Double‐Helix Structure in Carrageenan–Metal Hydrogels: A General Approach to Porous Metal Sulfides/Carbon Aerogels with Excellent Sodium‐Ion Storage

The metal sulfide‐carbon nanocomposite is a new class of anode material for sodium ion batteries, but its development is restricted by its relative poor rate ability and cyclic stability. Herein, we report the use of double‐helix structure of carrageenan–metal hydrogels for the synthesis of 3D metal sulfide (M_xS_y) nanostructure/carbon aerogels (CAs) for high‐performance sodium‐ion storage. The method is unique, and can be used to make multiple M_xS_y/CAs (such as FeS/CA, Co₉S₈/CA, Ni₃S₄/CA, CuS/CA, ZnS/CA, and CdS/CA) with ultra‐small nanoparticles and hierarchical porous structure by pyrolyzing the carrageenan–metal hydrogels. The as‐prepared FeS/CA exhibits a high reversible capacity and excellent cycling stability (280 mA h^?1 at 0.5 A g^?1 over 200 cycles) and rate performance (222 mA h^?1 at 5 A g^?1) when used as the anode material for sodium‐ion batteries. The work shows the value of biomass‐derived metal sulfide–carbon heterostuctures in sodium‐ion storage.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.     

Microwave Irradiation for the Facile Synthesis of Transition‐Metal Nanoparticles (NPs) in Ionic Liquids (ILs) from Metal–Carbonyl Precursors and Ru‐, Rh‐, and Ir‐NP/IL Dispersions as Biphasic Liquid–Liquid Hydrogenation Nanocatalysts for Cyclohexene

Stable chromium, molybdenum, tungsten, manganese, rhenium, ruthenium, osmium, cobalt, rhodium, and iridium metal nanoparticles (M‐NPs) have been reproducibly obtained by facile, rapid (3 min), and energy‐saving 10 W microwave irradiation (MWI) under an argon atmosphere from their metal–carbonyl precursors [M_x(CO)_y] in the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]). This MWI synthesis is compared to UV‐photolytic (1000 W, 15 min) or conventional thermal decomposition (180–250 °C, 6–12 h) of [M_x(CO)_y] in ILs. The MWI‐obtained nanoparticles have a very small (<5 nm) and uniform size and are prepared without any additional stabilizers or capping molecules as long‐term stable M‐NP/IL dispersions (characterization by transmission electron microscopy (TEM), transmission electron diffraction (TED), and dynamic light scattering (DLS)). The ruthenium, rhodium, or iridium nanoparticle/IL dispersions are highly active and easily recyclable catalysts for the biphasic liquid–liquid hydrogenation of cyclohexene to cyclohexane with activities of up to 522 (mol product) (mol Ru)^?1 h^?1 and 884 (mol product) (mol Rh)^?1 h^?1 and give almost quantitative conversion within 2 h at 10 bar H₂ and 90 °C. Catalyst poisoning experiments with CS₂ (0.05 equiv per Ru) suggest a heterogeneous surface catalysis of Ru‐NPs.     

Titanium and Zirconium Complexes with Non‐Salicylaldimine‐Type Imine–Phenoxy Chelate Ligands: Syntheses,Structures, and Ethylene‐Polymerization Behavior

