Fine‐Tuning of Lewis Acidity: The Case of Borenium Hydride Complexes Derived from Bis(phosphinimino)amide Boron Precursors

Reactions of bis(phosphinimino)amines LH and L′H with Me₂S ? BH₂Cl afforded chloroborane complexes LBHCl ( 1 ) and L′BHCl ( 2 ), and the reaction of L′H with BH₃ ? Me₂S gave a dihydridoborane complex L′BH₂ ( 3 ) (LH=[{(2,4,6‐Me₃C₆H₂N)P(Ph₂)}₂N]H and L′H=[{(2,6‐iPr₂C₆H₃N)P(Ph₂)}₂N]H). Furthermore, abstraction of a hydride ion from L′BH₂ ( 3 ) and LBH₂ ( 4 ) mediated by Lewis acid B(C₆F₅)₃ or the weakly coordinating ion pair [Ph₃C][B(C₆F₅)₄] smoothly yielded a series of borenium hydride cations: [L′BH]⁺[HB(C₆F₅)₃]^? ( 5 ), [L′BH]⁺[B(C₆F₅)₄]^? ( 6 ), [LBH]⁺[HB(C₆F₅)₃]^? ( 7 ), and [LBH]⁺[B(C₆F₅)₄]^? ( 8 ). Synthesis of a chloroborenium species [LBCl]⁺[BCl₄]^? ( 9 ) without involvement of a weakly coordinating anion was also demonstrated from a reaction of LBH₂ ( 4 ) with three equivalents of BCl₃. It is clear from this study that the sterically bulky strong donor bis(phosphinimino)amide ligand plays a crucial role in facilitating the synthesis and stabilization of these three‐coordinated cationic species of boron. Therefore, the present synthetic approach is not dependent on the requirement of weakly coordinating anions; even simple BCl₄^? can act as a counteranion with borenium cations. The high Lewis acidity of the boron atom in complex 8 enables the formation of an adduct with 4‐dimethylaminopyridine (DMAP), [LBH ? (DMAP)]⁺[B(C₆F₅)₄]^? ( 10 ). The solid‐state structures of complexes 1 , 5 , and 9 were investigated by means of single‐crystal X‐ray structural analysis.     

Silylium dual catalysis in living polymerization of methacrylates via In situ hydrosilylation of monomer

Silylium ions (“R₃Si⁺”) are found to catalyze both 1,4‐hydrosilylation of methyl methacrylate (MMA) with R₃SiH to generate the silyl ketene acetal initiator in situ and subsequent living polymerization of MMA. The living characteristics of the MMA polymerization initiated by R₃SiH (Et₃SiH or Me₂PhSiH) and catalyzed by [Et₃Si(L)]⁺[B(C₆F₅)₄]^– (L = toluene), which have been revealed by four sets of experiments, enabled the synthesis of the polymers with well‐controlled M_n values (identical or nearly identical to the calculated ones), narrow molecular weight distributions (? = 1.05–1.09), and well defined chain structures {H? [MMA]_n? H}. The polymerization is highly efficient too, with quantitative or near quantitative initiation efficiencies (I* = 96–100%). Monitoring of the reaction of MMA + Me₂PhSiH + [Et₃Si(L)]⁺[B(C₆F₅)₄]^– (0.5 mol%) by ¹H NMR provided clear evidence for in situ generation of the corresponding SKA, Me₂C?C(OMe)OSiMe₂Ph, via the proposed “Et₃Si^+”‐catalyzed 1,4‐hydrosilylation of monomer through “frustrated Lewis pair” type activation of the hydrosilane in the form of the isolable silylium‐silane complex, [Et₃Si? H? SiR₃]⁺[B(C₆F₅)₄]^–. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1895–1903     

Isolation and Structure of Germylene‐Germyliumylidenes Stabilized by N‐Heterocyclic Imines

The ditopic germanium complex FGe(NIPr)₂Ge[BF₄] ( 3 [BF₄]; IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene) is prepared by the reaction of the amino(imino)germylene (Me₃Si)₂NGeNIPr ( 1 ) with BF₃?OEt₂. This monocation is converted into the germylene‐germyliumylidene 3 [BAr^F₄] [Ar^F=3,5‐(CF₃)₂‐C₆H₃] by treatment with Na[BAr^F₄]. The tetrafluoroborate salt 3 [BF₄] reacts with 2 equivalents of Me₃SiOTf to give the novel complex (OTf)(GeNIPr)₂[OTf] ( 4 [OTf]), which affords 4 [BAr^F₄] and 4 [Al(OR^F)₄] [R^F=C(CF₃)₃] after anion exchange with Na[BAr^F₄] or Ag[Al(OR^F)₄], respectively. The computational, as well as crystallographic study, reveals that 4 ⁺ has significant bis(germyliumylidene) dication character.     

