Visible‐Light‐Driven CO2 Reduction by Mesoporous Carbon Nitride Modified with Polymeric Cobalt Phthalocyanine

The integration of molecular catalysts with low‐cost, solid light absorbers presents a promising strategy to construct catalysts for the generation of solar fuels. Here, we report a photocatalyst for CO₂ reduction that consists of a polymeric cobalt phthalocyanine catalyst (CoPPc) coupled with mesoporous carbon nitride (mpg‐CN_x) as the photosensitizer. This precious‐metal‐free hybrid catalyst selectively converts CO₂ to CO in organic solvents under UV/Vis light (AM 1.5G, 100 mW cm^?2, λ>300 nm) with a cobalt‐based turnover number of 90 for CO after 60 h. Notably, the photocatalyst retains 60 % CO evolution activity under visible light irradiation (λ>400 nm) and displays moderate water tolerance. The in situ polymerization of the phthalocyanine allows control of catalyst loading and is key for achieving photocatalytic CO₂ conversion.     

Enantioselective Intramolecular [2+2] Photocycloaddition Reactions of 4‐Substituted Coumarins Catalyzed by a Chiral Lewis Acid

Eight coumarins, which carry a terminal alkene tethered by a CH₂XCH₂ group to their 4‐position (X=CH₂, CMe₂, O, S, NBoc, NZ, NTs, NBn), were synthesized in overall yields of 51–80 %. Starting materials for the syntheses were either commercially available 4‐hydroxycoumarin or 4‐formylcoumarin. The intramolecular [2+2] photocycloaddition of these coumarins gave diastereoselectively products with a tetracyclic 3,3a,4,4a‐tetrahydro‐1H‐cyclopenta[2,3]cyclobuta[1,2‐c]chromen‐5(2H)‐one skeleton. Direct irradiation at λ=300 nm in dichloromethane (c=10 mM ) led to product formation in good yields for most substrates, presumably via a singlet excited state intermediate. Due to the low coumarin absorption at λ >350 nm the photocycloaddition was slow upon irradiation at λ=366 nm. Addition of a chiral oxazaborolidine‐based Lewis acid (50 mol %) increased the reaction rate at λ=366 nm and induced a significant enantioselectivity in the [2+2] photocycloaddition. Six out of eight coumarin substrates (X=CH₂, CMe₂, O, NBoc, NZ, NTs) gave the respective products in yields of 72–96 % and with 74–90 % enantiomeric excess (ee) upon irradiation in dichloromethane (c=20 mM ) at ?75 °C. The Lewis acid presumably acts by coordination to the coumarin carbonyl oxygen atom, which leads to a bathochromic shift (redshift) of the UV absorption and which increases the singlet state lifetime. A second electrostatic interaction of the hydrogen atom at C3 with the oxygen atom of the oxazaborolidine is likely.     

Synthesis of a new iron–sulfur cluster compound and its photocatalytic H2 evolution activity through visible light irradiation

A new iron–sulfur cluster compound, namely [(μ‐BNT)Fe₂(CO)₆] ( A ; BNT = (R)‐1,1′‐binaphthalene‐2,2′‐dithiol), was synthesized by self‐assembly of BNT with [Fe₃(CO)₁₂] and characterized using ¹H NMR, ¹³C NMR, infrared spectra and elemental analysis. The H₂ evolution activity of A was evaluated in a constructed homogeneous photocatalytic system by combining A as catalyst, xanthene dyes as photosensitizer and triethylamine as sacrificial reagent, to give efficient H₂ generation under visible‐light irradiation (λ > 420 nm). The maximum H₂ evolution of 404 turnovers (versus catalyst) was recorded under optimal conditions in CH₃CN–H₂O (1:1, v/v) after 4 h irradiation. The mechanism of H₂ evolution is briefly discussed using fluorescence spectra and electrochemical analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

Improving the Photocatalytic Reduction of CO2 to CO through Immobilisation of a Molecular Re Catalyst on TiO2

