Doping of TiO2–GO and TiO2–rGO with Noble Metals: Synthesis,Characterization and Photocatalytic Performance for Azo Dye Discoloration

The nanocomposites of titania coupled with graphene oxide (GO) and reduced graphene oxide (rGO), respectively, were prepared by homogeneous hydrolysis with urea. Graphene was obtained by effect of high‐intensity cavitation field on natural graphite in the presence of strong aprotic solvents in pressurized ultrasonic reactor. The morphology of TiO₂–GO and TiO₂–rGO composites was assessed by scanning electron microscopy and atomic force microscopy. The nitrogen adsorption–desorption was used for determination of surface area (BET) and porosity. Raman and IR spectroscopy were used for qualitative analysis and diffuse reflectance spectroscopy was employed to estimate band‐gap energies. Further enhancement of the photocatalytic activity was attained by codoping of composites with noble metals—Au, Pd and Pt. The photocatalytic activity of TiO₂–GO and TiO₂–rGO were assessed by photocatalytic decomposition of Orange II dye in an aqueous slurry under UV and visible light irradiation. The photocatalytic activity of noble metals codoped samples was determined with decomposition of Reactive Black 5 azo dye.     

Photocatalytic activity of polyaniline/Fe-doped TiO2 composites by in situ polymerization method

This study was focused on the photocatalytic activity of polyaniline (Pani)/iron doped titanium dioxide (Fe–TiO₂) composites for the degradation of methylene blue as a model dye. TiO₂ nanoparticles were doped with iron ions (Fe) using the wet impregnation method and the doped nanoparticles were further combined with Pani via an in situ polymerization method. For comparison purposes, Pani composites were also synthesized in the presence undoped TiO₂. The photocatalyst and the composites were characterized by standard analytical techniques such as FTIR, XRD, SEM, EDX and UV–Vis spectroscopies. Fe–TiO₂ and its composites exhibited enhanced photocatalytic activity under ultraviolet light irradiation. Improved photocatalytic activity of Fe–TiO₂ was attributed to the dopant Fe ions hindering the recombination of the photoinduced charge carriers. Pani/Fe–TiO₂ composite with 30?wt.% of TiO₂ nanoparticles achieved 28% dye removal and the discoloration rate of methylene blue for the sample was 0.0025?min^?1. FTIR, XRD, SEM, EDX and UV–Vis spectroscopies supported the idea that Fe ions integrated into TiO₂ crystal structure and Pani composites were successfully synthesized in the presence of the photocatalyst nanoparticles. The novelty of this study was to investigate the photocatalytic activity of Pani composites, containing iron doped TiO₂ and to compare their results with that of Pani/TiO₂.     

Defect induced nickel,nitrogen-codoped mesoporous TiO2 microspheres with enhanced visible light photocatalytic activity

Nickel, nitrogen-codoped mesoporous TiO₂ microspheres (Ni–N–TiO₂) with high surface area, and an effective direct band gap energy of ∼2.58 eV. Nickel sulfate used as the Ni source and ammonia gas as the N source here. The efficiency of the as-prepared samples was investigated by monitoring the degradation of Rhodamine B under visible light irradiation. The experimental results indicate that Ni-doped mesoporous TiO₂ microspheres show higher photocatalytic activity than mesoporous TiO₂ microspheres under visible light irradiation. It mainly due to that the electron trap level (Ni²⁺/Ni⁺) promoting the separation of charge carriers and the oxygen vacancies inducing the visible light absorption. In addition, Ni–N–TiO₂ shows enhanced activity compared with Ni–TiO₂. Codopants and dopants are found to be uniformly distributed in TiO₂ matrix. Among the all samples the 0.5% molar quantity of Ni dopant and 500 °C 2 h nitriding condition gives the highest photocatalytic activity. The treatment of ammonia gas on Ni–TiO₂ sample induced oxygen vancancies, substitutional and interstitial N. A suitable treatment by ammonia gas also promote separation of charge carriers and the absorption of visible light. The active species generated in the photocatalytic system were also investigated. The strategy presented here gives a promising route towards the development of a metal and non-metal codoped semiconductor materials for applied photocatalysis and related applications.     

