Solid‐phase Total Synthesis of (−)‐Apratoxin A and Its Analogues and Their Biological Evaluation

Two approaches for the solid‐phase total synthesis of apratoxin A and its derivatives were accomplished. In synthetic route A, the peptide was prepared by the sequential coupling of the corresponding amino acids on trityl chloride SynPhase Lanterns. After cleavage from the polymer‐support, macrolactamization of 10 , followed by thiazoline formation, provided apratoxin A. This approach, however, resulted in low yield because the chemoselectivity was not sufficient for the formation of the thiazoline ring though its analogue 33 was obtained. However, in synthetic route B, a cyclization precursor was prepared by solid‐phase peptide synthesis by using amino acids 13 – 15 and 18 . The final macrolactamization was performed in solution to provide apratoxin A in high overall yield. This method was then successfully applied to the synthesis of apratoxin analogues. The cytotoxic activity of the synthetic derivatives was then evaluated. The epimer 34 was as potent as apratoxin A, and O‐methyl tyrosine can be replaced by 7‐azidoheptyl tyrosine without loss of activity. The 1,3‐dipolar cycloaddition of 38 with phenylacetylene was performed in the presence of a copper catalyst without affecting the thiazoline ring.     

Synthesis of 3‐Aryl‐2,5‐Dihydro‐1‐Benzoxepines from Phenol via Ring‐Closing Metathesis

In this paper, the synthesis of 3‐aryl‐2,5‐dihydro‐1‐benzoxepines is described. While the reaction was started from phenol and based on the sequential reactions such as Claisen rearrangement, O‐alkylation, Wittig reaction, and ring‐closing metathesis (RCM), a series of new 3‐aryl‐1‐benzoxepines were prepared in good overall yields.     

Synthesis of 4‐Vinyl‐1H‐1,2,3‐triazoles on Solid Supports via Polystyrene‐Bound But‐3‐ynyl Selenide

A facile method for solid‐phase organic synthesis of 1‐substituted‐4‐vinyl‐1,2,3‐triazoles from polystyrene‐supported but‐3‐ynyl selenide has been developed. This sequential [3+2] cycloaddition and oxidation–elimination reactions could be carried out under mild reaction conditions with straightforward operation and good yield and purity of the products, and broad scope of substrates, and could be applied in this reaction system in generation of a small library of title compounds.     

Synthesis of Tetrazino‐tetrazine 1,3,6,8‐Tetraoxide (TTTO)

This study presents the first synthesis and characterization of a new high energy compound [1,2,3,4]tetrazino[5,6‐e][1,2,3,4]tetrazine 1,3,6,8‐tetraoxide (TTTO). It was synthesized in ten steps from 2,2‐bis(tert‐butyl‐NNO‐azoxy)acetonitrile. The synthetic strategy was based on the sequential closure of two 1,2,3,4‐tetrazine 1,3‐dioxide rings by the generation of oxodiazonium ions and their intramolecular coupling with tert‐butyl‐NNO‐azoxy groups. The TTTO structure was confirmed by single‐crystal X‐ray.     

Enantioselective Total Synthesis of (+)‐Neostenine

A chirality transfer approach using acyclic polyol intermediates for the synthesis of (+)‐neostenine ( 1 ) has been developed. The sequential Overman/Claisen rearrangement of an allylic 1,2‐diol was especially useful, installing two contiguous stereocenters with complete diastereoselectivity in a one‐pot sequence. The SmI₂‐mediated cyclization and the subsequent chemoselective reduction of a lactam moiety accomplished the first enantioselective total synthesis of (+)‐neostenine ( 1 ).     

Enantioselective Total Synthesis of (+)‐Steenkrotin A and Determination of Its Absolute Configuration

The first enantioselective total synthesis of (+)‐steenkrotin A has been achieved in 18 steps and 4.2 % overall yield. The key features of the strategy entail a Rh‐catalyzed O?H bond insertion followed by an intramolecular carbonyl‐ene reaction, two sequential SmI₂‐mediated Ueno–Stork and ketyl–olefin cyclizations, and a cascade intramolecular aldol condensation/vinylogous retro‐aldol/aldol process with inversion of the relative configuration at the C7 position. The absolute configuration of (+)‐steenkrotin A was determined based on the stepwise construction of the stereocenters during the total synthesis.     

