Reversible addition–fragmentation chain‐transfer graft polymerization of styrene: Solid phases for organic and peptide synthesis

The γ‐initiated reversible addition–fragmentation chain‐transfer (RAFT)‐agent‐mediated free‐radical graft polymerization of styrene onto a polypropylene solid phase has been performed with cumyl phenyldithioacetate (CPDA). The initial CPDA concentrations range between 1 × 10^?2 and 2 × 10^?3 mol L^?1 with dose rates of 0.18, 0.08, 0.07, 0.05, and 0.03 kGy h^?1. The RAFT graft polymerization is compared with the conventional free‐radical graft polymerization of styrene onto polypropylene. Both processes show two distinct regimes of grafting: (1) the grafting layer regime, in which the surface is not yet totally covered with polymer chains, and (2) a regime in which a second polymer layer is formed. Here, we hypothesize that the surface is totally covered with polymer chains and that new polymer chains are started by polystyrene radicals from already grafted chains. The grafting ratio of the RAFT‐agent‐mediated process is controlled via the initial CPDA concentration. The molecular weight of the polystyrene from the solution (PS_free) shows a linear behavior with conversion and has a low polydispersity index. Furthermore, the loading of the grafted solid phase shows a linear relationship with the molecular weight of PS_free for both regimes. Regime 2 has a higher loading capacity per molecular weight than regime 1. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4180–4192, 2002     

Fundamental studies of grafting reactions in free radical copolymerization. II. Grafting of styrene,acrylate, and methacrylate monomers onto cis-polybutadiene using AIBN initiator in solution polymerization

Grafting can be initiated by primary and/ or polymer radical attack on the backbone polymer and it is well known that AIBN does not readily promote grafting, even when using poly-butadiene. We have studied the grafting of several different monomers onto cis-polybuta-diene using AIBN initiator and find dramatically different results among the monomers. As expected, styrene grafts at very low levels due to the inactivity of the initiator radicals and the polystyryl radicals. Methacrylate monomer grafts at a slightly higher level due to its more reactive polymer radical, while acrylate monomer readily grafts onto the poly-butadiene because polyacrylate radicals are quite reactive. The use of a kinetic model allowed the evaluation of rate coefficients for graft site initiation to be in the relative order of 0.1 : 1.0 : 10.0 (L/mol/s) for styrene:methacrylate:acrylate monomers. The model also pro-vided successful interpretations of the grafting data and its dependence upon the concen-trations of monomer, initiator, and backbone polymer. Due to the relatively higher reactivity of the polyacrylate radicals, the benzene solvent acted as a chain transfer agent in this system. This affected the molecular weight of both free and grafted acrylate polymer and also surpressed the graft level. Polyacrylate radicals attack the cis-polybutadiene backbone by abstracting an allylic hydrogen and also adding across the residual double bond. The latter mechanism is responsible for the majority of the grafting; the hydrogen abstraction leads to relatively inactive radicals which cause a retardation in the overall reaction rate. © 1995 John Wiley & Sons, Inc.     

Peroxide‐initiated chemical modification of poly(isobutylene‐co‐isoprene): H‐atom transfer yields and regioselectivity

The yield and regioselectivity of H‐atom abstraction by cumyloxy radicals from poly(isobutylene‐co‐isoprene) (IIR) are quantified and discussed in the context of cross‐linking/degradation outcomes and vinyltriethoxysilane (VTEOS) graft yields. Studies of IIR materials with different isoprene contents show that H‐atom abstraction from the allylic functionality provided by isoprene mers is responsible for the heightened H‐atom transfer reactivity of IIR relative to poly(isobutylene). Differences in the reactivity of allylic and alkyl macroradical intermediates makes high isoprene IIR materials less prone to peroxide‐initiated chain scission, but less responsive to VTEOS grafting formulations. Improved knowledge of H‐atom transfer reactivity is extended to a new approach for IIR cross‐linking involving acrylate‐functionalized nitroxyl chemistry. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3102–3109     

Kinetic Study of the Reaction Between Atactic Polypropylene and Dicumyl Peroxide by Differential Thermal Analysis

Abstract

The reaction kinetics of atactic polypropylene (APP) in bulk with dicumyl peroxide (DCP) as a radical generator have been studied by means of thermal differential analysis. Hydrogen abstraction from APP by cumyl radicals gives (polypropylen)yl radicals which undergo transfer to DCP, chain scission, disproportionation, and crosslinking, as well as reaction with cumyl radicals. Chain scission is shown to be the faster and crosslinking the slower of these two processes, even at temperatures of 473 K and above. Activation parameters are determined, and an analysis of the different processes is made on their basis.     