Univalent Gallium Complexes of Simple and ansa‐Arene Ligands: Effects on the Polymerization of Isobutylene

Using [Ga(C₆H₅F)₂]⁺[Al(OR^F)₄]^?( 1 ) (R^F=C(CF₃)₃) as starting material, we isolated bis‐ and tris‐η⁶‐coordinated gallium(I) arene complex salts of p‐xylene (1,4‐Me₂C₆H₄), hexamethylbenzene (C₆Me₆), diphenylethane (PhC₂H₄Ph), and m‐terphenyl (1,3‐Ph₂C₆H₄): [Ga(1,4‐Me₂C₆H₄)_2.5]⁺ ( 2⁺ ), [Ga(C₆Me₆)₂]⁺ ( 3⁺ ), [Ga(PhC₂H₄Ph)]⁺ ( 4⁺ ) and [(C₆H₅F)Ga(μ‐1,3‐Ph₂C₆H₄)₂Ga(C₆H₅F)]²⁺ ( 5²⁺ ). 4⁺ is the first structurally characterized ansa‐like bent sandwich chelate of univalent gallium and 5²⁺ the first binuclear gallium(I) complex without a Ga?Ga bond. Beyond confirming the structural findings by multinuclear NMR spectroscopic investigations and density functional calculations (RI‐BP86/SV(P) level), [Ga(PhC₂H₄Ph)]⁺[Al(OR^F)₄]^?( 4 ) and [(C₆H₅F)Ga(μ‐1,3‐Ph₂C₆H₄)₂Ga(C₆H₅F)]²⁺{[Al(OR^F)₄] ^?}₂ ( 5 ), featuring ansa‐arene ligands, were tested as catalysts for the synthesis of highly reactive polyisobutylene (HR‐PIB). In comparison to the recently published 1 and the [Ga(1,3,5‐Me₃C₆H₃)₂]⁺[Al(OR^F)₄]^? salt ( 6 ) (1,3,5‐Me₃C₆H₃=mesitylene), 4 and 5 gave slightly reduced reactivities. This allowed for favorably increased polymerization temperatures of up to +15 °C, while yielding HR‐PIB with high contents of terminal olefinic double bonds (α‐contents=84–93 %), low molecular weights (M_n=1000–3000 g mol^?1) and good monomer conversions (up to 83 % in two hours). While the chelate complexes delivered more favorable results than 1 and 6 , the reaction kinetics resembled and thus concurred with the recently proposed coordinative polymerization mechanism.     

Methylaluminoxane‐free ethylene polymerization with in situ activated zirconocene triisobutylaluminum catalysts and silica‐supported stabilized borate cocatalysts

Heterogenization of tris(pentafluorophenyl)borane [B(C₆F₅)₃] on a silica support stabilized with chlorotriphenylmethane (CICPh₃) and N,N‐dimethylaniline (HNMe₂Ph) creates the following supported borane cocatalysts: [HNMe₂Ph]⁺[B(C₆F₅)₃‐SiO₂]^? and [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^?. These supported catalysts were reacted with Cp₂ZrCl₂ TIBA in situ to generate active metallocene species in the reactor. Triisobutylaluminum (TIBA) was a good coactivator for dichloro‐zirconocene, acting as the prealkylating agent to generate cationic zirconocene (Cp₂ZrC₄H₉⁺). The catalytic performances were determined from the kinetics of ethylene‐consumption profiles that were independent of the time dedicated to the activation of the catalysts. The scanning electron microscopy‐energy dispersive X‐ray measurements showed that B(C₆F₅)₃ dispersed uniformly on the silica support. Under our reaction conditions, the [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? system had higher productivity and weight‐average molecular weight than the [HNMe₂Ph]⁺[B(C₆F₅)₃‐SiO₂]^? system. For the [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? system, the productivity increased with the amount catalyst; however, the polydispersity index of polyethylene synthesized did not change. The final shape of polymer particles was a larger‐diameter version of the original support particle. The polymer particles synthesized with supported [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? catalysts had larger diameters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3240–3248, 2002     

