Simultaneous synthesis of silver nanoparticles and poly(2,5‐dimethoxyaniline) in poly(styrene sulfonic acid)

Silver nanoparticles were formed in situ along with poly(2,5‐dimethoxyaniline) (PDMA) in an interconnected network matrix (reactor), comprising the electronic conductive polymer, PDMA, and a polyelectrolyte, poly(styrene sulfonic acid) (PSS), through the simultaneous reduction of Ag⁺ ions and polymerization of 2,5‐dimethoxyaniline. In situ ultraviolet‐visible spectroscopy showed that peaks corresponding to the plasmon resonance of silver nanoparticles at 411 nm and the polaronic transition of PDMA at 438 nm provided evidences for the simultaneous formation of silver nanoparticles and PDMA. Transmission electron microscopy and size distribution analysis revealed the presence of spherical silver nanoparticles with an average diameter of 12 nm in the composite. X‐ray photoelectron spectroscopy showed that the amine units in PDMA changed to imine units upon the formation of silver nanoparticles. A comprehensive mechanism for the formation of the PDMA‐PSS‐Ag nanocomposite is proposed. A 10‐fold increase in the conductivity was noticed for the PDMA–PSS–Ag nanocomposite (1 S/cm) in comparison with the PDMA–PSS composite (0.1 S/cm). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3843–3852, 2006     

Full polysaccharide chitosan‐CMC membrane and silver nanocomposite: synthesis,characterization, and antibacterial behaviors

Chitosan‐carboxymethyl cellulose (CMC) full polysaccharide membrane was prepared by cross‐linking of chitosan with CMC dialdehyde and subsequent reductive amination. CMC dialdehyde molecule was prepared by periodate oxidation of CMC and then applied as a cross‐linking agent to form a new membrane network. The properties of oxidized CMC were investigated by various methods such as Fourier transform infrared (FT‐IR) spectroscopy, ¹H NMR spectroscopy, and viscosity test. Then, novel chitosan‐CMC silver nanocomposite was prepared using chitosan‐CMC as a carrier. The structure of the chitosan‐CMC membrane and the silver nanocomposite were confirmed by FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). TEM images indicate that the chitosan‐CMC nanocomposite comprises silver nanoparticles with diameters in the range of about 5–20 nm. The antibacterial studies of the nanocomposite were also evaluated. The chitosan‐CMC silver nanocomposite demonstrates good antibacterial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. Copyright © 2016 John Wiley & Sons, Ltd.     

Cellulose/silver nanoparticles composite microspheres: eco-friendly synthesis and catalytic application

Cellulose/silver nanoparticles (Ag NPs) composites were prepared and their catalytic performance was evaluated. Porous cellulose microspheres, fabricated from NaOH/thiourea aqueous solution by a sol–gel transition processing, were served as supports for Ag NPs synthesis by an eco-friendly hydrothermal method. The regenerated cellulose microspheres were designed as reducing reagent for hydrothermal reduction and also micro-reactors for controlling growth of Ag NPs. The structure and properties of obtained composite microspheres were characterized by Optical microscopy, UV–visible spectroscopy, WXRD, SEM, TEM and TG. The results indicated that Ag NPs were integrated successfully and dispersed uniformly in the cellulose matrix. Their size (8.3–18.6?nm), size distribution (3.4–7.7?nm), and content (1.1–4.9?wt%) were tunable by tailoring of the initial concentration of AgNO₃. Moreover, the shape, integrity and thermal stability were firmly preserved for the obtained composite microspheres. The catalytic performance of the as-prepared cellulose/Ag composite microspheres was examined through a model reaction of 4-nitrophenol reduction in the presence of NaBH₄. The composites microspheres exhibited good catalytic activity, which is much high than that of hydrogel/Ag NPs composites and comparable with polymer core–shell particles loading Ag NPs.     