Isomer‐dependent reaction mechanisms of cyclic ether intermediates: cis‐2,3‐dimethyloxirane and trans‐2,3‐dimethyloxirane

Oxiranes are a class of cyclic ethers formed in abundance during low‐temperature combustion of hydrocarbons and biofuels, either via chain‐propagating steps that occur from unimolecular decomposition of β‐hydroperoxyalkyl radicals (β‐?QOOH) or from reactions of H?O with alkenes. The cis‐ and trans‐isomers of 2,3‐dimethyloxirane are intermediates of n‐butane oxidation, and while rate coefficients for β‐?QOOH → 2,3‐dimethyloxirane + ?OH are reported extensively, subsequent reaction mechanisms of the cyclic ethers are not. As a result, chemical kinetics mechanisms commonly adopt simplified chemistry to describe the consumption of 2,3‐dimethyloxirane by convoluting several elementary reactions into a single step, which may introduce mechanism truncation error—uncertainty derived from missing or incomplete chemistry. The present research examines the isomer dependence of 2,3‐dimethyloxirane reaction mechanisms in support of ongoing efforts to minimize mechanism truncation error. Reaction mechanisms are inferred via the detection of products from Cl‐initiated oxidation of both cis‐2,3‐dimethyloxirane and trans‐2,3‐dimethyloxirane using multiplexed photoionization mass spectrometry (MPIMS). The experiments were conducted at 10 Torr and temperatures of 650 K and 800 K. To complement the experiments, the enthalpies of stationary points on the ?R + O₂ surfaces were computed at the ccCA‐PS3 level of theory. In total, 28 barrier heights were computed on the 2,3‐dimethyloxiranylperoxy surfaces. Two notable aspects are low‐lying pathways that form resonance‐stabilized ketohydroperoxide‐type radicals caused by ?QOOH ring‐opening when the unpaired electron is localized adjacent to the ether group, and cis‐trans isomerization of ?R and ?QOOH radicals, via inversion, which enable reaction pathways otherwise restricted by stereochemistry. Several species were identified in the MPIMS experiments from ring opening of 2,3‐dimethyloxiranyl radicals. Neither of the two conjugate alkene isomers prototypical of ?R + O₂ reactions were detected. Products were also identified from decomposition of ketohydroperoxide‐type radicals. The present work provides the first analysis of 2,3‐dimethyloxirane oxidation chemistry and reveals that consumption pathways are complex and require the expansion of submechanisms in chemical kinetics mechanisms.     

Surface grafting of polyethylene by mutual irradiation in methyl acrylate vapor. II. High-energy electrons irradiation

Vapor-phase mutual grafting of methyl acrylate (MA) onto polyethylene (PE) at high dose rates from an electron accelerator yields the same surface graft structure as does the grafting at low dose rates from ⁶⁰Co sources; i.e., a homopolymer layer (consisting of only MA component) is easily formed on the inner graft copolymer layer (consisting of both MA and PE components) as a result of the continuously increasing surface graft composition. To produce the surface layer, 4-MeV electron irradiation with a linear electron accelerator requires only less than 3 min of irradiation time at dose rates of more than 2 Mrad/min, whereas γ irradiation with a ⁶⁰Co source requires at least 1 hr at dose rates of less than 2 × 10³ rad/min. The rate of monomer consumption (or polymerization) in the surface homopolymer layer shows no dependence of irradiation time and a positive dependence of dose rate. It has been suggested that this kinetic feature at the high dose rates shows some contribution of vapor-phase homopolymerization and subsequent deposition (onto the grafting surface) followed by recombination with the grafted side chain radicals, although secondary graft copolymerization from the grafted chain radicals is still the principal process for the growth of the surface homopolymer layer.     

