Synthesis and Electrochemistry of Heterobimetallic Ruthenium/Platinum and Molybdenum/Platinum Complexes

As starting materials for heterobimetallic complexes, [RuCp(PPh(3))CO(PPh(2)H)]PF(6) and [RuCp(PPh(3))CO(eta(1)-dppm)]PF(6) were prepared from RuCp(PPh(3))(CO)Cl. In the course of preparing [RuCp(eta(2)-dppm)(eta(1)-dppm)]Cl from RuCp(Ph(3)P)(eta(1)-dppm)Cl, the new monomer RuCpCl(eta(1)-dppm)(2) was isolated. The uncommon coordination mode of the two monodentate bis(phosphines) was confirmed by X-ray crystallography [a = 11.490(1) ?, b = 14.869(2) ?, c = 15.447(2) ?, alpha = 84.63(1) degrees, beta = 70.55(1) degrees, gamma = 72.92(1) degrees, V = 2378.7(5) ?(3), d(calc) = 1.355 g cm(-)(3) (298 K), triclinic, P&onemacr;, Z = 2]. The dppm-bridged bimetallic complexes RuCp(PPh(3))Cl(&mgr;-dppm)PtCl(2), RuCpCl(&mgr;-dppm)(2)PtCl(2), and [RuCp(PPh(3))CO(&mgr;-dppm)PtCl(2)]PF(6) each exhibit electrochemistry consistent with varying degrees of metal-metal interaction. The cationic heterobimetallic complexes [Mo(CO)(3)(&mgr;-dppm)(2)Pt(H)]PF(6) and [MoCp(CO)(2)(&mgr;-PPh(2))(&mgr;-H)Pt(PPh(3))(MeCN)]PF(6) were prepared by chloride abstraction from the corresponding neutral bimetallic species and show electrochemical behavior similar to the analogous Ru/Pt complexes.     

Synthetic,structural, electrochemical,and theoretical studies of heterometallic aggregates with a [Pt(2)(mu-S)(2)M] core (M = Hg,Au)

Novel electroactive multimetallic compounds based on the [Pt(2)(mu(2)-S)(2)M] core, viz. [Pt(2)(PPh(3))(4)(mu(3)-S)(2)HgFc]PF(6) (1) [Fc = (eta(5)-C(5)H(4))Fe(eta(5)-C(5)H(5))] and [Pt(2)(PPh(3))(4)(mu(3)-S)(2)Hg(2)Fc'](PF(6))(2) (2) [Fc' = Fe(eta(5)-C(5)H(4))(2)], have been synthesized under the guide of electrospray mass spectrometry. The electrochemistry of these ferrocene funtionalized compounds together with the reported [Pt(2)(PPh(3))(4)(mu(3)-S)(2)HgPPh(3)](PF(6))(2) (3), [Pt(2)(PPh(3))(4)(mu(2)-S)(mu(3)-S)HgPh]PF(6) (4), and [Pt(2)(PPh(3))(4)(mu(2)-S)(mu(3)-S)AuPPh(3)]PF(6) (5) have been investigated using cyclic voltammetry and DFT calculations. These results point to a prominent ligand-based oxidation.     

Reactions of copper(II) salts with 3[5]-tert-butylpyrazole: double-cubane complexes with bound exogenous anions, and a novel pyrazole coordination mode