Green synthesis of silver nanoparticles using Thymus kotschyanus extract and evaluation of their antioxidant,antibacterial and cytotoxic effects

Present study used ecofriendly, cost efficient and easy method for synthesis of silver nanoparticles (Ag NPs) at the room temperature by Thymus Kotschyanus extract as reducing and capping agent. Various analytical technique including UV–Vis absorption spectroscopy determined presence of Ag NPs in the solution, the functional groups of Thymus Kotschyanus extract in the reduction and capping process of Ag NPs are approved by FT‐IR, crystallinity with the fcc plane approved from the X‐ray diffraction (XRD) pattern, energy dispersive spectroscopy (EDS) determined existence of elements in the sample, surface morphology, diverse shapes and size of present Ag NPs were showed by using scanning electron microscopy (SEM), atomic force microscopy (AFM) and high resolution transmission electron microscopy (HRTEM). Beginning and end destroy temperature of present silver nanoparticles were determined by thermal gravimetric spectroscopy (TGA). In addition, antibacterial, antioxidant and cytotoxicity properties of Ag NPs were studied. Agar disk and agar well diffusion are the methods to determined antibacterial properties of synthesized Ag NPs. Also MIC (Minimum Inhibitory Concentration) and MBC (Minimum Bactericidal Concentration) were recognized by macro broth dilution assay. DPPH free radical scavenging assay was used for antioxidant property and compare to butylated hydroxytoluene (BHT) as standard antioxidant that showed high antioxidant activity more than BHT. Synthesized Ag NPs have great cell viability in a dose depended manner and demonstrate that this method for synthesis silver nanoparticles provided nontoxic. The average diameter of synthesized Ag NPs was about 50–60 nm.     

Preparation and characterization of Fe3O4@SiO2/APTPOSS core–shell composite nanomagnetics as a novel family of reusable catalysts and their application in the one‐pot synthesis of 1,3‐thiazolidin‐4‐one derivatives

Octakis[3‐(3‐aminopropyltriethoxysilane)propyl]octasilsesquioxane (APTPOSS) as a polyhedral oligomeric silsesquioxane derivative was prepared and used as a pioneer reagent to obtain a novel core–shell composite using magnetic iron oxide nanoparticles as the core and the inorganic–organic hybrid polyhedral oligomeric silsesquioxane as the shell. Fe₃O₄@SiO₂/APTPOSS were confirmed using Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive spectroscopy, dynamic light scattering, thermogravimetric analysis, X‐ray diffraction and vibrating sample magnetometry. The inorganic–organic hybrid polyhedral oligomeric silsesquioxane magnetic nanoparticles were used as an efficient new heterogeneous catalyst for the one‐pot three‐component synthesis of 1,3‐thiazolidin‐4‐ones under solvent‐free conditions. Moreover, these nanoparticles could be easily separated using an external magnet and then reused several times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Green synthesis and chemical characterization of silver nanoparticles obtained using Allium saralicum aqueous extract and survey of in vitro antioxidant,cytotoxic, antibacterial and antifungal properties

Allium saralicum R.M. Fritsch has been used in Iranian traditional medicine as a remedial supplement for microbial diseases. This paper reports the green synthesis, chemical characterization and antioxidant, cytotoxic, antibacterial and antifungal properties of silver nanoparticles obtained using aqueous extract of A. saralicum leaves. In this synthesis, no surfactants or stabilizers were used. For characterization, UV–visible spectroscopy, transmission electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and field emission scanning electron microscopy were used. 2,2‐Diphenyl‐1‐picrylhydrazyl was used in experiments to assess the antioxidant potential of the silver nanoparticles, which revealed an impressive prevention in comparison with butylated hydroxytoluene. The synthesized silver nanoparticles at low doses (1–250 μg dl^?1) did not show marked cytotoxic activity (against cervical cancer cells (Hela), breast cancer cells (MCF‐7) and human embryonic kidney cells (HEK‐293)). Agar diffusion tests were applied to determine the antibacterial and antifungal characteristics. Compared with all standard antimicrobials, the silver nanoparticles showed higher antibacterial and antifungal activities (p ≤ 0.01). Also, the silver nanoparticles inhibited the growth of all bacteria and fungi at concentrations of 31–250 μg ml^?1, and destroyed them at concentrations of 31–500 μg ml^?1 (p ≤ 0.01). Because the silver nanoparticles obtained using aqueous extract of A. saralicum leaves have antioxidant, non‐cytotoxic, antifungal and antibacterial potentials, they can be used as a medical supplement or drug.     

