant energy transfer from PBOPF segments to the BTBM units. Light‐emitting devices based on these polymers were fabricated with an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/polymers/Balq/LiF/Al configuration. Examination of the electroluminescence emission of the synthesized polymers showed that the maximum wavelength shifted continuously toward long wavelengths with as the number of BTBM units in the polymer main chain was increased. In particular, a device using PFTBM 05 exhibited a maximum brightness of 510 cd/m² and a maximum current efficiency of 0.57 cd/A. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 82–90, 2010     

Four oxoindole‐linked α‐alkoxy‐β‐amino acid derivatives

Four structures of oxoindolyl α‐hydroxy‐β‐amino acid derivatives, namely, methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐methoxy‐2‐phenylacetate, C₂₄H₂₈N₂O₆, (I), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐ethoxy‐2‐phenylacetate, C₂₅H₃₀N₂O₆, (II), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐[(4‐methoxybenzyl)oxy]‐2‐phenylacetate, C₃₁H₃₄N₂O₇, (III), and methyl 2‐[(anthracen‐9‐yl)methoxy]‐2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐phenylacetate, C₃₈H₃₆N₂O₆, (IV), have been determined. The diastereoselectivity of the chemical reaction involving α‐diazoesters and isatin imines in the presence of benzyl alcohol is confirmed through the relative configuration of the two stereogenic centres. In esters (I) and (III), the amide group adopts an anti conformation, whereas the conformation is syn in esters (II) and (IV). Nevertheless, the amide group forms intramolecular N—H...O hydrogen bonds with the ester and ether O atoms in all four structures. The ether‐linked substituents are in the extended conformation in all four structures. Ester (II) is dominated by intermolecular N—H...O hydrogen‐bond interactions. In contrast, the remaining three structures are sustained by C—H...O hydrogen‐bond interactions.     

A Simple and Efficient Process for the Synthesis of Novel Heterocycles Containing Benzofuran Moiety Using Thiocarbohydrazide as a Precursor

A simple and efficient process for the synthesis of novel heterocycles starting from thiocarbohydrazide was reported. Reaction of 2‐acetylbenzofuran ( 1 ) and thiocarbohydrazide ( 2 ) in ethanol containing acetic acid produced the corresponding thiocarbohydrazone 3 in 86% yield. Reaction of 3 and isatin ( 4 ) gave N,2‐bis(2‐oxoindolin‐3‐ylidene)hydrazine‐1‐carbothiohydrazine ( 6 ) in 65% yield, rather than the expected product, 3‐[(1‐methyl‐1‐benzofur‐2‐ylmethylidene)amino]‐1‐{[(3Z)‐2‐oxo‐2,3‐dihydro‐1H‐indol‐3‐ylidene]amino}thiourea ( 5 ). Reaction of 2‐((3‐(benzofuran‐2‐yl)‐1‐phenyl‐1H‐pyrazol‐4‐yl)methylene)hydrazine carbothioamide ( 9 ) and chloroacetic acid or hydrazonoyl chloride 11 in basic medium gave (Z)‐2‐((E)‐((3‐(benzofuran‐2‐yl)‐1‐phenyl‐1H‐pyrazol‐4‐yl)methylene)hydrazono)thiazolidin‐4‐one ( 10 ) or 2‐((E)‐2‐((3‐(benzofuran‐2‐yl)‐1‐ phenyl‐1H‐pyrazol‐4‐yl)methylene)hydrazinyl)‐4‐((E)‐(4‐fluorophenyl)diazenyl)‐5‐methylthiazole ( 12 ) in 62% or 74%, respectively.