Characterisation of electroplated Bi<Subscript>2</Subscript>(Te<Subscript>1−x</Subscript>Se<Subscript>x</Subscript>)<Subscript>3</Subscript> alloys

Composition modulated Bi₂(Te_1−xSe_x)₃ thin films were prepared on stainless steel substrates by cathodic electrodeposition. The composition was dependent on the deposition conditions. It was possible to obtain, in the same electrolyte, films with either an excess or a deficiency of bismuth in relation to stoichiometric Bi₂(Te_0.9Se_0.1)₃ by changing the deposition potential or the applied current density. The excess of bismuth was reached at the highest cathodic conditions. The variation of the crystallographic axis and the morphology with a granular structure were correlated with the presence of the Bi enrichment in the ternary. The crystallographic texture of bismuth telluride films was studied according to the electrodeposition conditions. The films presented a fibre texture, and a main orientation {11.0} was observed. Electrical and thermoelectric properties of a Bi_1.98Te_2.67Se_0.39 film were measured and showed an n-type behaviour.     

Thermal analysis of the (Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1−x</Subscript>(Y<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>x</Subscript> pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new ecological inorganic pigments. Chemical compounds of the (Bi₂O₃)_1−x(Y₂O₃)_x type were synthesized. The host lattice of these pigments is Bi₂O₃ that is doped by Y³⁺ ions. The incorporation of doped ions provides the interesting colours and contributes to a growth of the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. This paper also contains the results of the pigment characterization by X-ray powder diffraction and their colour properties.     

Glass-forming ability and thermal stability of Se<Subscript>100−x</Subscript>(Ge<Subscript>2</Subscript>Sb<Subscript>2</Subscript>Te<Subscript>5</Subscript>)<Subscript>x</Subscript> glassy alloys

Glassy Se_100?x(Ge₂Sb₂Te₅)_x (x?=?5, 10, 15 and 20) bulk alloys were prepared by melt-quenched technique and studied by using differential scanning calorimetry at different heating rates under non-isothermal condition. The detailed thermal analysis shows that the glass transition temperature (T_g) depends on heating rates and x content. In particular, it is found that the glass-forming ability, thermal stability (T_c???T_g) and crystallization activation energy (E_c) increase with increased x content in amorphous Se, whereas glass transition activation energy (E_g) and fragility index (F) decrease with increased x contents. Variation in these parameters can be explained on the basis of network-forming ability of Se and bonding arrangement among the constituent atoms of alloys.     

Oxygen ionic and electronic transport in Gd<Subscript>2−x</Subscript>Ca<Subscript>x</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript><Subscript>−δ</Subscript> pyrochlores

Oxygen ion transference numbers for Gd_2−xCa_xTi₂O_{7 −δ} (x=0.10–0.14) pyrochlore ceramics were determined at 973–1223 K by the modified e.m.f. and faradaic efficiency techniques, taking into account electrode polarization, and from the results on oxygen permeation. The ion transference numbers vary in the range 0.95–0.98 in air, increasing when the temperature or oxygen partial pressure decreases. The activation energies for the ionic and p-type electronic transport in air are 74–77 and 87–91 kJ/mol, respectively. The p-type conductivity and oxygen permeability of Gd₂Ti₂O₇-based pyrochlores can be adequately described by relationships common for other solid electrolytes. At temperatures below 1273 K under a gradient of 10%H₂+90%N₂/air, average ion transference numbers for doped gadolinium titanate are not less than 0.97. Thermal expansion coefficients for Gd_2−xCa_xTi₂O_{7 −δ} ceramics, calculated from dilatometric data in air, are in the range (10.4–10.6)×10⁻⁶ K⁻¹ at 400–1300 K.     

