Thermal transport in the oxygenated magnetic superconductor, Eu1.5Ce0.5RuSr2Cu2O10+δ

The thermal conductivity and thermopower are reported for a hole doped Eu_1.5Ce_0.5RuSr₂Cu₂O_10+δ sample that has been annealed at 1100 K under an oxygen pressure of 54 atm. At T_c=45 K superconductivity and weak ferromagnetism coexist (T_m=180 K). Weak features in the thermopower, S(T), and thermal conductivity, κ(T), are observed both at T_m and at T^*=140 K. The thermopower begins to decrease sharply toward zero at T_c, and there is an extremely sharp increase of about 30% in the thermal conductivity at T_c. This “first order” transition may be related to the sudden appearance of a spontaneous vortex phase at T_c. A small shoulder is observed in κ(T) in the temperature range T=5–13 K.     

Laser ablated bismuth cuprate thin films preparation and effect of oxygen nonstoichiometry upon superconductivity

Thin films of Bi₂Sr₂CaCu₂O₈ and (Bi, Pb)₂Sr₂Ca₂Cu₃O₁₀ have been prepared on monocrystalline (100) MgO substrates, using a laser ablation method with post annealing treatment. The influence of substrate temperature and oxygen pressure during deposition were investigated. SEM observations, EDS analysis, electric and magnetic measurements have been used to characterize the films. Superconducting “2212” films, with T_c(R = 0) at 80–83 K and J_c (50 K) up to 5 × 10⁵ A/cm², have been currently achieved, while Pb-doped “2223” films exhibit T_c as high as 110 K with J_c = 5 × 10⁴ A/cm² at 77 K. The effect of annealing at low temperature (350°C) in an argon flow has been studied for the 2212 phase, it shows the influence of the oxygen non-stoichiometry, i.e. of the hole carrier density upon T_c's which can be measured up to 89 K (zero resistance).     

High critical current density YBa2Cu3O7−δ tapes prepared by the surface-oxidation epitaxy method

YBa₂Cu₃O_7−δ (YBCO) films with high critical current density (J_c) were successfully fabricated on nickel tapes buffered with epitaxial NiO. NiO was prepared on the textured nickel tape by the surface-oxidation epitaxy (SOE) method. We have reported so far a critical temperature (T_c) of 87 K and J_c=4–6×10⁴ A/cm² (77 K, 0 T) for the YBCO films on NiO/Ni tapes. To enhance the superconducting properties of the YBCO films on the SOE-grown NiO, depositions of thin oxide cap layers such as YSZ, CeO₂, and MgO on NiO were investigated. These oxide cap layers were epitaxially grown on NiO and provided the template for the epitaxial growth of YBCO films. Substantially improved data of T_c=88 K and J_c=3×10⁵ A/cm² (77 K, 0 T) and 1×10⁴ A/cm² (77 K, Hc, 4 T) were obtained for YBCO film on NiO, by using a MgO cap layer with a thickness of 50 nm. The method described in this paper is a simple way to produce long YBCO tape conductors with high-J_c values.     

Temperature dependence of the critical current in YBa2Cu3O7−δ and Bi2Sr2Ca1Cu2O8 Josephson junctions

We have studied the stationary Josephson effect on YBa₂Cu₃O_7−δ (T_c=90 K) and Bi₂Sr₂Ca₁Cu₂ O₈ (T_c=80 K and 87 K for two samples of different origin) ceramic based junctions. The temperature dependence of the critical current near T_c has been found as I_c≈(T_c-T) for the Y-Ba-Cu-O samples indicating that they should be classified as S-N-I-N-S type junctions. The I-V curves of the Bi-Sr-Ca-Cu samples show the typical behaviour of S-I-S structures. Using Ambegaokar-Baratoff's theory for Bi₂Sr₂Ca₁Cu₂O₈, the temperature dependence of the superconducting state gap Δ(T) was calculated and it was evaluated that 1.452Δ(0)/k_BT_c3.5.     

