Physically crosslinked poly(vinyl alcohol)-hydroxyethyl starch blend hydrogel membranes: Synthesis and characterization for biomedical applications

Poly(vinyl alcohol), PVA is a polymer of great importance because of its many appealing characteristics specifically for various pharmaceutical and biomedical applications. Physically crosslinked hydrogel membranes composed of different amounts of hydroxyethyl starch (HES) in (PVA) and ampicillin were prepared by applying freeze–thawing method. This freezing–thawing cycle was repeated for three consecutive cycles. Physicochemical properties of PVA–HES membrane gel such as gel fraction, swelling, morphology, elongation, tensile strength, and protein adsorption were investigated. Introducing HES into freeze–thawed PVA structure affected crystal size distribution of PVA; and hence physicochemical properties and morphological structure have been affected. Increased HES concentration decreased the gel fraction %, maximum strength and break elongation. Indeed it resulted into a significant incrementing of the swelling ability, amount of protein adsorption, broader pore size, and pore distribution of membrane morphological structure. Furthermore, an increase in HES concentration resulted in better and still lower thermal stability compared to virgin PVA and freeze–thawed PVA. The maximum weight loss of PVA–HES hydrogel membranes ranged between 18% and 60% according to HES content, after two days of degradation in phosphate buffer saline (PBS), which indicates they are biodegradable. Thus, PVA–HES hydrogel membranes containing ampicillin could be a novel approach for biomedical application e.g. wound dressing purposes.     

Preparation and Characterization of Poly(N‐Vinylpyrrolidone‐co‐Methacrylic Acid) Hydrogels

In this study, N‐vinylpyrrolidone (VP)/methacrylic acid (MAA) copolymers have been prepared at three different mole percents, the methacrylic acid composition being around 5, 10, 15%. MAA and VP monomer mixtures have been irradiated in ⁶⁰Co‐γ source at different irradiation doses and percent conversions have been determined gravimetrically. ～80% conversion of monomers into hydrogels were performed at 3.4 kGy irradiation dose. These hydrogels were swollen in distilled water at pH 4.0, 7.0, and 9.0. P(VP/MAA) hydrogel which contains 5% methacrylic acid showed the maximum % swelling at pH 9.0 in water. Diffusion of water was found to be of non‐Fickian character. Diffusion coefficients of water in P(VP/MAA) hydrogels were calculated. Initial swelling rates of P(VP/MAA) hydrogels increased with increasing pH and MAA content in hydrogels. Swelling kinetics of P(VP/MAA) hydrogels was found to be of second order. Thermal behavior of PMAA, PVP and P(VP/MAA) hydrogel were investigated by thermal analysis. P(VP/MAA) hydrogel gained new thermal properties and the temperature for maximum weight loss and temperature for half‐life of P(VP/MAA) hydrogel were determined.     

Use of electron beam for the production of hydrogel dressings

The electron beam irradiation technique has been utilized to prepare hydrogel wound dressings. The composition of the dressings is based on polyvinylpyrrolidone (PVP), poly(ethylene glycol) (PEG), and agar. Increasing the irradiation dose leads to an increase in the gel fraction; this increase is due to increased crosslink density. The gel fraction% decreases as the PEG concentration increases. The maximum swelling% decreases with increasing the irradiation dose, but increases with increasing the PEG concentration. This relationship can be utilized to modify the gel properties as gel fraction% and maximum swelling of the hydrogel. The prepared dressings could be considered as a good barrier against microbes.     

