Colour contribution to children's wayfinding in school environments

The purpose of this study was to explore the contribution of colour to children's wayfinding ability in school environments and to examine the differences between colours in terms of their remembrance and usability in route learning process. The experiment was conducted with three different sample groups for each of three experiment sets differentiated by their colour arrangement. The participants totalled 100 primary school children aged seven and eight years old. The study was conducted in four phases. In the first phase, the participants were tested for familiarity with the experiment site and also for colour vision deficiencies by using Ishihara's tests for colour-blindness. In the second phase, they were escorted on the experiment route by the tester one by one, from one starting point to one end point and were asked to lead the tester to the end point by the same route. In the third phase, they were asked to describe verbally the route. In the final phase, they were asked to remember the specific colours at their correct locations. It was found that colour has a significant effect on children's wayfinding performances in school environments. However, there were no differences between different colours in terms of their remembrances in route finding tasks. In addition, the correct identifications of specific colours and landmarks were dependent on their specific locations. Contrary to the literature, gender differences were not found to be significant in the accuracy of route learning performances.     

Characterisation and differentiation of pigments employed on the façade of “Noto’s Valley” monuments (Sicily)

Most of the “Noto’s Valley” monuments façades, located in different towns of Sicily such as Ragusa Ibla, Modica and Noto, present different colours and in many cases the towns themselves are characterized by evident chromatic variations. The knowledge of colour and in particular the characterization of pigments is of utmost importance in the baroque Sicilian buildings, because the peculiarity of the colour is one of the features that makes the “Noto Valley” monuments a World Cultural Heritage site. The present works aim is to characterise and differentiate the pigments used on the façade of monuments and inside the plasters. In particular, we perform a micro-textural and analytical analysis through scanning electron microscopy (SEM) and a mineralogical investigation through the conjunction of optical microscopy and fourier transform infrared spectroscopy (FT-IR). All the experimental results have allowed us to clearly classify the pigments into earths rich in clay minerals and earth containing gypsum. Furthermore, we also show that the earths rich in clay minerals from Ragusa and Modica areas have local provenance.     

The colour of domestication and the designer chicken

Colour is an important feature of most living organisms. In the wild, colour has great significance affecting the survival and reproductive success of the species. The environmental constraints which lead to the specific colours of birds and animals are very strong and individuals of novel colours tend not to survive. Under domestication, mankind has transformed all the species involved which have thus been freed from environmental pressures to a large extent. Early colour variants were mostly selected for utility reasons or religious practices. In more recent centuries colour varieties have been created purely for ornament and pleasure, fashion playing a surprisingly large part in their development. A bewildering array of colours and patterns can now be found in all our commensal species, especially the Domestic Fowl (Gallus gallus domesticus).     

Complex scaling and residual flavour symmetry in the neutrino mass matrix

We present an instance from nonequilibrium statistical mechanics which combines increase in entropy and finite Poincaré recurrence time. The model we consider is a variation of the well-known Kac’s ring where we consider balls of four colours. As is known, Kac introduced this model where balls arranged between lattice sites, in each time step, move one step clockwise. The colour of the balls change as they cross marked sites. This very simple example rationalize the increase in entropy and recurrence. In our variation, the interesting quantity which counts the difference in the number of balls of different colours is shown to reduce to a set of linear equations if the probability of change of colour is symmetric among a pair of colours. The transfer matrix turns out to be non-Hermitian with real eigenvalues, leading to all colours being equally likely for long times, and a monotonically varying entropy. The new features appearing due to four colours is very instructive.     

Detection of coloured tracks of heavy ion particles using photographic colour film

A photographic colour film, which was exposed to heavy ions, reveals a coloured dye image of the ion tracks. Since the colour film consists of several layers and different colours appear on each layer, three-dimensional information on the tracks in the layers can be obtained by the colour image. Previously, we have reported the method for which the tracks in different colours represented differences of track depth and we also discussed the disadvantages of using commercial colour films. Here we present the procedure for a self-made photographic coating and the development formula which can overcome the disadvantages.     

