Kinetic-spectrophotometric determination of molybdenum (VI) and tungsten (VI) in mixtures

A simple kinetic-spectrophotometric method is described for the determination of molybdenum(VI) and tungsten(VI) in mixtures, without prior separation. The method is based on the catalytic effect of molybdenum(VI) and tungsten(VI) on the oxidation of 2,4-diaminophenol dihydrochloride (DAP) by hydrogen peroxide in acidic medium. The reaction was followed spectrophotometrically by measuring the rate of change in absorbance with time at 500 nm. A partial inhibition in the catalytic activity of each catalyst, when the other one is present, at all ratios of Mo(VI) W(VI) mixtures studied was observed. On the other hand, the catalytic activity of tungsten(VI) dropped to zero whilst that of molybdenum(VI) decreased slightly, in the presence of citrate ions. Two sets of experiments were carried out, the first in the absence and the other in the presence of citrate, and the resolution of Mo(VI)/W(VI) mixtures was achieved by solving two simultaneous equations. Various molar ratios of Mo(VI) W(VI), at the 10^–6 M level, from 0.2 1 to 5 1 can be determined with satisfactory precision and accuracy. The selectivity of the method was investigated and the method was applied successfully to the determination of molybdenum and tungsten in each other's presence in steel.     

Speciation, liquid-liquid extraction, sequential separation, preconcentration, transport and ICP-AES determination of Cr(III), Mo(VI) and W(VI) with calix-crown hydroxamic acid in high purity grade materials and environmental samples

A new functionalized calix[6]crown hydroxamic acid is reported for the speciation, liquid-liquid extraction, sequential separation and trace determination of Cr(III), Mo(VI) and W(VI). Chromium(III), molybdenum(VI) and tungsten(VI) are extracted at pH 4.5, 1.5 M HCl and 6.0 M HCl, respectively with calixcrown hydroxamic acid (37,38,39,40,41,42-hexahydroxy7,25,31-calix[6]crown hydroxamic acid) in chloroform in presence of large number of cations and anions. The extraction mechanism is investigated. The various extraction parameters, appropriate pH/M HCl, choice of solvent, effect of the reagent concentration, temperature and distribution constant have been studied. The speciation, preconcentration and kinetic of transport has been investigated. The maximum transport is observed 35, 45 and 30 min for chromium(III), molybdenum(VI) and tungsten(IV), respectively. For trace determination the extracts were directly inserted into the plasma for inductively coupled plasma atomic emission spectrometry, ICP-AES, measurements of chromium, molybdenum and tungsten which increase the sensitivity by 30-fold, with detection limits of 3 ng ml⁻¹. The method is applied for the determination of chromium, molybdenum and tungsten in high purity grade ores, biological and environmental samples. The chromium was recovered from the effluent of electroplating industries.     

Kinetic-Spectrophotometric Determination of Molybdenum(VI) Based on Its Catalytic Effect on the Thionine-Hydrazine Reaction

Abstract

A kinetic method for the determination of trace amounts of Mo(VI) (0.05-4 μg ml^?1) based on its catalytic effect on the reduction of thionine by hydrazine monochloride in strongly acidic media is reported. The reaction is monitored spectrophotometrically by measuring the decrease in absorbance of thionine at 605 nm after a fixed time (5 min.). The detection limit of the method is 23 ng ml^?1 and the relative standard deviation (RSD) for 0.05 μg ml^?1 of Mo(VI) is 1.2% (n=7). The method is almost free from interferences, especially from large amounts of tungsten. The procedure was successfully applied to the determination of trace amounts of molybdenum in steel.     

Determination and comparison of stability constants of tungsten(VI) and molybdenum(VI) with nitrilotriacetic acid and glutamic acid at different ionic strengths

The formation constants of species formed in the systems H⁺?+?W(VI)?+?nitrilotriacetic acid (NTA) and H⁺?+?NTA have been determined in aqueous solution for pH?=?4–9 at 25°C and different ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 NaClO₄, using potentiometric and spectrophotometric techniques. It was shown that tungsten(VI) forms a mononuclear 1?:?1 complex with NTA of the type WO₃L^3? at pH?=?7.5. The composition of the complex was determined by the continuous variations method. The complexation of molybdenum(VI) with glutamic acid was investigated in aqueous solution ranging in pH from 4 to 9, using polarimetric, potentiometric and spectrophotometric techniques. The composition of the complex was determined by the continuous variations method. It was shown that molybdenum(VI) forms a mononuclear 1?:?1 complex with glutamic acid of the type MoO₃L^2? at pH?=?6.0. The dissociation constants of glutamic acid and the stability constants of the complex were determined at 25°C and at ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 sodium perchlorate. In both complex formation reactions the dependence of the dissociation and stability constants on ionic strength is described by a Debye-Huckel type equation. Finally, a comparison has been made between the patterns of ionic strength dependence for the two complexes and the results have been compared with data previously reported.     