大孔PAMPS/PVA半互穿网络型水凝胶的制备及其性能研究

以PEG6000为成孔剂, 合成了大孔聚(2-丙烯酰胺-2-甲基丙磺酸)/聚乙烯醇半互穿网络型(s-IPN)水凝胶. 红外分析表明, PVA与PAMPS之间形成了较强的氢键, 使得PVA分子上的C—O伸缩振动吸收峰移向了低波数处. X射线衍射分析发现, 当PVA用量较高时, 由于部分的PVA结晶, 使得凝胶的半互穿网络结构不均匀. 电镜分析结果表明, 没有使用成孔剂的凝胶表面成褶皱形, 不存在任何孔洞结构; 而以PEG6000为成孔剂的凝胶表面存在相互贯穿的大孔结构. 研究了该水凝胶的溶胀性能, 结果表明, 该水凝胶的平衡溶胀度在116至320之间; 而成孔剂PEG6000的加入能较大幅度提高凝胶的溶胀速率, 凝胶在240 min之内就能达到溶胀平衡. 对凝胶抗压缩性能的研究表明, 当PVA用量为9.1% (w)时, 凝胶的抗压缩强度最大, 可达12.0 MPa; 而成孔剂的加入会在一定程度削弱凝胶的抗压缩强度. 该凝胶具有较好的电场敏感性, 研究发现, 将吸去离子水达到溶胀平衡的凝胶放入施加有电场的0.2 mol•L－1 NaCl溶液中时, 凝胶迅速偏向阳极. 而PVA和成孔剂PGE6000的用量均对凝胶的偏转速度以及最大偏转角存在较大的影响.     

Poly(N-vinylpyrrolidone) hydrogels: 1.Radiation polymerization and crosslinking of N-vinylpyrrolidone

POLY(N-VINYLPYRROLIDONE) HYDROGELS: 1 RADIATION POLYMERIZATION AND CROSSLINKING OF N-VINYLPYRROLIDONE). The effects of irradiation dose on the conversion of vinylpyrrolidone (VP) with various concentration and other characteristics such as Gelation Dose (Dg), Degree of Swelling (DS) and Equilibrium Water Content (EWC) have been investigated. Aqueous solution of vinylpyrrolidone with several concentrations such as 5, 10, 20, 40, 60, 80 and 100 Wt % were irradiated by using gamma rays of Cobalt-60 source with a dose rate of 0. 139 Gy/s. After irradiation, parameters such as conversion of vinylpyrrolidone, gelation dose, degree of swelling, and equilibrium water content were analyzed. Results show that the conversion of VP to PVP was almost 100% at a dose of 2 kGy. The gelation dose of PVP depends on initial content of monomer. Degree of swelling of gels with concentration of 10 % was 55 at the dose of 10 kGy and 30 at the dose of 40 kGy. The lowest value of degree of swelling is 15. At the range of irradiation dose of 10 to 40 kGy the EWC of gel was found to be 98 to 94 %.     

Manufacturing of pH sensitive PVA/PVP/MWCNT and PVA/PEG/MWCNT nanocomposites: an approach for significant drug release

The purpose of this paper is studying the effect of incorporation of Multiwall Carbon Nanotubes (MWCNT) into two different nanocomposites in poly vinyl alcohol (PVA)/polyvinylpyrrolidone (PVP), and PVA/Polyethylene glycol (PEG). MWCNT were synthesized by chemical vapor deposition (CVD) method using acetylene and Fe/Co/Al₂O₃ as carbon precursor and catalyst, respectively. Nitric acid and sulfuric acid were used for purification and functionalization of MWCNT. Afterward, highly pure and functionalized MWCNT (0, 0.02, and 0.05% w/w) were incorporated in PVA/PVP and PVA/PEG to synthesize PVA/PVP/MWCNT and PVA/PEG/MWCNT nanocomposites hydrogel membranes that cross-linked by freezing–thawing. PEG and PVP were selected in these nanocomposites as dispersion matrix for MWCNT as well as for increasing the elasticity of the nanocomposites membranes. The morphology of the hydrogels was characterized by SEM, FTIR, XRD, TGA, and the mechanical properties of the hydrogel membranes were investigated. The swelling behavior in different pH-buffer solutions was studied as well as studying weight loss percentage and swelling kinetic. The drug releasing process of the hydrogel membranes was investigated using salicylic acid as a model drug. It was found that MWCNT are dispersed well into the polymers and crystallinity, mechanical properties and thermal stability of the hydrogels contain MWCNT are better than that without MWCNT. Maximum degree of swelling was observed at pH 7 and swelling degree increases with increasing the ratio of MWCNT in the hydrogels from 0.02 to 0.05%. All hydrogel membranes followed non-Fickian mechanism and drug releasing were controlled by varying the pH and amount of MWCNT.     

