The NMR Spectra of Styrene-Itaconate Ester Copolymers Obtained by Free Radical Mechanism

Styrene copolymerized with dimethyl itaconate and with methyl benzyl itaconate by use of a free radical initiator.

Monomer reactivity ratios for styrene (M₁)-dimethyl itaconate (M₂) co-polymerization were r₁ = 0.50 and r₂ = 0.06 and for styrene (M₁-methyl benzyl itaconate (M₂), r₁ = 0.42 and r₂ = 0.19. The nonconjugative methoxycarbonyl affected the monomer reactivity of itaconate toward polystyrene radical.

The NMR spectra of styrene-dimethyl itaconate copolymers were very complex and could not be interpreted because the two methoxy groups have similar chemical shifts.

The NMR spectra of styrene-itaconate copolymers were not so complex if methyl benzyl itaconate was used as comonomer instead of dimethyl itaconate. Methoxy and benzyloxy absorptions were sufficiently separated and “co-isotacticity” could be determined.

It is shown that the nonconjugative methoxycarbonyl group had little influence on the steric course of the cross-propagation reaction between styrene and itaconate.     

Monomer Reactivity Ratios for the Copolymerization of p-lsopropylstyrene with Styrene and Methyl Methacrylate

Abstract

The monomer reactivity ratios for the copolymerizations of p-isopropylstyrene with styrene and with methyl methacrylate have been determined by the ionization chamber-vibrating reed electrometer radioactivity assay technique. The values from the differential form of the copolymerization equation are r₁ (styrene) = 1.22, r₂ (p-isopropylstyrene) = 0.89, and r₁ (methyl methacrylate) = 0.44, r₂ (p-isopropylstyrene) = 0.39. The values from the integrated form of the equation are r₁ (styrene) = 1.37 and r₂ = 0.99. These values indicate that, in the copolymerization of p-divinylbenzene (p-DVB) with styrene, the p-isopropylstyrene-like unit, formed from having the first vinyl group of p-DVB reacted, takes part in subsequent propagation reactions with styrene less readily than either styrene or p-DVB.     

Effect of monomer/nanoclay interaction on the kinetics of atom transfer radical homo- and copolymerization of styrene and methyl acrylate

Atom transfer radical homo- and copolymerization of styrene and methyl acrylate initiated with CCl₃-terminated poly(vinyl acetate) macroinitiator were performed at 90°C in the presence of nanoclay (Cloisite 30B). Controlled molecular weight characteristics of the reaction products were confirmed by GPC. It was shown that nanoclay slightly decreased the rate of styrene polymerization, while it significantly enhanced the rate of methyl acrylate polymerization and its copolymerization with styrene. The reactivity ratios of the monomers in the presence and in the absence of nanoclay were calculated (r _St = 1.002 ± 0.044, r _MA = 0.161 ± 0.018 by extended Kelen-Tudos method and r _St = 1.001 ± 0.038, r _MA = 0.163 ± 0.016 by Mao-Huglin method), confirming that the presence of nanoclay has no influence on monomer reactivity. The enhancement in the homopolymerization rate of methyl acrylate as well as its copolymerization rate with styrene was attributed to nanoclay effect on the dynamic equilibrium between active (macro)radicals and dormant species. Dipole moments of the monomers were successfully used to predict structure of the polymer/clay nanocomposites prepared via in situ polymerization.     

Amphiphilic graft copolymers with poly(oxyethylene) side chains: Synthesis via phthalimidoacrylate prepolymers

Amphiphilic graft copolymers of definite composition were obtained by grafting of amino-functionalized poly(oxyethylene) monoether (MPEO–NH₂) of M?_n = 750, 2000, and 5000 onto phthalimidoacrylate (PIA) homopolymer or its copolymer with styrene (St). The radical co-polymerization of PIA and phthalimidomethacrylate (PIMA) with St was studied in dimeth-ylformamide (DMF) at 60°C. The copolymer composition curves and the monomer reactivity ratios showed a high tendency of PIA to alternating copolymerization with St (r₁r₂ = 0.006). Hydrogen bonding between the functional groups leads to significant spectral modifications. The micellization of the graft copolymers was studied by GPC in aqueous-methanolic eluent. The aggregation behavior of the graft copolymers depended on their composition and chromato-graphic separation lead to the copolymers fractionation. © 1995 John Wiley & Sons, Inc.     