Determination of Molybdenum(VI) At Trace Levels by a Catalytic Polarographic Method

Abstract

ARSTRACT

A d.c. polarography method for molybdenum (VI) determination at trace levels has been developed. The reaction is catalytic between molybdenum, salicylaldoxime (SCAD) and bromate in acetic-acetate medium. The obtained peak is proportional to molybdenum (VI) concentrations in the range 1.08.10^?a to 1.37.10^?6 M. The proposed procedure is selective, the most serious interferents being W(VI), Pb(II) and Fe(II). It is applied to molybdenum determination in steel samples after iron extraction by ethyl ether.     

Triphenyltetrazolium chloride as a new analytical reagent for molybdenum(VI): Application to plant analysis

Solvent extraction of molybdenum(VI) ion associate with triphenyltetrazolium chloride (TTC) has been studied. TTC was proposed as reagent for the spectrophotometric determination of micro amounts of molybdenum(VI) at λ_max 250 nm. The optimum conditions for extraction of molybdenum(VI) as an ionassociation complex with TTC has been determined. Beer’s law is obeyed in the range of 0.5–10 μg/mL molybdenum(VI). The molar absorptivity of the ion-pair is 1 × 10⁶ L/mol cm. The sensitivity of the method is 9.6 × 10⁻⁵ μg/cm². The characteristic values for the extraction equilibrium and the equilibrium in the aqueous phase are: distribution constant K _D = 32.64, extraction constant K _ex = 2.19 × 10¹⁰ association constant β = 6.71 × 10⁸. The interferences of different cations, anions on molybdenum(VI) determination were also investigated. A sensitive and selective method for the determination of microquantities of molybdenum(VI) has been developed. The determination was carried out without preliminary separation of molybdenum. A novel procedure of molybdenum(VI) extraction and spectrophotometric determination in different plant samples was examined.     

Azo compounds as reagents for the voltammetric determination of molybdenum(VI)

Linear sweep voltammograms of Lumogallion IREA (pH 2), Magneson IREA (pH 2), 4-(2-pyridylazo)resorcinol (pH 4.8), and 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (pH 4.8) in the presence of molybdenum(VI) exhibit peaks at potentials more negative than the potentials of reduction peaks of the reagents by approximately 0.1 V. In all of the above cases, the heights of these peaks linearly increased with an increase in the concentration of molybdenum(VI) in the range from 5 x 10^-7 to 2.5 x 10^-6 M; thus, these peaks can be used for the determination of molybdenum. The simultaneous proportional decrease in the heights of the cathodic peaks of the reagents can be used for indirect determination of molybdenum(VI). The limits of detection without preliminary accumulation at a dropping mercury electrode with a drop time of 5 s are (1.5-3.9) x 10^-7 M, depending on the nature of the reagent and the technique used for determining the concentration.     

Interaction of Molybdenum(VI) Oxyanions with +2 Metal Cations

The association of molybdenum(VI) oxyanions with metal cations was investigated in solutions of low ionic strength, such as those prevailing in most natural waters. Potentiometric titrations were carried out for the systems containing molybdenum(VI) anions and divalent metal cations (M = Mg, Ca, Sr, Ba, Mn, Fe, Co, Ni, Cu, Zn, Cd, Hg and Pb). This selection includes the major cations and some other cations of high environmental relevance. The interaction of iron(III) with Mo(VI) anions was also studied. At neutral and basic pH values and for those systems where the solubility of the molybdate salt is high enough, ionic species pairs such as [M(MoO₄)] predominate. At acidic pH values, [M(HMoO₄)]⁺ and [M(Mo₇O₂₄)]^4– are formed, the latter species are only relevant for total molybdenum concentrations higher than 1 mmol·L^?1. These results provide the basis for molybdenum speciation in natural aquatic systems, on which the environmental fate, bioavailability and toxicity of the element depend.     