Reaction of CuX(2) (X(-)=Cl(-), Br(-), NO(3) (-)), NaOH, and 3[5]-tert-butylpyrazole (Hpz(tBu)) in a 1:1:2 molar ratio in MeOH at 293 K for three days affords [[Cu(3)(Hpz(tBu))(6)(mu(3)-X)(mu(3)-OH)(3)](2)Cu]X(6) (X(-)=Cl(-), 1; X(-)=Br(-), 2; X(-)=NO(3)(-), 3) in moderate yields. These compounds contain a centrosymmetric, vertex-sharing double-cubane [[Cu(3)(Hpz(tBu))(6)(mu(3)-X)(mu(3)-OH)(3)](2)Cu](6+) core, surrounded by a belt of six hydrogen-bonded X(-) ions. For 1 and 2, the ring of guest anions has near C(3) symmetry, that is slightly distorted owing to the axis of Jahn-Teller elongation at the central Cu ion. For 3 only, the NO(3)(-) guest ions are crystallographically disordered, reflecting their poor complimentarity with complex host. A similar reaction employing CuF(2) yields [[Cu(3)(Hpz(tBu))(4)(mu-pz(tBu))(2)(mu-F)(2)(mu(3)-F)](2)]F(2) (4), whose structure contains a cyclic hexacopper core with approximate C(2v) symmetry. Finally, an analogous reaction using Cu(NCS)(2) gives a mixture of trans-[Cu(NCS)(2)(Hpz(tBu))(2)] (5) and [Cu(2)(NCS)(2)(mu-pz(tBu))(2)(mu-Hpz(tBu))(Hpz(tBu))(2)] (6). The latter compound contains a Hpzt(Bu) ligand bridging the two Cu ions in an unusual kappa(1),mu-coordination mode. The variable temperature magnetic properties of 1-3 show antiferromagnetic behavior, leading to a S=1/2 ground state in which the seven copper(II) ions are associated into three mutually independent distinct spin systems. In confirmation of this interpretation, Q-band EPR spectra of solid 1 and 2 at 5 K also demonstrate a S= 1/2 spin system and exhibit hyperfine coupling to three (63,65)Cu nuclei. Unusually, the coupling is manifest as an eight-line splitting of the parallel feature, rather than the usual 10 lines. This has been rationalized by a spin-projection calculation, and results from the relative magnitudes of coupling to the three Cu nuclei. UV/Vis and mass spectrometric data show that 1-4 decompose to lower nuclearity species in solution.     

Reactions of the Dirhenium(II) Complexes Re(2)X(4)(dppm)(2) (X = Cl, Br; dppm = Ph(2)PCH(2)PPh(2)) with Isocyanides. 10.(1) Synthesis and Characterization of the Complex [Re(2)Br(3)(&mgr;-dppm)(2)(CO)(2)(CNXyl)]O(3)SCF(3) and Several Isomeric Forms of [Re(2)Br(3)(&mgr;-dppm)(2)(CO)(CNXyl)(2)]Y (Y = PF(6), O(3)SCF(3))

