脉冲步进调制高压电源远程通讯与反馈控制系统研究

为了满足 HL-2A 装置二级加热系统的高压电源系统的要求,开发了脉冲步进调制(PSM)高压脉冲电 源控制系统。PSM 电源控制系统采用数字信号处理器(DSP)和现场可编程门阵列器件(FPGA)组合控制方式,总计 输出 112 路脉冲。DSP 芯片实现计算、反馈、远程通信等功能,FPGA 主要负责与 DSP 的数据传输及 112 路脉冲 输出的时序控制功能。利用控制器局域网络(CAN)总线实现上位机与 DSP 之间的远程通信功能,上位机采用 LABVIEW 软件实现相关参数的设定与远程通讯。测试结果表明,该控制系统能够实现远程通讯功能,具备快速 的反馈控制功能,满足实验要求。     

Fabrication and characterization of poly(methyl methacrylate) photopolymer doped with 9,10-phenanthrenequinone (PQ) based derivatives for volume holographic data storage

We present our studies on the photopolymer of poly(methyl methacrylate) (PMMA) doped with 9,10-phenanthrenequinone based derivatives for volume holographic storage. By introducing different functional groups on the side-chain of 9,10-phenanthrenequinone molecule, the holographic characteristics of the material can be modified. The photoreaction involved with the holographic recording in the samples was investigated by measuring UV-Vis absorption spectrum and mass spectrum. The experimental results show that the similar behaviors were exhibited in these photopolymers. It is found that phase hologram recording in our PQ derivatives doped PMMA photopolymer involves a structure change of the quinone based molecule, which induces a strong change of the refractive index. Experimental characterizations on holographic data storage, including material sensitivity, dynamic range (M#) and bit-error-rate have been performed. We found that, by selecting appropriate functional groups, an improvement in sensitivity and M# for holographic data storage can be achieved.     

体全息存储中二维交错编码技术的研究及实现

为了克服和纠正体全息存储系统中大量的随机错误和突发错误,数据在按"页面"为单位存入系统时,通常采用纠错编码、交错和调制相结合的编码方式来进行信息组页.文中提出了一种二维交错技术用于克服数据"页面"存在的突发错误,以提高纠错编码的纠错能力,并通过FPGA实现了块交错RS(255,223)编码码字在数据"页面"中的均匀分布.     

莫尔条纹分析在数字全息存储器中的应用

针对像素不匹配的数字全息存储器中出现的莫尔条纹现象,提出了利用莫尔条纹进行全息存储光路精确调整来实现像素匹配的方法.通过对CCD像面图像中莫尔条纹的周期和角度进行分析,得到光学系统需要的精确调整参数.实验中,实现了空间光调制器和光电耦合器阵列512×512像素的1:1像素匹配,该方法能提高读取速度并降低误码率.     

Enhanced angular selectivity in volume holograms with speckle reference waves

A speckle-multiplexing scheme with enhanced angular selectivity for holographic storage is proposed. Angular selectivity in the proposed holographic storage system is theoretically and experimentally investigated. We find the effect of speckle reference wave on angular selectivity strongly depends on the techniques to perform multiplexing for holographic storage. Angular selectivity of a holographic storage system can be effectively enhanced as long as angular deviation of reading wave induces a lateral displacement of the speckle pattern on the hologram plane. When angular deviation of reading wave only induces a speckle wavefront tilt on the hologram plane, the speckle wave is not helpful to enhance the angular selectivity and the angular selectivity becomes to depend on material thickness (Bragg condition) only.     

Dynamic analysis of holographic gratings in amulti-wavelength visible light sensitive photopolymer

A dynamic theoretical model of photochemistry and hologram formation in holographic photopolymer is established, and the dynamic development process of holographic gratings in the photopolymer is discussed with the model. A novel multi-wavelength visible light sensitive photopolymer for holographic storage is prepared. The influence of exposure wavelength on holographic storage characteristics is analysed. By fitting the experimental data of transmittance and diffraction efficiency to a function of time with different exposure intensities and wavelengths, the variations of dynamic parameters of photochemistry and photopolymerization diffusion are presented.     

