Periodate oxidation analysis of carbohydrates : Part I. Spectrophotometr1c determination of glyoxal in dialdehyde fragments formed from glycosides with 2,4-dinitrophenylhydrazine

A simple procedure for the determination of glyoxal in dialdehyde fragments, formed from glycosides by periodate oxidation, is proposed. By heating sample solutions prepared by dilution of reaction mixtures for periodate oxidation, with an aqueous dimethylsulfoxide solution of 2,4-dinitrophenylhydrazine hydrochloride. followed by addition of an aqueous ethanolic solution of potassium hydroxide, intense color with an absorption maximum at 576 nm developed. The spectrophotoinetric method based on this color reaction makes it possible to determine selectively 1·10^?2–2·10^?1 μmole amounts of conjugated glyoxal without a prior liberation process. Data for glyoxal content obtained by this procedure are discussed in relation to overoxidation.     

Methylmercuric halide-halide complexation in ethanol solution

The formation constants for CH₃HgCl₂^? at 26°C (0.31 l/mole), and for CH₃HgBr₂^? at 26°C (0.94 l/mole) and at 60°C (0.70 l/mole) in ethanol solution have been determined from the variation of Hg NMR chemical shift (by INDOR) with composition of methylmercuric halide-lithium halide solutions. These data have been employed in a reexamination of the “one-anion” and “two-anion” catalysed reactions of mercuric bromide with alkylmercuric bromides.     

Extraction of small amounts of dialkylphosphorodithioates with tetraphenylarsonium

The extraction behaviour of ion-pairs formed by dialkylphosphorodithioates with tetraphenylarsonium cation was examined for the dichloromethane—water system. The mole ratio method, with spectrophotometric and conductimetric measurements of the organic phase, showed the mole ratio of the ion-pair to be 1:1. Dissociation of the ion-pairs occurred at concentrations in the aqueous phase lower than 10^?1 mol dm^?3 for the dimethyl compound and 6 × 10^?4 mol dm^?3 for the diethyl analogue. Under favourable experimental conditions, dialkylphosphorodithioates can be collected from aqueous solutions at concentrations not exceeding 1 μg cm^?3 (ca. 5 × 10^?6 mol dm^?3), with extraction efficiencies of 86–95%. Dialkylphosphorothioates are extracted much less efficiently; diethylphosphate and inorganic phosphate are not extracted.     

Ionic‐Liquid‐Based Acidic Aqueous Biphasic Systems for Simultaneous Leaching and Extraction of Metallic Ions

The first instance of an acidic aqueous biphasic system (AcABS) based on tributyltetradecyl phosphonium chloride ([P₄₄₄₁₄][Cl]) and an acid is here reported. This AcABS exhibits pronounced thermomorphic behavior and is shown to be applicable to the extraction of metal ions from concentrated acidic solutions. Metal ions such as cobalt(II), iron(III), platinum(IV) and nickel(II) are found to partition preferentially to one of the phases of the acidic aqueous biphasic system and it is here shown that it successfully allows the difficult separation of Co^II from Ni^II, here studied at 24 and 50 °C.     

Aqueous polymerization of acrylamide initiated by acidic potassium permanganate–ascorbic acid redox system

The polymerization of acrylamide initiated by the acidic permanganate–ascorbic acid redox pair has been studied in aqueous media at 30 ± 0.2°C in nitrogen atmosphere. The initial rate of polymerization has been found to be proportional to nearly the first power of the catalyst KMnO₄ concentration within the range 6.0 × 10^?3–14.0 × 10^?3 mole/l. The rate is proportional to the first power of the monomer concentration within the range 4.00 × 10^?2–12.0 × 10^?2 mole/l. However, the rate of polymerization is independent of ascorbic acid concentration within the range 3.0 × 10^?3–6.0 × 10^?3 mole/l., but the further increase of the concentration depresses the rate of polymerization as well as maximum conversion. The initial rate increases but the maximum conversion decreases as the temperature is increased within the range 20–35°C. The overall energy of activation has been found to be 9.8 kcal/mole. The optimum amount of sulfuric acid is essential to initiate the polymerization but its presence in excess produces no effect either on the rate of reaction or the maximum conversion. Water-miscible organic solvents and salts, e.g., CH₃OH, C₂H₅OH, (CH₃)₂CHOH, KCl, and Na₂SO₄, depress the rate. Slight amounts of MnSO₄ · H₂O and a complexing agent NaF increase the rate of polymerization. Cationic and anionic detergents have been found to decrease and increase the rate, respectively, while nonionic surfactants have no effect on the rate of polymerization.     