Transport and thermal characteristics of Cs<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Rb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>H<Subscript>2</Subscript>PO<Subscript>4</Subscript>

The transport and thermal properties of Cs_{1 − x} Rb _x H₂PO₄ in a wide range of compositions were studied. The binary salts Cs_{1 − x} Rb _x H₂PO₄ (x = 0–0.9) contain solid solutions with a structure of CsH₂PO₄. The binary salts were synthesized by mechanically mixing the starting components and growing crystals by isothermal evaporation from aqueous solutions. The properties of Cs_{1 − x} Rb _x H₂PO₄ salts obtained by different procedures were found to differ considerably. At higher rubidium contents in compounds obtained by mechanical mixing, the superionic transition temperature rose insignificantly, the high-temperature phase conductivity decreased twofold, the low-temperature conductivity increased within the limits of the order of magnitude, and the system of hydrogen bonds was slightly weakened. In Cs_{1 − x} Rb _x H₂PO₄ crystals grown from solutions, the temperature of the superionic transition decreased along with its slowing down, and the low-temperature conductivity increased by more than three orders of magnitude because of the higher contents of residual acid aqueous centers in the structure of the salt. These systems are characterized by increased thermal stability.     

Electrotransport Properties of Ceramics Based on Bi<Subscript>4</Subscript>V<Subscript>2 − <Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript>x</Subscript>O<Subscript>11 − <Emphasis Type="Italic">x</Emphasis></Subscript>

Conditions for the formation of single-phase compounds in the synthesis of solid solutions Bi₄V_{2 − x} Fe_xO_{11 − x} are studied. The sequence of phase transitions is determined. Parameters of unit cells of solid solutions are determined. The net conductance as a function of temperature and composition is studied.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 607–609.Original Russian Text Copyright © 2005 by Emel’yanova, Buyanova, Zhukovskii.     

Synthesis of Y<Subscript>3−x</Subscript>Lu<Subscript>x</Subscript>Al<Subscript>3</Subscript>MgSiO<Subscript>12</Subscript> garnet powders by sol–gel method

Y_3−xLu_xAl₃MgSiO₁₂ (x = 0–3) garnet powders were synthesized by an aqueous sol–gel method based on metal chelates with 1,2-ethanediol in aqueous media. Target samples were characterized by powder X-ray diffraction (XRD), scanning electron microscopy and reflection spectra. XRD analysis revealed that sintering of polycrystalline Y_3−xLu_xAl₃MgSiO₁₂ powders at 1,600 °C results in single-phase garnet materials.     

Study of dielectric characteristics of graded Ba<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>Zr<Subscript>0.05</Subscript>Ti<Subscript>0.95</Subscript>O<Subscript>3</Subscript> thin films grown by a sol-gel process

The compositionally graded Ba_1−xCa_xZr_0.05Ti_0.95O₃ (x = 0, 0.05, 0.10) (BCZT) thin films with compositional gradient from BaZr_0.05Ti_0.95O₃ to Ba_0.90Ca_0.10Zr_0.05Ti_0.95O₃ were deposited on Pt/Ti/SiO₂/Si substrates by sol-gel processing. The crystal structure of the thin films was determined by X-ray diffraction. Field emission scanning electron microscopy (FESEM) was used to examine crystallite size and morphology of compositionally graded thin films. The dielectric properties of compositionally graded thin films were characterized by measuring the dielectric constant and dielectric loss as a function of temperature, applied electric field and frequency. As a result, compositionally graded thin films with weak temperature dependence were realized. Dielectric constant peaks, common to a ferroelectric transition, were not observed in the temperature range from 298 to 413 K. The compositionally graded BCZT thin films with weak temperature dependence of tunability could be attractive materials for frequency and phase agile tunable microwave components such as tunable filters, tunable oscillators, and phase shifters for application in phased array antennas.     

Sol-Gel Synthesis and Properties of Y<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>Ba<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3</Subscript> Nanocrystals

The sol-gel method was used to prepare Y_1–xBa_xFeO₃ (x = 0, 0.05, 0.1, 0.15, 0.2) nanocrystals. The influence of the dopant content on the particle size and magnetic properties of yttrium ferrite was examined.     