Preparation and Characterization of Chitosan Composite Membranes Crosslinked by Carboxyl-capped Poly（ethylene glycol）

In this study a series of chemically crosslinked chitosan/poly（ethylene glycol） （CS/PEG） composite membranes were prepared with PEG as a crosslinking reagent other than an additional blend. First, carboxyl-eapped poly（ethylene glycol） （HOOC-PEG-COOH） was synthesized. Dense CS/PEG composite membranes were then prepared by casting/evaporation of CS and HOOC-PEG-COOH mixture in acetic acid solution. Chitosan was chemically crosslinked due to the amidation between the carboxyl in HOOC-PEG-COOH and the amino in chitosan under heating, as confirmed by FTIR analysis. The hydrophilicity, water-resistance and mechanical properties of pure and crosslinked chitosan membranes were characterized, respectively. The results of water contact angle and water absorption showed that the hydrophilicity of chitosan membranes could be significantly improved, while no significant difference of weight loss between pure chitosan membranes and crosslinked ones was detected, indicating that composite membranes with amidation crosslinking possess excellent water resistanance ability. Moreover, the tensile strength of chitosan membranes could be significantly enhanced with the addition of certain amount of HOOC-PEG-COOH crosslinker, while the elongation at break didn＇t degrade at the same time. Additionally, the results of swelling behaviors in water at different pH suggested that the composite membranes were pH sensitive.     

Electroresponsive Behavior of Sulfonated Benzal Poly(vinyl alcohol) Hydrogel Under Direct-Current Electric Field

A novel sulfonated benzal poly(vinyl alcohol) (S-B-PVA) hydrogel was prepared by sulfonating benzal poly(vinyl alcohol) hydrogel with concentrated sulfuric acid, and its swelling properties, mechanical properties, and electroresponsive behavior in Na₂SO₄ solutions were studied. The results indicated that the water take-up ability of the hydrogel decreased with the increasing ionic strength of Na₂SO₄ solution. The Young's modulus, elongation at break and tensile strength of the hydrogel swollen in deionized water is 8.38 MPa, 22.2% and 3.14 MPa, respectively. The hydrogel swollen in Na₂SO₄ solution bent toward the cathode under non-contact dc electric fields, and its bending speed and equilibrium strain increased with the increasing of applied voltage. The electroresponsive behavior of the hydrogel was also affected by the electrolyte concentration of external Na₂SO₄ solution, and there is a critical ionic strength of 0.1 at which the maximum equilibrium strain of the hydrogel occurs. Under a cyclically varying electric field, the hydrogel exhibited a good reversible bending behavior.     

Preparation and characterization of novel silk fibroin/2-(N,N-dimethylamino)ethyl methacrylate based composite hydrogels with enhanced mechanical properties for controlled release of cefixime

Hydrogels with improved mechanical properties have been particularly attractive for their applications in the biomedical area including wound healing. For this purpose, a series of novel composite hydrogels based on silk fibroin (SF) and 2-(N,N-dimethylamino) ethyl methacrylate (DMAEMA) were fabricated. The swelling and mechanical tests indicated that an optimum design of hydrogel was essential to provide a high degree of water uptake, higher tensile strength and elongation at break values. Here, the S40D60 was exhibited superior swelling and strong mechanical characteristics than all the other hydrogels with different compositions. Furthermore, it was observed that the cefixime was released from the formulation of S40D60 in a sustainable manner and the drug release rate can be controlled by pH of the dissolution medium. According to these findings, it is suggested that the optimal formulation of S40D60 would be effectively performed in situ drug therapy for wound healing.     