The photocatalytic activity of phosphonated Re complexes, [Re(2,2′‐bipyridine‐4,4′‐bisphosphonic acid) (CO)₃(L)] (ReP; L=3‐picoline or bromide) immobilised on TiO₂ nanoparticles is reported. The heterogenised Re catalyst on the semiconductor, ReP–TiO₂ hybrid, displays an improvement in CO₂ reduction photocatalysis. A high turnover number (TON) of 48 mol_CO mol_Re^?1 is observed in DMF with the electron donor triethanolamine at λ>420 nm. ReP–TiO₂ compares favourably to previously reported homogeneous systems and is the highest TON reported to date for a CO₂‐reducing Re photocatalyst under visible light irradiation. Photocatalytic CO₂ reduction is even observed with ReP–TiO₂ at wavelengths of λ>495 nm. Infrared and X‐ray photoelectron spectroscopies confirm that an intact ReP catalyst is present on the TiO₂ surface before and during catalysis. Transient absorption spectroscopy suggests that the high activity upon heterogenisation is due to an increase in the lifetime of the immobilised anionic Re intermediate (t_{50 %}>1 s for ReP–TiO₂ compared with t_{50 %}=60 ms for ReP in solution) and immobilisation might also reduce the formation of inactive Re dimers. This study demonstrates that the activity of a homogeneous photocatalyst can be improved through immobilisation on a metal oxide surface by favourably modifying its photochemical kinetics.     

Structural and photocatalytic properties of the new solid photocatalyst In2BiTaO7

In₂BiTaO₇ was synthesized using the solid-state reaction method and its photocatalytic properties were investigated. The results of powder X-ray diffraction (XRD) indicated that the compound crystallizes in the pyrochlore-type structure, cubic system with space group Fd-3m. The lattice parameter is 10.6972(1) ?. In addition, the compound shows strong optical absorption in the visible region (λ > 420 nm) and the band gap of In₂BiTaO₇ was estimated to be about 2.47 eV. For the photocatalytic reaction, H₂ or O₂ evolution was observed from CH₃OH/H₂O or AgNO₃ solution respectively with In₂BiTaO₇ as the photocatalyst under visible light irradiation, indicating that In₂BiTaO₇ is responsive to visible light for splitting water. Furthermore, the catalyst remained photoactive in the wavelength range up to 510 nm. Photocatalytic degradation of methylene blue (MB) dye over the compound was further investigated under visible light irradiation. The results showed that complete removal of aqueous MB could be achieved after irradiation for 135 min over In₂BiTaO₇. Furthermore, under visible light irradiation In₂BiTaO₇ showed markedly higher catalytic activity compared to P-25 for MB photocatalytic degradation.     

Undoped Layered Perovskite Oxynitride Li2LaTa2O6N for Photocatalytic CO2 Reduction with Visible Light

Oxynitrides are promising visible‐light‐responsive photocatalysts, but their structures are almost confined with three‐dimensional (3D) structures such as perovskites. A phase‐pure Li₂LaTa₂O₆N with a layered perovskite structure was successfully prepared by thermal ammonolysis of a lithium‐rich oxide precursor. Li₂LaTa₂O₆N exhibited high crystallinity and visible‐light absorption up to 500 nm. As opposed to well‐known 3D oxynitride perovskites, Li₂LaTa₂O₆N supported by a binuclear Ru^II complex was capable of stably and selectively converting CO₂ into formate under visible light (λ>400 nm). Transient absorption spectroscopy indicated that, as compared to 3D oxynitrides, Li₂LaTa₂O₆N possesses a lower density of mid‐gap states that work as recombination centers of photogenerated electron/hole pairs, but a higher density of reactive electrons, which is responsible for the higher photocatalytic performance of this layered oxynitride.     

