Determination of a new calcium antagonist in human plasma by liquid extraction enrichment and HPLC with UV detection

Summary An HPLC method has been developed for the determination of SL 85.1016, a new calcium antagonist arylbenzylamide methylthioether derivative. SL 85.1016 and the internal standard, SL 87.0210, are extracted from alkaline human plasma withn-hexane and back extracted into 0.05 M phosphate buffer (pH 2.5; 0.2 ml). Acetonitrile (50 l) is added to the final aqueous extract in order to prevent absorption of the compounds of interest onto the walls of the glass tube; this solution then is partially processed by HPLC on a C₁₈ column with UV detection (254 nm). The determination limit of the method is 2 ng.ml^–1 of SL 85.1016 in human plasma; the response to the drug is linear in the range 2–200 ng.mg^–1.     

Determination of some selected polycyclic aromatic hydrocarbons in environmental samples by high-performance liquid chromatography with fluorescence detection

Summary Analytical methods for the determination in environmental samples, of some selected Polycyclic Aromatic Hydrocarbons (PAH's), which are included on the EPA Priority Pollutant list, have been developed and evaluated. The methodology involves the extraction of PAH's from water samples by solvent extraction with dichloromethane. Solid samples were ultrasonically extracted with acetone/hexane and the extract was cleaned up on a silica gel/alumina column. The concentrated and cleaned up extracts were analysed by HPLC on a polymeric C₁₈ column using a gradient of acetonitrile/water as the mobile phase and fluorescence detection. Typical detection limits lie in the range of 1–30 ng ml^–1 of the analytes, but after sample pretreatment detection limits of 10–300 ng l^–1 were obtained. The extraction, clean-up and HPLC methodology was applied to the determination of selected PAH's in coal washings samples and the method was validated by the quantification of PAH's in a natural contaminated and a spiked sediment.     

Determination of trace amounts of morpholine and its thermal degradation products in boiler water by HPLC

Summary Morpholine and its amine-type thermal degradation products present in boiler feed water and steam condensate were derivatised with N-succinimidyl-p-nitrophenylacetate. These pre-column derivatives were determined by high-performance liquid chromatography with UV detection at 280 nm. The analytical column was Supelco-sil-ODS with an isocratic mobile phase. Morpholine and its breakdown products were monitored in the range 0.01–10 g ml^–1 with a relative standard deviation of 0.4–3.0%. Chromatographic analysis of boiler feed water and steam condensate samples collected from a boiler servicing a petroleum refinery is described.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

Automated high-performance liquid chromatographic determination of amphetamine in biological fluids using column-switching and on-column derivatization

Summary A rapid and simple liquid-chromatographic method has been developed for on-line quantification of amphetamine in biological fluids. Untreated samples (20 μL) are injected directly into the chromatographic system and purified on a 20 mm×2.1 mm i.d. pre-column packed with 30 μm Hypersil C₁₈ stationary phase. After clean-up the analyte is transferred to the analytical column (125 mm×4 mm i.d., 5 μm LiChrospher 100 RP₁₈) for derivatization and separation using a mixture of acetonitrile and the derivatization reagent (o-phthaldialdehyde andN-acetyl-L-cysteine) as the mobile phase. The experimental conditions for on-line derivatization and resolution of the amphetamine have been optimized, and the results have been compared with those obtained by derivatizing the analyte in pre-column mode. The method described has been applied to the determination of amphetamine in plasma and urine. Good linearity and reproducibility were obtained in the 0.1–10.0 μg mL⁻¹ concentration range, and limits of detection were 25 ng mL⁻¹ and 10 ng mL⁻¹ with UV and fluorescence detection, respectively. The procedure described is very simple and rapid, because no off-line manipulation of the sample is required; the total analysis time is approximately 8 min.     