Realization and properties of ramp-type YBa2Cu3O7−δ/Au/Nb junctions

All-thin-film ramp type Josephson junctions between YBa₂Cu₃O_7−δ and Nb have been fabricated. This procedure allows connections between high-T_c and low-T_c superconductors at different crystal sides of the high-T_c superconductor on one chip, which is of great interest for novel phase devices. A thin Au layer is incorporated as a chemical barrier to avoid oxygen transfer from the YBa₂Cu₃O_7−δ to the Nb. Critical current densities up to 600 A/cm² are obtained at T=4.2 K, with typical R_nA values of 0.8 μΩ cm². The variation of the magnetic field dependence of the critical current with the angle between the junction barrier and the YBa₂Cu₃O_7−δ crystal axes is explained by considering a predominant d_x²−y² order parameter symmetry of the YBa₂Cu₃O_7−δ. The successful fabrication of these junctions allows the implementation of novel superconducting electronics, such as complementary Josephson circuitry or proposed qubit concepts, using the unconventional order parameter symmetry of the high-T_c superconductor.     

Field-induced parameters of re-entrant magnets and concentrated spin glasses

We have used electron spin resonance measurements to derive the temperature and frequency dependences of the field-induced magnetization [M(T, f)] and anisotropy field [H_an (T)] in a number of amorphous alloys belonging to the series (Fe_pNi_1−p)₇₅P₁₆B₆Al₃. In re-entrant (p > p_c, the critical concentration for ferromagnetism) alloys at hi gh frequencies (f = 35 GHz, field ≈ 12 kOe) M reduces as T^3/2 at high T and as T below ≈ 40 K, the deviation from T^3/2 becoming more marked as p → p⁺_c. For p close to p_c, lowering the frequency first causes the T term to increase and ultimately ( ≈ 4 GHz) changes the variation of M with T to that discovered previously for concentrated spin glasses, namely M is constant at low T and drops linearly at high temperatures. For the re-entrants, the results are interpreted on the basis of a model which invokes an energy gap in the spin-wave spectrum, introduces a non-zero density of states of the gap energy and takes into consideration a low-q cut-off in the spin-wave integral in thelow-T (T) regime.In the concentrated spin glasses [M (0) - M (T)]/ M (0) is well represented by the function [exp (Δ / T) - 1]^-1, where Δ has values close to the corresponding Curie-Weiss temperatures θ_p but much larger than the respective spin glass transition temperatures T_SG. The temperature dependence of H_an is largely given by the function (1 - T/T^*), where T^* is equal to the zero-field freezing temperature for the re-entrants and T_SG for the spin glasses, respectively.     

Intergranular properties of YBCO and BSCCO ceramic superconductors at low fields

Isothermal low-field AC susceptibility measurements have been used to analyze the intergranular critical current density J_c(T) on sintered, non-oriented YBa₂Cu₃O_7−δ and Bi₂Sr₂CaCu₂O_8+δ ceramic samples at zero field. Below the critical temperature, potential variations, J_c(T) ≈ (1−t_j)^m with t_j = T/T_j, have been found, T_j being the onset of grain's coherence, but with different exponents, supporting that different mechanisms limit the intergranular J_c values. Moreover, the effect of texture has been also considered on Bi₂Sr₂CaCu₂O_8+δ ceramics grown by the laser floating zone method, which have stronger intergranular junctions. Their high-temperature behaviour is limited by intrinsic effects, while at low temperatures the quality of the junctions is the limiting factor. The temperature dependence of the χ′(h₀) extrapolation at zero filed has also been correlated with the evolution of the intergranular penetration depth, λ_J(T).     

Influence of fluctuations on thermal conductivity of high-Tc YBa2Cu3O7−δ superconductor

To study a behavior of the thermal conductivity near T_c specific heat and thermal diffusivity of the YBa₂Cu₃O_7−δ high-T_c ceramics were simultaneously measured. Close to T_c = 92.30 K the thermal diffusivity and the thermal conductivity discovered minima and the specific heat – maximum. Quantitative analysis of the influence of thermodynamical fluctuations showed the same power laws with Gaussian exponent equal to 0.5 and existing of crossover from the 3D Gaussian to 3D XY critical behavior in the specific heat and thermal conductivity at the approach to T_c. To explain the minimum in thermal conductivity at T_c we propose a mechanism of scattering of phonons on the superconducting fluctuations.     