Potassium-conducting solid electrolytes in K<Subscript>1 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>GaO<Subscript>2</Subscript> system

New solid electrolytes with a high conductivity by K⁺ ions in the K_{1 − 2x} Sr _x GaO₂ system are synthesized and studied. It is found that the introduction of Sr²⁺ ions into potassium monogallate leads to the formation of solid solutions with KGaO₂ structure in a wide range of additive concentration. These solid solutions exhibit a high conductivity; the conductivity increases monotonically with increasing concentration of strontium within the single-phase range. The electrical characteristics are related to the electrolyte structure. The results are compared with the earlier data for the gallate solid electrolytes with the additives of four-charged cations and the systems based on potassium monoferrite and monoaluminate.     

Chemical stability of Ba(Ce<Subscript>1−x</Subscript>Ti<Subscript>x</Subscript>)<Subscript>1−y</Subscript>Y<Subscript>y</Subscript>O<Subscript>3</Subscript> proton-conducting solid electrolytes

The purpose of this work was to investigate the influence of titanium and yttrium dopants on chemical stability of selected Ba(Ce_1−xTi_x)_1−yY_yO₃ compounds. The presented results are the part of wider research concerning the crystallographic structure, microstructure, electrical and transport properties of these groups of materials. Samples of Ba(Ce_1−xTi_x)_1−yY_yO₃ with x=0.05, 0.07, 0.10, 0.15, 0.20, 0.30 and y=0.05, 0.10, 0.20 (for x=0.05) were prepared by solid-state reaction method. Initially, differential thermal analysis (DTA) and thermogravimetry (TG) were used for optimization of preparation conditions. Subsequently, DTA-TG-MS (mass spectrometry) techniques were applied for evaluation of the stability of prepared materials in the presence of CO₂. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) results were used to determine the phase composition, structure and microstructure of materials and to assist the interpretation of DTA-TG-MS results. The strong influence of Ti and Y dopants contents (x and y) on the properties was found. The introduction of Ti dopant led to the improvement of chemical stability against CO₂. The lower Ti concentration the better resistance against CO₂ corrosion was observed. Doping by Y had the opposite effect; the decrease of chemical stability was determined. In this case the higher Y dopant concentration the better resistance was observed. The attempt to correlate the influence of dopant on structure and chemical stability was also presented.     

High-temperature ion transport in La<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3−δ</Subscript>

The conductivity of the entire solid solution La_1–xSr_xFeO_3–, where x=0.2, 0.4, 0.5, 0.7 and 0.9, in the oxygen partial pressure range 10^–19 to 0.5 atm and temperatures between 750 and 950 °C is reported. The analysis of the isothermal pressure dependences of the conductivity reveal that the lanthanum-strontium ferrites can be characterized as mixed ion-electron conductors in the low-oxygen pressure/high-oxygen deficiency limit. The partial contribution to conductivity from oxygen ions increases with strontium content and attains a maximal value at x=0.5. Further increase in doping results in the development of oxygen vacancy ordering phenomena and deterioration of the conducting properties.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

<Superscript>51</Superscript>V NMR in Mn<Subscript>2−2<Emphasis Type="Italic">x</Emphasis></Subscript>Ni<Subscript>2<Emphasis Type="Italic">x</Emphasis></Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> solid solutions

⁵¹V NMR, DTA, and thermogravimetric analysis are used to study the thermal behavior of a manganesenickel pyrovanadate complex Mn_2?2x Ni_2x V₂O₇. It is shown that the nature of ⁵¹V hyperfine interactions in manganese pyrovanadate and solid solutions based on its polymorphic modifications is specified by the structurally activated oxygen exchange with the gaseous phase.     

