Synthesis and electrochemical properties of composite films based on poly-3,4-ethylenedioxythiophene with inclusions of silver particles

The electrochemical behavior of PEDOT/Ag composite films obtained by chemical deposition of ultrafine Ag particles into the poly-3,4-ethylenedioxythiophene (PEDOT) matrix was studied. The film morphology was characterized by transmission electron microscopy (TEM). The changes in the mass of the films during the chemical deposition of silver into the polymer structure were evaluated microgravimetrically. The mass of the included metallic silver particles depends on the synthesis time and the initial concentration of silver ions in solution. The cyclic voltammograms (CVs) of PEDOT/Ag films in sodium nitrate solutions and sodium nitrate solutions with additions of chloride ions were studied. The cyclic voltammograms of PEDOT/Ag films in chloride-containing solutions showed the peaks of the oxidation of silver and reduction of the oxidation product, which were absent on the CVs of the starting PEDOT film.     

A new simulation model for electrochemical metal deposition

A new atomistic simulation model for electrochemical systems is presented. It combines microcanonical molecular dynamics for the electrode with stochastic dynamics for the solution, and allows the simulation of electrochemical deposition and dissolution for specific electrode potentials. As first applications the deposition of silver and platinum on Au(1 1 1) have been studied; both flat surfaces and surfaces with islands have been considered. The two systems behave quite differently: Ag on Au(1 1 1) grows layer by layer, while Pt forms a surface alloy on Au(1 1 1), which is followed by three-dimensional growth.     

Androgynous porphyrins. Silver(II) quinoxalinoporphyrins act as both good electron donors and acceptors

The metal-centered and macrocycle-centered electron-transfer oxidations and reductions of silver(II) porphyrins were characterized in nonaqueous media by electrochemistry, UV-vis spectroelectrochemistry, EPR spectroscopy, and DFT calculations. The investigated compounds are {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)porphyrinato}silver(II), {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)quinoxalino[2,3-b']porphyrinato}silver(II), {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)bisquinoxalino[2,3-b':7,8-b']porphyrinato}silver(II), and {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)bisquinoxalino[2,3-b':12,13-b']porphyrinato}silver(II). The first one-electron oxidation and first one-electron reduction both occur at the metal center to produce stable compounds with Ag(III) or Ag(I) metal oxidation states, irrespective of the type of porphyrin ligand. The electrochemical HOMO-LUMO gap, determined by the difference in the first oxidation and first reduction potentials, decreases by introduction of quinoxaline groups fused to the Ag(II) porphyrin macrocycle. This provides a unique androgynous character to Ag(II) quinoxalinoporphyrins that enables them to act as both good electron donors and good electron acceptors, something not previously observed in other metalloporphyrin complexes. The second one-electron oxidation and second one-electron reduction of the compounds both occur at the porphyrin macrocycle to produce Ag(III) porphyrin pi-radical cations and Ag(I) porphyrin pi-radical anions, respectively. The macrocycle-centered oxidation potentials of each quinoxalinoporphyrin are shifted in a negative direction, while the macrocycle-centered reduction potentials are shifted in a positive direction as compared to the same electrode reactions of the porphyrin without the fused quinoxaline ring(s). Both potential shifts are due to a stabilization of the radical cations and radical anions by pi-extension of the porphyrin macrocycle after fusion of one or two quinoxaline moieties at the beta-pyrrolic positions of the macrocycle. Introduction of quinoxaline groups fused to the Ag(II) porphyrin macrocycle provides a unique androgynous character to Ag(II) quinoxalinoporphyrins that enables them to act as both good electron donors and good electron acceptors.     

电泳沉积制备氧化石墨烯-银电极及其氧还原催化性能

通过在1-甲基-2-吡咯烷酮（NMP）中超声剥离氧化石墨制备出稳定的氧化石墨烯（GO）分散液,添加AgNO₃使氧化石墨烯吸附Ag+而带正电荷。采用电泳沉积法使GO沉积到阴极的玻璃碳电极上,Ag+被电化学还原为单质银,均匀的分散在GO片层当中。通过AFM、SEM、Raman、XRD及元素面扫分析对制备电极的形貌、结构进行表征。在碱性环境中进行氧还原测试,结果表明GO+Ag电极的氧还原起始电位较玻璃碳电极最大正移228mV,还原电流密度最大为7.564mA·cm^-2,是玻璃碳电极的3.4倍。通过不同转速下的线性扫描曲线绘制Koutechy-Levich图,计算氧还原反应的电子转移数为3.3。     

