血液冷藏箱的低温高效及可溯源研究

血液冷藏运输要求极其苛刻,针对其低温冷藏要求和运输规范,做了保温性能及数据可靠性方面的研究。通过采用真空绝热保温箱、高精度温度传感器、GPS/BDS双模导航、结合终端APP/WEB做了实验研究和数据分析。实验结果表明,该方法不仅能够延长血液冷藏期,而且可以实时监控血液冷藏箱运输过程中的温度及位置变化,最终通过终端自动生成温度分布图像和运动轨迹图像,因而保障输血者获得优质血液。该系统为血液、疫苗等生物制品的冷链物流运输装备提供了理论依据及技术支持。     

相变蓄冷材料的研究进展

变蓄冷材料具有较高的储能密度,在能源高效利用和节能等方面有着广阔的应用前景。本文对固液相变点在20℃以下的相变蓄冷材料进行了分类,并详细地总结了目前研究较多的和已经商用的各类相变材料及其热物性参数,比较了不同种类相变材料的热物性和化学性质。最后,本文对相变蓄冷材料的研究和应用前景进行了展望。     

空调蓄冷材料研究现状及其新进展

分析了空调蓄冷材料研究现状及存在的一些问题 ,提出研制一种新型空调复合蓄冷材料 ,通过实验 ,分析该蓄冷材料的融点、融解热等热学性能。并通过实验研究寻找到了一种新型空调蓄冷材料 ,测试结果表明该蓄冷材料具有较高的相变潜热、适宜的相变温度和较好的热稳定性 ,因此可被应用于蓄冷空调系统中。     

高温水蓄冷空调的原理和理论分析

介绍了一种新型高温水蓄冷空调方案的原理井进行了理论分析。它可利用高至３８℃水的显热或其它材料的相变潜热来蓄冷空调．分析了完全不掺混系统的性能与过冷水流率的关系；给出了完全掺混系统非稳态循环的性能变化；数值计算并讨论了蓄冷水部分掺混系统的温度分层和动态特性、为高温水蓄冷空调系统的设计和运行提供了理论指导．     

相变蓄冷材料制备及热性能研究

制备了一种空调用相变蓄冷材料,该蓄冷材料由两种相变材料(辛酸和软脂酸)组成,通过加热搅拌的方法将其制备成均匀的共晶相变蓄冷材料,实验分析了所研制的蓄冷材料的相变点、相变潜热等性能。测试结果表明该相变蓄冷材料具有适宜的相变温度和较高的相变潜热,可用作空调蓄冷材料。     

两级4K-脉冲管制冷机数值模拟

针对工作在液氦温区的两组4K-脉冲管制冷机的特性，为模拟和动态显示其内部工作过程和参数变化规律，发展了一种新的欧拉-拉格朗日数值计算模型。采用拉格朗日方法，用移动网格跟踪脉冲管中气体微元随周期性压力波动的具体运动轨迹；采用欧拉法，用固定网格直接模拟蓄冷器内部的动态参数变化。模型还考虑了实际气体工质（氦气）的热物性变化、多层磁性蓄冷材料、冷热端换热器及蓄冷器填料的压力降和非平衡换热等。并采用该模型数值分析一典型两极4K-脉冲管制冷机的气体温度、压力、流量和焓流在一个周期内的变化情况，分析了多层磁性蓄冷材料对制冷机性能的影响。     

低温纳米复合相变蓄冷材料热物性研究

低温相变蓄冷的关键是蓄冷材料的开发.本文针对啤酒工艺对冷源温度的要求,选择BaCl2共晶盐水溶液为相变蓄冷材料基液,在基液中添加粒径为20nm的TiO2纳米粒子,形成具有蓄冷功能的纳米复合材料.对其热物性如导热系数、相变潜热、相变温度、过冷度及粘度进行了实验测量和分析.结果表明,在TiO2纳米粒子的质量分数为1%的情况下,纳米复合蓄冷材料的导热系数比基液提高了11.28%,过冷度从3.97℃降为1.21℃,同时粘度增加了21.7%,相变潜热略有降低.     

冷藏陈列柜相变蓄冷搁架的强化传热特性研究

为了降低冷藏陈列柜在融霜过程中食品温度的上升和改善柜内温度场分布,设计了带有相变蓄冷材料的热管型搁架,研究其传热性能。结果发现:热管改善了蓄冷搁架前后方向的传热性能,但左右两侧温度分布不均匀。针对此问题提出了在蓄冷搁架内添加肋片进行强化传热,研究结果表明:在蓄冷搁架中添加肋片可以使搁架温度场均匀性得到改善,显著提高蓄冷搁架的蓄冷速率。     

复合低温相变蓄冷材料的实验研究

提出自行研制的一种复合低温相变蓄冷材料,通过实验分析了该蓄冷材料的融点、相变潜热和凝固融化过程曲线.该材料由有机物和无机物混合而成,用示差扫描量热仪(DSC)来测定该蓄冷材料的融点、相变潜热;用低温冰箱测试凝固融化过程材料的均匀稳定性.实验结果表明,该材料具有良好的性能,适用于医药、食品、冰箱及冷库等蓄冷装置中.     

蓄冷球堆积床动态充冷性能模拟

根据蓄冷球和载冷剂之间的能量平衡,建立了蓄冷球堆积床充冷过程的数理模型。该模型考虑了载冷剂与蓄冷球之间的换热系数变化、载冷剂的导热、相变蓄冷材料的过冷度以及蓄冷球堆积床热损失的影响。采用数值计算方法模拟了蓄冷球堆积床的充冷过程,讨论了载冷剂入口温度、初始温度和流速对充冷过程蓄冷材料温度、载冷剂温度和蓄冰率的影响。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.