Cadmium colours: composition and properties

The composition and the properties of cadmium aquarelle colours are discussed. The examined colours were 24 different aquarelle cadmium colours from six different manufacturers. The colours ranged from light, bright yellows to dark, deep-red tones. The aim of this research was to find out if the pigments contain cadmium salts: sulphides and/or selenides. This information will help in choosing watercolours in conservation processes. Today, aquarelle colours not containing cadmium pigments are being sold as cadmium colours; thus their properties might be different from actual cadmium colours. The aim of the research was to verify that the colour samples contained cadmium pigments and to estimate their compositions and ageing properties. Element analyses were performed from colour samples using micro-chemical tests and X-ray fluorescence measurements. Thin-layer chromatography was used for analysing gum Arabic as a possible binding medium in the chosen colour samples. Through ageing tests, the resistance of the colour samples to the exposure to light, heat and humidity was studied. Visible-light spectroscopy was used in determining the hues and hue changes of the aquarelle colour samples. The spectrophotometer used the CIE L^*a^*b^* tone colour measuring system. From the colour measurements the changes in the lightness/darkness, the redness, the yellowness and the saturation of the samples were examined. PACS 32.30.Rj; 32.30.Jc; 33.20.Kf     

Review of RGB photoelasticity

Automatic methods of photoelasticity have had a significant progress with the development of automatic acquisition and image processing methods. This article concerns RGB photoelasticity, which allows the determination of the photoelastic retardation using, usually, a single acquisition of the isochromatic fringes in white light by a colour camera. In particular, the article presents an overview of the main characteristics of RGB photoelasticity that is influence of the quarter-wave plate error, number of acquisitions, type of light source, determination of low and high fringe orders, methods for searching the retardation, scanning procedures, calibration on a material different from that under test, combined use of the RGB and phase shifting methods. A short section on the applications of RGB photoelasticity completes the article.     

Colour symbolism in the folk literature and textile tradition of the Caucasus

Colour associations have been analysed indirectly by a study of oral traditions and legends, using methods developed in structural anthropology. Colours were considered, not in isolation, but mainly in contrasting pairs or in sequences. It was found that a specific colour could have different associations in different conditions, and that generally the associations were more abstract than concrete. In surviving woollen rugs and felts and silk embroideries, colours appear to be linked with availability of dyes rather than symbolism.     

Spectral response data for development of cool coloured tile coverings

Most ancient or traditional buildings in Italy show steep-slope roofs covered by red clay tiles. As the rooms immediately below the roof are often inhabited in historical or densely urbanized centres, the combination of low solar reflectance of tile coverings and low thermal inertia of either wooden roof structures or sub-tile insulation panels makes summer overheating a major problem. The problem can be mitigated by using tiles coated with cool colours, that is colours with the same spectral response of clay tiles in the visible, but highly reflecting in the near infrared range, which includes more than half of solar radiation. Cool colours can yield the same visible aspect of common building surfaces, but higher solar reflectance.Studies aimed at developing cool colour tile coverings for traditional Italian buildings have been started. A few coating solutions with the typical red terracotta colour have been produced and tested in the laboratory, using easily available materials. The spectral response and the solar reflectance have been measured and compared with that of standard tiles.     

Colour image enhancement by white light spatial filtering

Colour enhancement of transparencies with degraded colours is obtained by attenuation of the zero order component of the white light spatial spectrum. The filtering is performed in two ways, directly and sequentially, and the efficiency of the enhancement is estimated through the measurement of the colour difference for several pairs of colours of the object. The method is described in detail and some colour results are presented.     

Using coloured structured light in 3-D surface measurement

The widest used algorithms for 3-D surface measurement using structured fringe patterns are phase stepping and Fourier fringe analysis. The techniques currently employed use mostly monochrome fringe patterns as a tool for phase information measurement and further surface reconstruction. However, the information contained in colour images is much more than that of monochrome, in this case, a new colour technique can be employed to analyse a measured scene with colour fringe patterns.This paper presents a new method for improving the measurement of 3-D shapes by using colour information of the measured scene as an additional parameter. The new method is based on primary colours (red, green and blue) to increase the number of the illuminated fringe patterns, which will remove or significantly reduce the common drawbacks of existing methods. The proposed technique produces a number of coloured structured lighting patterns, which are projected from different angles onto the scene. These patterns are analysed using masking algorithms, a specially adapted multi-colour version of the standard Fourier fringe analysis method and calibration routines. In this way a number of the standard difficulties are overcome.     