Sunlight‐Driven Hydrogen Peroxide Production from Water and Molecular Oxygen by Metal‐Free Photocatalysts

Design of green, safe, and sustainable process for the synthesis of hydrogen peroxide (H₂O₂) is a very important subject. Early reported processes, however, require hydrogen (H₂) and palladium‐based catalysts. Herein we propose a photocatalytic process for H₂O₂ synthesis driven by metal‐free catalysts with earth‐abundant water and molecular oxygen (O₂) as resources under sunlight irradiation (λ>400 nm). We use graphitic carbon nitride (g‐C₃N₄) containing electron‐deficient aromatic diimide units as catalysts. Incorporating the diimide units positively shifts the valence‐band potential of the catalysts, while maintaining sufficient conduction‐band potential for O₂ reduction. Visible light irradiation of the catalysts in pure water with O₂ successfully produces H₂O₂ by oxidation of water by the photoformed valence‐band holes and selective two‐electron reduction of O₂ by the conduction band electrons.     

Gold‐Nanoparticle‐Loaded Carbonate‐Modified Titanium(IV) Oxide Surface: Visible‐Light‐Driven Formation of Hydrogen Peroxide from Oxygen

Gold nanoparticle‐loaded rutile TiO₂ with a bimodal size distribution around 10.6 nm and 2.3 nm (BM‐Au/TiO₂) was prepared by the deposition precipitation and chemical reduction (DP‐CR) technique. Visible‐light irradiation (λ>430 nm) of the BM‐Au/TiO₂ plasmonic photocatalyst yields 35 μm H₂O₂ in aerated pure water at irradiation time (t_p)=1 h, and the H₂O₂ concentration increases to 640±60 μm by the addition of 4 % HCOOH as a sacrificing electron donor. Further, a carbonate‐modified surface BM‐Au/TiO₂ (BM‐Au/TiO₂‐CO₃^2?) generates a millimolar level of H₂O₂ at t_p=1 h with a quantum efficiency (Φ) of 5.4 % at λ=530 nm under the same conditions. The recycle experiments confirmed the stable performance of BM‐Au/TiO₂.     

Preparation of Excitation‐Independent Photoluminescent Graphene Quantum Dots with Visible‐Light Excitation/Emission for Cell Imaging

We report the first pyrrole‐ring surface‐functionalized graphene quantum dots (p‐GQDs) prepared by a two‐step hydrothermal approach under microwave irradiation in an ammonia medium. The most distinct feature of the functionalized GQDs is that both the excitation and emission wavelengths fall into the visible‐light region. The p‐GQDs are excited by visible light at λ_ex 490 nm (2.53 eV) to emit excitation‐independent photoluminescence at a maximum wavelength of λ_em 550 nm. This is thus far the longest emission wavelength reported for GQDs. Stable photoluminescence is achieved at pH 4–10 with an ionic strength of 1.2 mol L^?1 KCl. These features make the p‐GQDs excellent probes for bio‐imaging and bio‐labeling, which is demonstrated by imaging live HeLa cells.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

On the Most Powerful Chemical Traps for Bis(methoxycarbonyl)carbene (=2‐Methoxy‐1‐(methoxycarbonyl)‐2‐oxoethylidene)

The efficiency and validity of different chemical substrates for trapping bis(methoxycarbonyl)carbene (=2‐methoxy‐1‐(methoxycarbonyl)‐2‐oxoethylidene; 1 ) is dependent on the conditions of carbene generation. On conventional photolysis of dimethyldiazomalonate (=2‐diazopropanedioic acid dimethyl ester; 2 ) by long‐wave UV light (through a Pyrex filter, λ>290 nm), the most powerful trap for carbene 1 in the series of substrates Me₂S, MeOH, cyclohexane, and pyridine is Me₂S (with an efficiency ratio of ca. 6 : 4 : 2 : 1, resp.). When short‐wave decomposition of diazomalonate 2 is employed (through a quartz filter, λ>210 nm), more reliable and useful chemical traps for bis(methoxycarbonyl)carbene ( 1 ) are pyridine and cyclohexane, whose adducts with 1 are rather stable under short‐wave‐irradiation conditions. Application of alcohols for the trapping of 1 proves to be preferential when simultaneous monitoring of carbene and oxoketene formation during photolysis is necessary.     