Surface-Initiated RAFT Polymerization of 2,3-Dimethyl-1,3-butadiene on Silica Nanoparticles for Matrix-free Methyl Rubber Nanocomposites

Reversible addition-fragmentation chain transfer (RAFT) polymerization of 2,3-dimethyl-1,3-butadiene (DMB) in solution and on the surface of silica nanoparticles was investigated and PDMB-grafted silica nanoparticles (PDMB-g-SiO₂ NPs) with different chain densities and molecular weights were prepared. The kinetic studies of DMB polymerization mediated by silica anchored RAFT agents at different graft densities were investigated and compared to the polymerization mediated by the corresponding free RAFT agent. The PDMB-g-SiO₂ NPs were cured to prepare rubbery films and obtain matrix-free nanocomposites, which exhibited a good dispersion of silica nanoparticles and improved mechanical properties compared to the unfilled crosslinked rubber. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 417–427     

Grafting of maleic anhydride to hydrocarbons below the ceiling temperature

Maleic anhydride has been grafted to eicosane and squalane at 60–80°C using 1,2-dichlorobenzene as solvent and benzoyl peroxide as initiator. These hydrocarbons are low molecular weight models for hydrocarbon polymers containing secondary and tertiary hydrogen atoms. In the absence of the hydrocarbon and with monomer concentrations of the order of 1M, low molecular weight poly(maleic anhydride) is formed. On addition of the hydrocarbon, the main product is grafted material and very little homopolymer is formed. The grafts consist primarily of single succinic anhydride units but some of them are short poly(maleic anhydride) chains. Ceiling temperature considerations control the formation of homopolymer in the absence of hydrocarbon substrate. In the presence of eicosane or squalane, initiation of grafting proceeds by hydrogen abstraction from the hydrocarbon. The main factor controlling graft length is then the ratio of the rates of intramolecular hydrogen abstraction and of monomer addition to succinic anhydride radicals © 1995 John Wiley & Sons, Inc.     

Fundamental studies of grafting reactions in free radical copolymerization. IV. Grafting of styrene,acrylate, and methacrylate monomers onto vinyl-polybutadiene using benzoyl peroxide and AIBN initiators in solution polymerization.

Vinyl-1,2 polybutadiene (vinyl-PBD) was used as the backbone polymer for the grafting of styrene, methacrylate, and acrylate monomers using both benzoyl peroxide and AIBN initiators. Radical attack on the backbone can occur through the pendant vinyl group or at the tertiary, allylic hydrogen site. Effective graft sites are formed via double bond addition of either primary (initiator) or polymer radicals. The production of tertiary allylic radicals on the backbone chain also occurs and results in moderate to dramatic reaction rate re-tardation in every monomer system. The type of initiator is only important when the polymer radicals are not very reactive, as in the case of styrene, and to a lesser extent for methacrylate monomer. Graft efficiencies are generally higher when using vinyl-PBD than when using cis-PBD. © 1995 John Wiley & Sons, Inc.     

Features of the kinetics of the liquid-phase oxidation of cyclohexanol

The kinetics of oxygen uptake in the cumyl peroxide-initiated oxidation of cyclohexanol (373 K, o-dichlorobenzene) is studied. The parameters of the oxidizability of k _p (2k _t )^?0.5 (which depend on [RH]) and the rate constants of the bi- and trimolecular reactions of chain initiation (k ₀ = 1.25 × 10^?8 L/(mol s) and k′₀ = 2.5 × 10^?9 L²/(mol² s), respectively) are determined by solving the inverse kinetic problem. It is demonstrated that the quadratic-law recombination of peroxyl radicals during cyclohexanol oxidation also occurs without chain termination. The recombination rates of peroxyl radicals with and without chain termination (k′/k _t ) are found to grow with increasing [RH], reaching their maxima at [RH] = 1.0 mol/L, and to diminish subsequently. We conclude that this can be attributed to changes in the ratio between the propagating peroxyl radicals (hydroperoxyl and 1-hydroxycyclohexylperoxyl) in the reaction medium.     

Photochemical conversion of poly-2,3-diphenylbutadiene to poly-9,10-dimethylenephenanthrene

Poly-2,3-diphenylbutadiene dissolved in CH₂Cl₂ has been subjected to continuous irradiation at 313 nm and to flash photolysis at 266 nm at room temperature. Cyclization of pendant phenyl groups to dihydrophenanthrene groups dominates over isomerization, indicating impeded flexibility of polymer chain segments. In the case of 2,3-diphenylbutene-2, isomerization dominates over cyclization. In the presence of O₂, dihydrophenanthrene groups are converted to phenanthrene groups. Flash photolysis experiments in oxygenated solution revealed that phenanthrene groups are formed in the polymer according to two processes, viz. a fast spontaneous dehydrogenation and a slower oxidation.     