Cationic Allyl Complexes of the Rare‐Earth Metals: Synthesis,Structural Characterization,and 1,3‐Butadiene Polymerization Catalysis

Monocationic bis‐allyl complexes [Ln(η³‐C₃H₅)₂(thf)₃]⁺[B(C₆X₅)₄]^? (Ln=Y, La, Nd; X=H, F) and dicationic mono‐allyl complexes of yttrium and the early lanthanides [Ln(η³‐C₃H₅)(thf)₆]²⁺[BPh₄]₂^? (Ln=La, Nd) were prepared by protonolysis of the tris‐allyl complexes [Ln(η³‐C₃H₅)₃(diox)] (Ln=Y, La, Ce, Pr, Nd, Sm; diox=1,4‐dioxane) isolated as a 1,4‐dioxane‐bridged dimer (Ln=Ce) or THF adducts [Ln(η³‐C₃H₅)₃(thf)₂] (Ln=Ce, Pr). Allyl abstraction from the neutral tris‐allyl complex by a Lewis acid, ER₃ (Al(CH₂SiMe₃)₃, BPh₃) gave the ion pair [Ln(η³‐C₃H₅)₂(thf)₃]⁺[ER₃(η¹‐CH₂CH?CH₂)]^? (Ln=Y, La; ER₃=Al(CH₂SiMe₃)₃, BPh₃). Benzophenone inserts into the La? C_allyl bond of [La(η³‐C₃H₅)₂(thf)₃]⁺[BPh₄]^? to form the alkoxy complex [La{OCPh₂(CH₂CH?CH₂)}₂(thf)₃]⁺[BPh₄]^?. The monocationic half‐sandwich complexes [Ln(η⁵‐C₅Me₄SiMe₃)(η³‐C₃H₅)(thf)₂]⁺[B(C₆X₅)₄]^? (Ln=Y, La; X=H, F) were synthesized from the neutral precursors [Ln(η⁵‐C₅Me₄SiMe₃)(η³‐C₃H₅)₂(thf)] by protonolysis. For 1,3‐butadiene polymerization catalysis, the yttrium‐based systems were more active than the corresponding lanthanum or neodymium homologues, giving polybutadiene with approximately 90 % 1,4‐cis stereoselectivity.     

Synthesis,Structure, and Reactivity of Diazene Adducts: Isolation of iso‐Diazene Stabilized as a Borane Adduct

This work describes the synthesis and full characterization of a series of GaCl₃ and B(C₆F₅)₃ adducts of diazenes R¹?N?N?R² (R¹=R²=Me₃Si, Ph; R¹=Me₃Si, R²=Ph). Trans‐Ph?N?N?Ph forms a stable adduct with GaCl₃, whereas no adduct, but instead a frustrated Lewis acid–base pair is formed with B(C₆F₅)₃. The cis‐Ph?N?N?Ph ? B(C₆F₅)₃ adduct could only be isolated when UV light was used, which triggers the isomerization from trans‐ to cis‐Ph?N?N?Ph, which provides more space for the bulky borane. Treatment of trans‐Ph?N?N?SiMe₃ with GaCl₃ led to the expected trans‐Ph?N?N?SiMe₃ ? GaCl₃ adduct but the reaction with B(C₆F₅)₃ triggered a 1,2‐Me₃Si shift, which resulted in the formation of a highly labile iso‐diazene, Me₃Si(Ph)N?N; stabilized as a B(C₆F₅)₃ adduct. Trans‐Me₃Si?N?N?SiMe₃ forms a labile cis‐Me₃Si?N?N?SiMe₃ ? B(C₆F₅)₃ adduct, which isomerizes to give the transient iso‐diazene species (Me₃Si)₂N?N ? B(C₆F₅)₃ upon heating. Both iso‐diazene species insert easily into one B?C bond of B(C₆F₅)₃ to afford hydrazinoboranes. All new compounds were fully characterized by means of X‐ray crystallography, vibrational spectroscopy, CHN analysis, and NMR spectroscopy. All compounds were further investigated by DFT and the bonding situation was assessed by natural bond orbital (NBO) analysis.     