Determination of Cr(VI) in the Presence of Complexing Agents and Humic Substances by Catalytic Stripping Voltammetry

The voltammetric method of Cr(VI) determination in a flow system is proposed. Determinations can be carried out in the simultaneous presence of an excess of Cr(III), complexing agents, humic substances and surfactants. The method is based on the combination of a selective accumulation of the product of Cr(VI) reduction to the metallic state and a very sensitive voltammetric method of chromium determination in the presence of DTPA and nitrates. The calibration graph is linear from 1×10^?9 to 5×10^?8 mol L^?1 for accumulation time of 30 s. The relative standard deviation is 5.2% (n=5) for Cr(VI) concentration 1×10^?8 mol L^?1. The influence of humic and fulvic acids, complexing agents and surfactants on Cr(VI) and the interfering Cr(III) signal is presented. The method was applied to Cr(VI) determination in certified reference material, soil sample, natural water sample and EDTA extracts from soil certified reference material.     

Adsorptive Cathodic Stripping Voltammetric Determination of Uranium(VI) in Presence of N‐Phenylanthranilic Acid

N‐Phenylanthranilic acid was used as a complexing agent for determination of uranium(VI) by adsorptive cathodic stripping voltammetry. Under the optimal experimental conditions of the experimental parameters, the peak current was proportional to the concentration of U(VI) in the range 0.75–30 ng mL^?1 and the detection limit was 0.036 ng mL^?1. The influence of possible interferences was investigated. The method was applied for determination of uranium in waste water from uranium conversion facility and natural water samples. Application of the method for simultaneous determination of U(VI) and Cu(II) showed that these ions could be simultaneously determined in a single scan at relatively wide concentration range.     

The Molybdenum(V) and Tungsten(VI) Oxoazides [MoO(N3)3], [MoO(N3)3⋅2 CH3CN], [(bipy)MoO(N3)3], [MoO(N3)5]2−, [WO(N3)4], and [WO(N3)4⋅CH3CN]

A series of novel molybdenum(V) and tungsten(VI) oxoazides was prepared starting from [MOF₄] (M=Mo, W) and Me₃SiN₃. While [WO(N₃)₄] was formed through fluoride–azide exchange in the reaction of Me₃SiN₃ with WOF₄ in SO₂ solution, the reaction with MoOF₄ resulted in a reduction of Mo^VI to Mo^V and formation of [MoO(N₃)₃]. Carried out in acetonitrile solution, these reactions resulted in the isolation of the corresponding adducts [MoO(N₃)₃?2 CH₃CN] and [WO(N₃)₄?CH₃CN]. Subsequent reactions of [MoO(N₃)₃] with 2,2′‐bipyridine and [PPh₄][N₃] resulted in the formation and isolation of [(bipy)MoO(N₃)₃] and [PPh₄]₂[MoO(N₃)₅], respectively. Most molybdenum(V) and tungsten(VI) oxoazides were fully characterized by their vibrational spectra, impact, friction and thermal sensitivity data and, in the case of [WO(N₃)₄?CH₃CN], [(bipy)MoO(N₃)₃], and [PPh₄]₂[MoO(N₃)₅], by their X‐ray crystal structures.     

Catalytic spectrophotometric determination of molybdenum (VI) with the hydrazine-metanil yellow system

A new catalytic Spectrophotometric method for the determination of trace amounts of molybdenum (VI) has been proposed. The method is based on the catalytic effect of Mo(VI) on the reduction of metanil yellow by hydrazine dihydrochloride. Under experiment condition, the linear range of determination is 20–160 ng/mL for molybdenum and the detection limit is 11.2ng/mL. The method has been used to determine trace molybdenum in bean samples with the recovery of 96.0–99.0%, with relative standard deviations of 1.50–2.53%.     

Tungsten(VI) and mixed tungsten,molybdenum(VI) complexes of tartaric acid

A number of studies of species formed in the tungsten(VI) oxide-R,R-(+)-tartaric acid-water system have been carried out(^1–3). While various species have been proposed, it is generally accepted that three main ones predominate. Two have tungsten: (+)-tartaric acid [(+)-tartH₄] ratios of 11 and the third has the same ratio of 12. This latter species cannot be that proposed by Avaloset al. ⁽³⁾ since both ligands in their structure would have to be present as unidentates.Recently we have shown⁽⁴⁾ that high resolution¹H and¹³C n.m.r. studies were particularly useful in delineating the complexes formed in aqueous solution in the analogous molybdenum(VI) system. Thus, we turned our attention to the corresponding tungsten(VI) complexes, especially in view of the controversy surrounding the nature of the species formed in aqueous solution with (+)-tartH₄. The results of our studies, presented below, indicate that only a few species are formed, and that these are quite analogous, as might be expected, to the previously described molybdenum(VI) species⁽⁴⁾. In addition we have observed the formation of a mixed dimeric species [MoWO⁴{(+)-tart}₂]^4–, whose structure is akin to the mono-metallic complexes, as well as the well-characterized antimony(III) and arsenic(III) dimers of (+)-tartH₄ ⁽⁵⁾.     