电泳沉积制备氧化石墨烯-银电极及其氧还原催化性能

通过在1-甲基-2-吡咯烷酮(NMP)中超声剥离氧化石墨制备出稳定的氧化石墨烯(GO)分散液,添加AgNO3使氧化石墨烯吸附Ag+而带正电荷。采用电泳沉积法使GO沉积到阴极的玻璃碳电极上,Ag+被电化学还原为单质银,均匀的分散在GO片层当中。通过AFM、SEM、Raman、XRD及元素面扫分析对制备电极的形貌、结构进行表征。在碱性环境中进行氧还原测试,结果表明GO+Ag电极的氧还原起始电位较玻璃碳电极最大正移228 mV,还原电流密度最大为7.564 mA·cm-2,是玻璃碳电极的3.4倍。通过不同转速下的线性扫描曲线绘制Koutechy-Levich图,计算氧还原反应的电子转移数为3.3。     

Silver-coated TiO2 nanostructured anode materials for lithium ion batteries

Anatase TiO₂ nanoribbons/nanotubes (TiO₂-NRTs) have been synthesised successfully via a reflux method followed by drying in a vacuum oven, and then, silver-coated TiO₂ NRTs (Ag/TiO₂-NRTs) were prepared by coating silver particles onto the TiO₂-NRTs surface by the traditional silver mirror reaction. The physical properties of the synthesised products were examined in detail using X-ray diffraction, field emission gun scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy, respectively. The results indicated that the Ag nanoparticles were uniformly deposited on the surface of the TiO₂ nanoribbons/nanotubes. The electrochemical properties were investigated by a variety of techniques. The rate capability and cycle durability for the Ag/TiO₂-NRTs were improved compared with TiO₂-NRTs. It is speculated that the Ag-coated TiO₂ nanoribbons/nanotubes are an effective anode candidate for lithium ion batteries.     

The first measured Ag I, Ag II and Ag III Stark broadening parameters

The Stark widths (W) and shifts (d) of two neutral (520.908 and 546.550 nm), eleven singly (211.382, 224.643, 224.874, 232.029, 232.468, 233.140, 241.141, 241.323, 243.781, 244.793 and 276.754 nm) and three doubly (216.189, 231.004 and 239.569 nm) ionized silver (Ag I, Ag II and Ag III, respectively) spectral lines have been measured in nitrogen plasma at about 18,000 K electron temperature and electron density ranged between 0.65 × 10²³ and 1.15 × 10²³ m^− 3. They are the first measured W and d values while those of the Ag II and Ag III lines are the first published data in these spectra. The modified version of the linear, low-pressure, pulsed arc was used as a plasma source operated in nitrogen with silver atoms, as impurities, evaporated from silver cylindrical plates located in the homogeneous part of the discharge. No theoretical predictions exist for W and d values of above mentioned spectral lines. Besides, we have checked the transition probability ratio of two investigated Ag I lines. An agreement with theoretical predictions was found.     

Preparation of Antibacterial Waterborne Polyurethane/silver Nanocomposite

Stable aqueous dispersions of silver (Ag) nanoparticles were prepared by reducing silver nitrate solutions with sodium borohydride (NaBH₄) in the presence of waterborne polyurethane as a stabilizing agent. WPU/Ag nanocomposites were obtained after evaporating water. Transmission electron microscope (TEM) shows nanoscale Ag particles are well dispersed in WPU matrix at a lower concentration, while particles exhibit a little aggregation at a higher concentration. UV‐visible spectra, X‐ray powder diffraction, and energy dispersive X‐ray spectrometer (EDS) confirm the existence of Ag particle in WPU matrix. The WPU/Ag composite films show good antibiotic ability.     