Ion chromatographic determination of iodide in urine and serum using a tubular ion-selective electrode based on a homogeneous crystalline membrane

The use of a laboratory-made iodide ion-selective electrode with tubular configuration and based on a crystalline membrane (AgI/Ag₂S) as the detector for ion chromatographic determination of iodide in urine and serum is described. A CIS reversed-phase column was coated withN-cetylpyridinium chloride to prepare a low-exchange-capacity analytical column and with hexadecyltrimethylammonium bromide to prepare a concentrator pre-column. A 2.0 ml min^–1 flow rate of deionized water and 0.1 mol 1^–1 KNO₃ solution was used for the pre-concentration and for the chromatographic separation, respectively. For optimum performance of the detector a background level of iodide was added into the column effluent. A linear relationship (r = 0.9997) between tubular electrode potential (as peak height) and iodide concentration in the range 5–400 g 1^–1 and a detection limit of 1.47 g 1^–1 were obtained. The method shows good reproducibility for both peak height (2.2% RSD) and retention time (1.3% RSD). Recoveries on its application to the samples were 93.0–100.9% for urine and 91.4–106.0% for serum.     

Simultaneous determination of cobalt and chromium by ion chromatography with chemiluminescence detection and its application to glass analysis

A method is described for the simultaneous determination of very low levels of Co and Cr by high performance ion chromatography coupled with a chemiluminescence detection system. 0.1M K₂SO₄ solutions, adjusted to pH 3.0, were used as eluent to separate Co(II) and Cr(III) between them and from interferents. The detection system was the chemiluminescence of luminol/ H₂O₂ in alkaline medium catalyzed by such transition metals. Using a matrix solution analogous to soda-lime silica glass (dissolved in acids) calibration graphs were linear up to 0.5 ng ml^–1 for cobalt and up to 250 ng ml^–1 for chromium. The corresponding calculated detection limits (3 s) in such matrix were 0.05 ng ml^–1 and 15 ng ml^–1 for Co and Cr, respectively. The relative standard deviations were 1.4% at 0.5 ng ml^–1 Co level and 2.8% at the 200 ng ml^–1 Cr level. No interferences were observed from the more common metals, particularly those present in glass samples. The ion chromatography/ chemiluminescent method proposed has been successfully applied to the analysis of Co and Cr in glasses.     

Voltammetric determination of methyl parathion, ortho, meta and para nitrophenol with a carbon paste electrode modified with C18

Summary The determination of methyl-parathion (MPT), ortho (ONP), meta (MNP) and para nitrophenol (PNP) has been studied by differential pulse voltammetry with a carbon-paste electrode modified with 50% (w/w) of C₁₈. A study of the influence of the pH in the preconcentration cell and the measurement cell was carried out for an electrode with 50% modifier and an accumulation time of 5 min. The voltammograms were recorded with a sweep rate of 40 mV s^–1 and a pulse amplitude of 50 mV. With the optimum conditions of pH for both of the steps, various other variables were studied. The variables for each compound were optimized and the possibility of application to the determination of a mixture of the four compounds was investigated. The determination limits found for all the compounds are: 2 ng ml^–1 for ONP, 5 ng ml^–1 for MNP, 4.3 ng ml^–1 for PNP and 7.9 ng ml^–1 for MPT. The method was applied to samples of a small lake which gathers rain water and water filtered from land on which cereals are grown.     

Sensitive biomonitoring of phthalate metabolites in human urine using packed capillary column switching liquid chromatography coupled to electrospray ionization ion-trap mass spectrometry