Spectrophotometric determination of molybdenum based on charge transfer complexes sensitized by copper(II)

A new high sensitive spectrophotometric determination of trace molybdenum was investigated. The sensitivity of the determination of molybdenum, which based on the color charge transfer complex of molybdotungstophosphate-3,3′,5,5′-tetramethylbenzidine, was greatly enhanced by copper(II) ions in the presence of polyvinyl alcohol. The improved method maintained the features of simplicity, rapidity and selectivity, especially eliminating the interference from tungsten. Under the optimum conditions, Beer's law was obeyed over the range from 2 to 32 ng ml⁻¹ molybdenum with molar absorptivity being 4.92×10⁵ l mol⁻¹ cm⁻¹ at 660 nm. The relative standard deviation was 1.2% under nine determinations for 16 ng ml⁻¹ Mo(VI). The present method had been applied to the determination of trace molybdenum in tungsten ores with satisfactory results.     

Solvent Effects on Complexation of Molybdenum（Ⅵ） with Nitrilotriacetic Acid in Different Aqueous Solutions of Propanol

By using spectrophotometric and potentiometric techniques the formation constants of the species formed in the systems H^＋＋ Mo（Ⅵ）＋nitrilotriacetic acid and H^＋ ＋ nitrilotriacetic acid have been determined in aqueous solutions of propanol at 25 ℃ and constant ionic strength 0.1 molodm^-3 sodium perchlorate. The composition of the complex was determined by the continuous variation method. It was shown that molybdenum（Ⅵ） forms a mononuclear 1 ： 1 complex with nitrilotriacetic acid of the type MoO3L^-3 at -lg[H^＋] =5.8. The formation constants in various media were analyzed in terms of Kamlet and Taft＇s parameters. Linear relationships were observed when lg Ks was plotted versusp. Finally, the results were discussed in terms of the effect of solvent on complexation.     

Speciation of Cr(III) and Cr(VI) using solid phase extraction and determination of total As inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometric (ICP-AES) method was developed for speciation and simultaneous determination of Cr and As, since these two analytes are commonly determined in various water samples in order to assess their toxicity. The objective of this research was to study the speciation of Cr(III), Cr(VI) in the presence of As(III) and/or As(V) using solid phase extraction (SPE) and ICP-AES. For these measurements, four spectral lines were used for each analyte with the purpose of selecting the most appropriate for each element. Finally with the use for first time of a cation-exchange column filled with benzosulfonic acid and elution with HCl, the speciation in solutions which contained [Cr(III)?+?Cr(VI)?+?As(V)] and [Cr(III)?+?Cr(VI)?+?As(III)] was examined. It was demonstrated that the separation of the two chromium species is almost quantitative and the simultaneous determination of chromium species and total arsenic analytes is possible, with very good performance characteristics. The estimated limits of detection for Cr(III), Cr(VI), As(III) and/or As(V) were 0.9?µg?L^?1, 1.1 µg?L^?1, 4.7 µg?L^?1 and 4.5 µg?L^?1 respectively, the calculated relative standard deviations (RSDs) were 3.8%, 4.1%, 5.2% and 5.1% respectively, and finally the accuracy of the methods was estimated using a certified aqueous reference material and found to be 5.6% and 4.8% for Cr(III) and Cr(VI) respectively. The method was applied to the routine analysis of various water samples.     

Polarographic determination of nanomolar concentrations of molybdenum(VI)

Summary Polarographic Determination of Nanomolar Concentrations of Molybdenum (VI) A new differential pulse polarographic method for the determination of Mo(VI) is described. Mo(VI) is first chelated by 7-nitro-8-hydroxychinoline-5-sulfonic acid at pH 1. The complex ion MoO₂L₂ ^2– formed is strongly adsorbed on the surface of a dropping mercury electrode. At a potential difference of 0.95 V the complex ion is reduced to a Mo(V)-complex, which is oxidized very fast by H_aq ⁺ providing the starting complex ion for repeated redox cycles. The net process consists in the catalytic reduction of H_aq ⁺ to 1/2 H₂ in the double layer. H₂ was detected by inductively coupled plasma atomic emission spectrometry. A modified preparation method for the chelating agent and its characterization are also described. The method was used for the determination of Mo(VI) in the surface water of Lake Zürich. An average value of 0.463±0.007 ng/g (4.83±0.07 nM) was calculated from 39 single values. The errors are the confidence intervals of the corresponding means at the 99% confidence level. The standard deviation and the practical detection limit were 0.016 and 0.031 ng/g, respectively, for single determinations on the average.     