Green synthesis of reduced graphene oxide/Fe3O4/Ag ternary nanohybrid and its application as magnetically recoverable catalyst in the reduction of 4‐nitrophenol

Materials having both magnetic and catalytic properties have shown great potential for practical applications. Here, a reduced graphene oxide/iron oxide/silver nanohybrid (rGO/Fe₃O₄/Ag NH) ternary material was prepared by green synthesis of Ag on pre‐synthesized rGO/Fe₃O₄. The as‐prepared rGO/Fe₃O₄/Ag NH was characterized using Fourier transform infrared spectroscopy, X‐ray diffractometry, Raman spectroscopy, vibrating sample magnetometry, transmission electron microscopy and energy‐dispersive X‐ray spectroscopy. rGO sheets were covered with Fe₃O₄ (8–16 nm) and Ag (18–40 nm) nanoparticles at high densities. The mass percentages were 13.47% (rGO), 62.52% (Fe₃O₄) and 24.01% (Ag). rGO/Fe₃O₄/Ag NH exhibited superparamagnetic behavior with high saturated magnetization (29 emu g⁻¹ at 12 kOe), and efficiently catalyzed the reduction of 4‐nitrophenol (4‐NP) with a rate constant of 0.37 min⁻¹, comparable to those of Ag‐based nanocatalysts. The half‐life of 4‐NP in the presence of rGO/Fe₃O₄/Ag NH was ca 1.86 min. rGO/Fe₃O₄/Ag NH could be magnetically collected and reused, and retained a high conversion efficiency of 94.4% after the fourth cycle. rGO/Fe₃O₄/Ag NH could potentially be used as a magnetically recoverable catalyst in the reduction of 4‐NP and environmental remediation.     

Ultrasonic‐assisted synthesis of supramolecular copper (II) complex a precursor for the preparation of octahedron Cu2O nanoparticles applicable in the adsorption and photodegradation of Rhodamine B

A copper (II) supramolecular coordination complex formulated as [Cu₂(μ‐ox)₂(pyz)₃]_n ( 1 ), (pyz = pyrazine and ox = oxalate) has been synthesized under ultrasound irradiation. 1 was characterized using various techniques such as elemental analyses, Fourier‐transform infrared spectroscopy (FT‐IR), ultraviolet–visible spectroscopy (UV–Vis), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and single crystal X‐ray diffraction (SC‐XRD). A detailed magnetic characterization of complex 1 has been carried by vibrating sample magnetometer (VSM). The M‐H hysteresis loop of 1 revealed a weak ferromagnetic behavior with the highest magnetization of 0.0123 emu/g at room temperature. Compound 1 was used as an inorganic precursor to prepare Cu₂O nanoparticles through thermal decomposition at 600 °C. The obtained Cu₂O has been characterized using Fourier transform infrared spectroscopy (FT‐IR), X‐ray powder diffraction (XRPD) and scanning electron microscopy (SEM). The results of SEM showed octahedron Cu₂O nanoparticles with the edge lengths from 5–80 nm. Also, the adsorption ability and the photocatalytic activity of octahedral Cu₂O nanoparticles in the removal of rhodamine B (RB) have been investigated. The results showed that the obtained octahedral Cu₂O nanoparticles are effective in adsorption and degradation of rhodamine B from contaminated water sources. The maximum adsorption capacity and degradation efficiency of Cu₂O nanoparticles were 83.3 mg/g and 91.7%, respectively. It was also found that in comparison with the commercial Cu₂O, our fabricated Cu₂O nanoparticles exhibit higher catalytic activity.     

Fabrication of carboxymethylated cellulose fibers supporting Ag NPs@MOF‐199s nanocatalysts for catalytic reduction of 4‐nitrophenol

In this work, we prepared high‐performance and recyclable nanocatalysts that consist of small and well‐dispersed silver nanoparticles (Ag NPs) immobilized onto Cu‐ based metal–organic framework (MOF‐199 s) supported by carboxymethylated cellulose fibers (CCFs). The as‐prepared green nanohybrid catalysts, namely Ag NPs@ MOF‐199 s/CCFs, were characterized using SEM, TEM, XRD and FT‐IR techniques. The catalytic performances showed that Ag NPs@ MOF‐199 s/CCFs catalysts exhibited a very high catalytic efficiency towards the reduction of 4‐nitrophenol to 4‐aminophenol. The enhanced catalytic performances are attributed to the improved dispersity, small particles of Ag NPs stabilized by the MOF‐199 s, and the porous catalyst structures. The introduction of cellulose fiber further facilitates the reuse and sustainability of the nanohybrid catalysts, showing a stable and high reusability (more than 91% of catalytic activity) even after five runs.     

