The extraction equilibrium of uranium(VI) with i-butyldodecylsulfoxide (BDSO)

The i-butyldodecylsulfoxide (BDSO) was synthesized. The extraction of uranium(VI) has been carried out with BDSO in toluene from various HNO₃ concentrations. It was found that the distribution ratio increases with increasing nitric acid concentration up to 3.0 mol/l and then decreases. The distribution ratios also increase with increasing extractant concentration. The extracted species appears to be UO₂(NO₃)₂·2BDSO and the equilibrium constant value is 15.2. The influence of temperature, sodium nitrate and oxalate concentrations on the extraction was also investigated, and the thermodynamic functions of the extraction reaction were obtained.This revised version was published online in November 2005 with corrections to the Cover Date.     

Liquid-liquid extraction of uranium(VI) with 2-ethylhexyltolylsulfoxide (EHTSO)

The liquid-liquid extraction behavior of 2-ethylhexyltolylsulfoxide (EHTSO) towards uranium(VI) contained in nitric acid aqueous solution has been investigated. It was found that the extraction increases with increasing nitric acid concentration up to 5.0 mol/l and then decreases. Extraction also increases with increasing extractant concentration. The extracted species appears to be UO₂(NO₃)₂ ^.2EHTSO. The influences of temperature, NH₄NO₃ and Na₂C₂O₄ concentrations on the extraction equilibrium were also investigated and the thermodynamic functions of the extraction reaction were obtained.     

Extraction of uranium(VI) by bis(hexylsulfinyl)methane

The extraction of uranium(VI) with bis(hexylsulfinyl)methane (BHxSM) from nitric acid aqueous solution has been investigated. It was found that the extraction increased with increasing nitric acid concentration up 8.5 mol/l and then decreased. Extraction distribution ratio also increased with the bis(hexylsulfinyl)methane concentration. The extraction species appear to be UO₂(NO₃)₂ ^.2BHxSM. The influences of temperature, salting-out concentration and oxalate concentration on the extraction equilibrium were also investigated, and the enthalpy of the extraction reaction was obtained. The result shows that the reaction of uranium(VI) extraction with BHxSM is an exothermic one.     

Liquid-liquid extraction of uranium(VI) from nitric acid solutions with bis(octylsulfinyl)ethane (BOSE)

The liquid-liquid extraction behavior of uranium(VI) from aqueous nitric acid with bis(octylsulfinyl)ethane (BOSE) in 1,1,2,2-tetrachloroethane has been studied over a wide range of conditions. The extracted species appears to be UO₂(NO₃)₂·2BOSE. It was found that the extraction increases with increasing nitric acid concentration up to 7 mol/l and then decreased. Extraction also increases with increasing extractant concentration. The influence of temperature and salting-out agent concentration on the extraction equilibrium and stripping of uranium(VI) was also investigated and the enthalpy of the extraction reaction was obtained.     

Thermodynamics of neptunium(V) complexes with phosphate at elevated temperatures

The complexation of Np(V) with phosphate at elevated temperatures was studied by a synergistic extraction method. A mixed buffer solution of TRIS and MES was used to maintain an appropriate pH value during the distribution experiments. The distribution ratio of Np(V) between the organic and aqueous phases was found to decrease as the concentrations of phosphate were increased. Stability constants of the 1:1 and 1:2 Np(V)-HPO₄ ²⁻ complexes, dominant in the aqueous phase under the experimental conditions, were calculated from the effect of [HPO₄ ²⁻] on the distribution ratio. The thermodynamic parameters including enthalpy and entropy of complexation between Np(V) and HPO₄ ²⁻ at 25 °C–55 °C were calculated by the temperature coefficient method.     

Studies on the extraction of americium(III) from aqueous nitrate media by sulfoxides

Solvent extraction behaviour of Am(III) from dilute nitric acid media with sulfoxides (R₂SO) in Solvesso-100 has been investigated over a wide range of conditions. Very poor extractability of Am necessitated the use of salting-out agents, viz., nitrates of Al, Mg, Ca, Li and NH ₄ ⁺ . Effects of certain variables such as acidity, extractant concentration, saltingout agent, temperature etc., on metal extraction by sulfoxides have been examined systematically. For a fixed sulfoxide concentration, extraction attains a maximum value up to around 0.2–0.4M HNO₃ and decreasing above 1M HNO₃. In contrast, increasing the concentration of sulfoxide (0.8M DISO, 1.3M DBuSO) gives almost quantitative Am extraction up to 1M HNO₃. For satisfactory extraction, di-n-octyl as well as di-n-hexyl sulfoxide are the most suitable extracting agents. Extractability of Am increases with increasing amounts of all the salting-out agents studied and their effect follows the sequence: Al³⁺>Mg²⁺>Ca²⁺>Li⁺>NH ₄ ⁺ ; this is also the relative dehydrating effect of the cations. The species extracted would appear to be Am(NO₃)₃.3R₂SO. Americium is easily stripped with 1–3M HNO₃ solutions from the loaded organic phase. Extraction decreases with increasing temperature, indicating the extraction to be exothermic. Extraction from partially non-aqueous solutions was also investigated.     