Kinetics and mechanism of the reaction between dimethylformamide and chromium(VI)

The kinetics of oxidation of N,N‐dimethylformamide by chromium(VI) has been studied spectrophotometrically in aqueous perchloric acid media at 20°C. The rate showed a first‐order dependence on both [Cr(VI)] and [DMF], and increased markedly with increasing [H⁺]. The order with respect to [HClO₄] was found to lie between 1 and 2. The rate was found to be independent of ionic strength as well as of any inhibition effect of Mn(II). The formation of superoxochromium(III) ion was detected in an aerated solution of chromium(VI), DMF and HClO₄. The proposed mechanism, involving two reaction pathways, leads to the rate law, rate = K_a1 [HCrO₄⁻] [DMF] (k_I K_a2 [H⁺]²+k_II[H⁺]). The first pathway, with rate constant k_I, involves the formation of chromium(V) and a free radical. The second pathway, with rate constant k_II, involves the formation of Cr(IV), CO₂ and dimethylamine. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 409–415, 1999     

Speciation Analysis of Cr(III) and Cr(VI) after Solid Phase Extraction Using Modified Magnetite Nanoparticles

A new solid phase extraction (SPE) method has been developed for the speciation of Cr(III) and Cr(VI). This method is based on the adsorption of Cr(VI) on modified alumina‐coated magnetite nanoparticles (ACMNPs). Total chromium in different samples was determined as Cr(VI) after oxidation of Cr(III) to Cr(VI) using H₂O₂. The chromium concentration has been determined by flame atomic absorption spectrometric (FAAS) technique and amount of Cr(III) was calculated by substracting the concentration of Cr(VI) from total chromium concentration. The effect of parameters such as pH, amount of adsorbent, contact time, sample volume, eluent type, H₂O₂ concentration and cetyltrimethylammonium bromide (CTAB) concentration as modifier on the quantitative recovery of Cr(VI) were investigated. Under the optimal experimental conditions, the preconcentration factor, detection limit, linear range and relative standard deviation (RSD) of Cr(VI) were 140 (for 350 mL of sample solution), 0.083 ng mL^?1, 0.1‐10.0 ng mL^?1 and 4.6% (for 5.0 ng mL^?1, n = 7), respectively. This method avoided the time‐consuming column‐passing process of loading large volume samples in traditional SPE through the rapid isolation of CTAB@ACMNPs with an adscititious magnet. The proposed method was successfully applied to the determination and speciation of chromium in different water and wastewater samples and suitable recoveries were obtained.     

Nitrido-Azido-Komplexe des Molybdän(VI): Synthese und Kristallstruktur von [MoN(N3)2(terpy)]+ [MoN(N3)4]−·MoN(N3)3 (terpy)

Nitrido-Azido-Complexes of Molybdenum(VI). Synthesis and Crystal Structure of [MoN(N₃)₂(terpy)]⁺[MoN(N₃)₄] ^? · MoN(N₃)₃(terpy) (CH₃)₃SiN₃ reacts with Mo(CO)₃(terpy) in CH₃CN yielding red crystals of [MoN(N₃)₂(terpy)]⁺[MoN(N₃)₄] ^?· MoN(N₃)₃(terpy) (space group P1 , a = 1039.3 pm, b = 1384.6 pm, c = 1685.4 pm, α = 112.4°, β = 108.1°, γ = 88.3°, Z = 2, R = 0.035 for 4376 independent reflections). The structure consists of three different mononuclear complexes. In the neutral complex MoN(N₃)₃(terpy) Mo exhibits the coordination number 7 in form of a distorted pentagonal bipyramid, with the terpyridine ligand and two azido groups in the equatorial plane. The axial positions are occupied by the nitrido ligand and another azido group. The triply bonded nitrido nitrogen atom (Mo1? N1 = 165.6 pm) causes a strong trans effect resulting in a long distance of 245.7 pm to N_α of the trans bonded azido group. The cationic complex [MoN(N₃)₂(terpy)]⁺ derives from MoN(N₃)₃-(terpy) by abstraction of the trans bonded azido group. For the molybdenum atom remains the coordination number 6 in form of the rarely found pentagonal pyramid. In the anion [MoN(N₃)₄]^? the molybdenum atom exhibits the coordination number 5 in form of a tetragonal pyramid with the nitrido ligand in the apex. The square basic plane is formed by the N_α atoms of the azido groups.