New Ti and Zr complexes that bear imine–phenoxy chelate ligands, [{2,4‐di‐tBu‐6‐(RCH=N)‐C₆H₄O}₂MCl₂] ( 1 : M=Ti, R=Ph; 2 : M=Ti, R=C₆F₅; 3 : M=Zr, R=Ph; 4 : M=Zr, R=C₆F₅), were synthesized and investigated as precatalysts for ethylene polymerization. ¹H NMR spectroscopy suggests that these complexes exist as mixtures of structural isomers. X‐ray crystallographic analysis of the adduct 1 ?HCl reveals that it exists as a zwitterionic complex in which H and Cl are situated in close proximity to one of the imine nitrogen atoms and the central metal, respectively. The X‐ray molecular structure also indicates that one imine phenoxy group with the syn C?N configuration functions as a bidentate ligand, whereas the other, of the anti C?N form, acts as a monodentate phenoxy ligand. Although Zr complexes 3 and 4 with methylaluminoxane (MAO) or [Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ displayed moderate activity, the Ti congeners 1 and 2 , in association with an appropriate activator, catalyzed ethylene polymerization with high efficiency. Upon activation with MAO at 25 °C, 2 displayed a very high activity of 19900 (kg PE) (mol Ti)^?1 h^?1, which is comparable to that for [Cp₂TiCl₂] and [Cp₂ZrCl₂], although increasing the polymerization temperature did result in a marked decrease in activity. Complex 2 contains a C₆F₅ group on the imine nitrogen atom and mediated nonliving‐type polymerization, unlike the corresponding salicylaldimine‐type complex. Conversely, with [Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ activation, 1 exhibited enhanced activity as the temperature was increased (25–75 °C) and maintained very high activity for 60 min at 75 °C (18740 (kg PE) (mol Ti)^?1 h^?1). ¹H NMR spectroscopic studies of the reaction suggest that this thermally robust catalyst system generates an amine–phenoxy complex as the catalytically active species. The combinations 1 /[Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ and 2 /MAO also worked as high‐activity catalysts for the copolymerization of ethylene and propylene.     

Solvent‐Vapor‐Induced Reversible Single‐Crystal‐to‐Single‐Crystal Transformation of a Triphosphaazatriangulene‐Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha‐Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π‐conjugated framework, which enables the stimuli‐responsive reversible transformation of [Cu(HL)(DMSO)?(MeOH)]_n, a 3D‐MOF that exhibits reversible sorption characteristics, into (H₃L?0.5 [Cu₂(OH)₄?6 H₂O] ?4 H₂O), a 1D‐columnar assembled proton‐conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10^?3 S cm^?1 at 95 % relative humidity and 60 °C.     

Proton Order–Disorder Phenomena in a Hydrogen‐Bonded Rhodium–η5‐Semiquinone Complex: A Possible Dielectric Response Mechanism

A newly synthesized one‐dimensional (1D) hydrogen‐bonded (H‐bonded) rhodium(II)–η⁵‐semiquinone complex, [Cp*Rh(η⁵‐p‐HSQ‐Me₄)]PF₆ ([ 1 ]PF₆; Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl; HSQ=semiquinone) exhibits a paraelectric–antiferroelectric second‐order phase transition at 237.1 K. Neutron and X‐ray crystal structure analyses reveal that the H‐bonded proton is disordered over two sites in the room‐temperature (RT) phase. The phase transition would arise from this proton disorder together with rotation or libration of the Cp* ring and PF₆^? ion. The relative permittivity ε_b′ along the H‐bonded chains reaches relatively high values (ca., 130) in the RT phase. The temperature dependence of ¹³C CP/MAS NMR spectra demonstrates that the proton is dynamically disordered in the RT phase and that the proton exchange has already occurred in the low‐temperature (LT) phase. Rate constants for the proton exchange are estimated to be 10^?4–10^?6 s in the temperature range of 240–270 K. DFT calculations predict that the protonation/deprotonation of [ 1 ]⁺ leads to interesting hapticity changes of the semiquinone ligand accompanied by reduction/oxidation by the π‐bonded rhodium fragment, producing the stable η⁶‐hydroquinone complex, [Cp*Rh³⁺(η⁶‐p‐H₂Q‐Me₄)]²⁺ ([ 2 ]²⁺), and η⁴‐benzoquinone complex, [Cp*Rh⁺(η⁴‐p‐BQ‐Me₄)] ([ 3 ]), respectively. Possible mechanisms leading to the dielectric response are discussed on the basis of the migration of the protonic solitons comprising of [ 2 ]²⁺ and [ 3 ], which would be generated in the H‐bonded chain.     

Metal–Organic Frameworks Containing Missing‐Linker Defects Leading to High Hydroxide‐Ion Conductivity