Liquid-liquid extraction of copper (II) with dialkyl sulphoxides

The extraction behaviour of Cu(II) from hydrochloric acid and lithium chloride solutions with di-n-pentyl sulphoxide (DPSO) and di-n-octyl sulphoxide (DOSO) has been investigated over a wide range of conditions. At a given strength of the extradant, the extraction increases with increase in HCl and LiCl concentrations. The extraction of the metal also increases with increase in extractant concentration at constant [HCl] or [LiCl]. The species extracted would appear to be CuCl₂·2DPSO/2DOSO and CuCl ₄ ²⁻ ·2DPSO. The extraction of the metal decreases with increase in initial aqueous metal concentration and also with increase in temperature. The extraction also depends on the nature of the diluent employed.     

Extraction of rhodium and iridium with 4-(non-5-yl) pyridine

The extraction of rhodium and iridium with 4-(non-5-yl)pyridine (NP) was investigated. The rate of rhodium extraction increases with increasing concentration of NP and chloride ions. Spectroscopic studies indicate that the extracted species is an ion pair, RhCl^3?₆ 3HNP⁺. Under the conditions of optimum Rh extraction ([Cl^?]=3.7 M, [NP]=0.3 M, [H]=0.08 M), iridium is also extracted by NP with similar efficiency in the form of IrCl^3?₆ 3HNP⁺. The use of hypophosphorous acid to labilize rhodium results in a better extraction of rhodium without significantly changing the extraction of iridium. The efficiency and kinetics of the rhodium extraction improve with increasing chloride concentration. For [Cl^?] ? 3.7 M, [H₃PO₂]=2.5 M, [NP]=0.3 M and Ph ≈ 1.6, 82% of rhodium is extracted in 4 min and 95% in 30 min.     

The Extraction of Uranium(VI) with n-Octyldecylsulfoxides (ODSO)-Toluene

The liquid-liquid extraction of uranium(VI) from aqueous nitric acid with n-octyldecylsulfoxide (ODSO) in toluene has been studied over a wide range of conditions. The extracted species appears to be UO₂(NO₃)₂·2ODSO. The extraction increased with increasing nitric acid concentration up to 2.0 mol/l and then decreased. Extraction also increased with increasing extractant concentration. The influence of temperature, salting-out agent concentration and complex anion concentration on the extraction equilibrium were also investigated, and the enthalpy of the extraction reaction was calculated.     

Solvent extraction of uranium(VI) by p-tert-butylcalix[n]-arene acetate

The solvent extraction of U(VI) by p-tert-butylcalix[n]-arene acetate (H _n L) (n=4, 6, 8) has been studied. The effects of acidity in aqueous phase and concentration of extractant in organic phase on the distribution ratio were examined. It has been found that the distribution ratio is proportional to [H⁺]⁻² and [H _n L]_(O) and the extracted complex species is UO₂H _n ⁻²L. The equilibrium constants of the extraction reactions have been determined. The reaction mechanism is discussed.     

Liquid-liquid extraction of molybdenum(VI) and uranium(VI) by LIX 622

The order of extraction of Mo(VI) from 1M acid solutions by 5% (v/v) LIX 622 (HL) in benzene is HCl>HNO₃>HClO₄>H₂SO₄, and extraction decreases with increasing concentration of HCl and H₂SO₄, and increases slightly with increasing concentration of HNO₃ and HClO₄. The extracted species is shown to be MoO₂L₂ as established by IR data of organic extracts and the extracted species in the solid form. Extraction is almost quantitative at and above 10% LIX 622, and is found to be independent of [Mo(VI)] in the range of 10^–4 to 10^–3 M. The diluents CCl₄, CHCl₃ and C₆H₆ are found to be superior to solvents of high dielectric constant for extraction of Mo(VI). Extraction of uranium(VI) by 10% (v/v) LIX 622 in benzene was found to increase with increasing equilibrium pH (3.0 to 6.0), and becomes quantitative at pH 5.9. Tributyl phosphate acts as a modifier up to 2% (v/v). Thorium(IV) is almost not extracted by LIX 622 or its mixture. Separation of Mo(VI) and U(VI) is feasible.     