Control of Surface Plasmon Resonance of Au/SnO2 by Modification with Ag and Cu for Photoinduced Reactions under Visible‐Light Irradiation over a Wide Range

Gold particles supported on tin(IV) oxide (0.2 wt % Au/SnO₂) were modified with copper and silver by the multistep photodeposition method. Absorption around λ=550 nm, attributed to surface plasmon resonance (SPR) of Au, gradually shifted to longer wavelengths on modification with Cu and finally reached λ=620 nm at 0.8 wt % Cu. On the other hand, the absorption shifted to shorter wavelength with increasing amount of Ag and reached λ=450 nm at 0.8 wt % Ag. These Cu‐ and Ag‐modified 0.2 wt % Au/SnO₂ materials (Cu‐Au/SnO₂ and Ag‐Au/SnO₂) and 1.0 wt % Au/SnO₂ were used for mineralization of formic acid to carbon dioxide in aqueous suspension under irradiation with visible light from a xenon lamp and three kinds of light‐emitting diodes with different wavelengths. The reaction rates for the mineralization of formic acid over these materials depend on the wavelength of light. Apparent quantum efficiencies of Cu‐Au/SnO₂, Au/SnO₂, and Ag‐Au/SnO₂ reached 5.5 % at 625 nm, 5.8 % at 525 nm, and 5.1 % at 450 nm, respectively. These photocatalysts can also be used for selective oxidation of alcohols to corresponding carbonyl compounds in aqueous solution under visible‐light irradiation. Broad responses to visible light in formic acid mineralization and selective alcohol oxidation were achieved when the three materials were used simultaneously.     

Bi2WO6 photocatalytic films fabricated by layer-by-layer technique from Bi2WO6 nanoplates and its spectral selectivity

Bi₂WO₆ multilayer films have been fabricated successfully by a layer-by-layer (LbL) technique from Bi₂WO₆ nanoplates, which show higher visible-light photoactivity (λ>420 nm) than that of Bi₂WO₆ nanoplate powders and P25 TiO₂ films. The films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and UV-visible absorption spectroscopy. Photocatalytic activities of the films were evaluated by the rhodamine B (RhB) decomposition under UV and visible-light irradiation. Thickness and photoactivity of the film can be modified easily by changing the deposition cycles. Bi₂WO₆ films have the spectral selectivity of the photocatalytic degradation of RhB. Under the wavelength greater than 300 nm, the RhB molecules tend to be transformed to rhodamine over Bi₂WO₆ films selectively. However, in the case of shorter wavelength (λ=254 nm) light irradiation, the RhB molecules can be photodegraded completely.     

Molecular Heterostructures of Covalent Triazine Frameworks for Enhanced Photocatalytic Hydrogen Production

Conjugated polymers have emerged as promising candidates for photocatalytic H₂ production owing to their structural designability and functional diversity. However, the fast recombination of photoexcited electrons and holes limits their H₂ production rates. We have now designed molecular heterostructures of covalent triazine frameworks to facilitate charge‐carrier separation and promote photocatalytic H₂ production. Benzothiadiazole and thiophene moieties were selectively incorporated into the covalent triazine frameworks as electron‐withdrawing and electron‐donating units, respectively, by a sequential polymerization strategy. The resulting hybrids exhibited much improved charge‐carrier‐separation efficiency as evidenced by photophysical and electrochemical characterization. An H₂ evolution rate of 6.6 mmol g^?1 h^?1 was measured for the optimal sample under visible‐light irradiation (λ>420 nm), which is far superior to that of most reported conjugated‐polymer photocatalysts.     

Reforming of CO<Subscript>2</Subscript>-Containing Natural Gas Using an AC Gliding Arc System: Effect of Gas Components in Natural Gas