Cyanidosilicates—Synthesis and Structure

Starting from fluoridosilicate precursors in neat cyanotrimethylsilane, Me₃Si?CN, a series of different ammonium salts [R₃NMe]⁺ (R=Et, ⁿPr, ⁿBu) with the novel [SiF(CN)₅]^2? and [Si(CN)₆]^2? dianions was synthesized in facile, temperature controlled F^?/CN^? exchange reactions. Utilizing decomposable, non‐innocent cations, such as [R₃NH]⁺, it was possible to generate metal salts of the type M₂[Si(CN)₆] (M⁺=Li⁺, K⁺) via neutralization reactions with the corresponding metal hydroxides. The ionic liquid [BMIm]₂[Si(CN)₆] (m.p.=72 °C, BMIm=1‐butyl‐3‐methylimidazolium) was obtained by a salt metathesis reaction. All the synthesized salts could be isolated in good yields and were fully characterized.     

Aluminum(III) Cations [(NHC) ⋅ AlMes2]+: Synthesis,Characterization, and Application in FLP-Chemistry

The three-coordinate aluminum cations ligated by N-heterocyclic carbenes (NHCs) [(NHC) ⋅ AlMes₂]⁺[B(C₆F₅)₄]⁻ (NHC=IMe^Me 4 , IiPr^Me 5 , IiPr 6 , Mes=2,4,6-trimethylphenyl) were prepared via hydride abstraction of the alanes (NHC) ⋅ AlHMes₂ (NHC=IMe^Me 1 , IiPr^Me 2 , IiPr 3 ) using [Ph₃C]⁺[B(C₆F₅)₄]⁻ in toluene as hydride acceptor. If this reaction was performed in diethyl ether, the corresponding four-coordinate aluminum etherate cations [(NHC) ⋅ AlMes₂(OEt₂)]⁺ [B(C₆F₅)₄]⁻ 7 – 9 (NHC=IMe^Me 7 , IiPr^Me 8 , IiPr 9 ) were isolated. According to a theoretical and experimental assessment of the Lewis-acidity of the [(IMe^Me) ⋅ AlMes₂]⁺ cation is the acidity larger than that of B(C₆F₅)₃ and of similar magnitude as reported for Al(C₆F₅)₃. The reaction of [(IMe^Me) ⋅ AlMes₂]⁺[B(C₆F₅)₄]⁻ 4 with the sterically less demanding, basic phosphine PMe₃ afforded a mixed NHC/phosphine stabilized cation [(IMe^Me) ⋅ AlMes₂(PMe₃)]⁺[B(C₆F₅)₄]⁻ 10 . Equimolar mixtures of 4 and the sterically more demanding PCy₃ gave a frustrated Lewis-pair (FLP), i.e., [(IMe^Me) ⋅ AlMes₂]⁺[B(C₆F₅)₄]⁻/PCy₃ FLP-11 , which reacts with small molecules such as CO₂, ethene, and 2-butyne.     

On Silylated Oxonium and Sulfonium Ions and Their Interaction with Weakly Coordinating Borate Anions

Attempts have been made to prepare salts with the labile tris(trimethylsilyl)chalconium ions, [(Me₃Si)₃E]⁺ (E=O, S), by reacting [Me₃Si-H-SiMe₃][B(C₆F₅)₄] and Me₃Si[CB] (CB⁻=carborate=[CHB₁₁H₅Cl₆]⁻, [CHB₁₁Cl₁₁]⁻) with Me₃Si-E-SiMe₃. In the reaction of Me₃Si-O-SiMe₃ with [Me₃Si-H-SiMe₃][B(C₆F₅)₄], a ligand exchange was observed in the [Me₃Si-H-SiMe₃]⁺ cation leading to the surprising formation of the persilylated [(Me₃Si)₂(Me₂(H)Si)O]⁺ oxonium ion in a formal [Me₂(H)Si]⁺ instead of the desired [Me₃Si]⁺ transfer reaction. In contrast, the expected homoleptic persilylated [(Me₃Si)₃S]⁺ ion was formed and isolated as [B(C₆F₅)₄]⁻ and [CB]⁻ salt, when Me₃Si-S-SiMe₃ was treated with either [Me₃Si-H-SiMe₃][B(C₆F₅)₄] or Me₃Si[CB]. However, the addition of Me₃Si[CB] to Me₃Si-O-SiMe₃ unexpectedly led to the release of Me₄Si with simultaneous formation of a cyclic dioxonium dication of the type [Me₃Si-μO-SiMe₂]₂[CB]₂ in an anion-mediated reaction. DFT studies on structure, bonding and thermodynamics of the [(Me₃Si)₃E]⁺ and [(Me₃Si)₂(Me₂(H)Si)E]⁺ ion formation are presented as well as mechanistic investigations on the template-driven transformation of the [(Me₃Si)₃E]⁺ ion into a cyclic dichalconium dication [Me₃Si-μE-SiMe₂]₂²⁺.     