Photocatalytic activity of nitrogen and copper doped TiO2 nanoparticles prepared by microwave-assisted sol-gel process

Cu and N-doped TiO₂ photocatalysts were synthesized from titanium (IV) isopropoxide via a microwave-assisted sol-gel method. The synthesized materials were characterized by X-ray diffraction, UV-vis diffuse reflectance, photoluminescence (PL) spectroscopy, SEM, TEM, FT-IR, Raman spectroscopy, photocurrent measurement technique, and nitrogen adsorption–desorption isotherms. Raman spectra and XRD showed an anatase phase structure. The SEM and TEM images revealed the formation of an almost spheroid mono disperse TiO₂ with particle sizes in the range of 9-17 nm. Analysis of N₂ isotherm measurements showed that all investigated TiO₂ samples have mesoporous structures with high surface areas. The optical absorption edge for the doped TiO₂ was significantly shifted to the visible light region. The photocurrent and photocatalytic activity of pure and doped TiO₂ were evaluated with the degradation of methyl orange (MO) and methylene blue (MB) solution under both UV and visible light illumination. The doped TiO₂ nanoparticles exhibit higher catalytic activity under each of visible light and UV irradiation in contrast to pure TiO₂. The photocatalytic activity and photocurrent ability of TiO₂ have been enhanced by doping of the titania in the following order: (Cu, N) - codoped TiO₂ > N-doped TiO₂ > Cu-doped TiO₂ > TiO₂. COD result for (Cu, N)-codoped TiO₂ reveals ∼92% mineralization of the MO dye on six h of visible light irradiation.     

Sonochemical synthesis of Fe–TiO2–SiC composite for degradation of rhodamine B under solar simulator

Fe–TiO₂–SiC composite with photocatalytic activity has been synthesized by a low cost sonochemical process in the presence of citric acid. The addition of citric acid during the sonochemical process allows the formation of a photocatalytic coating of Fe–TiO₂ onto silicon carbide. Experimental characterization results indicate that the composite was formed over all the surface of the silicon carbide (SiC) with an anatase crystalline TiO₂ phase with iron incorporation. The incorporation of iron narrows the band gap of TiO₂ which allow the absorbtion of light with a large wavelength. The obtained Fe–TiO₂–SiC composite exhibits good enhanced photocatalytic activity for the degradation of rhodamine B under solar simulator irradiation in comparison with the commercial TiO₂–P25.     

Photocatalytic degradation of triazine dyes over N-doped TiO2 in solar radiation

Photocatalytic degradation of the reactive triazine dyes Reactive Yellow 84 (RY 84), Reactive Red 120 (RR 120), and Reactive Blue 160 (RB 160) on anatase phase N-doped TiO₂ in the presence of natural sunlight has been carried out in this work. The effect of experimental parameters like initial pH and concentration of dye solution and dosage of the catalyst on photocatalytic degradation have also been investigated. Adsorption of dyes on N-doped TiO₂ was studied prior to photocatalytic studies. The studies show that the adsorption of dyes on N-doped TiO₂ was high at pH 3 and follows the Langmuir adsorption isotherm. The Langmuir monolayer adsorption capacity of dyes on N-doped TiO₂ was 39.5, 86.0, and 96.3 mg g^?1 for RY 84, RR 120, and RB 160, respectively. The photocatalytic degradation of the dyes follows pseudo first-order kinetics and the rate constant values are higher for N-doped TiO₂ when compared with that of undoped TiO₂. Moreover, the degradation of RY 84 on N-doped TiO₂ in sunlight was faster than the commercial Aeroxide^® P25. However, the P25 has shown higher photocatalytic activity for the other two dyes, RR 120 and RB 160. The COD of 50 mg l^?1 Reactive Yellow-84, RR 120 and RB 160 was reduced by 65.1, 73.1, and 69.6 %, respectively, upon irradiation of sunlight for 3 h in the presence of N-doped TiO₂. The photocatalyst shows low activity for the degradation of RY 84 dye, when its concentration was above 50 mg l^?1, due to the strong absorption of photons in the wavelength range 200–400 nm by the dye solution. LC–MS analysis shows the presence of some triazine compounds and formimidamide derivatives in the dye solutions after 3 h solar light irradiation in the presence of N-doped TiO₂.     