The ionic conductivity properties of the face‐centered cubic [Ni₈(OH)₄(H₂O)₂(BDP_X)₆] (H₂BDP_X=1,4‐bis(pyrazol‐4‐yl)benzene‐4‐X with X=H ( 1 ), OH ( 2 ), NH₂ ( 3 )) metal–organic framework (MOF) systems as well as their post‐synthetically modified materials K[Ni₈(OH)₅(EtO)(BDP_X)_5.5] ( 1@KOH , 3@KOH ) and K₃[Ni₈(OH)₃(EtO)(BDP_O)₅] ( 2@KOH ), which contain missing‐linker defects, have been studied by variable temperature AC impedance spectroscopy. It should be noted that these modified materials exhibit up to four orders of magnitude increase in conductivity ^‐values in comparison to pristine 1 – 3 systems. As an example, the conductivity value of 5.86×10^?9 S cm^?1 (activation energy E_a of 0.60 eV) for 2 at 313 K and 22 % relative humidity (RH) increases up to 2.75×10^?5 S cm^?1 (E_a of 0.40 eV) for 2@KOH . Moreover, a further increase of conductivity values up to 1.16×10^?2 S cm^?1 and diminution of E_a down to 0.20 eV is achieved at 100 % RH for 2@KOH . The increased porosity, basicity and hydrophilicity of the 1@KOH – 3@KOH materials compared to the pristine 1 – 3 systems should explain the better performance of the KOH‐modified materials.     

Observation of Transition‐Metal–Boron Triple Bonds in IrB2O− and ReB2O−

Multiple bonds between boron and transition metals are known in many borylene (:BR) complexes via metal d_π→BR back‐donation, despite the electron deficiency of boron. An electron‐precise metal–boron triple bond was first observed in BiB₂O^? [Bi≡B?B≡O]^? in which both boron atoms can be viewed as sp‐hybridized and the [B?BO]^? fragment is isoelectronic to a carbyne (CR). To search for the first electron‐precise transition‐metal‐boron triple‐bond species, we have produced IrB₂O^? and ReB₂O^? and investigated them by photoelectron spectroscopy and quantum‐chemical calculations. The results allow to elucidate the structures and bonding in the two clusters. We find IrB₂O^? has a closed‐shell bent structure (C_s, ¹A′) with BO^? coordinated to an Ir≡B unit, (^?OB)Ir≡B, whereas ReB₂O^? is linear (C_∞v, ³Σ^?) with an electron‐precise Re≡B triple bond, [Re≡B?B≡O]^?. The results suggest the intriguing possibility of synthesizing compounds with electron‐precise M≡B triple bonds analogous to classical carbyne systems.     

Electrochemical Synthesis and Characterisation of Alternating Tripyridyl–Dipyrrole Molecular Strands with Multiple Nitrogen‐Based Donor–Acceptor Binding Sites

Synthesis of alternating pyridine–pyrrole molecular strands composed of two electron‐rich pyrrole units (donors) sandwiched between three pyridinic cores (acceptors) is described. The envisioned strategy was a smooth electrosynthesis process involving ring contraction of corresponding tripyridyl–dipyridazine precursors. 2,6‐Bis[6‐(pyridazin‐3‐yl)]pyridine ligands 2 a – c bearing pyridine residues at the terminal positions were prepared in suitable quantities by a Negishi metal cross‐coupling procedure. The yields of heterocyclic coupling between 2‐pyridyl zinc bromide reagents 12 a – c and 2,6‐bis(6‐trifluoromethanesulfonylpyridazin‐3‐yl)pyridine increased from 68 to 95 % following introduction of electron‐donating methyl groups on the metallated halogenopyridine units. Favorable conditions for preparative electrochemical reduction of tripyridyl–dipyridazines 2 b , c were established in THF/acetate buffer (pH 4.6)/acetonitrile to give the targeted 2,6‐bis[5‐(pyridin‐2‐yl)pyrrol‐2‐yl]pyridines 1 b and 1 c in good yields. The absorption behavior of the donor–acceptor tripyridyl–dipyrrole ligands was evaluated and compared to theoretical calculations. Highly fluorescent properties of these chromophores were found (ν_em≈2×10⁴ cm^?1 in MeOH and CH₂Cl₂), and both pyrrolic ligands exhibit a remarkable quantum yield in CH₂Cl₂ (?_f=0.10). Structural studies in the solid state established the preferred cis conformation of the dipyrrolic ligands, which adopting a planar arrangement with an embedded molecule of water having a complexation energy exceeding 10 kcal mol^?1. The ability of the tripyridyl–dipyrrole to complex two copper(II) ions in a pentacoordinate square was investigated.     

