膜催化研究II. 多孔无要膜的制备与表征及其反应器对甲醇脱氢反应的促进作用

采用溶胶-凝胶法制备了多孔氧化铝膜, 并通过DSC、TGA、SEM、N~2吸附和气体透过率测定等手段, 对膜的性能进行了表征。结果表明, 用这种方法制备的多孔氧化铝膜是一种均匀无裂痕和具有较窄孔径分布(约4nm)的膜材料。将此多孔氧化铝膜制成膜反应器后, 用于甲醇催化脱氢制甲醛的反应, 发现甲醇转化率比常规反应器有较大幅度的提高。同时首次尝试采用溶胶-凝胶法将催化活性组分直接负载到多孔氧化铝膜上, 从而得到了一种具有催化活性的多孔膜, 并考察了它的反应活性。文中对由这两种多孔膜及钯/陶瓷复合膜制成的反应器的特点进行了比较。     

Preparation and properties of polyurethane networks based on α,ω-difunctional poly(hexafluoropropylene oxide)

Poly(hexafluoropropylene oxide), poly(HFPO), networks were prepared from functional polymers by end linking via urethane groups. The prepolymers were characterized by NMR spectroscopy and GPC. The networks were characterized by determination of the number of network chains from the shear modulus, and were snown to contain both trifunctional crosslinks and difunctional links. The properties of the networks were investigated by a range of techniques. Compared with fully-fluorinated networks formed via triazine cross-links, investigated previously, the urethane-linked networks were more readily prepared but were poorer elastomers, were less thermally stable, and were less resistant to swelling by common polar solvents. © 1995 John Wiley & Sons, Inc.     

云南菊科中草药中铅含量特征分析

论述了云南２７种菊科中草药及其水提取物中铅含量的特征。菊科植物及水提物中铅含量的频数分布为正偏态,两者的相关系数ｒ＝０．０９,未呈现显著的线性相关。提取率较高的山紫苑、佩兰、木香铅实际含量低;铅含量高的叶下花、狭叶兔耳风、臭灵丹提取率又较低,减少了人体对Ｐｂ的过量摄入。     

南瓜籽烘烤前后化学成分的分析

对烘烤前后南瓜籽中的化学成分进行分析并对比。采用同时蒸馏萃取装置萃取南瓜籽中的挥发性成分,采取超临界CO2萃取技术萃取南瓜籽油脂,并将其分为酸、碱、中性三个部分,用气相色谱-质谱联用方法分析其中化学成分并进行对比。结果表明,南瓜籽挥发性成分中含有多种醛类和酯类化合物,烘烤后产生了大量的烷基吡嗪,其在碱性部分中的相对含量比烘烤前提高14倍多,不饱和醛类化合物含量也有明显提高。南瓜籽油脂中的主要化学成分是油酸、亚油酸及其酯类。还含有生物活性功能成分如植物甾醇、角鲨烯和维生素E等。烘烤后除角鲨烯含量有所降低,维生素E、植物甾醇、亚麻酸等均有提高。     

电感耦合等离子体质谱(ICP-MS)法测定玻纤滤筒中金属元素本底值的预处理方法探讨

探讨了不同预处理方法对国产玻纤滤筒本底值的降低效果,便于废气样品的分析测定。分别对空白滤筒、热硝酸、硝酸+硫酸和硝酸+EDTA、HCl处理后的滤筒进行分析,测得滤筒中金属元素的含量;对处理效果较好的一批滤筒进行空白加标,考察加标回收率,全程用电感耦合等离子体质谱(ICPMS)法对样品进行测定,结果发现空白滤筒中部分金属元素含量较高;热硝酸处理后,滤筒本底中铅含量有所降低,但其它元素去除效果不显著;硝酸+硫酸处理后,滤筒中铅含量剧增;硝酸+EDTA处理滤筒,铅可以得到较好的去除效果,大部分金属元素含量有了明显降低;基于HCl对金属有较好的溶出效果,浸泡可较好地降低滤筒中金属元素的含量,但大量氯离子存在对ICP-MS法测定的干扰较大。对硝酸+EDTA处理后的滤筒进行空白加标,大部分金属元素加标回收率75%。故以硝酸+EDTA处理玻纤滤筒可以使国产玻纤滤筒适用于废气样品的分析。     