Holographic storage of three-dimensional image and data using photopolymer and polymer dispersed liquid crystal films

We present holographic storage of three-dimensional(3D) images and data in a photopolymer film without any applied electric field.Its absorption and diffraction efficiency are measured,and reflective analog hologram of real object and image of digital information are recorded in the films.The photopolymer is compared with polymer dispersed liquid crystals as holographic materials.Besides holographic diffraction efficiency of the former is little lower than that of the latter,this work demonstrates that the photopolymer is more suitable for analog hologram and big data permanent storage because of its high definition and no need of high voltage electric field.Therefore,our study proposes a potential holographic storage material to apply in large size static 3D holographic displays,including analog hologram displays,digital hologram prints,and holographic disks.     

基于DSP+FPGA的实时信号采集系统设计与实现

为了提高对实时信号采集的准确性和无偏性,提出一种基于DSP+FPGA的实时信号采集系统设计方案。系统采用4个换能器基阵并联组成信号采集阵列单元,对采集的原始信号通过模拟信号预处理机进行放大滤波处理,采用TMS32010DSP芯片作为信号处理器核心芯片实现实时信号采集和处理,包括信号频谱分析和目标信息模拟,由DSP控制D/A转换器进行数/模转换,通过FPGA实现数据存储,在PC机上实时显示采样数据和DSP处理结果。通过仿真实验进行性能测试,结果表明,该信号采集系统能有效实现实时信号采集和处理,抗干扰能力较强。     

Multilevel phase and amplitude modulation method for holographic memories with programmable phase modulator

The utilization of spatial quadrature amplitude modulation (SQAM) signals with amplitude and phase modulation is a simple method used to improve storage capacity in a holographic data storage system. We propose a multilevel phase and amplitude modulation method for holographic memories with a programmable phase modulator (PPM). In this method, holographic page data is recorded by a two-step exposure process for different phase-modulated data. There is no need to adjust the positions of spatial light modulators (SLM) with high accuracy because we use only one spatial modulator. We estimate the quality of 16 SQAM signals produced by our technique.     

莫尔条纹分析在数字全息存储器中的应用

针对像素不匹配的数字全息存储器中出现的莫尔条纹现象,提出了利用莫尔条纹进行全息存储光路精确调整来实现像素匹配的方法.通过对CCD像面图像中莫尔条纹的周期和角度进行分析,得到光学系统需要的精确调整参数.实验中, 实现了空间光调制器和光电耦合器阵列512×512像素的1∶1像素匹配,该方法能提高读取速度并降低误码率.     

Holographic recording in LiNbO3 using various polarized lights

Holographic recordings in a LiNbO₃ crystal using ordinary and extraordinary light in transmission-type geometry were performed. The system parameters of storage capacity (M/#), sensitivity, and signal-to-noise ratio were measured. Although extraordinary light will induce stronger fanning light (nonlinear enhanced scattered light) in LiNbO₃, our experimental results indicate that the system using extraordinary light is superior to that using ordinary light. Our demonstrations and results can help to optimize the holographic recording in some applications of volume holographic optical element (VHOE), such as wavelength division multiplexing (WDM) filters in optical communication.     

Decryption of a random-phase multiplexing recording system

In practice, decrypting a random-phase encrypted volume holographic data storage system is impossible unless the original random-phase plate for the encryption is available. However, this study demonstrates that under certain conditions, ways are available that can decrypt an encrypted photorefractive LiNbO₃ crystal holographic storage system. In addition to presenting experimental results that show the efficacy of this decryption approach, problems and difficulties in the experiments are discussed.     

体全息存储技术

体全息存储技术以其存储密度和数据读出率高及相关内容寻址等特点而具有广阔的应用前景。但体全息存储技术要同其它已经成熟的技术竞争 ,以在存储市场上占有一席之地 ,就必须注重发挥自己的优势。另外体全息存储技术要实现商品化 ,还有两个重要的问题需要解决。一是以较低的价格实现激光、空间光调制器和探测器阵列的对准。其次是要寻找合适的存储材料。对体全息存储来说寻找合适的存储材料仍是一个尚待解决的问题 ,至今还没有一种材料具有性能、容量和价格的综合优势     

Holographic read-only memory

We describe the three-dimensional holographic optical disc system for application as read-only memory. Several systems design issues are discussed including imaging optics, storage density, readout rate, and the alignment servo system. We demonstrate 40 bits/m² surface density and pixel-matched holographic data readout from a 12 cm disc spinning at 600 RPM.     