The objective of the present work was to study the reforming of simulated natural gas via the nonthermal plasma process with the focus on the production of hydrogen and higher hydrocarbons. The reforming of simulated natural gas was conducted in an alternating current (AC) gliding arc reactor under ambient conditions. The feed composition of the simulated natural gas contained a CH₄:C₂H₆:C₃H₈:CO₂ molar ratio of 70:5:5:20. To investigate the effects of all gaseous hydrocarbons and CO₂ present in the natural gas, the plasma reactor was operated with different feed compositions: pure CH₄, CH₄/He, CH₄/C₂H₆/He, CH₄/C₂H₆/C₃H₈/He and CH₄/C₂H₆/C₃H₈/CO₂. The results showed that the addition of gas components to the feed strongly influenced the reaction performance and the plasma stability. In comparisons among all the studied feed systems, both hydrogen and C₂ hydrocarbon yields were found to depend on the feed gas composition in the following order: CH₄/C₂H₆/C₃H₈/CO₂ > CH₄/C₂H₆/C₃H₈/He > CH₄/C₂H₆/He > CH₄/He > CH₄. The maximum yields of hydrogen and C₂ products of approximately 35% and 42%, respectively, were achieved in the CH₄/C₂H₆/C₃H₈/CO₂ feed system. In terms of energy consumption for producing hydrogen, the feed system of the CH₄/C₂H₆/C₃H₈/CO₂ mixture required the lowest input energy, in the range of 3.58 × 10⁻¹⁸–4.14 × 10⁻¹⁸ W s (22.35–25.82 eV) per molecule of produced hydrogen.     

Hydrophilicity Control of Visible‐Light Hydrogen Evolution and Dynamics of the Charge‐Separated State in Dye/TiO2/Pt Hybrid Systems

Visible‐light‐driven H₂ evolution based on Dye/TiO₂/Pt hybrid photocatalysts was investigated for a series of (E)‐3‐(5′‐{4‐[bis(4‐R¹‐phenyl)amino]phenyl}‐4,4′‐(R²)₂‐2,2′‐bithiophen‐5‐yl)‐2‐cyanoacrylic acid dyes. Efficiencies of hydrogen evolution from aqueous suspensions in the presence of ethylenediaminetetraacetic acid as electron donor under illumination at λ>420 nm were found to considerably depend on the hydrophilic character of R¹, varying in the order MOD (R¹=CH₃OCH₂, R²=H)≈ MO4D (R¹=R²=CH₃OCH₂)> HD (R¹=R²=H)> PD (R¹=C₃H₇, R²=H). In the case of MOD /TiO₂/Pt, the apparent quantum yield for photocatalyzed H₂ generation at 436 nm was 0.27±0.03. Transient absorption measurements for MOD ‐ or PD ‐grafted transparent films of TiO₂ nanoparticles dipped into water at pH 3 commonly revealed ultrafast formation (<100 fs) of the dye radical cation (Dye^.+) followed by multicomponent decays, which involve minor fast decays (<5 ps) almost independent of R¹ and major slower decays with significant differences between the two samples: 1) the early decay of the major components for MOD is about 2.5 times slower than that for PD and 2) a redshift of the spectrum occurred for MOD with a time constant of 17 ps, but not for PD . The substituent effects on H₂ generation as well as on transient behavior have been discussed in terms substituent‐dependent charge recombination (CR) of Dye^.+ with electrons in bulk, inner‐trap, and/or interstitial‐trap states, arising from different solvent reorganization.     

A Dinuclear Cobalt Cryptate as a Homogeneous Photocatalyst for Highly Selective and Efficient Visible‐Light Driven CO2 Reduction to CO in CH3CN/H2O Solution

A dinuclear cobalt complex [Co₂(OH)L¹](ClO₄)₃ ( 1 , L¹=N[(CH₂)₂NHCH₂(m ‐C₆H₄)CH₂NH(CH₂)₂]₃N) displays high selectivity and efficiency for the photocatalytic reduction of CO₂ to CO in CH₃CN/H₂O (v/v=4:1) under a 450 nm LED light irradiation, with a light intensity of 100 mW cm⁻². The selectivity reaches as high as 98 %, and the turnover numbers (TON) and turnover frequencies (TOF) reach as high as 16896 and 0.47 s⁻¹, respectively, with the calculated quantum yield of 0.04 %. Such high activity can be attributed to the synergistic catalysis effect between two Co^II ions within 1 , which is strongly supported by the results of control experiments and DFT calculations.     