Magnetic properties of the Bi1.95Sr2.05−xLaxCuOy (Bi-2201) superconducting phase

We have investigated the reversible mixed-state magnetization M of three lanthanum substituted Bi_1.95Sr_2.05−xLa_xCuO_y (Bi-2201) ceramic samples having different critical temperatures T_c ranging from 20.0 to 35.5 K. As for the Bi₂Sr₂CaCu₂O_8+δ (Bi-2212) phase, we found that anisotropy of Bi-2201 is large. A manifestation of this anisotropy is the field independent magnetization M^* observed at a temperature T^*. In the framework of the London model, and including thermal fluctuations of vortices, we found for the temperature dependence of the penetration depth λ_ab(T) = λ_ab(0)[1 − (T/T_c0)ⁿ]^−1/2, with n 1.7 and λ_ab (T = 0) 4000 Å. The estimated upper critical fields μ₀H_c2,c are of the order of 10 T. We observe a peculiar negative slope M/T at low temperature and sufficiently high external magnetic field. This feature seems to be a characteristic of the Bi-2201 phase. However, we do not know whether it is associated with the superconducting mixed-state. A small amount of magnetic impurities could also be responsible for this behavior. Finally, the behavior of the reversible magnetization of the Bi-2201 samples investigated, which are situated at the optimal and in the overdoped region, did not indicate any unusual temperature dependence for the upper critical field H_c2,c.     

Influence of the Tl- and Hg-content on magnetic and transport properties of the Pb, Sr-doped Tl-1223 and Hg-1223 superconductors

The effects of the thallium and mercury content x on the as-sintered and post annealed samples of M_xPb_0.4Sr_1.6Ba_0.4Ca₂Cu₃O_8+δ {M: Tl (0.32≤x≤0.74) or Hg (0.18≤x≤0.68)} have been studied by magnetization and transport measurements. For Tl-1223 we have found the optimum Tl doping level to be x=0.53 regarding the grain properties, the content of superconducting phase, the first penetration field H_pl^wl, the transport (J_c^tr), magnetic intergrain (J_c^M) and intragrain (J_c^g) critical current densities. The critical temperature T_c of the as-sintered Tl-1223 sample decreased with increasing Tl content. Post-annealing in oxygen improved the T_c for Tl contents of x≥0.53 and had generally positive effects on the critical current densities. The intergrain properties of the Hg-1223 samples were much worse than those of the Tl-based superconductors.     

Systematic thermopower measurements of the thallium cuprates Tl(Ba,Sr)2Cam−1CumO2m+3−δ and Tl2Ba2Cam−1CumO2m+4+δ

The thermoelectric power (TEP) S versus temperature has been systematically investigated for several series of the superconducting cuprates Tl(Ba,Sr)₂Ca_m−1Cu_mO_2m+3−δ (m = 2, 3) and Tl₂Ba₂Ca_m−1Cu_mO_2m+4+δ (m = 1, 2, 3). The consideration of the S(T_c) curves allows two important points to be found evidence for. The first one deals with the fact that all these superconducting thallium cuprates are systematically overdoped whatever T_c, and whatever the number of Cu or Tl layers; no underdoped superconducting cuprate could be obtained. The second point shows that there exist two classes of Tl cuprates: the weakly overdoped cuprates that exhibit a T_{c max} ≥ 100 K (all the triple copper layer cuprates and the 2212 cuprates) and those which can be heavily doped that exhibit a T_{c max} ≤ 90 K (the 2201 and the 1212 cuprates). The different behavior of thallium cuprates compared to YBa₂Cu₃O_7−δ and to bismuth cuprates is discussed.     