Dihydrogen Catalysis of the Reversible Formation and Cleavage of CH and NH Bonds of Aminopyridinate Ligands Bound to (η5‐C5Me5)IrIII

This study focuses on a series of cationic complexes of iridium that contain aminopyridinate (Ap) ligands bound to an (η⁵‐C₅Me₅)Ir^III fragment. The new complexes have the chemical composition [Ir(Ap)(η⁵‐C₅Me₅)]⁺, exist in the form of two isomers ( 1⁺ and 2⁺ ) and were isolated as salts of the BAr_F^? anion (BAr_F=B[3,5‐(CF₃)₂C₆H₃]₄). Four Ap ligands that differ in the nature of their bulky aryl substituents at the amido nitrogen atom and pyridinic ring were employed. In the presence of H₂, the electrophilicity of the Ir^III centre of these complexes allows for a reversible prototropic rearrangement that changes the nature and coordination mode of the aminopyridinate ligand between the well‐known κ²‐N,N′‐bidentate binding in 1⁺ and the unprecedented κ‐N,η³‐pseudo‐allyl‐coordination mode in isomers 2⁺ through activation of a benzylic C?H bond and formal proton transfer to the amido nitrogen atom. Experimental and computational studies evidence that the overall rearrangement, which entails reversible formation and cleavage of H?H, C?H and N?H bonds, is catalysed by dihydrogen under homogeneous conditions.     

Synthesis of Five‐ and Six‐Coordinate Tris(pentafluoroethyl)fluorosilicates

The research area of perfluoroalkylsilanes is still in its infancy. Although there are already many examples of difluorotriorganylsilicates, the first example of a completely characterized trifluorotriorganylsilicate is presented, the dianion [Si(C₂F₅)₃F₃]^2?. The strongly electron‐withdrawing influence of the pentafluoroethyl groups appears to be a fundamental cause of the stability of this compound. This dianion is also the first structurally characterized example of a tris(pentafluoroethyl)silicon compound. The synthesis and complete characterization of [PPh₄]₂[Si(C₂F₅)₃F₃] and [PPh₄][Si(C₂F₅)₃F₂] along with the precursor [H(OEt₂)₂][Si(C₂F₅)₃F₂] was achieved from SiCl₄ and LiC₂F₅.     

Trapping a Silicon(I) Radical with Carbenes: A Cationic cAAC–Silicon(I) Radical and an NHC–Parent‐Silyliumylidene Cation

The trapping of a silicon(I) radical with N‐heterocyclic carbenes is described. The reaction of the cyclic (alkyl)(amino) carbene [cAAC_Me] (cAAC_Me=:C(CMe₂)₂(CH₂)NAr, Ar=2,6‐i Pr₂C₆H₃) with H₂SiI₂ in a 3:1 molar ratio in DME afforded a mixture of the separated ion pair [(cAAC_Me)₂Si:^.]⁺I⁻ ( 1 ), which features a cationic cAAC–silicon(I) radical, and [cAAC_Me−H]⁺I⁻. In addition, the reaction of the NHC–iodosilicon(I) dimer [I_Ar(I)Si:]₂ (I_Ar=:C{N(Ar)CH}₂) with 4 equiv of I_Me (:C{N(Me)CMe}₂), which proceeded through the formation of a silicon(I) radical intermediate, afforded [(I_Me)₂SiH]⁺I⁻ ( 2 ) comprising the first NHC–parent‐silyliumylidene cation. Its further reaction with fluorobenzene afforded the C_Ar−H bond activation product [1‐F‐2‐I_Me‐C₆H₄]⁺I⁻ ( 3 ). The isolation of 2 and 3 confirmed the reaction mechanism for the formation of 1 . Compounds 1 – 3 were analyzed by EPR and NMR spectroscopy, DFT calculations, and X‐ray crystallography.     