A rapid and sensitive method for the determination of the phthalate monoesters monoethyl phthalate (MEP), monobutyl phthalate (MBP), monobenzyl phthalate (MBzP) and monoethylhexyl phthalate (MEHP), in human urine, using packed capillary column liquid chromatography coupled to electrospray quadrupole-ion trap mass spectrometry (ESI-QITMSⁿ) has been developed. Sample volumes of 200 L of deconjugated and diluted urine were loaded onto a precolumn of 30 mm×0.32 mm I.D. packed with Hypercarb 5 m particles, using a sample carrier consisting of acetonitrile/water (15/85, v/v, adjusted to pH 2 using HCl) with a flow rate of 20 L/min. Backflushed elution onto a 100 mm×0.32 mm I.D. analytical column packed with 5 m Hypercarb particles was conducted using a tetrahydrofuran/water gradient where both solvents contained 10 mM ammonium acetate, at a flow rate of 4 L/min. Determination of the monophthalates was achieved within 8 min. Ionization was performed in the negative mode and the analytes were observed as [M-H]^– at m/z=193.1, 221.1, 255.1 and 277.0 for MEP, MBP, MBzP and MEHP, respectively. Quantification was performed in the multiple reaction monitoring (MRM) mode monitoring the fragments at m/z=121.1, 177.0, 183.0 and 233.0 for MEP, MBP, MBzP and MEHP, respectively. The method was validated over the concentration range 2.5–125 ng/mL in pretreated urine samples, corresponding to 25–1250 ng/mL untreated urine, yielding correlation coefficients in the range 0.996–0.999. The within-assay (n=6) and between-assay (n=6) repeatabilities were in the range 4.0–18% and 4.8–15% RSD, respectively. The mass limits of detection were in the range 32–70 pg, corresponding to concentration limits of detection of 1.6–3.5 ng/mL of untreated urine.     

Determination of trichlormethiazide in human plasma and urine by high-performance liquid chromatography

Summary This paper describes a high-performance liquid chromatographic (HPLC) assay method for the determination of trichlormethiazide (TCM) in human plasma and urine. After extraction and separation on an ODS column TCM from plasma was detected by oxidation in an electrochemical detector (ECD) by a porous graphite electrode. The sensitivity was better than HPLC with UV detection, enabling the determination of 2 ng ml^–1 TCM in human plasma. This method also allows determination of TCM at higher concentrations by exchanging the UV for the electrochemical detector. To study the pharmacokinetics, TCM in plasma and urine was assayed with coefficients of variation in the range 2–3%. The method has the advantages of high sensitivity for plasma assay and high precision with a simple procedure for both plasma and urine samples. Small samples of 0.5 ml plasma per assay also reduced the total volume of plasma needed.     

Use of a solid sensing zone implemented with unsegmented flow analysis for simultaneous determination of thiabendazole and warfarin

For the first time, a solid sensing zone implemented with unsegmented flow analysis is described for the simultaneous determination of two pesticides, thiabendazole and warfarin. The system works as a simple and rapid spectrofluorimetric biparameter sensor. The sensor is based on the retention of the analytes on the sensing solid zone (octadecyl silane C₁₈ gel) placed in the detection zone itself into a quartz flow-cell. A temporary sequentiation in the arrival of the analytes to the sensing zone is achieved by on line separation using a pre-column of the same gel placed just before the flow cell. Thiabendazole is determined the first (using methanol 30% (v/v) as carrier/elution solution) because it passes through the pre-column while warfarin is strongly retained in it. Then, warfarin is conveniently eluted from the pre-column (using methanol 50% (v/v) as carrier/elution solution) the intrinsic fluorescence peak height measured at an excitation wavelength of 309 nm and an emission wavelength of 368 nm is used as analytical signal. Using a low sample volume (40 μl), the analytical signal showed a very good linearity in the range 10-800 ng ml⁻¹ and 2-40 μg ml⁻¹ with detection limits of 2.35 ng ml⁻¹ and 0.54 μg ml⁻¹ for thiabendazole and warfarin, respectively. The sensor was satisfactorily applied to the determination of these two analytes in pesticides and pharmaceutical preparations.     

Indirect determination of perchlorate by atomic absorption spectrometry

A liquid-liquid extraction and determination of perchlorate by atomic absorption spectrometry is described. The method involves extraction of perchlorate with the Schiffs base complex [Co(BPTC)₂]⁺, where BPTC = 2-benzoyl pyridine thiosemicarbazone, in methyl isobutyl ketone in acidic medium and subsequent analysis of cobalt in flame AAS, hence indirectly for perchlorate. The extraction efficiency is 98%. The calibration graph was found to be linear for 1.0–11.4 g ClO ₄ ^– per ml of solvent, and the limit of detection is 30 ng ml^–1. The present method is free from interference of large number of foreign ions. The method has been applied for determination of perchlorate in human blood serum samples spiked with perchlorate, urine and commercial potassium chlorate sample.     