Complexation Properties of N,N′,N″,N′′′‐[1,4,7,10‐Tetraazacyclododecane‐1,4,7,10‐tetrayltetrakis(1‐oxoethane‐2,1‐diyl)]tetrakis[glycine] (H4dotagl). Equilibrium,Kinetic, and Relaxation Behavior of the Lanthanide(III) Complexes

Eu³⁺, Dy³⁺, and Yb³⁺ complexes of the dota‐derived tetramide N,N′,N″,N′′′‐[1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetrayltetrakis(1‐oxoethane‐2,1‐diyl)]tetrakis[glycine] (H₄dotagl) are potential CEST contrast agents in MRI. In the [Ln(dotagl)] complexes, the Ln³⁺ ion is in the cage formed by the four ring N‐atoms and the amide O‐atom donor atoms, and a H₂O molecule occupies the ninth coordination site. The stability constants of the [Ln(dotagl)] complexes are ca. 10 orders of magnitude lower than those of the [Ln(dota)] analogues (H₄dota=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The free carboxylate groups in [Ln(dotagl)] are protonated in the pH range 1–5, resulting in mono‐, di‐, tri‐, and tetraprotonated species. Complexes with divalent metals (Mg²⁺, Ca²⁺, and Cu²⁺) are also of relatively low stability. At pH>8, Cu²⁺ forms a hydroxo complex; however, the amide H‐atom(s) does not dissociate due to the absence of anchor N‐atom(s), which is the result of the rigid structure of the ring. The relaxivities of [Gd(dotagl)] decrease from 10 to 25°, then increase between 30–50°. This unusual trend is interpreted with the low H₂O‐exchange rate. The [Ln(dotagl)] complexes form slowly, via the equilibrium formation of a monoprotonated intermediate, which deprotonates and rearranges to the product in a slow, OH^?‐catalyzed reaction. The formation rates are lower than those for the corresponding Ln(dota) complexes. The dissociation rate of [Eu(dotagl)] is directly proportional to [H⁺] (0.1–1.0M HClO₄); the proton‐assisted dissociation rate is lower for [Eu(H₄dotagl)] (k₁=8.1?10^?6 M ^?1 s^?1) than for [Eu(dota)] (k₁=1.4?10^?5 M ^?1 s^?1).     

Fast Hydrocarbon Oxidation by a High‐Valent Nickel–Fluoride Complex

In the search for highly reactive oxidants we have identified high‐valent metal–fluorides as a potential potent oxidant. The high‐valent Ni–F complex [Ni^III(F)(L)] ( 2 , L=N,N′‐(2,6‐dimethylphenyl)‐2,6‐pyridinedicarboxamidate) was prepared from [Ni^II(F)(L)]^? ( 1 ) by oxidation with selectfluor. Complexes 1 and 2 were characterized by using ¹H/¹⁹F NMR, UV‐vis, and EPR spectroscopies, mass spectrometry, and X‐ray crystallography. Complex 2 was found to be a highly reactive oxidant in the oxidation of hydrocarbons. Kinetic data and products analysis demonstrate a hydrogen atom transfer mechanism of oxidation. The rate constant determined for the oxidation of 9,10‐dihydroanthracene (k₂=29 m ^?1 s^?1) compared favorably with the most reactive high‐valent metallo‐oxidants. Complex 2 displayed reaction rates 2000–4500‐fold enhanced with respect to [Ni^III(Cl)(L)] and also displayed high kinetic isotope effect values. Oxidative hydrocarbon and phosphine fluorination was achieved. Our results provide an interesting direction in designing catalysts for hydrocarbon oxidation and fluorination     

Anionic Gold(I) Complexes—Twelve‐ and Ten‐Vertex Monocarba‐closo‐borate Anions with Carbon–Gold σ Bonds