Enantioselective Total Synthesis of (+)‐Plumisclerin A

The first and enantioselective total synthesis of (+)‐plumisclerin A, a novel unique complex cytotoxic marine diterpenoid, has been accomplished. Around the central cyclopentane anchorage, a sequential ring‐formation protocol was adopted to generate the characteristic tricycle[4.3.1.0^1,5]decane and trans‐fused dihyrdopyran moiety. Scalable enantioselective La^III‐catalyzed Michael reaction, palladium(0)‐catalyzed carbonylation and SmI₂‐mediated radical conjugate addition were successfully applied in the synthesis, affording multiple grams of the complex and rigid B/C/D‐ring system having six continuous stereogenic centers and two all‐carbon quaternary centers. The trans‐fused dihyrdopyran moiety with an exo side‐chain was furnished in final stage through sequential redox transformations from a lactone precursor, which overcome the largish steric strain of the dense multiring system. The reported total synthesis also confirms the absolute chemistries of natural (+)‐plumisclerin A.     

Enantio‐ and Diastereoselective Cyclopropanation of 1‐Alkenylboronates: Synthesis of 1‐Boryl‐2,3‐Disubstituted Cyclopropanes

A novel, highly enantio‐ and diastereoselective synthesis of 1‐boryl‐2,3‐disubstituted cyclopropanes has been developed by means of the cyclopropanation of alkenylboronates with ethyl diazoacetate in the presence of catalytic amounts of a chiral copper(I) complex. The products can also be directly accessed from alkynes through an operationally simple, sequential hydroboration–cyclopropanation protocol. The resulting enantioenriched 1‐boryl‐2,3‐disubstituted cyclopropanes are versatile synthetic intermediates that undergo further transformations at the carbon–boron bond.     

An Efficient and Facile Synthesis of 5‐Amino‐3‐methyl‐7‐aryl‐1,3‐dihydroisobenzofuran‐4,6‐dicarbonitrile Derivatives Under Mild Conditions

This article describes an efficient approach for the synthesis of 5‐amino‐3‐methyl‐7‐aryl‐1,3‐dihydroisobenzofuran‐4,6‐dicarbonitrile derivatives from the reaction of aromatic aldehyde, 2‐methyltetrahydrofuran‐3‐one, and malononitrile under mild conditions. This is a simple and facile process to structure this important heterocyclic compounds. The other advantages of this approach are rapid reaction rate, high yield, and simple procedure. This article provided a good method for the synthesis of 1,3‐dihydroisobenzofuran derivatives.     

Practical Synthesis of (20S)‐10‐(3‐Aminopropyloxy)‐7‐ethylcamptothecin,a Water‐Soluble Analogue of Camptothecin

A robust, practical synthesis of (20S)‐10‐(3‐aminopropyloxy)‐7‐ethylcamptothecin (T‐2513, 5 ), which is a water‐soluble analogue of camptothecin, has been developed. The key step in this synthesis is a highly diastereoselective ethylation at the C20 position by using N‐arylsulfonyl‐(R)‐1,2,3,4‐tetrahydroisoquinoline‐3‐carboxylic acid ester as a chiral auxiliary, which affords the key intermediate ethyl‐(S)‐2‐acyloxy‐2‐(6‐cyano‐5‐oxo‐1,2,3,5‐tetrahydroindolizin‐7‐yl)butanoate ( 8 k ) in 93 % yield and 87 % de. Optically pure compound 8 k was obtained by a single recrystallization from acetone and its further elaboration through Friedlander condensation afforded compound 5 . This synthesis does not require any chromatographic purification steps and can provide compound 5 on a multi‐gram scale in 6.3 % overall yield (16 steps).     