Homo‐ and Heterodinuclear Ir and Rh Imine‐functionalized Protic NHC Complexes: Synthetic,Structural Studies,and Tautomerization/Metallotropism Insights

The influence of the potentially chelating imino group of imine‐functionalized Ir and Rh imidazole complexes on the formation of functionalized protic N‐heterocyclic carbene (pNHC) complexes by tautomerization/metallotropism sequences was investigated. Chloride abstraction in [Ir(cod)Cl{C₃H₃N₂(DippN=CMe)‐κN3}] ( 1 a ) (cod=1,5‐cyclooctadiene, Dipp=2,6‐diisopropylphenyl) with TlPF₆ gave [Ir(cod){C₃H₃N₂(DippN=CMe)‐κ²(C2,N_imine)}]⁺[PF₆]^? ( 3 a ⁺[PF₆]^?). Plausible mechanisms for the tautomerization of complex 1 a to 3 a ⁺[PF₆]^? involving C2?H bond activation either in 1 a or in [Ir(cod){C₃H₃N₂(DippN=CMe)‐κN3}₂]⁺[PF₆]^? ( 6 a ⁺[PF₆]^?) were postulated. Addition of PR₃ to complex 3 a ⁺[PF₆]^? afforded the eighteen‐valence‐electron complexes [Ir(cod)(PR₃){C₃H₃N₂(DippN=CMe)‐κ²(C2,N_imine)}]⁺[PF₆]^? ( 7 a ⁺[PF₆]^? (R=Ph) and 7 b ⁺[PF₆]^? (R=Me)). In contrast to Ir, chloride abstraction from [Rh(cod)Cl{C₃H₃N₂(DippN=CMe)‐κN3}] ( 1 b ) at room temperature afforded [Rh(cod){C₃H₃N₂(DippN=CMe)‐κN3}₂]⁺[PF₆]^? ( 6 b ⁺[PF₆]^?) and [Rh(cod){C₃H₃N₂(DippN=CMe)‐κ²(C2,N_imine)}]⁺[PF₆]^? ( 3 b ⁺[PF₆]^?) (minor); the reaction yielded exclusively the latter product in toluene at 110 °C. Double metallation of the azole ring (at both the C2 and the N3 atom) was also achieved: [Ir₂(cod)₂Cl{μ‐C₃H₂N₂(DippN=CMe)‐κ²(C2,N_imine),κN3}] ( 10 ) and the heterodinuclear complex [IrRh(cod)₂Cl{μ‐C₃H₂N₂(DippN=CMe)‐κ²(C2,N_imine),κN3}] ( 12 ) were fully characterized. The structures of complexes 1 b , 3 b ⁺[PF₆]^?, 6 a ⁺[PF₆]^?, 7 a ⁺[PF₆]^?, [Ir(cod){C₃HN₂(DippN=CMe)(DippN=CH)(Me)‐κ²(N3,N_imine)}]⁺[PF₆]^? ( 9 ⁺[PF₆]^?), 10? Et₂O ? toluene, [Ir₂(CO)₄Cl{μ‐C₃H₂N₂(DippN=CMe)‐κ²(C2,N_imine),κN3}] ( 11 ), and 12? 2 THF were determined by X‐ray diffraction.     

Titanium and Zirconium Complexes with Non‐Salicylaldimine‐Type Imine–Phenoxy Chelate Ligands: Syntheses,Structures, and Ethylene‐Polymerization Behavior

New Ti and Zr complexes that bear imine–phenoxy chelate ligands, [{2,4‐di‐tBu‐6‐(RCH=N)‐C₆H₄O}₂MCl₂] ( 1 : M=Ti, R=Ph; 2 : M=Ti, R=C₆F₅; 3 : M=Zr, R=Ph; 4 : M=Zr, R=C₆F₅), were synthesized and investigated as precatalysts for ethylene polymerization. ¹H NMR spectroscopy suggests that these complexes exist as mixtures of structural isomers. X‐ray crystallographic analysis of the adduct 1 ?HCl reveals that it exists as a zwitterionic complex in which H and Cl are situated in close proximity to one of the imine nitrogen atoms and the central metal, respectively. The X‐ray molecular structure also indicates that one imine phenoxy group with the syn C?N configuration functions as a bidentate ligand, whereas the other, of the anti C?N form, acts as a monodentate phenoxy ligand. Although Zr complexes 3 and 4 with methylaluminoxane (MAO) or [Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ displayed moderate activity, the Ti congeners 1 and 2 , in association with an appropriate activator, catalyzed ethylene polymerization with high efficiency. Upon activation with MAO at 25 °C, 2 displayed a very high activity of 19900 (kg PE) (mol Ti)^?1 h^?1, which is comparable to that for [Cp₂TiCl₂] and [Cp₂ZrCl₂], although increasing the polymerization temperature did result in a marked decrease in activity. Complex 2 contains a C₆F₅ group on the imine nitrogen atom and mediated nonliving‐type polymerization, unlike the corresponding salicylaldimine‐type complex. Conversely, with [Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ activation, 1 exhibited enhanced activity as the temperature was increased (25–75 °C) and maintained very high activity for 60 min at 75 °C (18740 (kg PE) (mol Ti)^?1 h^?1). ¹H NMR spectroscopic studies of the reaction suggest that this thermally robust catalyst system generates an amine–phenoxy complex as the catalytically active species. The combinations 1 /[Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ and 2 /MAO also worked as high‐activity catalysts for the copolymerization of ethylene and propylene.     