Monomer Reactivity Ratios from High Conversion Copolymerization of Styrene with meta- and with para-Divinylbenzene

The copolymerization reactivity ratios for styrene/m- and styrene/p-divinylbenzene have been determined at high conversions (<35%) using the integrated form of the copolymerization equation. Values of r₁ (s) = 1.11, r₂ (m) = 1.00; and r₁ (s) = 0.20, r₂ (p) = 1.00 were obtained. These values indicate the same relative behavior but are quantitatively different from the differential data. The data confirm that the para isomer is incorporated more rapidly into the growing polymer chain than is the meta isomer.     

Preparation and degradation of copolymers of methyl methacrylate with alkali metal methacrylates—I. Copolymerization parameters for the systems methyl methacrylate-lithium methacrylate,methyl methacrylate-sodium methacrylate and methyl methacrylate-potassium methacrylate

Copolymerizations of methyl methacrylate with the Li, Na and K salts of methacrylic acid have been studied in methanol solution at 60°. Reactivity ratios have been calculated by the methods due to Mayo and Lewis, Fineman and Ross and Peckham. The rate of copolymerization decreases as the size of the metal cation increases, in contrast to the behaviour in the homopolymerization of the alkali metal methacrylates. The systems have the following reactivity ratios (MMA as monomer-1): Li salt r₁ = 0.59, r₂ = 0.073; Na salt r₁ = 3.97, r₂ = 0·126; K salt r₁ = 5.65, r₂ = 0.143. The MMA-LiMA system shows azeotropic copolymerization for a mole fraction of MMA in the feed equal to 0.7. This system shows a strong tendency towards alternation (r₁r₂ = 0.044). The differences in the reactivity ratios are discussed in relation to steric and electrostatic effects.     

Studies on Synthesis and Characterization of Charge Transfer Polymerization of Styrene and Alkyl Methacrylates

Abstract

Copolymers involving styrene and homologues of alkyl methacrylates (viz., methyl, ethyl, and butyl methacrylates) were synthesized at 60°C by employing a mixture of n‐butylamine and carbontetrachloride as charge transfer (CT) initiators in dimethyl sulphoxide medium. The CT complex was characterized by UV spectroscopy while the respective copolymers were characterized by employing infrared (IR) and ¹H NMR spectroscopy. The copolymer compositions were determined by using ¹H NMR spectroscopy and the reactivity ratios were computed by Fineman–Ross (F–R) and Kelen–Tudos (K–T) methods. The reactivity ratios of Sty‐MMA and Sty‐EMA copolymers indicate that higher level of styrene is incorporated in the copolymer. On the other hand the Sty‐BMA system exhibits different behavior. The higher value of r ₂ is obtained denoting that BMA is more active than styrene and hence, more BMA is present in the copolymer chain. In Sty‐MMA and Sty‐BMA systems, the product of r ₁ and r ₂ is greater than 1, representing the formation of high degree of random copolymers. However, in the case of Sty‐EMA, the product of r ₁ and r ₂ is less than 1 indicating the formation of alternating copolymer.     

The structure of copolymers of vinyl cyclohexane with styrene

Copolymerization of vinyl cyclohexane (monomer-1) with styrene was investigated in the presence of the stereospecific complex catalyst TiCl₃ + Al(iso-C₄H₉)₃. Monomer reactivity ratios were r₁ = 0·177 ± 0·051 and r₂ = 2·117 ± 0·370. The monomer unit distributions in the copolymers were estimated by comparison of the i.r.-spectra of copolymers and the isotactic homopolymers using absorption bands at 565 and 1084 cm^?1 which correspond to the vibrations of styrene blocks containing ? 5 styrene units and the band at 985 cm^?1 characterizing polystyrene crystallinity. The data indicate the tendency towards alternation in the copolymerization. Analysis of the experimental and literature data led to the conclusion that distribution of the units in copolymers of vinyl cyclohexane with α-olefins is determined by the nature of the α-olefin. The following activity series is proposed for α-olefins in their copolymerization with vinyl cyclohexane in the presence of catalytic systems based on titanium salts and organo-aluminium compounds: propylene >; 4-methylpentene-1 >; styrene >; 3-methylbutene-1 ～ vinyl cyclohexane.     