基于LiNbO3晶体的透射式共光轴体全息存储技术

共光轴体全息存储是体全息存储技术实用化的一个发展方向。为了选择合适的参数以搭建基于晶体的透射式共光轴体全息存储系统,对该系统的存储容量、串扰特性和晶体在共光轴存储结构中的存储特性等进行了研究。从理论上分析了共光轴体全息存储系统的存储密度、物镜的参数、空间光调制器的像素尺寸、有效像素数目和移位复用间隔等之间的关系,给出了点扩展函数表达式的物理解释,并根据点扩展函数分析了系统的串扰特性,优化了存储偏振光方向以使晶体表现出最大的动态范围。根据分析优化结果搭建了基于LiNbO3晶体的透射式共光轴体全息存储实验系统,实现了高分辨图像的记录与再现。与传统的双轴系统相比,所搭建的共光轴系统具有光路结构紧凑的特点。     

Recording media that exhibit high dynamic range for digital holographic data storage

A general strategy for fabricating thick, optically flat photopolymer recording media with high dynamic range (M/#) that exhibit low levels of recording-induced Bragg detuning for holographic data storage is presented. In particular, media with M/# values as high as 42 in 1-mm-thick formats are obtained. We believe that these results are the first demonstration of a holographic storage medium with a dynamic range of this magnitude. In addition, we report the holographic recording and recovery of high-capacity (480-kbit) digital data pages in these media, further illustrating their data-storage capabilities.     

双波长敏感的非水溶性光致聚合物存储特性研究

研究了一种新型的对红光和蓝光敏感的非水溶性光致聚合物材料的全息存储特性。该聚合材料由复合单体、复合光敏剂、复合引发剂、链转移剂及成膜物等成分组成,它具有防潮、后处理简单、分辨率高及耐高温等特点,对红、蓝光2种衍射效率均不低于75%,灵敏度为(45～65)mJ/cm2。对该材料先后进行了双波长复用存储实验和角度复用存储实验,当用红光或蓝光再现时再现图像清晰可见,相邻2副图像之间无明显干扰,说明该材料具有良好的存储性能,适合作高密度数字全息存储的记录材料,可用作光通信中的波分复用器及其他光学元件。     

Ultra-narrow interval angular control signal for holographic data storage system

Optical Review - A precise and fast method for controlling the reference-beam angle of an angular-multiplexed holographic data storage system (HDSS)—to achieve larger capacity and faster...     

Holographic digital data storage using phase-modulated pixels

We propose and demonstrate the use of phase images for holographic data storage. Use of phase images as input leads to uniform diffraction efficiency of multiplexed data pages. Use of binary phase-based data pages with 0 and π phase changes produces uniform spectral distribution at the Fourier plane. This in turn facilitates better recording of higher spatial frequencies. We experimentally demonstrate a phase-based holographic data storage system using shift multiplexing in a Fe:LiNbO₃ crystal, and use it for associative retrieval. Preliminary studies indicate high discrimination capabilities of phase-based holographic data storage system over the amplitude-based system in a content-addressable memory.     

Transmission type twisted nematic liquid crystal display for three gray-level phase-modulated holographic data storage systems

Gray-level data pages enhance the storage capacity of holographic data storage systems. A balanced three gray-scale data page in phase mode produces a homogenized Fourier spectrum which is regarded to be necessary for suitable exploitation of the holographic recording medium. A commercially available transmission type twisted nematic liquid crystal display has been characterized for use as a phase spatial light modulator with phase modulation in the range 0–3π/2 at 532 nm wavelength, such that it may be used for holographic data storage with binary as well as three gray-level phase-modulated data pages. Experimental results of the phase and amplitude modulation characteristics of the SLM, Fourier plane homogeneity, and recording of phase-modulated binary, three gray-level data pages and their reconstruction with a real-time holographic interferometric method are presented.