Sulfamic acid immobilized on amino‐functionalized magnetic nanoparticles: A new and active magnetically recoverable catalyst for the synthesis of N‐heterocyclic compounds

Sulfamic acid immobilized on amino‐functionalized magnetic nanoparticles (MNPs/DETA‐SA) was successfully fabricated and characterized using various techniques. Diameters of approximately 15 nm for the MNPs/DETA‐SA were observed from scanning electron microscopy images. The as‐fabricated nanocomposite was applied as an efficient and magnetically reusable catalyst for the synthesis of 2,3‐dihydroquinazoline‐4(1H)‐one and polyhydroquinoline derivatives. All products were obtained in good to excellent yields. Recovery tests confirm that the catalyst can be readily recovered using an external magnet and reused many times without significant loss of its catalytic activity.     

Synthesis and Characterization of Copolymercore-Silvershell Composite Microspheres

Composite microspheres composed of monodispersed poly（St-co-MAA） latices with diameter about 260 nm as core and Ag nanocrystals as shell were prepared by an in situ reduction method. The shell thickness could be controlled in the range of 15--45 nm by this coating process. The structure and the composition of the core-shell microspheres were characterized by transmission electron microscopy （TEM）, X-ray diffractometry （XRD）, X-ray photoelectron spectroscopy （XPS）, and thermogravimetric analysis （TG）. The formation of the composite microspheres is explained by the nucleation of silver on the surface of the latices followed by growth of the silver shell.     

Selective and sensitive determination of silver ions at trace levels based on ultrasonic‐assisted dispersive solid‐phase extraction using ion‐imprinted polymer nanoparticles

We describe ultrasonic‐assisted dispersive solid‐phase extraction based on ion‐imprinted polymer (UA‐DSPE‐IIP) nanoparticles for the selective extraction of silver ions. Ultrasound is a good and robust method to facilitate the extraction of target ions in the sorption step and elution of the target ions in the desorption step. The IIP nanoparticles used in the UA‐DSPE‐IIP were prepared by precipitation polymerization. To prepare the IIP nanoparticles, 2‐vinylpyridine, ethylene glycol dimethacrylate, 2,2′‐azobisisobutyronitrile, 2‐picolinic acid, silver and chloroform–methanol (50:50) solution were used as functional monomer, cross‐linker, initiator, silver‐binding ligand, template ion and porogen, respectively. The IIP nanoparticles were characterized using Fourier transformed infrared spectroscopy, thermogravimetric and differential thermal analysis, X‐ray diffraction and scanning electron microscopy. A Box–Behnken design was used for optimization of sorption and desorption steps in UA‐DSPE‐IIP. In the sorption step: pH of solution, IIP amount (mg), sonication time for sorption (min); in the desorption step: concentration of eluent (mol l⁻¹), volume of eluent (ml), sonication time (min) for desorption were investigated and optimized by Box–Behnken design. The optimum conditions for the method were: pH of solution, 7; sonication time for sorption, 7 min; IIP amount, 17 mg; type and concentration of eluent, HCl 1.5 mol l⁻¹; volume of eluent, 2 ml; sonication time for desorption, 140 s. Under the optimized conditions the limit of detection and relative standard deviation for the detection of silver ions using UA‐DSPE‐IIP were found to be 0.09 μg l⁻¹ and <3%, respectively.     

Preparation of high-stable silver nanoparticle dispersion by using sodium alginate as a stabilizer under gamma radiation

Highly stable silver nanoparticles were successfully synthesized by gamma ray irradiation in the presence of sodium alginate. The silver nanoparticles were characterized by UV–vis spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). Their particle sizes were in the range of 6–30 nm. The as-obtained Ag nanoparticle dispersion was stable for over 6 months at room temperature.     

Synthesis of Fe3O4@SiO2@DOPisatin‐Ni(II) and Cu(II) nanoparticles: Highly efficient catalyst for the synthesis of sulfoxides and disulfides

The catalytic activity of two magnetic catalysts Fe₃O₄@SiO₂@DOPisatin‐M(II) (M = Ni, Cu) was investigated in the environmentally green H₂O₂ oxidant‐based oxidation of sulfides to sulfoxides and oxidative coupling of thiols to disulfides. By using these catalysts, various substrates were successfully converted into their corresponding product. These catalysts could also be reused multiple time without significant loss of activity. The physical and chemical properties of the catalysts were determined using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), energy dispersive X‐ray spectroscopy (EDX) and atomic absorption spectroscopy (AAS).     