Molybdenum(VI) Bis(imido) Complexes: From Frustrated Lewis Pairs to Weakly Coordinating Cations

Molybdenum(VI) bis(imido) complexes [Mo(NtBu)₂(L^R)₂] (R=H 1 a ; R=CF₃ 1 b ) combined with B(C₆F₅)₃ ( 1 a /B(C₆F₅)₃, 1 b /B(C₆F₅)₃) exhibit a frustrated Lewis pair (FLP) character that can heterolytically split H−H, Si−H and O−H bonds. Cleavage of H₂ and Et₃SiH affords ion pairs [Mo(NtBu)(NHtBu)(L^R)₂][HB(C₆F₅)₃] (R=H 2 a ; R=CF₃ 2 b ) composed of a Mo(VI) amido imido cation and a hydridoborate anion, while reaction with H₂O leads to [Mo(NtBu)(NHtBu)(L^R)₂][(HO)B(C₆F₅)₃] (R=H 3 a ; R=CF₃ 3 b ). Ion pairs 2 a and 2 b are catalysts for the hydrosilylation of aldehydes with triethylsilane, with 2 b being more active than 2 a . Mechanistic elucidation revealed insertion of the aldehyde into the B−H bond of [HB(C₆F₅)₃]⁻. We were able to isolate and fully characterize, including by single-crystal X-ray diffraction analysis, the inserted products Mo(NtBu)(NHtBu)(L^R)₂][{PhCH₂O}B(C₆F₅)₃] (R=H 4 a ; R=CF₃ 4 b ). Catalysis occurs at [HB(C₆F₅)₃]⁻ while [Mo(NtBu)(NHtBu)(L^R)₂]⁺ (R=H or CF₃) act as the cationic counterions. However, the striking difference in reactivity gives ample evidence that molybdenum cations behave as weakly coordinating cations (WCC).     

A Janus‐Headed Lewis Superacid: Simple Access to,and First Application of Me3Si‐F‐Al(ORF)3

Upon reaction of gaseous Me₃SiF with the in situ prepared Lewis acid Al(OR^F)₃, the stable ion‐like silylium compound Me₃Si‐F‐Al(OR^F)₃ 1 forms. The Janus‐headed 1 is a readily available smart Lewis acid that differentiates between hard and soft nucleophiles, but also polymerizes isobutene effectively. Thus, in reactions of 1 with soft nucleophiles (Nu), such as phosphanes, the silylium side interacts in an orbital‐controlled manner, with formation of [Me₃Si?Nu]⁺ and the weakly coordinating [F?Al(OR^F)₃]^– or [(^FRO)₃Al‐F‐Al(OR^F)₃]^– anions. If exchanged for hard nucleophiles, such as primary alcohols, the aluminum side reacts in a charge‐controlled manner, with release of FSiMe₃ gas and formation of the adduct R(H)O?Al(OR^F)₃. Compound 1 very effectively initiates polymerization of 8 to 21 mL of liquid C₄H₈ in 50 mL of CH₂Cl₂ already at temperatures between ?57 and ?30 °C with initiator loads as low as 10 mg in a few seconds with 100 % yield but broad polydispersities.     