Effect of Chemical Charging/Discharging on Plasmonic Behavior of Silver Metal Nanoparticles Prepared using Citrate‐Stabilized Cadmium Selenide Quantum Dots

The thermodynamics and kinetics of the chemical and electrochemical charging of a catalyst surface are very important to understand its applicability as a catalyst material, particularly in redox catalysis. Through the present study, we hereby communicate the results obtained from our detailed investigations related to the effect of chemical charging on the plasmonic behavior of silver metal nanoparticles (Ag MNPs) as redox catalysts. Two different batches of Ag MNPs were prepared through thermally assisted chemical reduction of silver ions. The difference in these batches was the use or not of citrate‐capped cadmium selenide quantum dots (Q‐CdSe) for the reduction of solution‐phase silver ions to their colloidal plasmonic phase. The charge on the surfaces of the Ag MNPs was varied by the chemical electron injection method by using BH₄^? ions from a NaBH₄ solution. The processes of charging and discharging were monitored by using UV/Vis absorption spectroscopy. The impact of the concentration of the reductant on the charging and discharging processes was also investigated. The Ag MNPs were also tested for their voltammetric response, wherein it was observed that it was more difficult to oxidize the Ag MNPs prepared with Q‐CdSe seeds than to oxidize Ag MNPs prepared without Q‐CdSe particles. Our results demonstrate that Q‐CdSe seeds not only enhance the redox catalytic activity of Ag MNPs but also provide stability towards polarization of their plasmonic behavior.     

Giant magnetoresistance in Co–Ag granular films prepared by electrodeposition

Preparation of granular magnetic Co–Ag films produced by pulsed electrodeposition from a chloride bath containing both cobalt ions and a low concentration of silver has been investigated. Deposition of cobalt on Ag is performed by a double pulse method. Combining in situ electrochemical and microgravimetric measurements, the kinetics of silver and cobalt reduction are presented. The thickness and deposition rates are monitored using an electrochemical quartz crystal microbalance (EQCM) during the growth of each material. Magnetic measurements have shown a superparamagnetic behavior in agreement with the existence of very small cobalt particles. Giant magnetoresistance (GMR) of ∼2% at room temperature is observed for the Co₅Ag₉₅ sample.     

Kinetics of electrochemical reactions on the Ag(Hg)/Ag4RbI5 interface

The electrochemical behaviour of the Ag(Hg)/Ag₄RbI₅ interface is investigated by a potentiostatic pulse method. It is found that the rate-determining step of the electrode reaction is electron transfer with an exchange current density of 68 mA cm^–2 and a transfer coefficient of approximately 0.45. The order of the electrochemical reaction for silver oxidation is estimated from polarization investigations of silver amalgam in various concentrations. From this it is deduced that the mercury is ionized and is implanted in the electrolyte together with silver under anodic polarization: 15Ag+85Hg–100e^–→15Ag⁺+85Hg⁺. From comparison of the electrochemical behaviour of the Ag(Hg)/Ag₄RbI₅ and Ag/Ag₄RbI₅ interfaces it is concluded that the rate of anodic silver dissolution on the Ag/Ag₄RbI₅ interface is limited by crystallization effects. Electronic Publication     

Theoretical Design and Experimental Realization of Quasi Single Electron Enhancement in Plasmonic Catalysis

By a combination of theoretical and experimental design, we probed the effect of a quasi‐single electron on the surface plasmon resonance (SPR)‐mediated catalytic activities of Ag nanoparticles. Specifically, we started by theoretically investigating how the E‐field distribution around the surface of a Ag nanosphere was influenced by static electric field induced by one, two, or three extra fixed electrons embedded in graphene oxide (GO) next to the Ag nanosphere. We found that the presence of the extra electron(s) changed the E‐field distributions and led to higher electric field intensities. Then, we experimentally observed that a quasi‐single electron trapped at the interface between GO and Ag NPs in Ag NPs supported on graphene oxide (GO‐Ag NPs) led to higher catalytic activities as compared to Ag and GO‐Ag NPs without electrons trapped at the interface, representing the first observation of catalytic enhancement promoted by a quasi‐single electron.     

Preparation, characterization, and surface modification of silver nanoparticles in formamide

The reduction of silver ions in formamide is shown to take place spontaneously at room temperature without addition of any reductant. The growth of Ag particles was found to be dependent on Ag+ ion concentration. In the absence of any stabilizer, deposition of silver film on the glass walls of the container takes place. However, in the presence of poly(N-vinyl-2-pyrrolidone) (PVP) or colloidal silica (SiO2), which are capable of stabilizing silver nanoparticles by complexing and providing support, a clear dispersion was obtained. The formation of the silver nanoparticles under different conditions was investigated through UV-visible absorption spectrophotometry, gas chromatography, and also electron and atomic force microscopic techniques. Atomic force microscopy results for silver films prepared in the absence of any stabilizer showed the formation of polygonal particles with sizes around 100 nm. Transmission electron microscopy results showed that the prepared silver particles in the presence of PVP were around 20 nm. The Ag nanoparticles get oxidized in the presence of chloroform and toluene. Surface modification of silver film was done in the presence of the tetrasodium salt of ethylenediaminetetraaceticacid (Na4EDTA). It was shown that the reactivity of the silver film increased in its presence. The Fermi potential of silver particles in the presence of Na4EDTA seems to lie between -0.33 and -0.446 V vs NHE.     