Modular Synthesis of Novel Macrocycles Bearing α,β‐Unsaturated Chemotypes through a Series of One‐Pot,Sequential Protocols

A series of one‐pot, sequential protocols was developed for the synthesis of novel macrocycles bearing α,β‐unsaturated chemotypes. The method highlights a phosphate tether‐mediated approach to establish asymmetry, and consecutive one‐pot, sequential processes to access the macrocycles with minimal purification procedures. This library amenable strategy provided diverse macrocycles containing α,β‐unsaturated carbon‐, sulfur‐, or phosphorus‐based warheads.     

Synthesis of 8‐Desoxythunberginol A and (±)‐8‐Desoxy‐3,4‐Dihydrothunberginol A

A two step synthesis of title isocoumarin isolated from Homalium longifolium and its conversion into corresponding 3,4‐dihydroisocoumarin has been described. 3,4‐Dimethoxybenzoyl chloride on condensation with homophthalic acid afforded 3‐(3′,4′‐dimethoxyphenyl)isocoumarin which was demethylated to furnish the 8‐desoxythunberginol A, whereas its sequential saponification, reduction and demethylation yielded the (±)‐8‐desoxy‐3,4‐dihydrothunberginol A. The synthesized compounds were examined in vitro for antibacterial activity.     

Chemical Synthesis of the 20 kDa Heme Protein Nitrophorin 4 by α‐Ketoacid‐Hydroxylamine (KAHA) Ligation

The chemical synthesis of the 184‐residue ferric heme‐binding protein nitrophorin 4 was accomplished by sequential couplings of five unprotected peptide segments using α‐ketoacid‐hydroxylamine (KAHA) ligation reactions. The fully assembled protein was folded to its native structure and coordinated to the ferric heme b cofactor. The synthetic holoprotein, despite four homoserine residues at the ligation sites, showed identical properties to the wild‐type protein in nitric oxide binding and nitrite dismutase reactivity. This work establishes the KAHA ligation as a valuable and viable approach for the chemical synthesis of proteins up to 20 kDa and demonstrates that it is well‐suited for the preparation of hydrophobic protein targets.     

An Efficient One‐pot Synthesis of Aryl‐substituted 1‐(Thiazol‐2‐yl)‐1H‐pyrazole‐3‐carboxylates via a Hantzsch Synthesis‐Knorr Reaction Sequence

The treatment of α‐bromoalkyl aryl ketones and 2‐(propan‐2‐ylidene)hydrazine carbothioamide afforded 4‐aryl‐2‐(2‐(propan‐2‐ylidene)hydrazinyl)thiazoles via a Hantzsch‐thiazole synthesis, which reacted with 4‐aryl‐2,4‐diketoesters via a sequential Knorr‐pyrazole reaction to deliver a variety of aryl‐substituted ethyl 1‐(thiazol‐2‐yl)‐1H‐pyrazole‐3‐carboxylates in a one‐pot fashion with moderate to high yields. The key intermediates 4‐aryl‐2,4‐diketoesters, existing as its enolic lithium salt, were synthesized in situ by a high‐yield tert‐BuOLi‐mediated Claisen condensation of alkylphenones and diethyl oxalate. This class of elegant molecule comprises aryl groups on the two different heterocyclic cores, and the configurations of two representative molecules were determined by single crystal X‐ray crystallography.     

Enzymatic Synthesis of 7′,5′‐Bicyclo‐DNA Oligonucleotides

The selection of artificial genetic polymers with tailor‐made properties for their application in synthetic biology requires the exploration of new nucleosidic scaffolds that can be used in selection experiments. Herein, we describe the synthesis of a bicyclo‐DNA triphosphate (i.e., 7′,5′‐bc‐TTP) and show its potential to serve for the generation of new xenonucleic acids (XNAs) based on this scaffold. 7′,5′‐bc‐TTP is a good substrate for Therminator DNA polymerase, and up to seven modified units can be incorporated into a growing DNA chain. In addition, this scaffold sustains XNA‐dependent DNA synthesis and potentially also XNA‐dependent XNA synthesis. However, DNA‐dependent XNA synthesis on longer templates is hampered by competitive misincorporation of deoxyadenosine triphosphate (dATP) caused by the slow rate of incorporation of 7′,5′‐bc‐TTP.     