The reactions of the unsymmetrical, coordinatively unsaturated dirhenium(II) complexes [Re(2)Br(3)(&mgr;-dppm)(2)(CO)(CNXyl)]Y (XylNC = 2,6-dimethylphenyl isocyanide; Y = O(3)SCF(3) (3a), PF(6) (3b)) with XylNC afford at least three isomeric forms of the complex cation [Re(2)Br(3)(&mgr;-dppm)(2)(CO)(CNXyl)(2)](+). Two forms have very similar bis(&mgr;-halo)-bridged edge-sharing bioctahedral structures of the type [(CO)BrRe(&mgr;-Br)(2)(&mgr;-dppm)(2)Re(CNXyl)(2)]Y (Y = O(3)SCF(3) (4a/4a'), PF(6) (4b/4b')), while the third is an open bioctahedron [(XylNC)(2)BrRe(&mgr;-dppm)(2)ReBr(2)(CO)]Y (Y = O(3)SCF(3) (5a), PF(6) (5b)). While the analogous chloro complex cation [Re(2)Cl(3)(&mgr;-dppm)(2)(CO)(CNXyl)(2)](+) was previously shown to exist in three isomeric forms, only one of these has been found to be structurally similar to the bromo complexes (i.e. the isomer analogous to 5a and 5b). The reaction of 3a with CO gives the salt [Re(2)Br(3)(&mgr;-dppm)(2)(CO)(2)(CNXyl)]O(3)SCF(3) (7), in which the edge-sharing bioctahedral cation [(XylNC)BrRe(&mgr;-Br)(&mgr;-CO)(&mgr;-dppm)(2)ReBr(CO)](+) has an all-cis arrangement of pi-acceptor ligands. The Re-Re distances in the structures of 4b', 5a, and 7 are 3.0456(8), 2.3792(7), and 2.5853(13) ?, respectively, and accord with formal Re-Re bond orders of 1, 3, and 2, respectively. Crystal data for [Re(2)Br(3)(&mgr;-dppm)(2)(CO)(CNXyl)(2)](PF(6))(0.78)(ReO(4))(0.22).CH(2)Cl(2) (4b') at 295 K: monoclinic space group P2(1)/n (No. 14) with a = 19.845(4) ?, b = 16.945(5) ?, c = 21.759(3) ?, beta = 105.856(13) degrees, V = 7038(5) ?(3), and Z = 4. The structure was refined to R = 0.060 (R(w) = 0.145) for 14 245 data (F(o)(2) > 2sigma(F(o)(2))). Crystal data for [Re(2)Br(3)(&mgr;-dppm)(2)(CO)(CNXyl)(2)]O(3)SCF(3).C(6)H(6) (5a) at 173 K: monoclinic space group P2(1)/n (No. 14) with a = 14.785(3) ?, b = 15.289(4) ?, c = 32.067(5) ?, beta = 100.87(2) degrees, V=7118(5) ?(3), and Z = 4. The structure was refined to R = 0.046 (R(w) = 0.055) for 6962 data (I > 3.0sigma(I)). Crystal data for [Re(2)Br(3)(&mgr;-dppm)(2)(CO)(2)(CNXyl)]O(3)SCF(3).Me(2)CHC(O)Me (7) at 295 K: monoclinic space group P2(1)/n (No. 14) with a = 14.951(2) ?, b = 12.4180(19) ?, c = 40.600(5) ?, beta = 89.993(11) degrees, V = 7537(3) ?(3), and Z = 4. The structure was refined to R = 0.074 (R(w) = 0.088) for 6595 data (I > 3.0sigma(I)).     

Unique asymmetric (CuII4) double-stranded helicate from a hexadentate piperazine-based ligand: ligand conformation isomerism upon coordination

In methanol, the reaction of Cu(ClO(4))(2).6H(2)O and a sterically constrained piperazine imine phenol ligand (H(2)L), in the presence of NEt(3), affords a novel tetranuclear copper(II) complex of formula [Cu(II)(4)(mu(3)-L)(2)(mu-OH)(2)(H(2)O)(2)](ClO(4))(2).H(2)O (1). The X-ray structure of this complex shows an elongated Cu(4) quasi-tetrahedron coordinated to two hexadentate chair-(e,a)-mu(3)-piperazine bridging ligands. Variable-temperature magnetic studies show an S(t) = 0 spin ground state resulting from antiferromagnetic interactions between Cu(II) ions within the complex.     

Synthesis, structures, and magnetic properties of the copper(II), cobalt(II), and manganese(II) complexes with 9-acridinecarboxylate and 4-quinolinecarboxylate ligands

To explore the relationships between the structures of ligands and their complexes, we have synthesized and characterized a series of metal complexes with two structurally related ligands, 9-acridinecarboxylic acid (HL(1)) and 4-quinolinecarboxylate acid (HL(2)), [Cu(2)(mu(2)-OMe)(2)(L(1))(2)(H(2)O)(0.69)](n) 1, [Cu(2)(L(1))(4)(CH(3)OH)(2)] 2, [Cu(3)(L(1))(6)(CH(3)OH)(6)].3H(2)O 3, [Mn(3)(L(1))(6)(CH(3)OH)(6)].3H(2)O 4, [Co(3)(L(1))(6)(CH(3)OH)(6)].3H(2)O 5, [Cu(L(2))(2)](n) 6, [Mn(L(2))(2)(H(2)O)](n) 7, and [Co(L(2))(2)(H(2)O)](n) 8. 1 is a three-dimensional (3D) polymer with an interpenetrating NbO type network showing one-dimensional (1D) channels, whereas 2 and 3 take bi- and trinuclear structures, respectively, because of the differences in basicity of the reaction systems in preparing the three complexes. 4 and 5 have trinuclear structures similar to that of 3. In 1-5, ligand L(1) performs different coordination modes with N,O-bridging in 1 and O,O'-bridging in 2-5, and the metal ions also show different coordination geometries: square planar in 1, square pyramidal in 2, and octahedral in 3-5. 6 has a two-dimensional structure containing (4,4) grids in which L(2) adopts the N,O-bridging mode and the Cu(II) center takes square planar geometry. 7 and 8 are isostructural complexes showing 1D chain structures, with L(2) adopting the O,O-bridging mode. In addition, the intermolecular O-H...N hydrogen bonds and pi-pi stacking interactions further extend the complexes (except 1 and 6), forming 3D structures. The magnetic properties of 2-7 have been investigated and discussed in detail.     