Charge ordering in Eu3S4 determined by the valence-difference contrast of synchrotron X-ray diffraction

Synchrotron X-ray diffraction study for single crystals of Eu₃S₄ has revealed that a Th₃P₄-type structure transforms to a charge-ordered one at T_c=188.5 K. The crystal structures of Eu₃S₄ at T=300, 180 and 160 K were determined in the least-squares refinements with the Mo K intensity data. The valence-difference contrast method was applied at the L_II absorption edge of Eu, utilizing a large difference in anomalous scattering factors between Eu²⁺ and Eu³⁺. The cation distribution of Eu²⁺ and Eu³⁺ was determined by crystal-structure analyses based on the intensity data collected at two wavelengths of λ=1.6312 and 1.6298 Å.The least-squares structural refinements suggest that the most plausible atomic arrangement is [Eu³⁺]^4a[Eu²⁺Eu³⁺]^8dS₄. The charge-ordering scheme is that a half of Eu³⁺ ions occupy the whole 4a sites in the crystal structure, while the remaining half of Eu³⁺ ions mix with Eu²⁺ in the 8d sites. The scheme is also supported by the energy dependence of Bragg intensities for 400 and 004 reflections.     

Trapping mechanism of superconductivity suppression induced by Pr substitution in the Ho1−xPrxBa2Cu3O7−δ system

Pr concentration dependence of the superconducting transition temperature T_c in the Ho_1−xPr_xBa₂Cu₃O_7−δ system is determined from measurements of DC electrical resistance. This dependence coincides with that for the parallely studied Y_1−xPr_xBa₂Cu₃O_7−δ reference system. Both systems have the same value of the critical concentration x_c=0.58, in accordance with nearly equal ionic radii of Ho³⁺ and Y³⁺ ions. It has been shown that the T_c(x) curve can be described with a single mechanism based on a decreasing number of sheet holes trapped by Pr^IV-ions, if one takes also into account that the number of these ions changes with x.     

Temperature dependence of the exafs spectrum in YBa2Cu3O7−δ compounds

The temperature dependence of the extended X-ray absorption fine structure (EXAFS) is studied in the high T_c superconductors, YBa₂Cu₃O_7−δ. The measurements were done at the Cu K-edge for samples of two orthorhombic phases (T_c≈90 K and ≈58 K, respectively) and a nonsuperconducting tetragonal phase. Interatomic distances and mean square relative displacements σ² for Cu-O bonds are determined by the least squares refinement. The results indicate that values of σ² increase near T_c for both the orthorhombic samples. It is concluded that this anomalous behavior related to T_c is caused by an anomalous vibration of oxygen atoms in the Ba-O layer. Changes in the Cu-O distances from 300 to 20 K are not found.     

Critical dynamics of a stochastic n-vector model below Tc

The dynamic properties of a stochastic n-vector model are investigated for T < T_c in d=4−ε dimensions. Besides the non-conserved order parameter the model involves also the conserved densities of generators of the symmetry group O(n). We calculate the excitation spectra of those conserved densities and the transverse fluctuations of the order parameter to linear order in ε in the hydrodynamic region kξ1. The propagating modes have linear dispersion and quadratic damping in accordance with the phenomenological theory. The relaxing modes, however, exhibit non-hydrodynamic wavenumber dependence with a relaxation rate ω_k ∞ k^d/2.     

Microscopic theory of atomic and electronic stretched exponential relaxation in high temperature superconductors

Measured dimensionless room-temperature conductivity relaxation stretching fractions β in YBCO are in excellent agreement with theoretical predictions, which in 1995 identified two magic fractions, β=3/5 and β=3/7. Thus, relaxation studies provide an absolute measure of “ideality” in these complex materials, independent not only of composition x but even of crystal structure. The relaxation stretching fractions β associated with T_c itself, reported in 2000, are also explained by the magic fraction β=3/5 predicted by microscopic theory. One can infer that the interactions responsible for high-temperature superconductivity are short range, non-magnetic, and primarily associated with resonant trapping centers in semiconductive layers.     