The anionic gold(I) complexes [1‐(Ph₃PAu)‐closo‐1‐CB₁₁H₁₁]^? ( 1 ), [1‐(Ph₃PAu)‐closo‐1‐CB₉H₉]^? ( 2 ), and [2‐(Ph₃PAu)‐closo‐2‐CB₉H₉]^? ( 3 ) with gold–carbon 2c–2e σ bonds have been prepared from [AuCl(PPh₃)] and the respective carba‐closo‐borate dianion. The anions have been isolated as their Cs⁺ salts and the corresponding [Et₄N]⁺ salts were obtained by salt metathesis reactions. The salt Cs‐ 3 isomerizes in the solid state and in solution at elevated temperatures to Cs‐ 2 with ΔH_iso=(?75±5) kJ mol^?1 (solid state) and ΔH^≠=(118±10) kJ mol^?1 (solution). The compounds were characterized by vibrational and multi‐NMR spectroscopies, mass spectrometry, elemental analysis, and differential scanning calorimetry. The crystal structures of [Et₄N]‐ 1 , [Et₄N]‐ 2 , and [Et₄N]‐ 3 were determined. The bonding parameters, NMR chemical shifts, and the isomerization enthalpy of Cs‐ 3 to Cs‐ 2 are compared to theoretical data.     

Crystal Structures and Proton Conductivities of a MOF and Two POM–MOF Composites Based on CuII Ions and 2,2′‐Bipyridyl‐3,3′‐dicarboxylic Acid

We have succeeded in constructing a metal–organic framework (MOF), [Cu(bpdc)(H₂O)₂]_n (H₂bpdc=2,2′‐bipyridyl‐3,3′‐dicarboxylic acid, 1 ), and two poly‐POM–MOFs (POM=polyoxometalate), {H[Cu(Hbpdc)(H₂O)₂]₂[PM₁₂O₄₀] ? n H₂O}_n (M=Mo for 2 , W for 3 ), by the controllable self‐assembly of H₂bpdc, Keggin‐anions, and Cu²⁺ ions based on electrostatic and coordination interactions. Notably, these three compounds all crystallized in the monoclinic space group P2₁/n, and the Hbpdc^? and bpdc^2? ions have the same coordination mode. Interestingly, in compounds 2 and 3 , Hbpdc^? and the Keggin‐anion are covalently linked to the transition metal copper at the same time as polydentate organic ligand and as polydentate inorganic ligand, respectively. Complexes 2 and 3 represent new and rare examples of introducing the metal N‐heterocyclic multi‐carboxylic acid frameworks into POMs, thereby, opening a pathway for the design and the synthesis of multifunctional hybrid materials based on two building units. The Keggin‐anions being immobilized as part of the metal N‐heterocyclic multi‐carboxylic acid frameworks not only enhance the thermal stability of compounds 2 and 3 , but also introduce functionality inside their structures, thereby, realizing four approaches in the 1D hydrophilic channel used to engender proton conductivity in MOFs for the first time. Complexes 2 and 3 exhibit good proton conductivity (10^?4 to ca. 10^?3 S cm^?1) at 100 °C in the relative humidity range 35 to about 98 %.     

C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands prepared by different in situ bonding mechanisms and their use in catalytic (co)polymerization of norbornene and styrene

Two C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands with electron‐withdrawing groups (─CF₃), Ni{PhC(O)CHC[N(9‐fluorenyl)]CF₂}₂ (Ni 1 ) and Ni{CF₃C(O)CHC[N(9‐fluorenyl)]Ph}₂ (Ni 2 ), were synthesized by metal coordination reaction and different in situ bonding mechanisms. The C–C bridged bonds of Ni 1 were formed by in situ intramolecular trifluoromethyl and 9‐fluorenyl carbon–carbon cross‐coupling reaction and those of Ni 2 were formed by in situ intramolecular 9‐fluorenyl carbon–carbon radical coupling reaction mechanism. The obtained complexes were characterized using ¹H NMR spectroscopy and elemental analyses. The crystal and molecular structures of Ni 1 and Ni 2 with C–C bridged configuration were determined using X‐ray diffraction. Ni 1 and Ni 2 were used as catalysts for norbornene (NB) polymerization after activation with B(C₆F₅)₃ and the catalytic activities reached 10⁶ g_polymer mol_Ni^?1 h^?1. The copolymerization of NB and styrene catalyzed by the Ni 1 /B(C₆F₅)₃ system showed high activity (10⁵ g_polymer mol_Ni^?1 h^?1) and the catalytic activities decreased with increasing feed content of styrene. All vinyl‐type copolymers exhibited high molecular weight (10⁴ g mol^?1), narrow molecular weight distribution (M_w/M_n = 1.71–2.80), high styrene insertion ratios (11.13–50.81%) and high thermal stability (T_d > 380°C) and could be made into thin films with high transparency in the visible region (400–800 nm).     