Effective band gap reduction of titanium oxide semiconductors by codoping from first‐principles calculations

Doping is an efficient approach to narrow the band gap of TiO₂ and enhance its photocatalytic activity. Here, we perform generalized gradient approximation (GGA)+U calculations to narrow the band gap of TiO₂ by codoping of X (F, N) with transition metals (TM = Fe, Co) to extend the absorption edge to longer visible‐light wavelengths. Our results show that all the codoped systems can narrow the band gap significantly, in particular, (F+Fe)‐codoped system could serve as remarkably better photocatalysts with both narrowing of the band gap and relatively smaller formation energies than those of (F+Co) and (N+TM)‐codoped systems. Our results provide useful guidance for codoped TiO₂ efficient for photocatalytic activity. © 2013 Wiley Periodicals, Inc.     

Characterization of Titanium Dioxide Doped with Nitrogen and Sulfur and its Photocatalytic Appraisal for Degradation of Phenol and Methylene Blue

The degradation of organic dyes in the presence of modified TiO₂ is still under intensive investigation. We report here an evaluation of the photocatalytic activity of nitrogen‐ (N‐) and sulfur‐ (S‐) doped TiO₂ for the degradation of phenol and methylene blue (MB). N‐doped TiO₂ (N–TiO₂), S‐doped TiO₂ (S–TiO₂), and N–S‐doped TiO₂ (N–S–TiO₂) were prepared using the sol–gel method. The photocatalytic activity was evaluated in a batch reactor using phenol and MB as models of pollutants. In addition, this investigation was performed using a household lamp as the visible light source. Properties of the synthesized materials in terms of Brunauer–Emmett–Teller (BET) surface analysis, field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and photocatalytic ability were examined. Our study shows that N–S–TiO₂ exhibits better photocatalytic degradation ability for all the considered dyes compared to the other doped TiO₂ materials. In conclusion, we have successfully prepared and evaluated the photocatalytic activity of N‐ and S‐doped TiO₂ for the degradation of phenol and MB using an ordinary household lamp.     

Pt deposited TiO2 catalyst fabricated by thermal decomposition of titanium complex for solar hydrogen production

C, N codoped TiO₂ catalyst has been synthesized by thermal decomposition of a novel water-soluble titanium complex. The structure, morphology, and optical properties of the synthesized TiO₂ catalyst were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and UV–vis diffuse reflectance spectroscopy. The photocatalytic activity of the Pt deposited TiO₂ catalysts synthesized at different temperatures was evaluated by means of hydrogen evolution reaction under both UV–vis and visible light irradiation. The investigation results reveal that the photocatalytic H₂ evolution rate strongly depended on the crystalline grain size as well as specific surface area of the synthesized catalyst. Our studies successfully demonstrate a simple method for the synthesis of visible-light responsive Pt deposited TiO₂ catalyst for solar hydrogen production.     

Facile one-pot hydrothermal synthesis of B/N-codoped TiO2 hollow spheres with enhanced visible-light photocatalytic activity and photoelectrochemical property

B/N-codoped TiO₂ hollow spheres (B/N-THs) were synthesized by facile one-pot hydrothermal method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), N₂ adsorption-desorption isotherms, UV–vis diffuse reflectance spectrum (DRS) and X-ray photoelectron spectroscopy (XPS). The B/N-THs have large surface areas (up to 172.1 m² g⁻¹). The photocatalytic activities of as-prepared THs were evaluated by degradation of Reactive Brilliant Red dye X-3B solution under visible light irradiation. The results showed that B/N-THs exhibited the highest photocatalytic activity due to their high surface area and synergetic effect of B/N-codoped. A photocurrent–time spectrum was examined by anodic photocurrent response to characterize the electron-transferring efficiency in the process of photocatalysis reaction.     