A comparative study of morphology, reactivity and stability of synthesized silver nanoparticles using Bacillus subtilis and Catharanthus roseus (L.) G. Don

Large number of papers has been published recently on the eleventh group metallic elements such as Ag, Au and Cu. Our study was focused on biosynthesis of silver nanoparticles, their morphology, reactivity and stability. We were interested to check these properties in two different samples, S1 and S2, respectively. The biosynthesis of silver nanoparticles was achieved by reacting the samples with 1 mM concentration of silver nitrate, one involves bacteria (S1) and the other involves the plant extract (S2). Spectrophotometric analysis revealed that the particles exhibited two peaks, one at 440 nm (for S1) and the other at 390 nm (for S2). It is well known that longer wavelength corresponds to increase in particle size. Since, S1 has got a longer wavelength; it is not known, whether it forms isolated particles or agglomerates? Morphological characterization has been done by adopting the procedures of Negative staining and Wedge smear preparation methods. This hybrid method may be of interest to study agglomerated particles. Microscopic examination of the smear S1 shows predominantly triangular or hexagonal shaped agglomerated particles which were not observed in S2. Hence further characterization was done using SEM, EDAX and XRD. The S2 particles were in the range of 45–70 nm and were stable for even four months. This study indicated that particle size can be controlled from micrometer to nanometer size by varying biological reductants.     

Synthesis of Ag and Ag/SiO2 sols by solvothermal method and their bactericidal activity

Ag and Ag/SiO₂ sols containing nanocrystalline silver particles can be advantageously prepared by solvothermal methods using an autoclave with conventional thermal or microwave heating. In this process, the reduction of silver salts can be realized with alcohols like ethanol in the presence of polyvinylpyrrolidone at temperatures of more than 120 °C. Furthermore a combination of silver salt reduction with hydrolysis of alkoxysilanes during the solvothermal process can yield Ag/SiO₂ composite sols. Particle size and crystallinity of as-prepared particles are analyzed by means of X-ray diffraction and high-resolution transmission electron microscopy. Nanosized silver particles gained by this process exhibit antimicrobial properties that are investigated in detail after application on textile fabrics.     

Correlation between Electrochemical Impedance and Spectroscopic Measurements in Adsorbing Paraquat on Silver: Application in Underground Water Samples

The electrochemical impedance spectroscopy (EIS) has been used to study the interaction between paraquat and carbon modified by silver (Ag? CPE) and silver particles‐impregnated natural phosphate (Ag/NPh? CPE). This study was developed using spectrophotometry (UV? Vis) and infrared spectroscopy. The resulting interaction was controlled by adsorption at lower concentration (≤1.0×10^?5 mol L^?1) and by diffusion in the opposite case. Both electrodes are used to determining paraquat with a low detection limit (<1.0×10^?12 mol L^?1). The precision expressed as relative standard deviation RSD for the concentration level 1.0×10^?5 mol L^?1 of paraquat, (n=8) were 0.93 % and 1.1 % for Ag/NPh? CPE and Ag? CPE respectively.     

Disinfection of Escherichia Coli Gram Negative Bacteria Using Surface Modified TiO2: Optimization of Ag Metallization and Depiction of Charge Transfer Mechanism