Fused Triazines Via a Tandem Wittig/Ring Closure Strategy: Synthesis of Pyrazolo[5,1‐c]‐1,2,4‐Triazines and 1,2,4‐Triazolo[5,1‐c]‐1,2,4‐Triazines

A new method for the synthesis of azolo[5,1‐c]‐1,2,4‐triazine ring systems is reported by the sequential formation of triazine ring based on the regioselective formation of the azophosphoranes from hydrazonyl chlorides, followed by the intermolecular Wittig reaction with carboxylic acid chlorides, phenylisocyanate, and carbon disulfide.     

2,2,6,6‐Tetramethylpiperydinyl‐1‐oxyl (TEMPO) Functionalized Benzoxazines Prepared with a One‐Pot Synthesis for Reactive/Crosslinkable Initiators of Nitroxide Mediated Polymerization

In this work, the incorporation of a 2,2,6,6‐tetramethylpiperydinyl‐1‐oxyl (TEMPO) group to a benzoxazine ring is performed using a one‐pot synthesis for the preparation of TEMPO‐functionalized benzoxazine compounds and polymers as reactive and crosslinkable initiators for nitroxide‐mediated polymerization (NMP). The TEMPO‐functionalization reaction of benzoxazine, traced with ¹H NMR, is conducted with sequential radical transfer and coupling reactions. Moreover, polystyrene‐grafted polybenzoxazine copolymers are prepared with the TEMPO‐benzoxazine initiator and NMP of styrene. The polymerization system exhibits the characteristics of controlled radical polymerization, including controlled molecular weights of products and ability for sequential polymerization. Moreover, based on the chemical reactivity and crosslinking ability of benzoxazine groups, the synthesis route developed in this work will widen the scope of the design and synthesis of functional and high‐performance polymers.

     

An Efficient Synthesis of Optically Active trans‐(3R,4R)‐3‐Acetoxy‐4‐aryl‐1‐(chrysen‐6‐yl)azetidin‐2‐ones Using (+)‐Car‐3‐ene as a Chiral Auxiliary

An efficient enantioselective synthesis of 3‐acetoxy trans‐β‐lactams 7a and 7b via [2+2] cycloaddition reactions of imines 4a and 4b , derived from a polycyclic aromatic amine and bicyclic chiral acid obtained from (+)‐car‐3‐ene, is described. The cycloaddition was found to be highly enantioselective, producing only trans‐(3R,4R)‐N‐azetidin‐2‐one in very good yields. This is the first report of the synthesis of enantiomerically pure trans‐β‐lactams 7a and 7b with a polycyclic aromatic substituent at N(1) of the azetidin ring.     

7‐Halogenated 7‐Deaza‐2′‐deoxyxanthine 2′‐Deoxyribonucleosides

The synthesis of the 7‐halogenated derivatives 1b (7‐bromo) and 1c (7‐iodo) of 7‐deaza‐2′‐deoxyxanthosine ( 1a ) is described. A partial Br→I exchange was observed when the demethylation of 6‐methoxy precursor compound 4b was performed with Me₃SiCl/NaI. This reaction is circumvented by the nucleophilic displacement of the MeO group under strong alkaline conditions. The halogenated 7‐deaza‐2′‐deoxyxanthosine derivatives 1b , c show a decreased S‐conformer population of the sugar moiety compared to the nonhalogenated 1a . They are expected to form stronger triplexes when they replace 1a in the 1 ?dA?dT base triplet.     

Sequential Ugi Four‐Component Reaction (4‐CR)/CH Activation Using (Diacetoxyiodo)benzene for the Synthesis of 3‐(Diphenylmethylidene)‐2,3‐dihydro‐1H‐indol‐2‐ones

A sequential Ugi four‐component reaction (4‐CR)/C? H activation using (diacetoxyiodo)benzene is reported. This process is a five‐component reaction of aromatic aldehydes, aniline derivatives, isocyanides, phenylpropiolic acid (3‐phenylprop‐2‐ynoic acid), and (diacetoxyiodo)benzene for the synthesis of 3‐(diphenylmethylidene)‐2,3‐dihydro‐1H‐indol‐2‐ones. This procedure offers several advantages such as good yields, high bond‐forming efficiency, selectivity, and short reaction times.