A pulse radiolysis study of the reactions of the hydrated electron and hydroxyl radical with the oxalate ion in neutral aqueous solution

The rate constants of the reactions of e _aq ^? and the OH^· radical with the oxalate ion in a neutral aqueous solution were measured by means of the pulse radiolysis technique. They were found to be (3.5 ± 0.5) × 10⁷ and (1.5 ± 0.2) × 10⁷ l mol^?1 s^?1, respectively. The radical anion ^?OOC-C^·OO^2? is characterized by an optical absorption band that has a maximum at 270 nm and a molar absorption coefficient of (2400 ± 200) l mol^?1 cm^?1. The radical anion ^·OOC-COO^?, the product of the reaction with the OH^· radical, exhibits absorption that has no maximum and increases in intensity with a decrease in the wavelength extending to the UV region (?₂₂₀ = 1800 l mol^?1 cm^?1). The mechanism of radiation-chemical transformations in aqueous oxalate solutions is discussed.     

A Sensitive Spectrophotometric Determination of Tantalum (V) with 5,7-Diiodo-8-Hydroxyquinoline

A spectrophotometric method for the determination of trace amounts of tantalum (V) with 5–7-diiodo-8-hydroxyquinoline is described. With this reagent tantalum forms a yellowish-orange coloured complex which is stable in the pH range of 8.5–9.0. The coloured complex obeys Beer's law over the concentration range of 1–10 μg tantalum (V) ml^?1 at 415 nm in aqueous solution with a molar absorptivity of 5.305×10³ l mol^?1 cm^?1. The metal; ligand ratio ML₂ was confirmed by Job's continuous variation and mole ratio methods. The method was used to determine tantalum in steels.     

Liquid-liquid extraction of 233Pa(V) with Aliquat 336</p> </p>

Summary The extraction of protactinium with Aliquat 336 (methyl-tri-caprylyl ammonium chloride) in toluene, cyclohexane and chloroform from HCl, HNO₃, H₂SO₄, HClO₄, HF and mixed HCl-HF media was investigated by radioactive tracer technique. Distribution ratios of protactinium between the aqueous solution and the organic phase were determined as a function of shaking time, concentrations of acid in aqueous solution phase, extractant concentration and type of diluents in the organic phase. Aliquat 336 can almost quantitatively extract protactinium from strong HCl solution. At the same time, small amounts of HF in HCl solutions have a strong effect on Pa distribution.</p> </p>     

Microscopic Imaging of Chiral Amino Acids in Agar Gel through Circularly Polarized Luminescence of EuIII Complex

We recently found that [Eu(pda)₂]^? (pda: 1,10‐phenanthroline‐2,9‐dicarboxylic acid), which has an achiral structure in crystals, exhibits circularly polarized luminescence (CPL) in aqueous solutions containing chiral amino acids such as arginine and histidine. CPL measurements were performed for agar gel, which includes an aqueous solution of [Eu(pda)₂]^? and chiral arginine or histidine. The spectral shape, concentration, and pH dependences on CPL intensity in the agar gels were very close to those in aqueous solutions, indicating that the CPL of the Eu^III complex in the agar gels was induced by mechanism similar to that in aqueous solutions. We performed spatially resolved CPL measurements using a laboratory‐built microscopic CPL spectroscopic system for agar‐gel samples, where d ‐ and l ‐ amino acids were separately dispersed. We successfully recorded CPL imaging maps showing spatial dispersions of d ‐ and l ‐amino acid in the agar gels.     

Regularities of the photodestruction of acridine dyes in aqueous media

Acridine dyes were found to exhibit a low light fastness in oxygen-containing aqueous solutions because of photooxidation with the participation of molecular oxygen. The values of the quantum yield for the photooxidation of Acridine Yellow, Acridine Orange, and proflavin acetate at their initial concentration 2 × 10^?5 mol/l were determined to be 1.8 × 10^?3, 1.5 × 10^?3, and 0.8 × 10^?3, respectively. It was concluded that the photooxidation of these acridine dyes in dilute solutions results in the formation of primary photoproducts of peroxide nature. For proflav in acetate, as an example, it was demonstrated that the increase of the substrate concentration to 6 × 10^?4 mol/l results in a fourfold increase in the quantum yield, a behavior indicative of a change in the photodecomposition mechanism. The rate of the interaction between exited and unexcited proflavin molecules, the process responsible for the photodecomposition of this compound, was found to be ～4 × 10⁷ l/(mol s). The quantum yield for the photooxidation of the proflavin base was estimated to exceed that for the photooxidation of the proflavin monocation by more than an order of magnitude.     