Preparation of Polyvinyl Pyrrolidone-Based Hydrogels by Radiation-Induced Crosslinking with Potential Application as Wound Dressing

Polyvinyl pyrrolidone/polyethylene glycol hydrogels (PVP/PEG) and PVP/PEG/Starch were prepared by irradiating the mixtures of aqueous solutions of PVP, PEG and starch with electron beam at different doses. Their properties were evaluated to identify their usability in wound dressing applications. The physical properties of the prepared hydrogels, such as gel content, swelling, water content and degree of water evaporation with varying composition and irradiation dose were examined to evaluate the usefulness of the hydrogels for wound dressing. The gel content increases with increasing PVP concentration due to increased crosslink density, and decreases with increasing the PEG concentration. PEG seems to act not only as plasticizer but also to modify the gel properties as gelation% and maximum swelling. Mechanical experiments were conducted for both PVP/PEG and PVP/PEG/Starch. The adding of PEG and starch to PVP significantly improves elongation and tensile strength of prepared hydrogels, respectively. The crystallinity of both prepared hydrogels was investigated with varying their components, XRD studies indicated that the crystallinity in the gel was mainly due to PVP and mainly decreased with enhanced starch content. The prepared hydrogels had sufficient strength to be used as wound dressing and could be considered as a good barrier against microbes.     

Ideal tetrafunctional amphiphilic PEG/PDMS conetworks by a dual‐purpose extender/crosslinker. II. Characterization and properties of water‐swollen membranes

Select characteristics and properties of a series of ideal tetrafunctional amphiphilic conetworks consisting of random poly(ethylene glycol) (PEG) and polydimethylsiloxane (PDMS) segments crosslinked by a novel dual‐purpose crosslinker/extender were determined. The overall composition of the conetworks was varied in the 16–40% PEG range, and membranes were prepared by polymerizing/crosslinking charges in molds. Membranes were characterized by equilibrium swelling (both in water and n‐heptane) and by determining their oxygen permeabilities and select mechanical properties. Swelling in water increases, whereas in heptane it decreases with increasing PEG content. Significant swelling in both solvents indicates bicontinuous (bipercolating) PEG and PDMS phases. Bicontinuity is reached with ～13% PEG in the conetworks. The oxygen permeabilities of optically clear water‐swollen membranes containing 24, 32, and 40 wt % PEG are ～350, ～245 and ～185 barrers, respectively, i.e., oxygen permeability decreases by increasing the hydrophilic constituent. These oxygen permeabilities are far superior to those of contemporary soft contact lenses. The tensile strengths and moduli of water‐swollen membranes decrease, while elongations increase, with increasing PEG content. Dry membranes exhibit first order transitions at ?52 and ～46 °C indicating phase‐separated crystalline PDMS and PEG domains, respectively. Both dry and water‐swollen membranes are optically clear, indicating the presence of PEG and PDMS domains with dimensions well below the wavelength of visible light. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4965–4971, 2005     

丝素蛋白-聚氨酯复合水凝胶的制备及性能研究

以聚乙二醇(PEG)、聚氧化丙烯二醇(PPG)、异弗尔酮二异氰酸酯(IPDI)为主要原料制备聚氨酯预聚体(PU),与丝素蛋白水溶液(SF)交联制得丝素蛋白-聚氨酯(SF-PU)复合水凝胶.分别利用ATR、SEM对水凝胶组成、结构及微观形貌进行表征;DSC、吸水溶胀测试探讨了丝素蛋白与聚氨酯的质量比(SF/PU)以及聚氨酯中不同软段质量比(PEG/PPG)对SF-PU水凝胶热性能、溶胀性能的影响.结果表明,SF-PU水凝胶具有多孔结构;样品中不同的SF/PU、PEG/PPG均对材料的玻璃化转变温度、结晶度及溶胀性能产生影响,且当水凝胶组分为SF/PU=1/25、PEG/PPG=2/1时,平衡溶胀比(ESR)可达到440%;水凝胶在溶胀初始阶段符合菲克扩散模型,整个溶胀过程遵循溶胀动力学2级方程.     