Determination of catecholamines as aminochromes by micellar liquid chromatography with thermal lens spectrophotometric detection

Summary The determination of catecholamines (CAs) using micellar liquid chromatography with thermal lens spectrophotometric detection has been studied. CAs are oxidized with hexacyanoferrate(III) to aminochromes which are separated with a mobile phase of 0.05 M sodium dodecyl sulphate, 7% propanol and 0.03 M citrate buffer, pH 4.8, on a partially endcapped C₁₈ column. The aminochrome-micelles and aminochrome-stationary phase association constants are evaluated. Using the 488 nm line of an Ar⁺ laser with 250 mW pump power the limits of detection are about 4 ng mL^–1. The technique is applied to the determination of unconjugated CAs in urine using isoproterenol as internal standard.     

Determination of V(V), Nb(V) and Ta(V) as their 2-(5-nitro-2-pyridylazo)-5-diethylaminophenol complexes by reversed-phase high performance liquid chromatography

A method for the reversed-phase liquid chromatographic separation and determination of V(V), Nb(V) and Ta(V) as 2-(5-nitro-2-pyridylazo)-5 diethylaminophenol (5-NO₂-PADAP) complexes is reported. The metal complexes were eluted in 9 min with a mobile phase of methanol-water (54 : 46, v/v) containing 10 mmol L^–1 acetate buffer (pH 3.0) on an ODS column. The detection limits for V, Nb and Ta were 0.09, 0.13 and 1.41 ng mL^–1, respectively, with S/N=3. The analysis of a reference sample of a mineral is discussed. The results corresponded to the certified values, and recoveries of 98.3–101.4% have been obtained.     

Spectrophotometric determination of mercury with 5,10,15,20-tetrakis(3-chloro-4-sulfophenyl)porphine by flow injection analysis

5,10,15,20-tetrakis(3-chloro-4-sulfophenyl)porphine (m-Cl-TPPS₄) was synthesized and used for the Spectrophotometric determination of mercury by flow injection analysis. A pseudo-first-order reaction kinetic mechanism was proposed with a rate constant of 0.8 min^–1 for Hg(II) withm-Cl-TPPS₄ in the presence of 8-hydroxyquinoline in a medium of 1.0M acetic acid and sodium acetate buffer solution (pH 6.22). In the optimum conditions of reaction temperature (85 ° C), stopped-flow time (60 s) and sampling volume (100 l), the method's relative standard deviation was 0.82% (n = 12) at 5.0 g ml^–1 mercury, with a linear range of 0–12.0 g ml^–1 and an analytical frequency of 60h^–1. The detection limit (3) was 0.025 g ml^–1. Interference studies showed that most metal ions co-existing with Hg²⁺ could be tolerated at 100-fold excess levels, but Zn²⁺, Cu²⁺ and Mn²⁺ needed to be masked. The method has been applied to the analysis of water samples with satisfactory results.     

Liquid Chromatographic Determination of Glutamine in Cerebrospinal Fluid Using 2-Hydroxynaphthaldehyde Derivatizing Reagent

Summary An analytical procedure has been developed for the selective determination of glutamine from cerebrospinal fluid (CSF) using 2-hydroxynaphthaldehyde derivatizing reagent. Arginine and tyramine could also be determined simultaneously. Separation was on a Phenomenex C-18, (150 × 4.6 mm i.d.) column with methanol: water (63:38 v/v) mobile phase at 1mL min^–1 and UV detection at 330nm. Detection limits for glutamine, arginine, and tyramine were 2.8 ng, 17.4 ng and 3.45 ng injection^–1 (5 L), respectively. A large number of amines and amino acids eluted did not affect the determination of glutamine. The analysis of CSF of four patients suffering from hydrocephalus for glutamine indicated concentrations within range 37.4–11.24 g mL^–1 with coefficient of variation 3.0–6.2%.     