Extraction and separation of uranium(VI) and protactinium(V) with 1-(4-tolyl)-2-methyl-3-hydroxy-4-pyridone

Summary The extraction of uranium(VI) from aqueous hydrochloric or nitric acid, and the extraction of protactinium from hydrochloric acid by 1-(4-tolyl)-2-methyl-3-hydroxy-4-pyridone (HY) dissolved in chloroform has been studied. At pH >4, uranium (VI) is quantitatively extracted while at pH < 1 practically all the uranium remains in the aqueous phase. At hydrochloric acid concentrations lower than 1M, protactinium(V) is quantitatively extracted while at hydrochloric acid concentration higher than 5M practically all the protactinium remains in the aqueous phase. This difference in extraction of uranium and protactinium was utilized for their separation. From 0.5M hydrochloric acid, protactinium is quantitatively extracted, and separated from uranium.The composition of the extracted uranium(VI) and protactinium (V) complexes was studied. A uranium complex with the formula UO₂Y₂ · HY was isolated from the chloroform solution. The solution of this complex in chloroform has a maximum absorbance at 319 nm and the molar absorptivity is 3.1×10⁴ l · mole^–1 · cm^–1. Owing to this property uranium can be determined spectro-photometrically directly in the organic phase.

---

Zusammenfassung Die Extraktion von Uran(VI) aus wäßriger Salzsäure oder Salpetersäure sowie die Extraktion von Protaktinium aus Salzsäure mit 1-(4-Tolyl)-2-methyl-3-hydroxy-4-pyridon (HY) in chloroformischer Lösung wurde untersucht. Bei pH > 4 wird U(VI) quantitativ extrahiert, während bei pH < 1 praktisch alles Uran in der wäßrigen Phase bleibt. Bei Salzsäurekonzen-trationen unter 1-m wird Protaktinium (V) quantitativ extrahiert, während bei Salzsäurekonzentrationen über 5-m praktisch alles Pa in der wäßrigen Phase bleibt. Dieser Unterschied bei der Extraktion der beiden Elemente wurde für deren Trennung benützt. Pa wird aus 0,5-m Salzsäure quantitativ extrahiert und so von Uran getrennt.Die Zusammensetzung der extrahierten U (VI)- und Pa (V)-Komplexe wurde untersucht. Ein Urankomplex der Formel UO₂ · Y₂ · HY wurde aus der Chloroformlösung isoliert. Die Lösung dieses Komplexes in Chloroform hat ein Absorptionsmaximum bei 319 nm und eine molare Extinktion von 3,1 · 10⁴ l · mol^–1 · cm^–1. Auf Grund dieser Eigenschaft kann Uran spektrophotometrisch direkt in der organischen Phase bestimmt werden.

     

Extraction-Spectrophotometric or -Atomic Absorption Spectrophotometric Determination of Titanium Using Caffeic Acid and a Liquid Ion Exchanger

Abstract

A selective and sensitive method for the extraction followed by a spectrophotometric or atomic absorption spectrophotometric determination of titanium(IV) in trace amounts is described. The molar absorptivity of the caffeic acid-Aliquat 336 complex is 5.7 × 10⁴ l mol^?1 cm^?1 at 380 nm; the yellow coloured complex obeys Beer's law in the range 0.05–1.2 mg/l of titanium in the final extract. The method is applied to the preconcentration, separation and determination of titanium(IV) in steel, industrial effluents and environmental samples.     

Sulfonated polyaniline‐graphene oxide hybrids: Synthesis and effect of monomer composition on the electrochemical signal for direct DNA detection

A variety of sulfonated polyaniline‐graphene oxide (SPAN‐GNO) nanocomposites based on GNO, aniline (ANI) and m‐aminobenzenesulfonic acid (ABSA) are prepared via changing the mole ratio of ANI to ABSA for the comparison of DNA sensing behavior. Self‐signals of SPAN‐GNO are employed for estimating the effect of preparation conditions [component, monomer composition (mole ratio of ANI to ABSA), and reaction time] on DNA immobilization and hybridization detection. Then, we find herein that the mole ratio of ANI to ABSA plays a lead role over other factors on hybridization efficiency. Meanwhile, the parallel experiments using methylene blue as the classic indicator verifies this conclusion. The results show that, by comparison with other mole ratio SPAN‐GNO nanocomposites‐modified electrodes, the mole ratio (2:3) exhibits the widest dynamic detection range from 1.0 × 10^?14 to 1.0 × 10^?6 M, as well as the lowest detection limit (3.06 × 10^?15 M). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1762–1773     

Solvolyse des Tetrathiocyanato-dianilino-chromat(III)-ions in Aceton—Wasser-Mischungen

The solvolysis of the [Cr(NCS)₄(aniline)₂]^? complex ion has been studied in various acetone-water mixtures in the presence of perchloric acid (10^?3–10^?1 mole/l). In acid solutions the first two NCS^? ions are exchanged, presumably, for water molecules and in parallel an aniline molecule for acetone, the latter in a second order reaction, accelerated by hydrogen ions. The exchange of the amine is followed by the substitution of the first two NCS^? ions. The third and fourth NCS^? ions are substituted only in neutral or weakly acid solutions. Kinetic parameters have been derived for the reactions mentioned above. The influence of solvent composition and of acidity is discussed.     