Consistent experimental and theoretical evidence for long-lived intermediate radicals in living free radical polymerization

The cumyl dithiobenzoate (CDB)-mediated reversible addition fragmentation chain transfer (RAFT) polymerization of styrene at 30 degrees C is studied via both kinetic experiments and high-level ab initio molecular orbital calculations. The kinetic data clearly indicate the delayed onset of steady-state behavior. Such an observation is consistent with the slow fragmentation model for the RAFT process, but cannot be reconciled with the cross-termination model. The comprehensive failure of the cross-termination model is quantitatively demonstrated in a detailed kinetic analysis, in which the independent influences of the pre-equilibria and main equilibria and the possible chain length dependence of cross-termination are fully taken into account. In contrast, the slow fragmentation model can describe the data, provided the main equilibrium has a large fragmentation constant of at least 8.9 x 10(6) L mol(-1). Such a high equilibrium constant (for both equilibria) is consistent with high-level ab initio quantum chemical calculations (K = 7.3 x 10(6) L mol(-1)) and thus appears to be physically realistic. Given that the addition rate coefficient for macroradicals to (polymeric) RAFT agent is 4 x 10(6) L mol(-1) s(-1), this implies that the lifetime of the RAFT adduct radicals is close to 2.5 s. Since the radical is also kinetically stable to termination, it can thus function as a radical sink in its own right.     

Radical grafting on lignin. Part I. Radiation-induced grafting of styrene onto hydrochloric acid lignin

By irradiation with gamma rays styrene was grafted onto hydrochloric acid lignin. When the graft polymers were subjected to nitrobenzene oxidation, the vanillin yields indicated two kinds of reaction occurring in the grafting. Polystyrene branches were separated from the graft polymers, and their M?_n were determined osmometrically. At grafting ratios of up to 100 the vanillin yields diminished proportionately with increasing grafting, and the M?_n of the branches, 5000, was unchanged. At grafting ratios of more than 100 the vanillin yields were constant, independent of the ratios, but the M?_n values of the branches increased with grafting. Paper chromatography of the aromatic acids obtained by oxidation of methylated lignin and the graft polymer indicated that isohemipic and metahemipic acids were more abundant in the acid fraction of the graft polymer than in the lignin itself. A qualitative mass analysis of the gaseous products evolving from the irradiated lignin showed the presence of hydrogen molecules only. Gamma-ray radiation brought about no change in the yields of vanillin. It was therefore concluded that radiation grafting on lignin at grafting ratios of less than 100 proceeded through the addition of the styrene polymer radicals to the aromatic nuclei of the lignin and that then branches propagated from the aliphatic part of the lignin, where C? H bond scission had been caused by the irradiation. The grafting sites of lignin would be C-5 and C-6 of the guaiacyl nucleus and, probably the β and γ carbon atoms of the aliphatic side chain of the lignin.     

Superhydrophobic surface by immobilization of polystyrene on vinyl-modified titania nanoparticles

Abstract  

The organic–inorganic nanocomposite films were fabricated by grafting polystyrene (PS) onto the vinyltriethoxysilane (VTEOS) modified titanium dioxide nanopowders using free radical polymerization. The composition of the surfaces and the structure for the PS grafted titania (PS-g-TiO₂) were examined by infrared spectroscopy, X-ray photoelectron spectroscopy and thermogravimetric analysis, and the rough surface was confirmed by the evaluation of the morphological characteristics of the coating using hybrid particles. The wetting properties of the VTEOS modified titania and PS-g-TiO₂ films were investigated, which show the maximum static water contact angles of 160° and 154°, and minimum sliding angles of 3° and 4°, respectively.     