Extraction of uranium(VI) from nitric acid medium by 1.1M tri-n-butylphosphate in ionic liquid diluent

Summary A systematic study on the extraction of U(VI) from nitric acid medium by tri-n-butylphosphate (TBP) dissolved in a non-traditional diluent namely 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF₆) ionic liquid (IL) is reported. The results are compared with those obtained using TBP/n-dodecane (DD). The distribution ratio for the extraction of U(VI) from nitric acid by 1.1M TBP/bmimPF₆ increases with increasing nitric acid concentration. The U(VI) distribution ratios are comparable in the nitric acid concentration range of 0.01M to 4M, to the ratios measured using 1.1M TBP/DD. In contrast to the extraction behavior of TBP/DD, the D values continued to increase with the increase in the concentration of nitric acid above 4.0M. The stoichiometry of uranyl solvate extracted by 1.1M TBP/IL is similar to that of TBP/DD system, wherein two molecules of TBP are associated with one molecule of uranyl nitrate in the organic phase. Ionic liquid alone also extracts uranium from nitric acid, albeit to a small extent. The exothermic enthalpy accompanying the extraction of U(VI) in TBP/bmimPF₆ decreases with increasing nitric acid and with TBP concentrations.     

Extraction of rare earth elements with 1-(diphenylphosphorylmethoxy)-2-diphenylphosphoryl-4-ethylbenzene with the use of 1,1,7-trihydrododecafluoroheptanol as a solvent

Extraction of rare earth elements from nitric acid solutions in a 1,1,7-trihydrododecafluoroheptanol-water system with the use of phosphoryl-containing podand 1-(diphenylphosphorylmethoxy)-2-diphenylphosphoryl-4-ethylbenzene (L) was studied. The content of metals in organic phase was shown to be negligible at nitric acid concentration lower 1 mol/L. Distribution ratio sharply increases with nitric acid concentration from 1 mol/L and reaches 5.5 for the yttrium subgroup elements at HNO₃ concentration of 6 mol/L. The rare earth elements of the yttrium subgroup were found to be extracted much better than the rare earth elements of the cerium subgroup under the same conditions, the distribution ratios in both subgroups smoothly rise with atomic number of element. It was shown using the shift of extraction equilibrium that the M: L ratio in extracted complexes is 1: 2 irrespective of the nature of rare earth element. The structure of complex {Yb[η²-(O,O′)-L]₂(η²-O₂NO)₂}(O₂NOHNO₃), whose single crystals were isolated from extraction solution, was established by X-ray diffraction study. The system can be used for the isolation and separation of rare earth elements.     

Solvent extraction of Tc(VII) by the mixture of TBP and 2-nitrophenyl octyl ether

The extraction of Tc(VII) by the mixture of tri-n-butyl phosphate (TBP) and 2-nitrophenyl octyl ether (NPOE) has been studied. 0.2M NPOE-TBP can extract Tc(VII) effectively from 1M HNO₃ and 1M NaOH solutions with distribution ratios of 57.1 and 12.3, respectively. The distribution ratio of Tc(VII) decreases with increasing (>0.5M) HNO₃ concentration but increases with the increase of NaOH concentration. A pH 9 NaOH solution has proven to be suitable for Tc(VII) stripping. A simple extraction-stripping cycle can remove Tc(VII) from a sodium hydroxide solution. A more sophisticated extraction process is proposed to remove Tc(VII) from nitric acid solution because the co-extracted HNO3 prevents the direct stripping of Tc(VII) by NaOH solution of pH 9.     

Extraction of uranium(VI) with bis(octylsulfinyl)methane

The liquid-liquid extraction of uranium(VI) from aqueous nitric acid with bis(octylsulfinyl)methane (BOSM) has been studied over a wide range of conditions. The extracted species appear to be UO₂(NO₃)₂·2BOSM. It was found that the extraction increased with increasing nitric acid concentration up to 8.5 mol/l and then descreased. Extraction also increased with increasing extractant concentration. The influence of temperature and salting-out agent concentration on the extraction equilibrium has also been investigated, and the enthalpy of the extraction reaction was estimated.     

The effect of tin(II) chloride on the liquid-liquid extraction of tetrachloroplatinate(II) ions by triphenylphosphine in dichloromethane

The effect of tin(II) chloride on the extraction of tetrachloroplatinate(II) in 1.0–1.5 M HCl into dichloromethane with triphenylphosphine (TPP) is described. Tin(II) chloride dramatically increases the rate and efficiency of platinum extraction. The percentage of platinum extracted depends in a complicated way on the time allowed for extraction, the Pt:Sn(II) ratio, the Pt:TPP ratio, and to a lesser extent to the hydrochloric acid concentration. Tin is initially extracted into the organic phase, probably as [Pt(SnCl₃)Cl(PPh₃)₂], but is subsequently back-extracted into the aqueous phase, as a result of the relatively slow disproportionation reaction: [Pt(SnCl₃)Cl(PPh₃)₂]_org + cl^? ? [Pt(PPh₃)₂Cl₂]_org + SnCl^?₃.     