Oxygen Nonstoichiometry and Transport Properties of Mixed-Conducting Ce<Subscript>0.6–<Emphasis Type="Italic">x</Emphasis></Subscript>La<Subscript>0.4</Subscript>Pr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2–δ</Subscript>

The oxygen nonstoichiometry and electrical conductivity of fluorite-type solid solutions Ce_0.6?xLa_0.4Pr _x O_2–δ (x = 0.1–0.2) were studied in the oxygen partial pressure range 10^–19–0.35 atm at 1023–1223 K. It was confirmed that the Pr^4+/3+ and Ce^4+/3+ redox pairs, which determine the concentration of p- and n-type electron charge carriers, play the dominant roles under oxidizing and reducing conditions, respectively. The conductivity vs. charge carrier concentration dependencies in these conditions are almost linear. Increasing praseodymium content leads to a substantially higher hole conductivity and an expanded range of the oxygen nonstoichiometry variations at high oxygen partial pressures. Under reducing conditions when praseodymium cations become trivalent opposite trends are observed on doping.     

Ionic conduction of Li<Subscript>8 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Mg<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>ZrO<Subscript>6</Subscript> solid solutions

A boundary of existence of solid solutions in the Li_8−2x Mg _x ZrO₆ system is found to be 7 mol % MgO. The transport properties of Li_{8 − 2x} Mg _x ZrO₆ solid solutions (the electronic component of total conductivity, the temperature and concentration dependences of conductivity and activation energy) are studied. It is supposed that, for Li₈ZrO₆ phase and solid solution based on it, an abrupt change of conductivity in the temperature range from 663 to 713 K is caused by the transition of electrolyte into the superionic state.     

Thermal analysis of the Ce<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Tb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> pigments

Compounds based on CeO₂ were synthesized as high-temperature environment-friendly inorganic pigments with interesting hues. The pigments have been synthesized by using the solid state reaction in the temperature range from 1,300 to 1,600 °C. The host lattice of these pigments is CeO₂ that is doped by terbium ions. The incorporation of doped ions provides interesting orange colours after application into ceramic glaze. The goal was to develop conditions for the synthesis of these compounds and to determine the influence of calcination temperature on their colouring effects. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. The pigments were also evaluated from the standpoint of their structure and particle sizes.     

Potassium–conducting K<Subscript>1 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Pb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>GaO<Subscript>2</Subscript> solid electrolytes

Solid electrolytes with potassium-cation conductivity in the K_{1 − 2x} Pb _x GaO₂ system were synthesized and studied. It was found that solid solutions based on potassium monogallate are formed in a wide range of compositions. They contain vacancies in the potassium sublattice that provide for high conductivity of electrolytes. The relationship is considered between electric characteristics of solid electrolytes and the composition and structure of solid solutions. The results are compared to the earlier obtained data for similar solid electrolytes based on potassium monoaluminate and monoferrite.     

Hydrothermal synthesis of Zn<Subscript>2</Subscript>Sn<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ti<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> as anode material for lithium-ion batteries

A novel electrode material, Zn₂Sn_{1 − x} Ti _x O₄ (x = 0 and 0.1), which is superior in its electrochemical characteristics to the reverse spinel Zn₂SnO₄, is synthesized by hydrothermal method. The admixture of TiO₂ levels out the volume expanding caused by the Li-Sn and Li-Zn alloy formation thus improving the material’s cyclability.     

XRF and SIMS/SNMS analyses of Ba<Subscript>x</Subscript>Sr<Subscript>1−x</Subscript>TiO<Subscript>3</Subscript> dielectrics

The development of analytical tools and procedures for process control is a prerequisite for the integration of high permittivity and/or ferroelectric materials in CMOS devices. The thickness and composition of perovskite oxide films were determined by wavelength dispersive X-ray fluorescence analysis (XRF) with special emphasis on the ratio of the group-II elements to the Ti content, and a precision of 0.5% was achieved for a typical film thickness of 20-30 nm. Secondary ion mass spectrometry (SIMS) and sputtered neutrals mass spectrometry (SNMS) was used for depth profiling to determine film homogeneity and elemental interdiffusion at hetero-interfaces. Examples are given for Ba(x)Sr(1-x)TiO(3) and SrTiO(x) thin films which were grown in a prototype MOCVD production tool. No interdiffusion was observed for films grown at 600 degrees C on Pt electrodes in contrast to films grown directly on Si.