Effect of the medium on the reactivity of fullerene N60 with respect to the peroxide radicals RO2 ·. Chemiluminescence in the C60—AIBN—O2—C2H5Ph—PhH system

Chemiluminescence (CL), HLPC, and volumetry were used to demonstrate that fullerene N₆₀ exerts no inhibiting effect on the liquid-phase chain oxidation of hydrocarbons. Peroxide radicals RO₂ · do not add to N₆₀ in hydrocarbons with active C—H bond, because the reaction is suppressed by the competing addition of RO₂ · to the hydrocarbon. The addition of RO₂ · radicals to N₆₀ does occur in benzene (a solvent with strong C—H bonds) in the presence of low concentrations of the hydrocarbon oxidized. Fullerene N₆₀ is found to exhibit a new type of liquid_phase CL, which is presumably generated upon thermal decomposition of fullerene peroxides formed by adding peroxy radicals to fullerene in the C₆₀—AIBN—O₂—C₂H₅Ph—PhH system. The CL spectrum exhibits long-wavelength maxima at 645 and 685 nm. The supposed CL emitters are keto derivatives of fullerene N₆₀.     

Model simulation studies of complex free radical reactions: The graft copolymerization of styrene and acrylonitrile onto ethylene-propylene-isopropylidendicyclopentadiene terpolymer

A kinetic analysis without steady approximation of the graft copolymerization of styrene-acrylonitrile onto ethylene- propylene-isopropylidendicyclopentadiene terpolymer (EP-IPDCP) is described. Some of the kinetic constants were experimentally determined. The grafting process is interpreted mainly in terms of the attack on EP-IPDCP by benzoyloxy radicals; phenyl radicals play a minor negative role by enhancing the rate of homopolymerization. A major contribution to the grafting yield is made by the propagation steps in graft polymerization and by crossed termination between grafted and ungrafted chains; of minor importance are the cross terminations between ungrafted growing chains and rubber radicals. The ole played by the solvent (benzene) and by saturated and unsaturated units in the EP-IPDCP chains is analyzed. Diffusion effects caused by the poor solvent compatibility of grafted and ungrafted chains were taken into account by allowing the termination and propagation rate constants to change in a controlled way during the reaction. The trapping of EP-IPDCP units caused by the aggregation of polymer particles seems to be indispensable to explain the decreasing trend of the grafting efficiency curve. Other information of interest pertains to the distribution of initiating radicals among the various competing reactions in the process and to the data of concentrations versus reaction time for reactants, products, and free radical intermediates. The results of a sensitivity analysis and the rate constants used in the calculations are given.     

Peroxide-initiated grafting of maleimides onto hydrocarbon substrates

The grafting of N-phenethyl-maleimide (1) onto squalane and eicosane was investigated. As reference substances for spectroscopical investigations homopolymer, N-phenethyl-succinimide (2), t-butyl-(4) and cyclohexyl-N-phenethyl-succinimide (6) were synthesized. The grafting reactions were carried out at 150 °C in 1,2-dichlorobenzene with Luperox 130 as initiator (molar ratio hydrocarbon substrate:1:initiator = 10:1:0.2). Two fractions of graft products were isolated and analysed by ¹H NMR, ¹³C NMR, FTIR and UV spectroscopy, SEC and MALDI-TOF MS to determine the average number of grafted residues per substrate molecule and to elucidate the structure of the grafts and the grafting sites. Overall grafting yields were found to be >90%. Only a small percentage of the total amount of substrate was grafted (2-3%). First fraction of both oligomers (approx. 25 wt%) showed to be a mixture of homopolymers (average degree of polymerization 6) and graft products (approx. 1:3), the latter containing mainly long-chain grafts with an average chain length of 7. The major fraction of graft products contained predominantly single units. As an average number of units per substrate molecule very similar results were obtained for eicosane and squalane (n = ∼ 3). In the case of squalane single units were found to be linked mainly to tertiary carbon atoms, long chain grafts mainly to secondary C-atoms. Apart from the homopolymers resulting from radical transfer, homopolymers terminated with methyl groups resulting from secondary radicals formed by the decomposition of Luperox were also observed. Homopolymers as well as graft products were found to contain small amounts of maleimide groups. The results suggest that as in the mechanism proposed for maleic anhydride, both inter- and intramolecular hydrogen abstraction occurs as part of the chain process. Termination proceeds mainly by hydrogen transfer and also by disproportionation, to a lesser extent. The formation of long chain grafts on tertiary carbons seems to be sterically hindered.     