Photocatalytic Degradation of Organic Reactive Dyes over MnTiO3/TiO2 Heterojunction Composites Under UV‐Visible Irradiation

In this study, the photocatalytic degradation of organic reactive dyes have been investigated using MnTiO₃/TiO₂ heterojunction composites in the presence of electron acceptors under UV‐Visible light irradiation. This MnTiO₃/TiO₂ heterojunction composites were prepared by annealing different mass ratios of pyrophanite MnTiO₃ (3–11 wt%) and TiO₂ at 300°C. All the MnTiO₃/TiO₂ heterojunction composites were characterized by spectral techniques like X‐ray diffraction (XRD), scanning electron microscope (SEM) and diffused reflectance UV‐visible spectroscopic analysis (DRS). Among them, 9 wt% MnTiO₃/TiO₂ heterojunction composites exhibited higher photocatalytic activity for the degradation of Reactive Blue 4 (RB 4). The photocatalytic efficiency of 9 wt% MnTiO₃/TiO₂ heterojunction composites was further enhanced by the addition of substantial amount of electron acceptors like hydrogen peroxide (H₂O₂) and ammonium peroxydisulfate ([NH₄]₂S₂O₈). The presence of oxidants (electron acceptors) facilitates the fast degradation of dye solution even in higher concentration upto 200 mg/L. The photocatalytic activity of MnTiO₃/TiO₂ heterojunction composites was also studied for the degradation of other four different structured reactive dyes. The extent of mineralization of these organic reactive dyes during photocatalytic degradation was estimated from COD analysis. MnTiO₃/TiO₂ heterojunction composites was also found to have good photostability in the presence of oxidants.     

Solar active nano-TiO2 for mineralization of Reactive Red 120 and Trypan Blue: 1st Nano Update

Nano-TiO₂ was synthesized by sol–gel method. The catalyst was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) images, transmission electron microscope (TEM), BET surface area measurement and DRS analysis. The formation of anatase phase nano-TiO₂ was confirmed by XRD measurements and its crystalline size is found to be 15.2 nm. SEM images depict the crystalline nature of prepared TiO₂. The BET surface area of prepared TiO₂ is found to be 86.5 m² g^?1 which is higher than that of commercially available TiO₂–P25. The photocatalytic activity of prepared anatase phase TiO₂ has been tested for the degradation of two azo dyes: Reactive Red 120 (RR 120) and Trypan Blue (TB) using solar light. The photocatalytic activity of nano-TiO₂ is higher than TiO₂–P25 under solar light. The mineralization of dyes has been confirmed by chemical oxygen demand (COD) measurements.     

Sustainable fabrication of silver-titania nanocomposites using goji berry (Lycium barbarum L.) fruit extract and their photocatalytic and antibacterial applications

Silver-titania nanocomposites (Ag-TiO₂ NCs) have unique functional attributes due to their photocatalytic and antibacterial properties. In this study, titania nanoparticles (TiO₂-NPs) were successfully in-situ decorated with silver nanoparticles (Ag-NPs) using the aqueous extract of goji berries (Lycium barbarum L.) as a bioreducing and stabilizing agent. Different Ag-TiO₂ NCs were synthesized by treating different concentrations of silver nitrate with a specific concentration of TiO₂-NPs in the presence of fruit extract. The green-synthesized NCs were characterized using several techniques viz., ultraviolet–visible spectrophotometry, X-ray diffractometry (XRD), scanning electron microscopy, field-emission transmission electron microscopy (FE-TEM), Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. XRD analysis revealed the formation of face-centered cubic (fcc) crystals, and FE-TEM analysis revealed the embedment of Ag-NPs throughout the surface of TiO₂-NPs. The average size of Ag-NPs on TiO₂-NPs increased from 11.2 ± 3.05 nm to 16.4 ± 4.5 nm with an increase in the concentration of silver ions, and the morphology of Ag-NPs was predominantly quasi-spherical and hexagonal. These NCs exhibited an excellent photocatalytic degradation of an azo dye, methylene blue (MB). The synthesized Ag-TiO₂ NCs (3:1) showed higher photocatalytic degradation efficiency of ∼ 93.4% for MB in 130 min under visible light irradiation. Ag-TiO₂ NC_S also exhibited good antibacterial activities towards Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). Therefore, the formation of Ag-NPs on the surface of TiO₂-NPs to form Ag-TiO₂ NCs exhibits eco-friendly photocatalytic degradation of azo dye contaminants as well as antibacterial activity.     