Waste Banana Stem Utilized for Biosynthesis of Silver and Gold Nanoparticles and Their Antibacterial and Catalytic Properties

The present work presented a synthesis of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) using the aqueous extract of waste banana stem (WBS), Musa paradisiaca Linn. The reduction and formation of MNPs have been characterized by several analysis techniques such as X-ray diffraction (XRD), Fourier transmission infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM). The techniques showed that average particle size of WBS-AgNPs and WBS-AuNPs in crystalline nature was in ranges of 7–13 nm and 11–14 nm, respectively. The synthesized nanoparticles were used to evaluate antibacterial activity and catalysis. The WBS-AgNPs showed strong antibacterial activity against B. subtilis and E. coli. The largest zone of inhibition against B. subtilis (14.2 mm) and E. coli (9.3 mm) was found at concentrations of 4.0 ppm and 2.0 ppm, respectively. The excellent catalytic application of both the nanoparticles for the reduction of 4-nitrophenol was confirmed via study on their kinetics. The normalized kinetic constants (k_nor) of WBS-AgNPs and WBS-AuNPs were found to be 1.72?×?10^–3 s^?1 mg^?1 and 2.45?×?10^–3 s^?1 mg^?1, respectively.

     

Doping of processable conducting poly(m‐aminophenol) with silver nanoparticles

Processable poly(m‐aminophenol) (PmAP) was synthesized using ammonium persulfate (APS) oxidant in 0.6 M sodium hydroxide solution at room temperature. Soluble silver hydroxide ammonium complex was formed by dissolving silver nitrate in excess liquor ammonia and the thermal decomposition of this complex easily produced silver nanoparticle. Then, in situ silver nanoparticle‐doped PmAP film was obtained by casting PmAP film from dimethyl sulfoxide (DMSO) with silver hydroxide ammonia complex mixture at 140°C. The nanocomposite was characterized by ultraviolet‐visible spectroscopy, Fourier transformed spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy, electron dispersion spectroscopy, thermogravimetric analysis, and X‐ray diffraction analysis. The average size of the nanoparticle was around 130–140 nm as confirmed by the TEM analysis. Synthesized PmAP silver nanocomposite showed the highest DC‐conductivity of 1.03 × 10^?6 S/cm. From the above characterizations, it can be said that silver nanoparticle shows some doping effect on the conductivity of PmAP. The doping level of the silver nanoparticle inside the polymer was optimized in terms of DC‐conductivity of the silver nanoparticle‐doped PmAP film. Copyright © 2009 John Wiley & Sons, Ltd.     

Green synthesis and characterization of silver nanoparticles by Allium cepa L. to produce silver nano‐coated fabric and their antimicrobial evaluation

This research work was proposed to study the antimicrobial activity of the silver nanocoated fabric with the purpose of producing good dressing and clothing material. We synthesized simple, ecofriendly, cost‐effective and sustainable silver nanoparticles by using the aqueous extract of Allium cepa L. Here, A. cepa L. acts as a good reducing and capping agent that produced stable silver nanoparticles having particle size of range 36 ± 1 to 98 ± 2 nm, Poly dispersiblity index 0.234 ± 0.61 to 1.023 ± 0.33 and Zeta potential ‐12 ± 1.5 mV to ‐26 ± 1.2 mV. The effect of temperature and extract volume used was considered for optimization of synthetic procedure. The nanocoated fabric was characterized for morphological study, size (using transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE‐SEM) and zeta‐potential (Zeta Potentiometer). The presence of functional groups were observed by using attenuated total reflection‐Fourier transform infrared (ATR‐FTIR) and Raman spectroscopy. The crystallinity and structural property of the synthesized silver nanoparticles were studied in terms of Powder X‐ray diffraction (PXRD). An IC₅₀ value and zone of inhibition was studied which demonstrate that the silver nanocoated fabric have an excellent antibacterial property against Gram‐negative (Escherichia coli) and Gram‐positive (Staphylococcus aureus) bacteria. Further nanocoated fabric material was washed (with function of time 0, 10, 25, and 50 laundry cycles) and still retained their anti‐bacterial activity towards both strain. Initially there was 52 μg/ml of silver nanoparticles on the cotton fabric but after 50 laundry cycle in 500 ml of distilled water the fabric showed 92% efficiency against gram positive and 90% efficacy toward gram negative bacteria. It was found that 4.16 μg/ml nano particles leached in case of S. Aureus and 5.2 μg/mL silver nanoparticles leached in case of E. coli. Nanocoated fabric material synthesized using green synthesis was found to be economical with good resistance to washing.     