Insight into Oxide‐Bridged Heterobimetallic Al/Zr Olefin Polymerization Catalysts

Reaction of (TBBP)AlMe ? THF with [Cp*₂Zr(Me)OH] gave [(TBBP)Al(THF)?O?Zr(Me)Cp*₂] (TBBP=3,3’,5,5’‐tetra‐tBu‐2,2'‐biphenolato). Reaction of [DIPPnacnacAl(Me)?O?Zr(Me)Cp₂] with [PhMe₂NH]⁺[B(C₆F₅)₄]^? gave a cationic Al/Zr complex that could be structurally characterized as its THF adduct [(DIPPnacnac)Al(Me)?O?Zr(THF)Cp₂]⁺[B(C₆F₅)₄]^? (DIPPnacnac=HC[(Me)C=N(2,6‐iPr₂?C₆H₃)]₂). The first complex polymerizes ethene in the presence of an alkylaluminum scavenger but in the absence of methylalumoxane (MAO). The adduct cation is inactive under these conditions. Theoretical calculations show very high energy barriers (ΔG=40–47 kcal mol^?1) for ethene insertion with a bridged AlOZr catalyst. This is due to an unfavorable six‐membered‐ring transition state, in which the methyl group bridges the metal and ethene with an obtuse metal‐Me‐C angle that prevents synchronized bond‐breaking and making. A more‐likely pathway is dissociation of the Al‐O‐Zr complex into an aluminate and the active polymerization catalyst [Cp*₂ZrMe]⁺.     

One‐Electron Oxidation of a Disilicon(0) Compound: An Experimental and Theoretical Study of [Si2]+ Trapped by N‐Heterocyclic Carbenes

One‐electron oxidation of the disilicon(0) compound Si₂(Idipp)₂ ( 1 , Idipp=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene) with [Fe(C₅Me₅)₂][B(Ar^F)₄] (Ar^F=C₆H₃‐3,5‐(CF₃)₂) affords selectively the green radical salt [Si₂(Idipp)₂][B(Ar^F)₄] ( 1 ‐[B(Ar^F)₄). Oxidation of the centrosymmetric 1 occurs reversibly at a low redox potential (E_1/2=?1.250 V vs. Fc⁺/Fc), and is accompanied by considerable structural changes as shown by single‐crystal X‐ray structural analysis of 1 ‐B(Ar^F)₄. These include a shortening of the Si?Si bond, a widening of the Si‐Si‐C_NHC angles, and a lowering of the symmetry, leading to a quite different conformation of the NHC substituents at the two inequivalent Si sites in 1⁺ . Comparative quantum chemical calculations of 1 and 1⁺ indicate that electron ejection occurs from the symmetric (n₊) combination of the Si lone pairs (HOMO). EPR studies of 1 ‐B(Ar^F)₄ in frozen solution verified the inequivalency of the two Si sites observed in the solid‐state, and point in agreement with the theoretical results to an almost equal distribution of the spin density over the two Si atoms, leading to quite similar ²⁹Si hyperfine coupling tensors in 1⁺ . EPR studies of 1 ‐B(Ar^F)₄ in liquid solution unraveled a topomerization with a low activation barrier that interconverts the two Si sites in 1⁺ .     

Facile access to the pnictocenium ions [Cp*ECl]+ (E = P, As) and [(Cp*)2P]+: chloride ion affinity of Al(OR(F))3

The pnictocenium salts [Cp*PCl]⁺[μCl]^? ( 1 a ), [Cp*PCl]⁺[ClAl(OR^F)₃]^? ( 1 b ), [Cp*AsCl]⁺[ClAl(OR^F)₃]^? ( 2 ), and [(Cp*)₂P]⁺[μCl]^? ( 3 ), in which Cp*=Me₅C₅, μCl=(^FRO)₃Al? Cl? Al(OR^F)₃, and OR^F=OC(CF₃)₃, were prepared by halide abstraction from the respective halopnictines with the Lewis superacid PhF→Al(OR^F)₃. 1 The X‐ray crystal structures of 1 a , 2 , and 3 established that in the half as well as in the sandwich cations the Cp* rings are attached in an η²‐fashion. By using one or two equivalents of the Lewis acid, the two new weakly coordinating anions [μCl]^? and [ClAl(OR^F)₃]^? resulted. They also stabilize the highly reactive cations in PhF or 1,2‐F₂C₆H₄ solution at room temperature. The chloride ion affinities (CIAs) of a range of classical strong Lewis acids were also investigated. The calculations are based on a set of isodesmic BP86/SV(P) reactions and a non‐isodesmic reference reaction assessed at the G3MP2 level.