Investigation of Chinese skin colour and appearance for skin colour reproduction

A Chinese skin colour database is established based on measurements taken from nine bodies areas of 202 Chinese individuals to move towards accurate skin colour reproduction. The colour appearance of each skin point is predicted, and a comprehensive colour gamut for Chinese skin is determined. A consistent colour shift between facial and arm colours is identified, in which facial colour tends to be more reddish, more colourful, and darker than arm colour. Moreover, Chinese females are found to have lighter, paler, and more yellowish skin than Chinese males. Variations in Chinese skin colour are quantified, and body area differences and gender differences are shown to have significant effects on Chinese skin colour.     

Do bees like Van Gogh's Sunflowers?

Flower colours have evolved over 100 million years to address the colour vision of their bee pollinators. In a much more rapid process, cultural (and horticultural) evolution has produced images of flowers that stimulate aesthetic responses in human observers. The colour vision and analysis of visual patterns differ in several respects between humans and bees. Here, a behavioural ecologist and an installation artist present bumblebees with reproductions of paintings highly appreciated in Western society, such as Van Gogh's Sunflowers. We use this unconventional approach in the hope to raise awareness for between-species differences in visual perception, and to provoke thinking about the implications of biology in human aesthetics and the relationship between object representation and its biological connotations.     

Colours from electroactive polymers: Electrochromic, electroluminescent and laser devices based on organic materials

This paper focuses on the most relevant devices currently used in order to achieve electrically stimulated generations of colours from electroactive polymers, either as coloured light emissions from the material or as modifications of its intrinsic colour properties. For this purpose, most relevant materials, fundamental principles of operations, latest developments and current applications of organic-based electrochromic, electroluminescent and lasing devices are reviewed here. The very promising performances resulting from the analysis of state-of-the-art products, and in particular of those which are currently approaching commercial applications, suggest likely roles played by such devices for niche applications in the very near future.     

On a predictive scheme for colour image quantization

In this paper we proposed an improved colour image quantization scheme based on predictive coding. Since the neighbouring colour pixels are quite similar in most colour images, the similarity among the encoded pixels is exploited. In the proposed scheme the encoded distinct neighbouring colours are collected to form a smaller state-palette. If the closest colour in the state-palette is quite similar to the current encoding colour pixel, the index of the closest colour in the state-palette is recorded. Otherwise, the closest colour in original colour palette for the current encoding colour pixel is searched and the corresponding index is recorded. The experimental results show that the proposed method achieves good image qualities while requiring much lower bit rates for colour image compression.     

Phase shifting photoelasticity in white light

The availability of image acquisition systems has led to the development of digital photoelasticity both in monochromatic and white light. In particular white light has been used mainly with the following methods: Spectral Content Analysis, RGB photoelasticity and phase shifting photoelasticity. Phase shifting photoelasticity in the colour domain has been used effectively for the determination of the isoclinic parameter in order to reduce the influence of the isochromatic fringes. The method has been also proposed for the determination of the isochromatic fringe order. This paper concerns the general characteristics of phase shifting photoelasticity in the colour domain. Special attention is drawn towards the influence of spectral content of the light source, the spectral response of the colour camera filters, the dispersion of the birefringence and the error of quarter wave plates.     

Using digital anaglyphy to improve the relief effect of SEM micrographs of bloodstains

Anaglyphy is a stereoscopic technique based on the superimposition of two images of the same view, taken from slightly different angles as well as in two different colours. This superimposition produces a depth effect when viewed through glasses having one red and one green, blue or cyan lens acting as a colour filter. The nearly flat surface of a chip of grey chert was thin-smeared with peripheral human blood. Two months later, the specimen was fixed to a microscope stub as horizontal as possible, coated with gold, and examined via secondary electrons by a scanning electron microscope (SEM). After obtaining SEM micrographs, anaglyphs were digitally generated. The best results were obtained using pairs of SEM micrographs acquired at 10° differing angle and at SEM-stage tilts that were symmetric from the horizontal plane. The relief effect was more accentuated at low magnification. The most ergonomic colour combination for viewing bloodstain anaglyphs was red–cyan. Digital anaglyphy provides a simple and feasible method to improve the relief effect of SEM micrographs of bloodstains. Moreover, as a first consequence of this improvement, the results obtained in this research reveal that the outermost erythrocyte layer of a thin bloodstain – coinciding, in general, with the smear surface – can be much more uneven than that previously suggested by customary SEM micrographs.     