Catalytic reduction of 4‐nitrophenol using silver nanoparticles‐engineered poly(N‐isopropylacrylamide‐co‐acrylamide) hybrid microgels

Nearly monodisperse poly(N ‐isopropylacrylamide‐co ‐acrylamide) [P(NIPAM‐co‐AAm)] microgels were synthesized using precipitation polymerization in aqueous medium. These microgels were used as microreactors to fabricate silver nanoparticles by chemical reduction of silver ions inside the polymer network. The pure and hybrid microgels were characterized using Fourier transform infrared and UV–visible spectroscopies, dynamic light scattering, X‐ray diffraction, thermogravimetric analysis, differential scanning calorimetry and transmission electron microscopy. Results revealed that spherical silver nanoparticles having diameter of 10–20 nm were successfully fabricated in the poly(N ‐isopropylacrylamide‐co ‐acrylamide) microgels with hydrodynamic diameter of 250 ± 50 nm. The uniformly loaded silver nanoparticles were found to be stable for long time due to donor–acceptor interaction between amide groups of polymer network and silver nanoparticles. Catalytic activity of the hybrid system was tested by choosing the catalytic reduction of 4‐nitrophenol as a model reaction under various conditions of catalyst dose and concentration of NaBH₄ at room temperature in aqueous medium to explore the catalytic process. The progress of the reaction was monitored using UV–visible spectrophotometry. The pseudo first‐order kinetic model was employed to evaluate the apparent rate constant of the reaction. It was found that the apparent rate constant increased with increasing catalyst dose due to an increase of surface area as a result of an increase in the number of nanoparticles.     

Electrochemical synthesis of copper-arabinoxylan nanocomposite for applications as antimicrobial agent and CO2 conversion catalyst

This study reports the electrochemical synthesis, antimicrobial and catalytic activity of copper-arabinoxylan nanocomposite. The synthesis was achieved without use of any hazardous reducing and stabilizing agent. The spherical copper nanoparticles (size approx. 40 nm) dispersed in the arabinoxylan matrix as they formed and got stabilized. In the absence of arabinoxylan the particles rapidly converted to copper oxide suggesting a high stability for the composite. Electrolysis was carried out with copper plate as the sacrificial anode, carbon rod as the cathode and sodium nitrate (1.00 % in 1 % arabinoxylan suspension) as an electrolyte. The copper nanoparticles dispersed in arabinoxylan were characterized by surface plasmon resonance spectroscopy, X-ray diffraction, electron microscopy and zeta potential measurements. The synthesized composite exhibited good antimicrobial activity against P. aeruginosa, Staph. aureus and E. coli and a catalytic activity in conversion of CO₂ to methanol.     

Preparation of BiVO4/MIL‐125(Ti) composite with enhanced visible‐light photocatalytic activity for dye degradation

Because of their desired features, including very specific surface areas and designable framework architecture together with their possibility to be functionalized, Metal Framework (MOF) is a promising platform for supporting varied materials in respect of catalytic applications in water treatment. In this work, a novel visible‐light‐responsive photocatalyst that comprised BiVO₄ together with MIL‐125(Ti), was synthesized by a two‐step hydrothermal approach. The characterization of as‐obtained samples as performed by X‐ray diffraction, scanning electron microscopy, high resolution transmission electron microscopy, Fourier transform infrared spectroscope, X‐ray photoelectron spectroscopy and ultraviolet‐visible diffuse reflection spectra. Rhodamine B was selected being a target for the evaluation of the photocatalytic function of as‐developed photocatalyst. The photocatalytic reaction parameters, for example, the content of BiVO₄ as well as initial concentration of Rhodamine B was researched. The composite photocatalyst possessing Bi:Ti molar ratio of 3:2 brought to light the fact that the greatest photocatalytic activity had the ability to degrade 92% of Rhodamine B in 180 min. In addition to that, the BiVO₄/MIL‐125(Ti) composite could keep its photocatalytic activity during the recycling test. The phenomenon of disintegration of the photo‐generated charges in the BiVO₄/MIL‐125(Ti) composite was brought to discussion as well.