Semi‐interpenetrating polymer networks composed of poly(N‐isopropyl acrylamide) and polyacrylamide hydrogels

Three series of semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropyl acrylamide) (PNIPA) and 1 wt % nonionic or ionic (cationic and anionic) linear polyacrylamide (PAAm), were synthesized to improve the mechanical properties of PNIPA gels. The effect of the incorporation of linear polymers into responsive networks on the temperature‐induced transition, swelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with various molar ratios (25:1 to 100:1) of the monomer (N‐isopropyl acrylamide) to the crosslinker (methylenebisacrylamide). The hydrogels were characterized by the determination of the equilibrium degree of swelling at 25 °C, the compression modulus, and the effective crosslinking density, as well as the ultimate hydrogel properties, such as the tensile strength and elongation at break. The introduction of cationic and anionic linear hydrophilic PAAm into PNIPA networks increased the rate of swelling, whereas the presence of nonionic PAAm diminished it. Transition temperatures were significantly affected by both the crosslinking density and the presence of linear PAAm in the hydrogel networks. Although anionic PAAm had the greatest influence on increasing the transition temperature, the presence of nonionic PAAm caused the highest dimensional change. Semi‐interpenetrating polymer networks reinforced with cationic and nonionic PAAm exhibited higher tensile strengths and elongations at break than PNIPA hydrogels, whereas the presence of anionic PAAm caused a reduction in the mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3987–3999, 2004     

Mechanical, thermal and degradation properties of poly(d,l-lactide)/poly(hydroxybutyrate-co-hydroxyvalerate)/poly(ethylene glycol) blend

The mechanical, thermal and biodegradable properties of poly(d,l-lactide) (PDLLA), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(ethylene glycol) (PEG) blends were studied. The influence of PEG on the tensile and impact strengths of the blends was investigated. The results showed that the toughness and elongation at break of the PDLLA/PHBV (70/30) blends were greatly improved by the addition of PEG, and the notched Izod impact strength increased about 400% and the elongation at break increased from 2.1% to 237.0%. The thermal and degradation properties of the blends were investigated by differential scanning calorimeter (DSC) and thermogravimetric analyzer (TGA), it was found that the thermal stability of PHBV in the presence of PDLLA was improved. The degradation test showed that the addition of PEG could notably accelerate the biodegradation of the blends in the soil at room temperature, and the mass loss is about 20% after 30 days of the storage.     

Synthesis and characterization of a multiblock copolymer of poly(N-isovaleryl ethyleneimine) and poly(ethylene glycol)

Block copolymers of poly(N-isovaleryl ethyleneimine) (PiVEI) and poly(ethylene glycol) (PEG) were synthesized by coupling previously prepared blocks of PEG ditosylate with the dianion of the dihydroxy PiVEI. On the average four blocks coupled together to form the final block polymer. The PiVEI blocks crystallized with the same melting points as in the homopolymer. This restricted the mobility of the PEG blocks and they did not crystallize unless cooled well below room temperature. The mechanical properties of cast films were quite good with a tensile strength of 77 kg/cm² and an elongation of 120%. The swelling of unoriented and oriented films with water was studied. The unoriented polymer absorbed about its own volume of water, even though PEG comprised only 40% of the total polymer.     

Mathematical Model for Surface‐Initiated Photopolymerization of Poly(ethylene glycol) Diacrylate

Summary: A general mathematical model has been developed to describe the surface initiated photopolymerization of PEG‐DA forming crosslinked hydrogel membranes upon the surface of a substrate. Such membranes are formed by photopolymerizing a PEG‐DA prepolymer solution by initiation with eosin‐Y‐functionalized surfaces and TEA using VP as accelerator. Experimental measurements of the thickness of hydrogel membranes compare well with the model. The model is developed by using the pseudo‐kinetic approach and the method of moments, and is capable of predicting the crosslink density and thickness of the hydrogel membrane. Parametric sensitivity of the effects of PEG‐DA, VP and coinitiator TEA concentration towards the crosslink density and the thickness of the hydrogel is also investigated. The results obtained for different PEG‐DA and VP concentrations suggest that the concentration ratio of these two monomers is a key parameter in controlling the gel thickness and permeability. This model can also be applied to systems where drugs, proteins or cells are encapsulated through surface initiated photopolymerization to predict the growth and crosslink density profiles of the encapsulating membrane. In a previous study we have experimentally demonstrated that these membranes could be made to attach covalently to the surface of the underlying substrate.