Enhanced photocatalytic degradation of rhodamine B under visible light irradiation on mesoporous anatase TiO2 microspheres by codoping with W and N

Mesoporous anatase TiO₂ microspheres were prepared via solvothermal method. Ammonium tungstate was used as the W source, and ammonia gas flowing in an ammonothermal reactor as the N source for codoping. TiO₂:(W,N) mesoporous microspheres, which were prepared from solvothermal treatment at 160 °C for 16 h and thermal ammonolysis at 500 °C for 2 h after calcination, have high specific surface area of 106 m² g⁻¹. XPS results indicate the presence of N_O, N_i and W⁶⁺ in the codoped mesoporous TiO₂ microspheres. Monodoping with N shifts the absorption band edge of anatase TiO₂ from ultraviolet region to visible region. Although codoping with W makes the visible light absorbance decrease a little, the photocatalytic degradation of a cationic dye rhodamine B (RhB) on mesoporous TiO₂:(W,N) microspheres is increased to 1.7 times of that on mesoporous TiO₂:N microspheres. This may due to decreasing recombination centers by W-doping charge compensation.     

A comparative study on characterization and photocatalytic activities of gadolinium–boron codoped and mono-doped TiO2 nanoparticles

Gadolinium?Cboron codoped and mono-doped TiO₂ nanoparticles were prepared using a sol?Cgel method, and tested for photocatalytic activity by the UV light after a further calcination process. For comparison, a pure TiO₂ sample was also prepared and tested under the same conditions. The prepared catalysts were characterized by X-ray diffraction, scanning electron microscope, and UV?CVis spectra. The photocatalytic activity of the samples was evaluated through the photo-degradation of three different dyes under UV light. The experiments demonstrated that the gadolinium?Cboron codoped TiO₂ (Gd?CB?CTiO₂) sample calcined at 500?°C possessed the best photocatalytic activity, and the photodegradation rate of the Reactive Brilliant Red K2G aqueous solution could reach to 95.7% under UV irradiation for 80?min. The results showed that Gd?CB?CTiO₂ has smaller crystallite size and higher photocatalytic activity than that of mono-doped TiO₂ samples and undoped TiO₂.     

Elaboration of nano titania-magnetic reduced graphene oxide for degradation of tartrazine dye in aqueous solution

In this paper, magnetic nanocomposites are synthesized by loading reduced graphene oxide (RG) with two components of nanoparticles consisting of titanium dioxide (TiO₂) and magnetite (Fe₃O₄) with varying amounts. The structural and magnetic features of the prepared composite photocatalysts were investigated by powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectra (UV–vis/DRS), Raman and vibrating sample magnetometer (VSM). The resulting TiO₂/magnetite reduced graphene oxide (MRGT) composite demonstrated intrinsic visible light photocatalytic activity, on degradation of tartrazine (TZ) dye from a synthetic aqueous solution. Specifically, it exhibits higher photocatalytic activity than magnetite reduced graphene oxide (MRG) and TiO₂ nanoparticles. The photocatalytic degradation of TZ dye when using MRG and TiO₂ for 3 h under visible light was 35% and 10% respectively, whereas for MRGT it was more than 95%. The higher photocatalytic efficiency of MRGT is due to the existence of reduced graphene oxide and magnetite which enhances the photocatalytic efficiency of the composite in visible light towards the degradation of harmful soluble azo dye (tartrazine).     

Solvothermal synthesis of WO3/TiO2/carbon fiber composite photocatalysts for enhanced performance under sunlight illumination

Carbon fiber (CF)‐based WO₃/TiO₂ composite catalysts (WO₃/TiO₂/CF) were successfully synthesized by solvothermal method. The catalysts were characterized by XPS, SEM, BET, XRD, FTIR, Raman and UV–Vis. The analyses confirmed the WO₃/TiO₂ nanoparticles with high crystallinity deposited on the carbon structure. The photocatalytic degradation of Orange II azo dye under UV and sunlight illumination with the synthesized catalyst was explored. The composite catalyst displayed high performance (85%) for Orange II degradation while that of for WO₃/TiO₂ was found as 76%. The effects of CF amount, solution pH, initial dye concentration and catalyst dose on photocatalytic performance were studied. It was found that the degradation efficiency increased from 68% to 90% with the increasing CF amount from 3 wt% to 5 wt%, while the further increase in CF amount (7–10 wt%) decreased the photodegradation due to the blocking the active sites of WO₃/TiO₂. The enhanced photocatalytic efficiency was mainly attributed to the electrical properties of the CF and reduced bandgap.     