New Measure of Economic Development Based on the Four-Colour Theorem

The location quotient is one of the basic quantitative tools for identifying the regional poles and the turnpikes of economic growth in spatial economy. The disadvantage of this traditional measure is the limited scope of economic information contained in it. The new measure of economic development proposed in the article encompasses a complex spectrum of phenomena in one number, as it takes into account the influence of the public administration sector, as well as top technology in the form of ICT and its practical business models. It also takes into account the digital prosumption and the platforms for participation. The participation platforms in the public administration sector are the websites of municipal public administration offices. A cluster analysis was used to distinguish four quality classes of these websites. These classes were assigned four different colours, which were then used to draw up a map of the selected province. Each municipality is marked with a colour that corresponds to the quality class of the website of the state administration office operating on its territory. The colour system resulting from the four-colour theorem and the corresponding dual graph play the role of a reference system in relation to each empirical colour distribution and another dual graph related to it. The measure of the economic development of a region is the degree of reduction of the dual graph corresponding to the empirical distribution of colours, which identifies the actual growth poles and determines the routes of growth. The presented indicator better and more precisely identifies poles and routes of economic growth than the traditional location quotient.     

Multiscaled polarization effects in <Emphasis Type="Italic">Suneve coronata</Emphasis> (Lepidoptera) and other insects: application to anti-counterfeiting of banknotes

The scales of many Lepidoptera and the elytra of quite a number of Coleoptera possess specialized micro- and nano-structures that produce special polarization effects. They are constituted by concave multilayered cavities. This leads to two different effects: (1) interferential non-polarized coloration by reflection near normal incidence in the middle of the cavities and (2) polarized interferential colouration at lower wavelength after double reflection near the Brewster incidence at the periphery of the cavities. The macroscopic appearance resembles the “pointillist effect” with one of the component polarized while the other one is not. The first one can be extinguished with linear polarizer so that the colour is modified. In most insects, the structure is locally symmetric; hence, no macroscopic effects can be seen. In certain species, this symmetry is partly broken, and a slight effect can be observed. In the wing dorsal surface of the fascinating neotropical butterflies genus Suneve, perpendicular structures of two different kinds in size polarize the reflected light. The larger one is constituted by the convex cover scales whose apex falls perpendicularly on the bases of the following scales, creating long polarized valley (50 μm width) transversally running across the wing. The smaller one is constituted by the ridges of the scales (2 μm apart) that polarize light in the perpendicular direction.Adapted multilayered structures can be deposited onto banknotes to create anti-counterfeiting patterns as a further development of protection and security. Different effects can be produced by the use of such structures. (1) Changes of luminosity: A specific pattern will be constituted by two different areas: one with horizontal concave multilayered structures, and the other one with vertical structures. Under unpolarized light, the reflected spectra of these different areas are identical and no pattern appears. Under polarized light, i.e., through a linear polarizer, one or the other area is partly extinguished, according to the orientation of the polarizer, and the pattern appears. (2) Changes in colours: a compound colour can be produced by the juxtaposition of planed and grooved surfaces. Due to the change of incidence of the incoming light, the colours of these two zones are different, but that produced by the first one is unpolarized while the second one is partly polarized and can be modified with a linear polarizer. PACS 42.25.Ja; 42.25.Hz; 42.66.Ne; 78.40.Me     

基于多项式回归模型的扫描仪色度特征化

为了实现扫描仪精确的色度特征化,详细研究了多种不同项数、不同变换类型多项式回归模型,多项式的项数分别为3,5,9,11,18和20,变换类型包括扫描仪RGB空间到CIEXYZ或CIELAB空间的多种变换。以ANSIIT8.7/2标准色卡为色靶,对同一台扫描仪进行了色度特征化。实验结果表明,多项式项数小于11时,不同类型模型间的精度差异大,且线性化RGB能提高模型精度;项数大于11时,模型间精度差异缩小,而线性化RGB反而会降低模型精度。实验中,多项式项数为20时的RGB到CIEXYZ变换模型特征化精度最好,平均色差和最大色差分别为0.832和2.988 CIELAB色差单位。