The antibacterial activity of silver deposited TiO₂ (Ag‐TiO₂) against Gram negative Escherichia coli bacteria was investigated by varying the Ag metal content from 0.10 to 0.50% on the surface of TiO₂. Ag depositions by the photoreduction method were found to be stable. Surface silver metallization was confirmed by EDAX and XPS studies. Photoluminescence studies show that the charge carrier recombination is less for 0.1% Ag‐TiO₂ and this catalyst shows superior bactericidal activity under solar light irradiation compared to Sol gel TiO₂ (SG‐TiO₂) due to the surface plasmon effect. The energy levels of deposited Ag are dependent on the Ag content and it varies from ?4.64 eV to ?1.30 eV with respect to the vacuum energy level based on atomic silver to bulk silver deposits. The ability of electron transfer from Ag deposit to O₂ depends on the position of the energy levels. The 0.25% and 0.50% Ag depositions showed detrimental effect on bactericidal activity due to the mismatch of energy levels. The effect of the EROS (External generation of the Reactive Oxygen Species by 0.1% Ag‐TiO₂) and IROS (Interior generation of Reactive Oxygen Species within the bacteria) on the bactericidal inactivation is discussed in detail.     

1-苯基-5-巯基四氮唑和苯并三氮唑在胶态银和硫化银上的阳极抑制效应

为了研究抑制剂对银核和硫化银核的不同作用,本工作考察了1-苯基-5-巯基四氮唑(PMT)和苯并三氮唑(BTA)作为抑制剂在银核和硫化银核上物理显影的阳极抑制和解抑制效应.实验结果表明: 1)PMT和BTA对Ag核和银离子过量时制得的硫化银核,Ag₂S(Ag),的显影催化活性都有不同程度的抑制作用,而对硫离子过量时制得的硫化银核,Ag₂S(S),无明显的抑制作用,这可能是由于过量硫离子在硫化银核上的吸附要强于这两种抑制剂;2)S₂O₃^2-或I^-离子的存在对BTA在Ag核上有解抑制作用,不仅可恢复甚至提高Ag核的显影催化活性,而对Ag₂S核的抑制作用无明显影响; 3)与BTA不同,S2O₃^2-或I^-离子对PMT在Ag核上没有解抑制作用,对Ag₂S(Ag)核的抑制作用还稍有增强,而对Ag₂S(S)核稍有减弱;4)银溶胶中的表面增强拉曼谱(SERS)测量证实:BTA在Ag核上的吸附导致Ag核显影催化活性的下降,加入S2O₃^2-或I^-离子后致使BTA的SERS信号消失则意味着BTA在银核表面的脱附.以上这些结果说明阳极抑制机理在抑制效应中有重要作用.     

Formation of colloidal silver nanoparticles stabilized by Na+-poly(gamma-glutamic acid)-silver nitrate complex via chemical reduction process

Macromolecular and polyanionic Na⁺–poly(γ-glutamic acid) (PGA) silver nitrate complex acted as both a metal ion provider and a particle protector to fabricate nanosized silver colloids under chemical reduction by dextrose. The formation and size of particles have been characterized from transmission electron microscopy (TEM), dynamic light scattering analysis and UV–vis spectrophotometer. The results showed that the average particle size was 17.2 ± 3.4 to 37.3 ± 5.5 nm, apparently depending on the complex concentration. It was found that the rate constant and conversion of silver nanoparticles were proportional to the concentration of PGA. The growth mechanism of nanosized silver colloid was fully discussed. In addition, the in vitro cytotoxicity evaluated by L929 fibroblasts proliferation and antibacterial activity against Gram-positive strain (methicillin-resistant S. aureus (MRSA)) and Gram-negative strain (P. aeruginosa) bacteria have been assessed.     

Determination of Silver‐Modified Titanium Phosphate Nanoparticles by Voltammetric and Electrocatalytic Methods

The electrochemical determination of silver‐modified titanium phosphate nanoparticles (Ag‐TiPNPs) was performed using two electrochemical features of this novel kind of nanoparticles. First, a determination using the voltammetric activity of the silver from the Ag‐TiPNPs was carried out. Secondly, the electrocatalytic effect of Ag‐TiPNPs was shown for the first time to the hydrogen evolution reaction (HER) and the determination of these nanoparticles was performed by chronoamperometry using this electrocatalysis. Moreover, it was verified that the catalytic effect was due to the electroreduced silver since the unmodified titanium phosphate nanoparticles (TiPNPs) did not exhibit this effect. Detection limits as low as 0.1 and 0.75 ng µL^?1 of Ag‐TiPNPs were obtained with the voltammetric and chronoamperometric methods, respectively. 8‐channel screen‐printed electrochemical arrays (8xSPCEs) were employed as transducers to carry out these electrochemical studies, due to its low cost and time saving.