Characterization of Visible Light Response N-F Codoped TiO2 Photocatalyst Prepared by Acid Catalyzed Hydrolysis

N-F codoped TiO₂ (TONF) photocatalysts were prepared using acid catalyzed hydrolysis method from mixed aqueous solution of TiCl₄ and NH₄F. The photocatalytic activity of the TONF was evaluated through the degradation of phenol under both visible and UV light irradiation. X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), scanning electron microscope (SEM), and N₂ adsorption isotherm were used to characterize the obtained powders. The results showed that N-F codoped TiO₂ exhibited significant improvement of visible light catalytic activity. N-F codoping could improve dispersion of TiO₂, inhibit particle size agglomeration, and retard phase transformation. Doped N could extend the light response of TiO₂ to visible light region. In addition, narrower band gap formed by F-doping was beneficial to the high visible light photocatalytic activity.     

Superior Photostability and Photocatalytic Activity of ZnO Nanoparticles Coated with Ultrathin TiO2 Layers through Atomic‐Layer Deposition

Atomic‐layer deposition (ALD) is a thin‐film growth technology that allows for conformal growth of thin films with atomic‐level control over their thickness. Although ALD is successful in the semiconductor manufacturing industry, its feasibility for nanoparticle coating has been less explored. Herein, the ALD coating of TiO₂ layers on ZnO nanoparticles by employing a specialized rotary reactor is demonstrated. The photocatalytic activity and photostability of ZnO nanoparticles coated with TiO₂ layers by ALD and chemical methods were examined by the photodegradation of Rhodamine B dye under UV irradiation. Even though the photocatalytic activity of the presynthesized ZnO nanoparticles is higher than that of commercial P25 TiO₂ nanoparticles, their activity tends to decline due to severe photocorrosion. The chemically synthesized TiO₂ coating layer on ZnO resulted in severely declined photoactivity despite the improved photostability. However, ultrathin and conformal ALD TiO₂ coatings (≈0.75–1.5 nm) on ZnO improved its photostability without degradation of photocatalytic activity. Surprisingly, the photostability is comparable to that of pure TiO₂, and the photocatalytic activity to that of pure ZnO.     

Photodegradation of Direct Blue-199 in carpet industry wastewater using iron-doped TiO2 nanoparticles and regenerated photocatalyst

Fe-doped TiO_2, Ti_1–xFe_xO₂ (x = 0.00, 0.02, 0.04, 0.06, 0.08, and 0.10), photocatalysts have been successfully synthesized via citric acid–assisted autocombustion method. The synthesized photocatalysts were characterized using different characterization techniques, such as X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), Fourier transform infrared (FT-IR), transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDX), and x-ray photoelectron spectroscopy (XPS). The XRD diffraction patterns revealed that synthesized photocatalysts have the anatase phase of TiO₂. The DRS analysis indicates a slight increment in absorbance in the visible light region by the Fe doping in TiO₂. The FT-IR spectra reveal the various stretching and bending vibrational bands of the Ti–O lattice. The XPS spectra confirm the presence of elements titanium, oxygen, and iron in the synthesized samples and determine binding energy of elements. TEM analysis shows the shape of the synthesized photocatalyst, and it was used to calculate the average particle sizes of undoped and Fe-doped TiO₂ (Ti_0.96Fe_0.04O₂) photocatalysts using a histogram. The photocatalytic activities of synthesized photocatalysts were determined by photodegradation of dye (Direct Blue 199), contaminating carpet industry wastewater in the photochemical reactor and open pan reactor. The maximum photodegradation activity was shown by the Ti_0.96Fe_0.04O₂ photocatalyst among all the synthesized undoped and Fe-doped photocatalysts. The synthesized photocatalyst (Ti_0.96Fe_0.04O₂) had better photocatalytic activity when compared to both, undoped TiO₂ and Aeroxide (Degussa) P-25. The used Fe-doped TiO₂ photocatalyst (Ti_0.96Fe_0.04O₂) was regenerated five times and investigated for its photocatalytic activity.