The solvent extraction of UO 2 2+ and Th4+ with petroleum sulfoxide

The influence of the concentration of nitric, hydrochloric and phosphoric acids, petroleum sulfoxides (PSO), salting-out agent, kind of diluent and temperature on the distribution ratio of U(VI) and Th(IV) has been systematically studied. It is found that the extraction regularity of PSO is similar to that of TBP. The distribution ratio in phosphoric acid is lower, but it increases with the increase of hydrochloric acid concentration and reaches a high value. The U(VI) exhibits the maximum distribution ratio at 3–4 mol/l HNO₃. The distribution ratio of U(VI) and Th(IV) increases rapidly in the presence of a salting out agent. The extracted compounds are determined to be UO₂(NO₃)₂2PSO and Th(NO₃)₄2PSO. The extraction enthalpies of U(VI) and Th(IV) with PSO were also calculated.     

Extraction and thermodynamic behavior of U(VI) and Th(IV) from nitric acid solution with tri-isoamyl phosphate

The extraction behavior of U(VI) and Th(IV) with tri-isoamyl phosphate–kerosene (TiAP–KO) from nitric acid medium was investigated in detail using the batch extraction method as a function of aqueous-phase acidity, TiAP concentration and temperature, then the thermodynamic parameters associated with the extraction were derived by the second-law method. It could be noted that the distribution ratios of U(VI) or Th(IV) increased with increasing HNO₃ concentration until 6 or 5 M from 0.1 M. However, a good separation factor (D _U(VI)/D _Th(IV)) of 88.25 was achieved at 6 M HNO₃, and the stripping of U(VI) from TiAP–KO with deionized water or diluted nitric acid was easier than that of Th(IV). The probable extracted species were deduced by log D-log c plot at different temperatures as UO₂(NO₃)₂·(TiAP)_(1–2) and Th(NO₃)₄·(TiAP)_(2–3), respectively. Additionally, △H, △G and △S for the extraction of U(VI) and Th(IV) revealed that the extraction of U(VI) by TiAP was an exothermic process and was counteracted by entropy change, while the extraction of Th(IV) was an endothermic process and was driven by entropy change.     

Synergistic extraction of uranium(VI) with mixtures of bis(hexylsulfinyl)ethane (BHxSE) and petroleum sulfoxides (PSO)

The synergistic extraction of uranium(VI) from aqueous nitric acid solution with mixtures of bis(hexylsulfinyl)ethane (BHxSE) and petroleum sulfoxides (PSO) in 1,1,2,2-tetrachloroethane was studied. It has been found that the maximum synergistic extraction effect occurs when the molar ratio of PSO to BHxSE is close to 1. The composition of the complex of synergistic extraction was estimated as UO₂(NO₃)₂ ^.BHxSE^.PSO. The formation constant of the complex was equal to K_BP = 4.23±0.03. The effects of extractant, nitric acid, salting-out agent, and complex anion concentrations and temperature on the extraction equilibrium of uranium(VI) were also studied.     

Properties and Extraction for [Ni(NH3)6]2+ of ATPS-a Formed by Aqueous Cationic–Anionic Surfactant Mixtures

The properties and extraction for [Ni(NH₃)₆]²⁺ of anionic aqueous two-phase systems (ATPS-a) that formed in mixtures of cetyltrimethylammonium bromide (CTAB) and excess sodium dodecyl sulfate (SDS) aqueous solutions were investigated. The results showed that the properties and extraction effects were strongly affected by the surfactant concentration, the temperature of system, and the mole fraction of surfactants. The increase of temperature induces narrower phase region and larger phase volume ratio. In addition, [Ni(NH₃)₆]²⁺ was extracted into the surfactant-rich phase with higher distribution coefficient when the liquid crystal had the birefringent properties. Moreover, the distribution coefficient can be improved through reducing the concentration of surfactant from 0.15 to 0.05 mol · L^?1 or increasing mole fraction of CTAB from 21.9% to 23.1%. The results showed that ATPS of cationic–anionic surfactants was efficient for [Ni(NH₃)₆]²⁺ extraction with distribution coefficients of 13.5 when the total surfactant concentration was 0.05 mol · L^?1, mole fraction of CTAB was 21%, and temperature was 34°C.