A novel PtII–dibenzo‐18‐crown‐6 (DB18C6) complex

The novel Pt^II–dibenzo‐18‐crown‐6 (DB18C6) title complex, μ‐[tetrakis­(thio­cyanato‐S)­platinum(II)]‐N:N′‐bis{[2,5,8,­15,18,21‐hexa­oxa­tri­cyclo­[20.4.0.1^9,14]­hexa­cosa‐1(22),9(14),10,12,23,25‐hexaene‐κ⁶O]­potassium(I)}, [K(C₂₀H₂₄O₆)]₂[Pt(SCN)₄], has been isolated and characterized by X‐ray diffraction analysis. The structure analysis shows that the complex displays a quasi‐one‐dimensional infinite chain of two [K(DB18C6)]⁺ complex cations and a [Pt(SCN)₄]^2? anion, bridged by K⁺?π interactions between adjacent [K(DB18C6)]⁺ units.     

A High‐Performance Organic Field‐Effect Transistor Based on Platinum(II) Porphyrin: Peripheral Substituents on Porphyrin Ligand Significantly Affect Film Structure and Charge Mobility

Organic field‐effect transistors incorporating planar π‐conjugated metal‐free macrocycles and their metal derivatives are fabricated by vacuum deposition. The crystal structures of [H₂(OX)] (H₂OX=etioporphyrin‐I), [Cu(OX)], [Pt(OX)], and [Pt(TBP)] (H₂TBP=tetra‐(n‐butyl)porphyrin) as determined by single crystal X‐ray diffraction (XRD), reveal the absence of occluded solvent molecules. The field‐effect transistors (FETs) made from thin films of all these metal‐free macrocycles and their metal derivatives show a p‐type semiconductor behavior with a charge mobility (μ) ranging from 10^?6 to 10^?1 cm² V^?1 s^?1. Annealing the as‐deposited Pt(OX) film leads to the formation of a polycrystalline film that exhibits excellent overall charge transport properties with a charge mobility of up to 3.2×10^?1 cm² V^?1 s^?1, which is the best value reported for a metalloporphyrin. Compared with their metal derivatives, the field‐effect transistors made from thin films of metal‐free macrocycles (except tetra‐(n‐propyl)porphycene) have significantly lower μ values (3.0×10^?6–3.7×10^?5 cm² V^?1 s^?1).     

Employing an Unsaturated Th4+ Site in a Porous Thorium–Organic Framework for Kr/Xe Uptake and Separation

Actinide based metal–organic frameworks (MOFs) are unique not only because compared to the transition‐metal and lanthanide systems they are substantially less explored, but also owing to the uniqueness of actinide ions in bonding and coordination. Now a 3D thorium–organic framework ( SCU‐11 ) contains a series of cages with an effective size of ca. 21×24 Å. Th⁴⁺ in SCU‐11 is 10‐coordinate with a bicapped square prism coordination geometry, which has never been documented for any metal cation complexes. The bicapped position is occupied by two coordinated water molecules that can be removed to afford a very unique open Th⁴⁺ site, confirmed by X‐ray diffraction, color change, thermogravimetry, and spectroscopy. The degassed phase ( SCU‐11‐A ) exhibits a Brunauer–Emmett–Teller surface area of 1272 m² g^?1, one of the highest values among reported actinide materials, enabling it to sufficiently retain water vapor, Kr, and Xe with uptake capacities of 234 cm³ g^?1, 0.77 mmol g^?1, 3.17 mmol g^?1, respectively, and a Xe/Kr selectivity of 5.7.     

Metal‐directed supramolecular architectures based on the bifunctional ligand 2,5‐bis(1H‐1,2,4‐triazol‐1‐yl)terephthalic acid