碳苷研究 V: 用Grignard试剂合成取代苯酚中酚羟基的保护及脱保护

本文报道了一些取代苯酚的合成, 并探讨了用Grignard试剂合成取代苯酚中酚羟基的保护及脱保护的问题. 利用苄基和甲基作为酚羟基的保护基, 对文献报道的切断醚键脱保护方法进行了评价. 找到了两种新体系能在更温和条件下切断醚键的方法, 指出了它们的适用条件. 实验结果符合硬软酸碱理论.     

蛋白质组学技术筛选与鉴定癫痫疾病的差异蛋白质

应用蛋白质组学双向凝胶电泳(Two-dimensional gel electrophoresis, 2DE)和质谱技术, 定量分析和鉴定了癫痫组(n=3)和正常组(n=3)脑组织的差异表达蛋白, 以从蛋白质水平上揭示癫痫病的发机制. 结果表明, 凝胶图谱可辨识2500~3000个蛋白点, 对21个显著差异表达蛋白点进行质谱鉴定和SwissProt数据库检索, 得到17个癫痫差异蛋白, 其中2个蛋白在癫痫组织中表达上调, 15个蛋白表达下调. 部分蛋白与癫痫的关系属首次报道. 这些蛋白与癫痫的发生发展相关, 可能成为癫痫的分子标志物和药物治疗的靶向蛋白.     

锂离子电池纳米正极材料

综述了锂离子电池纳米正极材料的研究进展,阐述了这种材料用于锂离子电池的优势和存在的问题,把纳米正极材料分为过渡金属嵌锂化合物、金属氧化物和金属硫化物和其它纳米正极材料。归纳了不同纳米正极材料的主要制备方法,探讨了材料的制备方法与其结构、形貌和电化学性能之间的关系,展望了纳米正极材料用于锂离子电池的未来前景。     

微胶囊化颜料粒子表面形貌的模式识别及量化表征

材料粒子的微胶囊化可提高材料的某些耐性［'j．群青颜料色泽鲜艳，但不耐酸，对群g粒子进行微胶囊化可改善其耐酸性．但由于相应粒子表面形貌不同，难以辩别与描述．本方使民计算机图像处理［'屿模式识别技术［'j，并用表面分形维数量化表征粒子的表面形貌［'j．1实验部分以群青粒子为芯材、以Na。SIO。与NH。CI水解产物硅胶为膜材，进行粒子的微胶囊化．将改变乳化剂浓度、搅拌速率两系列微胶囊化样品及原样采用JFY－ABI型测色计进行耐酸性色差（凸E）测试．粒子的表面形貌在X－650型扫描电子显微镜（配图像分析仪）下，经过数S化…     

等离子体发射光谱法测定茶水中无机元素的含量

采用电感耦合等离子体发射光谱法对茶水中的无机元素进行分析,对其中的Cu、Zn、Mn、P、Fe5种元素进行定量,讨论了等离子体发射光谱法最佳实验条件及影响茶叶中无机元素浸出量的因素。Cu、Zn、Mn、P、Fe的回收率为92．5％～103．5％,测定结果的相对标准偏差为1．34％-4．5％（n=5）。     

幼儿身高、体重和头发、血液锌铅含量关系的研究

同步检测了151例3-4岁健康幼儿的身高、体重以及头和全血中的锌、铅含量。研究了身高、体重和锌、铅含量的关系,指出无论是发锌或血锌含量与身高、体重多数呈正相关,但发铅与身高、体重主要呈负相关,血铅与身高、体重的关系较为复杂,多为非线性的二次函数关系。     

玩具、铅笔中可溶性砷、锑、硒的形态分析

对玩具、铅笔中可溶性砷、锑、硒的形态分析方法进行了研究,对原子荧光光谱法测定不同价态砷、锑、硒的方法进行了优化,建立了砷、锑、硒的原子荧光光谱形态分析方法。该方法样品加标回收率为82.0%~110.0%,测定结果的相对标准偏差为1.35%~2.22%(n=10)。     