Extraction—Spectrophotometric determination of nickel with 2-hydroxy-1-naphthaldoxime

A method for the solvent extraction—spectrophotometric determination of nickel with 2-hydroxyl-1-naphthaldoxime (HNA) has been studied. The method is based upon the formation of a nickel—HNA complex which is extracted into chloroform from an aqueous solution of pH 5.8. The nickel—HNA complex in chloroform exhibits an absorption maximum at 410 nm with molar absorptivity of 8.1 × 10³ liters mol^?1 cm^?1. Beer's law is applicable in the range from 5 to 50 μg of nickel. The mole ratio of the complex and effect of interfering ions are described.     

Liquid—liquid extraction and determination of uranium(IV) with 2,6-diacetylpyridine bis(benzoylhydrazone)

2,6-Diacetylpyridine bis(benzoylhydrazone) (H₂DPBH) is proposed as a ligand for the extraction of uranium(VI). Complete extraction from aqueous solutions into dichloromethane is achieved with a ligand/metal mole ratio of < for 10^?5?10^?4 M uranyl ion. Potentiometric measurements indicate that the extracted species is UO₂ (DPBH). Uranium can be determined in the extract by spectrophotometric measurements at 420 nm and by differentail pulse polarography (E_p = ?0.67 V) with tetraethylammonium bromide as supporting electrolyte. For both methods, the detection limit is about 2 × 10^?6 M in the extract.     

Determination of chemisorbed metals on planar fused-silica surfaces using thermal lens spectrometry

Thermal lens spectrometry was used to determine the surface concentrations of metals on planar fused-silica surfaces modified with the use of vanadium(V) oxochloride, tin(IV) tetrachloride, and titanium(IV) oxochloride after complexation reactions with 4-(2-pyridylazo)resorcinol and 2-thiazolylazopyrocatechol from aqueous solutions. The surface concentrations of vanadium and titanium found from thermal lens experiments (8 × 10^?11 and 6 × 10^?10 mol/cm², respectively) correlate well with those theoretically calculated based on monolayer and bilayer approximations for metal-containing groups, respectively. The coverage uniformity and the concentration of a chemisorbed substance on a glass surface were evaluated.     

Mechanism of oxidation of cyclohexanehexol (inositol) by quinquevalent vanadium

The oxidation of inositol by quinquevalent vandadium in acid medium is a first-order reaction both in vanadium (V) and inositol. The stoichiometry of the reaction is consistent with the use of two equivalents of vanadium (V) per mole of inositol with the formation of one mole of inosose. The reaction is catalyzed both by sulfuric and perchloric acid, but the rate is faster in sulfuric acid than in perchloric acid. In 1M–6M perchloric acid solutions the reaction has shown a variable order in H⁺, but in solutions of 2M–5M sulfuric and perchloric acid of constant ionic strength, the rate has a linear dependence on [H⁺]². There is also a linear correlation between the rate and bisulfate ions in sulfuric acid at constant hydrogen ion concentration. The energy of activation is found to be 19 kcal/mole and a negative entropy value of ? 14 e.u. A suitable mechanism, consistent with the kinetics in 2M–5M acid solutions, is suggested and the values of various rate constants are evaluated.     

Ion chromatographic determination of trace amounts of aluminium with on-line preconcentration and spectrophotometric detection

Trace amounts of aluminium in aqueous samples can be determined by ion chromatography using ammonium sulphate-nitric acid as eluent and pyrocatechol violet as post-column chromogenic reagent. The detection limit for a 50-μl sample is 10 μg 1^?1. Preconcentration of the sample (obtained by replacing the sampling loop with a short ion-exchange column) allows larger amounts of sample to be loaded and lowers the detection limit below 1 μg 1^?1.     

Spectrophotometric determination of phosphorus in river water based on the reaction of vanadomolybdophosphate with malachite green

The formation of an ion-associate between vanadomolybdophosphate and malachite green in aqueous acidic solution (0.5 M sulfuric acid) enables trace amounts (0?1 × 10^?5M) of phosphate to be determined. The molar absorptivity is 1.05 × 10⁵ l mol^?1 cm^?1 at 620 nm. The complex was stabilized in solution by adding poly (vinyl alcohol). Other ions generally found in river waters did not interfere. Interference by silicate is less than that found in the corresponding malachite green molybdophosphate procedure; interference of arsenate is avoided by reduction with thiosulfate. The method is applied to the determination of μg l^?1 amounts of phosphorus in river water; the results obtained were in good agreement with those obtained by an extraction-spectrophotometric method with malachite green.