Synthesis of Graft Polymers by Copolymerization of Macromonomers. II. Copolymerization Kinetics of Styrene-and Methacrylate-Terminatedpoly(2-Acetoxyethyl Methacrylate) Macromonomers

Styrene-terminated poly(2-acetoxyethyl methacrylate) macromonomer (EBA), methacrylate-terminated poly(2-acetoxyethyl methacrylate) macromonomer (MPA), and methacrylate-terminated poly(methyl methacrylate) macromonomer (MPM) were synthesized and subjected to polymerization and copolymerization by a free-radical polymerization initiator (AIBN). EBA and MPA were homopolymerized at various concentrations. EBA exhibited higher reactivity than styrene. The reactivity of MPA, however, was almost equal to that of glycidyl methacrylate. Cumulative copolymer compositions were determined by GPC analysis of copolymerization products. The reactivity ratios estimated were r_a = 0.95 and r_b , = 0.90 for EBA macromonomer (a)-methyl methacrylate (b) copolymerization. These values were not consistent with literature values for the styrene-methyl methacrylate and p-methoxy-styrene-methyl methacrylate systems. The reactivity ratios estimated for MPA and 2-bromoethyl methacrylate were r_a - 0.95 and r_b , = 0.98; equal to the glycidyl methacrylate-2-bromoethyl methacrylate system. MPA or MPM was also copolymerized with styrene, and the reactivity ratios were r_a = 0.40, r_a = 0.60 and r_a = 0.39, r_a = 0.58, respectively. These estimates were in good agreement with the reactivity ratios for glycidyl methacrylate and styrene. Thus, no effect of molecular weight was observed for both copolymerization systems.     

Quantifying and Controlling the Composition and ‘Randomness’ Distributions of Random Copolymers

The effect of disparity in the reactivity ratios of monomer pairs on the composition distribution and microstructure of the resultant copolymer formed through free‐radical polymerization is quantified computationally. This correlation has been determined for the monomer pairs of styrene/methyl methacrylate and styrene/2‐vinyl pyridine for a variety of monomer feed ratios. These monomer pairs were chosen as they represent systems that have been utilized to experimentally examine the importance of copolymer architecture on its ability to compatibilize an immiscible polymer blend. Moreover, their respective random copolymers show conflicting results for this examination. The results of this work show that the difference in the reactivity ratios of styrene and 2‐vinyl pyridine copolymer (r₁ = 0.5, r₂ = 1.3) significantly broadens the composition and randomness distribution of the resultant copolymer. This breadth is not easily avoided as it evolves even in the early stages of the copolymerization. Conversely, for the styrene/methyl methacrylate pair, the reactivity ratios are similar (r₁ = 0.46, r₂ = 0.52) and this results in a copolymer with a narrow composition distribution and sequence distribution dispersion. Stopping the polymerization at early conversion further narrows both distributions. The presented results, therefore, provide fundamental information that must be considered when planning an experimental procedure to evaluate the relative importance of sequence distribution and composition distribution of a random on its application.     

Synthesis and properties of epoxy-containing poly(cyclopropylstyrenes)

New epoxy-containing cyclopropylstyrenes were synthesized and their copolymerization with styrene in benzene in the presence of AIBN was studied. The reactivity ratios of cyclopropylstyrenes (r ₁) and styrene (r ₂) range from 1.15 to 1.18 and from 0.55 to 0.58, respectively, and the parameters Q ₁ and e ₁ vary over 2.86–3.07 and 1.43–1.45, respectively. The photosensitivity and some mechanical properties of the synthesized copolymers were estimated.     