FT-IR, FT-Raman spectra, density functional computations of the vibrational spectra and molecular geometry of biomolecule 5-aminouracil

FT-IR and FT-Raman spectra of the biomolecule 5-aminouracil were recorded in the regions 400–4000 cm⁻¹ and 10–3500 cm⁻¹, respectively. The observed vibrational wavenumbers were analyzed and assigned to different normal modes of vibration of the molecule. Density functional calculations were performed to support wavenumber assignments of the observed bands. A comparison with the molecule of uracil was made, and specific scale factors were employed in the predicted wavenumbers of 5-aminouracil. With the purpose of study the important molecule 5-aminouracil, its equilibrium geometry and harmonic wavenumbers were calculated for the first time by the B3LYP DFT method. The vibrational wavenumbers were compared with IR and Raman experimental data. Also good reproduction of the experimental wavenumbers is obtained and the % error is very small. All the tautomeric forms of 5-aminouracil were determined and optimized. The dimer forms were also simulated. The energy, atomic charges and dipole moments were discussed and several general conclusions were underlined.     

Gas chromatography-olfactometry analysis of the volatile compounds of two commercial Irish beef meats

The volatile flavour compounds of two commercial Irish beef meats (labelled as conventional and organic) were evaluated by gas chromatography-olfactometry and were identified by gas chromatography-mass spectrometry. The volatile compounds were isolated in a model mouth system. Gas chromatography-olfactometry was performed by a group of eight assessors using the detection frequency methodology. The odours of the detected compounds were described as well. Eighty-one volatile compounds were identified, 11 compounds of which possessed odour activity in the first beef sample and 14 of which in the second meat sample. Ten volatile flavour compounds were common to both: methanethiol, dimethyl sulphide, 2-butanone, ethyl acetate, 2- and 3-methylbutanal, an unknown compound, 2-octanone, decanal and benzothiazole. Two unknown compounds were only detected in the first sample while 2,3-pentanedione, 4-methyl-3-penten-2-one, 2-heptanone, dimethyl trisulphide and nonanal were only perceived in the second beef. Significant differences in terms of detection frequency, odour characteristics and in nature of the volatile flavour compounds were emphasised between the two samples.     

氯胺酮、羟亚胺及邻氯苯基环戊酮合成工艺的判别研究

氯胺酮通常以羟亚胺和邻氯苯基环戊酮为主要合成原料。该文采用气相色谱-质谱联用(GC-MS)检测缴获邻氯苯基环戊酮样品中的杂质,并筛选出邻氯苯甲腈以及格氏试剂合成过程中的副反应产物环戊酮、环戊醇、环戊基环戊烷、2-环戊基环戊酮和2-环戊基环戊醇作为特征杂质。通过邻氯苯基环戊酮合成实验,验证了6种特征杂质为邻氯苯甲腈与格氏试剂反应所产生。通过液-液萃取的前处理方法,从缴获羟亚胺样品检测出残留的4种特征杂质。采用顶空/气相色谱-质谱联用(HS/GC-MS)方法从氯胺酮样品中检出残留的2种特征杂质。结果表明,所有缴获的邻氯苯基环戊酮和羟亚胺样品,以及105份氯胺酮样品中的102份均检出2种以上特征杂质,由此推测,格氏试剂法是国内非法工厂生产邻氯苯基环戊酮普遍采用的工艺路线。     

Speciation of Selenium in Supplements by High Performance Liquid Chromatography-Inductively Coupled Plasma-Mass Spectrometry

Anion and cation exchange high-performance liquid chromatography (HPLC) combined with inductively coupled plasma-mass spectrometry (ICP-MS) were used for speciation of selenium in supplements. All the parameters in the extraction, separation, and determination procedures were optimized. Recovery studies for the selenium species from the anion and cation exchange columns were performed and there were no analyte losses. Limits of detection for selenium(IV), selenium(VI), Se in selenomethionine, and Se in selenocystine were 0.85, 0.68, 0.84, and 0.99 nanogram per milliliter, respectively. Six brands were analyzed to identify and quantify the selenium species present, and the results found were compared with the values given on the labels. The selenium species matched the labeled species for four brands, whereas two brands were found to contain inorganic Se(VI) in contrast with the labeled claim of selenomethionine.     