Radiation-induced grafting of hexafluoroacetone to polyethylene

Although hexafluoroacetone is not polymerized by ionizing radiation, it is shown that γ-irradiation of hexafluoroacetone dissolved in polyethylene films produces a graft with a G value of 500 and, therefore, a kinetic chain length of 200. The effects of dose rate (0.021–3.55 Mrad/hr), temperature (21–53°C), and pressure (1.5–6.2 atm) on the graft rates have been measured. Also the effect of temperature (21–53°C) on the postirradiation grafting reaction and on the physical properties of the grafted films have been investigated. Together with solubility, diffusivity, infrared, and EPR data, the results lead to the following mechanism: The first step represents production of secondary alkyl radicals in the polyethylene by irradiation of the polymer–monomer system. The second step involves the linkage of the monomer to the radical site to form the alkoxy radical. Since it cannot add to another monomer unit, this radical abstracts a hydrogen atom from an adjacent polyethylene chain in the third step. Radical R· can then continue the kinetic chain. Radical combination and radical–impurity reactions terminate the chain. The graft may be unique in that it is the only one we have found in which a pendant group containing only one monomer unit is attached by a chain reaction. At dose rates up to 0.215 Mrad/hr, the grafting was linear with time and proportional to the 0.73 power of the dose rate at 21°C and to the 0.81 power at 53°C. The reaction is insensitive to increases in dose rate above 0.215 Mrad/hr where diffusivity measurements show the reaction to be diffusion-controlled. The rate of reaction increased 10% when the temperature was increased from 21 to 53°C. While there was significant postirradiation grafting reaction at 21°C, there was none at 53°C. The results do not fit the equations of reaction-controlled steady-state graft-polymerization kinetics. The deviations arise from an observed increase in monomer solubility in the film with increasing graft combined with low diffusivity of the monomer in polyethylene, and the presence of a radical-scavenging impurity which terminates the kinetic chain with the appearance of a relatively stable radical. EPR data suggests that the impurity is a trace of oxygen which may be produced radiolytically.     

Gas-phase reactions of 1,4-benzodioxan, 2,3-dihydrobenzofuran,and 2,3-benzofuran with OH radicals and O3

The kinetics of the gas-phase reactions of 1,4-benzodioxan, 2,3-dihydrobenzofuran, and 2,3-benzofuran with OH radicals and O₃ have been studied at 298 ± 2 K and atmospheric pressure of air and the products have also been investigated. 1,4-Benzodioxan and 2,3-dihydrobenzofuran were chosen as volatile model compounds for dibenzo-p-dioxin and dibenzofuran, respectively. The rate constants, or upper limits thereof, for the O₃ reactions were (in cm³ molecule^?1 s^?1 units): 1,4-benzodioxan, <1.2 × 10^?20; 2,3-dihydrobenzofuran, <1 × 10^?19; and 2,3-benzofuran, (1.83 ± 0.21) × 10^?18. Using a relative rate method, the rate constants for the OH radical reactions (in cm³ molecule^?1 s^?1 units) were: 1,4-dibenzodioxan, (2.52 ± 0.38) × 10^?11; 2,3-dihydrobenzofuran, (3.66 ± 0.56) × 10^?11; and 2,3-benzofuran, (3.73 ± 0.74) × 10^?11. Salicylaldehyde was observed as a product of the OH radical-initiated and O₃ reactions of 2,3-benzofuran, with measured formation yields of 0.26 ± 0.05 and 0.13 ± 0.07, respectively.     

Kinetics of the reaction of the 2,4,6-tri-tert-butylphenoxyl radical with aromatic amines under quasiequilibrium conditions,and the dissociation energy of the N-H bond in aromatic amines

We have studied the kinetics of the reaction of the 2,4,6-tri-tert-butylphenoxyl radical with 11 aromatic amines under quasiequilibrium conditions. The equilibrium constant for each amine was determined from the kinetic results. These values, together with their temperature dependence, were used to calculate the dissociation energy of the N-H bond in the 11 aromatic amines. By using earlier results for the reaction of the aroxyl radical with cumyl hydroperoxide, catalyzed by aromatic amines, we have calculated the rate constants for the reaction of 10 aminyl radicals with cumyl hydroperoxide and of cumylperoxy radicals with 10 aromatic amines.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 743–749, April, 1990.