Polymerization and Copolymerization of Allyl Allyl Sulfonate

Allyl allyl sulfonate (AAS) has been polymerized under the influence of azobisisobutyronitrile to low molecular weight polymers containing cyclic structures. This is in contrast to the behavior of allyl ethane sulfonate (AES) and of propyl allyl sulfonate (PAS) which did not polymerize under the same conditions. AAS has been copolymerized with styrene, methyl acrylate, and vinyl acetate. The following copolymerization reactivity factors have been found:

r_AAS 0.01 ± 0.01 r_styrene 13 ± 1

r_AAS 0-37 ± 0.09 r_{methyl acrylate} 5.3 ± 0-7

r_AAS 1.54 ± 0.08 r_{vinyl acetate} 0.5 ± 0.15

The results indicate that AAS has a higher reactivity than AES or PAS.     

Synthesis of Graft Polymers by Copolymerization of Macromonomer. III. Preparation and Copolymerization of Styrene-Terminated Poly(Oxyethylene) Macromonomer

Styrene-terminated poly(oxyethylene) macromonomers (SOE) with narrow molecular weight distribution and quantitative styrene monofunc-tionality were synthesized. In homopolymerization of SOE, conversion of monomer to polymer was shown to be low in spite of high consumption of the vinyl groups of the SOE molecules. Free-radical copolymer-ization of the macromonomer with methyl methacrylate and styrene occurred smoothly, as opposed to homopolymerization. Cumulative copolymer composition and total conversion were determined from the conversions of macromonomer and comonomer (by weight changes) and by proton NMR of the copolymer. The monomer reactivity ratios were found to be r_a = 0.06 and r_b = 2.0 for the copolymerization of SOE macromonomer (a) with methyl methacrylate (b). In this case the macromonomer exhibited considerably lower reactivity than predicted from its low molecular weight model compound. The monomer reactivity ratios estimated for SOE and styrene were r_a = 0.86 and r_b = 1.20. The reactivity of SOE was comparable to, but somewhat lower than, styrene. The graft copolymers were used as activators in the halogen displacement reaction, and it was found that their catalytic activity depends on copolymer composition and chemical structure.     

N-1-ALKYLITACONAMIC ACIDS-CO-STYRENE COPOLYMERS. 1. SYNTHESIS,CHARACTERIZATION AND MONOMER REACTIVITY RATIOS

Copolymers containing N-1-ethylitaconamic acid, N-1-propyl-itaconamic acid, N-1-butylitaconamic acid, N-1-hexylitaconamic acid, N-1-octylitaconamic acid and N-1-decylitaconamic acid with styrene of different comonomer compositions were synthesized and characterized. Copolymer composition was determined by elemental analysis following the nitrogen content in the resulting copolymers. Monomer reactivity ratios r₁ and r₂ of the different copolymers were estimated using straight line intersection procedures such as Fineman-Ross (F-R) and Kelen-Tüdos (K-T) and by a nonlinear one, according to the reactivity ratios error-in-variables model (RREVM). Good agreement between the different procedures for r₁ and r₂ determination was found. Differences in the reactivity of N-1-alkylitaconamic acids (NAIA) relative to styrene were found i.e., ethyl and propyl derivative are less reactive with itself than butyl, hexyl, octyl, and decyl derivatives with itself. Copolymers with some tendency toward small block formation are found.     

Homo‐ and copolymerization of norbornene with styrene catalyzed by a series of copper(II) complexes in the presence of methylaluminoxane

Vinyl‐type polymerization of norbornene as well as random copolymerization of norbornene with styrene was studied using a series of copper complexes‐MAO. The precatalysts used here are copper complexes with β‐ketoamine ligands based on pyrazolone derivatives and the molecular structure of complex 4 was determined using X‐ray analysis. All of these catalyst systems are moderately active for the vinyl‐type polymerization of norbornene and random copolymerization of norbornene with styrene. The random copolymers obtained suggest that only one type of active species is present. Gel permeation chromatography (GPC) and NMR indicate that the copolymers are ‘true’ copolymers. The copolymerization reactivity ratios (r_NBE = 20.11 and r_Sty = 0.035) indicate a much higher reactivity of norbornene, which suggests a coordination polymerization mechanism. The solubility and processability of the copolymers are improved relative to polynorbornene and the thermostability of the copolymers is improved relative to polystyrene. Copyright © 2006 John Wiley & Sons, Ltd.     