By the solvothermal reactions of 2,5‐bis(1H‐1,2,4‐triazol‐1‐yl)terephthalic acid (H₂L) with transition‐metal ions, two novel polymeric complexes, namely, poly[diaqua[μ₄‐2,5‐bis(1H‐1,2,4‐triazol‐1‐yl)terephthalato]cobalt(II)], [Co(C₁₂H₆N₆O₄)(H₂O)₂]_n, ( 1 ), and poly[[diaqua[μ₄‐2,5‐bis(1H‐1,2,4‐triazol‐1‐yl)terephthalato]nickel(II)] dihydrate], {[Ni(C₁₂H₆N₆O₄)(H₂O)₂]·2H₂O}_n, ( 2 ), were isolated. Both polymers have been characterized by FT–IR spectroscopy, elemental analysis and single‐crystal X‐ray diffraction analysis. The complexes have similar two‐dimensional layered structures and coordination modes. Furthermore, the two‐dimensional layered structures bear distinct intermolecular hydrogen‐bonding interactions and π–π stacking interactions to form two different three‐dimensional supramolecular networks based on 4⁴‐subnets. The structural variation depends on the nature of the metal cations. The results of variable‐temperature magnetization measurements (χ_MT?T and χ_M^?1?T) show that complexes ( 1 ) and ( 2 ) display antiferromagnetic behaviour.     

Co‐catalyst effects on the thermal stability/activity of N,N,N‐Co ethylene polymerization Catalysts Bearing Fluoro‐Substituted N‐2,6‐dibenzhydrylphenyl groups

The unsymmetrical bis (arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐t‐BuC₆H₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N‐aryl group bedecked with ortho‐substituted fluorobenzhydryl groups, have been employed in the preparation of the corresponding five‐coordinate cobalt (II) chelates, LCoCl₂ ( Co1 – Co5 ); the symmetrical comparator [2,6‐{CMeN(2,6‐(4‐FC₆H₄)₂CH)₂–4‐t‐BuC₆H₂}₂C₅H₃N]CoCl₂ (Co6) is also reported. All cobaltous complexes are paramagnetic and have been characterized by ¹H/¹⁹F NMR spectroscopy, FT‐IR spectroscopy and elemental analysis. The molecular structures of Co3 and Co6 highlight the different degrees of steric protection given to the metal center by the particular N‐aryl group combination. Depending on the aluminoxane co‐catalyst employed to activate the cobalt precatalyst, distinct variations in thermal stability and activity of the catalyst towards ethylene polymerization were exhibited. In particular with MAO, the resultant catalysts reached their optimal performance at 70 °C delivering high activities of up to 10.1 × 10⁶ g PE (mol of Co)^?1 h^?1 with Co1  >  Co4  >  Co2  >  Co5  >  Co3 >>  Co6 . On the other hand, using MMAO, the catalysts operate most effectively at 30 °C but are by comparison less productive. In general, the polyethylenes were highly linear, narrowly disperse and displayed a wide range of molecular weights [M_w range: 18.5–58.7 kg mol^?1 (MAO); 206.1–352.5 kg mol^?1 (MMAO)].     

Magnetic Properties of a Single‐Molecule Lanthanide–Transition‐Metal Compound Containing 52 Gadolinium and 56 Nickel Atoms

Monodisperse metal clusters provide a unique platform for investigating magnetic exchange within molecular magnets. Herein, the core–shell structure of the monodisperse molecule magnet of [Gd₅₂Ni₅₆(IDA)₄₈(OH)₁₅₄(H₂O)₃₈]@SiO₂ ( 1 a @SiO₂) was prepared by encapsulating one high‐nuclearity lanthanide–transition‐metal compound of [Gd₅₂Ni₅₆(IDA)₄₈(OH)₁₅₄(H₂O)₃₈]?(NO₃)₁₈?164 H₂O ( 1 ) (IDA=iminodiacetate) into one silica nanosphere through a facile one‐pot microemulsion method. 1 a @SiO₂ was characterized using transmission electron microscopy, N₂ adsorption–desorption isotherms, and inductively coupled plasma‐atomic emission spectrometry. Magnetic investigation of 1 and 1 a revealed J₁=0.25 cm^?1, J₂=?0.060 cm^?1, J₃=?0.22 cm^?1, J₄=?8.63 cm^?1, g=1.95, and z J=?2.0×10^?3 cm^?1 for 1 , and J₁=0.26 cm^?1, J₂=?0.065 cm^?1, J₃=?0.23 cm^?1, J₄=?8.40 cm^?1 g=1.99, and z J=0.000 cm^?1 for 1 a @SiO₂. The z J=0 in 1 a @SiO₂ suggests that weak antiferromagnetic coupling between the compounds is shielded by silica nanospheres.