Comparison of experimental measurements and model simulation of PEG‐DA hydrogel membrane thickness versus laser duration at high PEG‐DA concentrations.     

Chemical–physical behavior of hydrogels of poly(vinyl alcohol) and poly(ethylene glycol)

New hydrogels based on polyethylene glycol (PEG) and poly(vinyl alcohol) (PVA) of different degrees of hydrolysis were synthesized. To form the network the PEG was modified at their ends with acyl chloride groups to be used as the crosslinking agent. The compositions of the hydrogels were between 50% and 90% by weight of PEG and PVA of various degrees of hydrolysis were used. It was found that the degree of hydrolysis of the PVA and the PEG content influence the equilibrium water content of the hydrogel. The process of swelling of all the hydrogels prepared followed a second-order kinetics.     

A new polymer/clay nano-composite hydrogel with improved response rate and tensile mechanical properties

A new type of stimuli-responsive organic/inorganic nano-composite hydrogel was prepared by introducing fibrillar attapulgite into poly(2-hydroxyethyl methacrylate-co-poly(ethylene glycol) methyl ether methacrylate-co-methacrylic acid) network, in which the nanosized attapulgite fibril worked as the cross-linker instead of conventional chemical cross-linker. In the preparation process, a prepolymerization route was adopted to effectively stabilize the dispersion of attapulgite. The structure and morphology of the nano-composite hydrogels were characterized by SEM, FTIR and DSC. The swelling/deswelling behaviors and tensile mechanical properties of the nano-composite hydrogels were compared with that of the corresponding chemically cross-linked hydrogel. The results showed that the nano-composite hydrogels had much greater equilibrium-swelling ratio, much faster response rate to pH and significantly improved tensile mechanical properties. As the content of AT increased, the tensile strength, effective cross-link chain density and glass transition temperature increased, while the equilibrium swelling ratio, deswelling rate and elongation at break decreased.     

Blood compatibility of novel poly(gamma-glutamic acid)/polyvinyl alcohol hydrogels

Sodium poly(gamma-glutamic acid) (PGA), a water-soluble and biodegradable polypeptide, was reacted with polyvinyl alcohol (PVA) to form hydrogel without any chemical treatment. The gelation occurred probably due to physical cross-linking of polymer chains by interpenetrating hydrogen bonding. From the results of thermal analysis, PGA/PVA exhibited better thermal stability than native PVA. Although the swelling ratio decreased with the increase of PGA content, however, the water resistance and retention were improved. The tensile strength of the PGA/PVA hydrogel membranes was about 15-30% lower than that of the native PVA, whereas the elongation was increased 2.0-2.6 times. The amount of protein adsorbed and platelets adhered on the PGA/PVA membranes were significantly curtailed with increasing PGA content, thereby showing improved blood compatibility. The as-fabricated hydrogels were proven to be non-cytotoxic evaluated in vitro by L-929 fibroblast incubation. Overall results demonstrate that the non-cytotoxic PGA/PVA hydrogels, due to better water resistance, mechanical properties and blood compatibility could be very promising candidates for blood-contacting medical devices.     

羧甲基纤维素钠/聚(N-异丙基丙烯酰胺)纳米复合水凝胶的制备及结构性能表征

以无机粘土为交联剂制备了具有温度、pH双重敏感特性的羧甲基纤维素钠/聚(N-异丙基丙烯酰胺)/粘土半互穿网络纳米复合水凝胶(CMC/PNIPA/Clay semi-IPN),并通过红外和透射电镜对其结构和形态进行了表征。在酸性(pH=1.2)和20℃条件下,分别研究了温度和不同pH缓冲液对该凝胶溶胀度的影响,测定了复合水凝胶的力学性能。结果表明:水凝胶中的粘土被剥离成单片层,且均匀分散在凝胶网络中,起交联剂的作用,而CMC以线性大分子的形态存在;CMC/PNIPA/Clay具有良好的温度、pH双重敏感特性;凝胶的断裂伸长率>1 000%。