Effects of temperature on styrene–methacrylonitrile copolymerization

The free-radical copolymerization of styrene and methacrylonitrile was studied in toluene solution at 60, 90, and 120°C. Copolymer composition was estimated from gas-chromatographic measurement of unreacted monomer concentrations. Reactions were carried to about 20% conversion to minimize analytical errors. Reactivity ratios were calculated by using an integrated form of the Mayo-Lewis simple copolymerization equation. Reactivity ratios were not sensitive to reaction temperature. The values at 90°C are r₁ = 0.41 (methacrylonitrile) and r₂ = 0.37 (styrene). The r₁ values are higher than those reported by other workers, presumably because of advantages in the present analytical technique and calculation method. The negligible temperature dependence of reactivity ratios is in accord with theory. If monomer pairs exhibit pronounced dependence of reactivity ratios on polymerization temperature, this may indicate a change in mode of placement of units in the polymer chain.     

Copolymerization of styrene and methyl methacrylate. Reactivity ratios from conversion–composition data

A method for the determination of reactivity ratios from conversion–composition data has been outlined. The conversion–composition changes during the copolymerization of styrene (M₁) and methyl methacrylate (M₂) have been studied at 60°C. By a method of graphical intersection, the integrated form of Skeist's equation has been used to determine the reactivity ratios (r₁ = 0.54 ± 0.02 and r₂ = 0.50 ± 0.06) in reasonably good agreement with values reported in the literature. The area of intersection was used as a measure of the precision of the data.     

Atom transfer radical copolymerization of n‐hexylmaleimide and styrene in an ionic liquid

Dendritic polyarylether 2‐bromoisobutyrates of different generations (Gn‐Br, n = 1–3) as macroinitiators for the atom transfer radical copolymerization of N‐hexylmaleimide and styrene in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate, were investigated. The copolymerization carried out in the ionic liquid with CuBr/pentamethyldiethylenetriamine as a catalyst at room temperature afforded polymers with well‐defined molecular weights and low polydispersities (1.18 < M_w/M_n < 1.36, where M_w is the weight‐average molecular weight and M_n is the number‐average molecular weight), and the resultant copolymers possessed an alternating structure over a wide range of monomer feeds (f₁ = 0.3–0.8). Meanwhile, the copolymerization was also conducted in anisole at 110 °C under similar conditions so that the effect of the reaction media on the polymerization could be evaluated. The monomer reactivity ratios showed that the tendency to form alternating copolymers for the two monomers was stronger in ionic liquids than in anisole. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3360–3366, 2002     

Synthesis and reactivity ratios of regioisomeric vinyl‐1,2,3‐triazoles with styrene

The free radical reactivity ratios between styrene and different vinyl‐1,2,3‐triazole regioisomeric monomers in 1,4‐dioxane at 65 °C have been established using nonlinear least square method. The results obtained for the reactivity ratio between regioisomers show exceptionally different polymerization behavior, highlighting the effects of the electronic and steric factors of these regioisomeric monomers. The experimental results highlight the effects of the electronic and sterics on the copolymerization behavior. In case of 1,4‐vinyl‐triazoles, it was found that without the steric effects, the reactivity is very similar to that of styrene and forms random copolymers. However, it was found that 1,5‐vinyl‐triazoles are more reactive than 1,4‐vinyl triazoles. In the case of styrene‐co‐1,4‐vinyl‐1,2,3‐triazoles, the reactivity ratios were calculated to be r_styrene: r_{1‐octyl‐4‐vinyl‐triazole} = 1.97:0.54, r_styrene : r_{1‐benzyl‐4‐vinyl‐triazole} = 1.62:0.50, and r_styrene: r_{1‐methyl‐4‐vinyl‐triazole} = 0.90:0.87. On the other hand, reactivity ratios for styrene‐co‐1,5‐vinyl‐1,2,3‐triazoles were found to be r_styrene: r_{1‐octyl‐5‐vinyl‐triazole} = 0.13:0.66 and r_styrene: r_{1‐benzyl‐5‐vinyl‐triazole} = 0.34:0.49. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3359–3364