ZnSe Nanorods as Visible‐Light Absorbers for Photocatalytic and Photoelectrochemical H2 Evolution in Water

A precious‐metal‐ and Cd‐free photocatalyst system for efficient H₂ evolution from aqueous protons with a performance comparable to Cd‐based quantum dots is presented. Rod‐shaped ZnSe nanocrystals (nanorods, NRs) with a Ni(BF₄)₂ co‐catalyst suspended in aqueous ascorbic acid evolve H₂ with an activity up to 54±2 mmol g_ZnSe^?1 h^?1 and a quantum yield of 50±4 % (λ=400 nm) under visible light illumination (AM 1.5G, 100 mW cm^?2, λ>400 nm). Under simulated full‐spectrum solar irradiation (AM 1.5G, 100 mW cm^?2), up to 149±22 mmol g_ZnSe^?1 h^?1 is generated. Significant photocorrosion was not noticeable within 40 h and activity was even observed without an added co‐catalyst. The ZnSe NRs can also be used to construct an inexpensive delafossite CuCrO₂ photocathode, which does not rely on a sacrificial electron donor. Immobilized ZnSe NRs on CuCrO₂ generate photocurrents of around ?10 μA cm^?2 in an aqueous electrolyte solution (pH 5.5) with a photocurrent onset potential of approximately +0.75 V vs. RHE. This work establishes ZnSe as a state‐of‐the‐art light absorber for photocatalytic and photoelectrochemical H₂ generation.     

基于密度泛函理论对等离子体中H/CO2相互作用的第一性原理研究

深入理解辐照条件下氢同位素与CO₂反应的微观机制,可为聚变堆氘氚燃料循环工艺的优化设计提供数据支撑。基于此,采用第一性原理计算研究了等离子体放电条件下H₂和CO₂的微观反应机制,研究了不同温度和氢同位素效应对反应过程的影响。通过内禀反应坐标（IRC）算法结合反应过渡态获得4条初始反应路径,并对比研究了生成产物CH₄及CH₃OH的2条路径在热力学上的容易程度,以及不同氢同位素对各个反应的影响。研究发现,氚的自发衰变或等离子体中的高能电子都会诱导氢同位素与CO₂发生反应,形成CO、H₂O、CH₄及CH₃OH等产物;在高能电子诱导CO₂的离解后,由4条初始反应路径组成的复杂反应可以自持发生,且该复杂反应中存在2种倾向;升高反应温度对CO₂转化为有机物（CH₄和CH₃OH）具有一定的促进作用。     

Theoretical influence of third molecule on reaction channels of weakly bound complex CO2… HF systems

In this investigation, reaction channels of weakly bound complexes CO₂…HF, CO₂…HF…NH₃, CO₂…HF…H₂O and CO₂…HF…CH₃OH systems were established at the B3LYP/6‐311++G(3df,2pd) level, using the Gaussian 98 program. The conformers of syn‐fluoroformic acid or syn‐fluoroformic acid plus a third molecule (NH₃, H₂O, or CH₃OH) were found to be more stable than the conformers of the related anti‐fluoroformic acid or anti‐fluoroformic acid plus a third molecule (NH₃, H₂O, or CH₃OH). However, the weakly bound complexes were found to be more stable than either the related syn‐ and anti‐type fluoroformic acid or the acid plus third molecule (NH₃, H₂O, or CH₃OH) conformers. They decomposed into CO₂ + HF, CO₂ + NH₄F, CO₂ + H₃OF or CO₂ + (CH₃)OH₂F combined molecular systems. The weakly bound complexes have four reaction channels, each of which includes weakly bound complexes and related systems. Moreover, each reaction channel includes two transition state structures. The transition state between the weakly bound complex and anti‐fluoroformic acid type structure (T₁₃) is significantly larger than that of internal rotation (T₂₃) between the syn‐ and anti‐FCO₂H (or FCO₂H…NH₃, FCO₂H…H₂O, or FCO₂H…CH₃OH) structures. However, adding the third molecule NH₃, H₂O, or CH₃OH can significantly reduce the activation energy of T₁₃. The catalytic strengths of the third molecules are predicted to follow the order H₂O < NH₃ < CH₃OH. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006