Fabrication, microstructure and critical current density of screen-printed Ag-(Bi, Pb)2Sr2Ca2Cu3Ox superconducting tapes

The influence of the sintering conditions on the microstructure and critical current density J_c has been studied on screen-printed Ag-(Bi, Pb)₂Sr₂Ca₂Cu₃O_x tapes with a ceramics mono-layer core. Three kinds of fabrication processes, which consist of a combination of cold working (rolling and/or pressing) and sintering, are applied. Four times repetition of pressing and sintering after the pre-sintering produces the highest c-axis alignment and achieves J_c= 1.5 × 10⁴ A/cm² (77 K, 0 T). The J_c versus θ data with an angle θ between B and the c-axis elucidate the relation between the anisotropy ratio γ=J_c(Bc)/J_c(B|c and the half-height angular width Δθ of a peak for Bc. This is related to both grain alignment and the J_c value. An increase in J_c, which comes from an improvement for grain alignment, enhances γ and narrows Δθ. The J_c versus θ data are fitted to the expression J_c(B, θ)=J _c(B, 90°)/[(γ−1)|cos θ|ⁿ+1] by regarding both γ and n as adjustable parameters. Fabrication of screen-printed tapes with multilayers (1≤N≤5) is presented, where the critical current increases from 8.0 A to 30.2 A at 77 K and 0 T as N increases.     

Normal state magnetism of the high Tc cuprate superconductors

Magnetic measurements of various types have played an essential role in establishing the novel normal state characteristics of high transition temperature (T_c) superconductors with T_c > 23 K. Among these materials, the highest T_c's ( 125 K) are exhibited by the layered cuprates. In this paper, the normal state magnetic susceptibilities of the cuprates are reviewed and interpreted in the context of magnetic neutron scattering and other magnetic measurements, using the La_2−xM_xCuO₄-type and YBa₂Cu₃O_6+x-type materials as prototypical examples. The evolution of the magnetism upon doping the insulating antiferromagnetic “parent” compounds with x = 0 to form the high temperature superconductors is described. A recurrent property which differentiates these materials from conventional superconductors is the existence of strong antiferromagnetic correlations in the metallic state on the same sublattice of the structure in which the itinerant carriers reside.     

Carbon solubility and superconductivity in MgB2

Successful replacement of B by C in the series MgB_2−xC_x for values of x upto 0.3 is reported. Resistivity and ac susceptibility measurements have been carried out in the samples. Solubility of carbon, inferred from the observed change in the lattice parameter with carbon content indicates that carbon substitutes upto x=0.30 into the MgB₂ lattice. The superconducting transition temperature, T_c measured both by zero resistivity and the onset of the diamagnetic signal shows a systematic decrease with increase in carbon content upto x=0.30, beyond which the volume fraction decreases drastically. The temperature dependence of resistivity in the normal state fits to the Bloch–Gruneisen formula for all the carbon compositions studied. The Debye temperature, θ_D, extracted from the fit, is seen to decrease with carbon content from 900 to 525 K, whereas the electron–phonon interaction parameter, λ, obtained from the McMillan equation using the measured T_c and θ_D, is seen to increase monotonically from 0.8 in MgB₂ to 0.9 in the x=0.50 sample. The ratio of the resistivities between 300 and 40 K versus T_c is seen to follow the Testardi correlation for the C substituted samples. The decrease in T_c is argued to mainly arise due to large decrease in θ_D with C concentration and a decrease in the hole density of states at N(E_F).     

Study of the magnetic properties of single-crystal Ba0.6K0.4BiO3

The magnetic properties of single-crystal Ba_0.6K_0.4BiO₃ were studied. The results show that this isotropic superconductor (cubic structure with T_c ≈ 32 K) exhibits irreversibility and relaxation properties similar to those observed in the layered, high temperature superconductors. For fields above 0.1 T, an irreversibility line B_irr = B_irr (0) (1 − t)ⁿ with n = 3/2 and B_irr (0) = 20 T is observed. The comparison among several superconducting systems with different anisotropies suggests that the irreversibility line is unlikely to be the melting line for the YBa₂Cu₃O_7−δ.