Determination of selenomethionine by high performance liquid chromatography-direct hydride generation-atomic absorption spectrometry

A simple, reliable, trace determination of selenomethionine (Semet) based on a direct hydride generation atomic absorption spectrometric method was developed using sodium tetrahydroborate (0.3% in 0.2% NaOH) and hydrochloric acid (3 M). The method excluded any chemical pretreatment prior to hydride generation (HG). The optimized HG system was successfully coupled with the HPLC system. The detection limit (3σ of blank; n=5), reproducibility (R.S.D. of three successive analyses/day, performed on three different days), and repeatability (R.S.D. of three successive analyses) of the method were 1.08 ng ml⁻¹, 9.8% for 9.04 ng ml⁻¹ and 2.1–9.5% for 30.0–1.27 ng ml⁻¹ Semet as Se (standards prepared in Milli-Q water). Calibration graph was linear up to 30 ng ml⁻¹. This HPLC-HG-AAS method is very promising and successfully determined Semet (spiked) in human urine.     

Determination of moxifloxacin in tablets and human urine by square-wave adsorptive voltammetry

This work presents an electroanalytical methodology developed for square-wave voltammetry based in the electrochemical reduction in hanging mercury drop electrode (HMDE), which is simple, fast, reliable and sensitive for determination of moxifloxacin (MOXI) in tablets and spiked urine human samples. The support electrolyte that provided a more defined and intense peak current for MOXI determination was the phosphate buffer 0.04 mol l^{− 1} pH 8.0. In the best-optimized conditions the drug presented an only peak of reduction at − 1.38 V vs. Ag/AgCl, using an E_acc. of − 0.30 V. An LOD of 0.44 and 3.20 ng ml^{− 1} and an LOQ of 1.46 and 10.60 ng ml^{− 1} were found for the pure standard of moxifloxacin and in the presence of matrix, respectively. A good recovery was obtained for assay spiked urine samples and a good quantification of MOXI was achieved in a commercial formulation. The methodology proposed was more sensitive than the spectrofluorimetric and spectrophotometric method with precision and accuracy equivalent.     

HPLC Determination and Pharmacokinetic Study of Valdecoxib in Human Plasma

A sensitive, simple, and accurate high-performance liquid chromatographic method has been developed for determination of valdecoxib and the internal standard rofecoxib in human plasma. Protein was precipitated from plasma samples by addition of perchloric acid (HClO₄); the drug was then extracted with diethyl ether. Separation was performed on a Cosmosil C₁₈ column (150 mm × 4.6 mm i.d., 5 m particles) with ammonium acetate buffer-acetonitrile, 60:40 (v/v), containing 0.1% TEA, pH 6.5, as mobile phase. Detection and quantification were performed by UV-visible detection at 239 nm. Detection and quantification limits were 3 and 5 ng mL^–1, respectively. The linear concentration range for valdecoxib was 5–400 ng mL^–1. The validated RP HPLC method was used for determination of the pharmacokinetic data for the drug in humans.     

Sensitive Determination of Felodipine in Human and Dog Plasma by Use of Liquid–Liquid Extraction and LC–ESI–MS–MS

Summary A sensitive and selective liquid chromatographic method coupled with electrospray ionization tandem mass spectrometry (LC–ESI–MS–MS) has been developed for quantification of felodipine in human and dog plasma. Compounds were separated on a 2.0 mm × 150 mm, 5.0 m particle, C₈ column with 1 m m ammonium acetate–acetonitrile, 20:80, pH 6.0, as mobile phase at a flow rate of 200 L min^–1. Nifedipine was used as internal standard. Plasma samples were extracted with diethyl ether, the centrifuged upper layer was evaporated, the residue was reconstituted with mobile phase, and the reconstituted samples were injected. The analytical column lasted for at least 1000 injections. By use of multiple reaction monitoring (MRM) mode in MS–MS felodipine and nifedipine were detected without severe interference from the human or dog plasma matrix. Felodipine produced a protonated precursor ion ([M + H]⁺) at m/z 384 and a corresponding product ion at m/z 338. And internal standard (nifedipine) produced a protonated precursor ion ([M + H]⁺) at m/z 347 and a corresponding product ion at m/z 315. Detection of felodipine in human and dog plasma was accurate and precise, with a limit of quantification of 0.05 ng mL^–1. The method has been successfully applied to preliminary pharmacokinetic study of felodipine in human and dog plasma.