Preparation of Titania/PDMS Hybrid Films and the Conversion to Porous Materials

Transparent films of titania/poly(dimethylsiloxane) (PDMS) hybrids were prepared by the solvent evaporation from the precursor solution prepared by the co-hydrolysis and co-condensation of titanium tetraisopropoxide and a methoxy-functionalized PDMS. The hybrid films were flexible and had high homogeneity of the composition. The organic groups of PDMS were decomposed at 400°C in air to form porous films. Though the heated films were rather brittle compared to the as-synthesized films, they were still transparent and homogeneous. The BET surface areas of the films after the heat treatment at 400°C were over 300 m²/g, while the as-synthesized hybrid films were non porous. According to the BDDT classification, the nitrogen adsorption/desorption isotherms of the calcined films were Type I, showing that the films were microporous. The titania domains were still amorphous after the heat treatment at 400°C and transformed to anatase after the heat treatment at 1,000°C.     

CO2加氢合成二甲醚的催化剂的制备

先采用均匀沉淀法制备出CuO—ZnO催化剂,然后以CuO—ZnO催化剂作为晶核采用水热合成法制备出CuO—ZnO／HZSM-5（氢型ZSM-5分子筛）复合催化剂．利用X射线衍射和氨程序升温脱附手段对复合催化剂进行表征,并应用于CO2催化加氢合成二甲醚的反应．研究结果表明,在相同的反应条件下,这种CuO—ZnO／HZSM-5复合催化剂与采用物理混合法制备出的复合催化剂相比具有更好的催化效果,不但提高了CO2的转化率、二甲醚的选择性以及二甲醚和甲醇的总选择性,同时还改善了催化剂的稳定性．     

二芴及其衍生物的结构优化、前线轨道及其性质的理论研究

采用DFT/B3LYP方法对系列二芴体系进行了全优化, 对其结构特征进行对比. 在此基础上, 得到各分子的最高占据轨道和最低空轨道能量关系及HOMO-LUMO能隙, 并分析其能隙与导电性的关系及预计其光谱特征. 对各分子的相关热力学性质进行了研究. 热力学参数表明各分子均较稳定, 其中化合物DFBT最稳定. 采用ZINDO和TD-DFT方法计算其吸收光谱, 分析结构特征对光谱性质的影响. 二芴中插入共轭程度高的结构后, 分子的共轭程度增加; HOMO-LUMO能隙变窄; 最低激发能降低, 导电性增强; 吸收光谱红移. 而接入扭曲的结构后, 共轭程度降低; HOMO-LUMO能隙变宽; 最低激发能有所升高, 导电性下降; 吸收光谱蓝移.     

Synthesis,characterization, and antimicrobial activity of some novel poly(ether ketone)s

Low molecular weight poly(ether ketone)s were synthesized from phenol, 1,4‐phenylenedioxy diacetylchloride, chloroacetylchloride, and dichloroalkanes [1,2‐dichloroethane and dichloromethane] by a Friedel–Crafts reaction with anhydrous aluminum chloride as a catalyst and carbon disulfide as a solvent. The conditions for the preparation of the poly(ether ketone)s and the chlorine contents obtained with the Carius method were examined, and a reaction scheme for each resin was established. The molecular weights and polydispersities of the resins were obtained by gel permeation chromatography. The polyketones were characterized by IR spectroscopy. The characteristic frequencies due to different functional groups were assigned. The thermal properties of the resins were studied with thermogravimetry and differential scanning calorimetry. The characteristic temperatures of thermal degradation for the poly(ether ketone)s were evaluated with thermogravimetric analysis. The kinetic parameters for the decomposition reactions of the resins were obtained with Broido and Doyle's method, and the heats of fusion were obtained from differential scanning calorimetry thermograms. The polyketones were thermally stable up to 200 °C. All the polyketones were tested for their microbial properties against bacteria, fungi, and yeast. The effect of poly(ether ketone)s on the growth of these microorganisms was investigated, and the polyketones were found to inhibit the growth of the microorganisms to a considerable extent. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2335–2344, 2003