Versatility of dithiophosphates in the syntheses of copper(I) complexes with bis(diphenylphosphino)alkanes: abstraction of chloride from dichloromethane

Reactions of [Cu(CH(3)CN)(4)]X (X = PF(6), BF(4)) with bis(diphenylphosphino)methane (dppm = Ph(2)PCH(2)PPh(2)) and ammonium dialkyldithiophosphates, (NH(4))[S(2)P(OR)(2)] (R = Et, (i)Pr), yield a series of novel Cu(I) polynuclear complexes, trinuclear [Cu(3)(mu-dppm)(3)(mu(3)-Cl){S(2)P(OEt)(2)}] (PF(6)) 1 and [Cu(3)(mu-dppm)(2){S(2)P(OR)(2)}(2)](PF(6)) (R = Et, 2; (i)Pr, 3), tetranuclear [Cu(4)(mu-dppm)(2) {S(2)P(OEt)(2)}(4)] 4, and hexanuclear [Cu(6)(mu-dppm)(2)(mu(4)-Cl){S(2)P(O(i)()Pr)(2)}(4)](BF(4)) 5. Similarly, the reaction of [Cu(2)(mu-L-L)(2)(CH(3)CN)(2)](PF(6))(2) (L-L, dppm, dppe = Ph(2)PCH(2)CH(2)PPh(2)) with (NH(4))[S(2)P(OR)(2)] yields dinuclear [Cu(2)(mu-dppm)(2){S(2)P(OR)(2)}(2)] 6 (R= (i)Pr, 6A; Et, 6B), trinuclear [Cu(3)(mu-dppe)(3)(mu-Cl)(2){S(2)P(O(i)Pr)(2)}] 9, and polymeric [Cu(mu(2)-dppe){S(2)P(OR)(2)}](n) (R = Et, 7; (i)Pr, 8) complexes. The formation of 1 and 5 involved the abstraction of chloride from dichloromethane when the Cu/S(2)P(OR)(2) ratio exceeded 1, but when ratio was 1:1, no Cl abstraction occurred, as in compound 4. Compound 9, however, was obtained as a 12% byproduct in the synthesis of 8 using a 1:1:1 ratio of Cu/dppe/S(2)P(O(i)Pr)(2). The chloride binds to Cu atoms in a mu(3)-Cl mode by capping one face of the Cu(3) triangle of cluster 1. A mu(4)-Cl caps a single tetragonal face of the trigonal prism of cluster 5, and in the cluster 9, two chlorides bond in mu(2)-Cl modes. Both clusters 2 and 3 exhibit the mu(3)-S mode of bonding for dtp ligands. Only cluster 5 exhibited close Cu...Cu contacts (2.997-3.0238 A). All of compounds were characterized by single-crystal X-ray diffraction and pertinent crystallographic data for 1, 5, and 9 are are follows: (1) C(79)H(76)ClCu(3)F(6)O(2)P(8)S(2), triclinic, P, a = 11.213(1) A, b = 14.142(1) A, c = 25.910(2) A, alpha = 95.328(2) degrees , beta = 99.594(2) degrees , gamma = 102.581(2) degrees , V = 3918.2(6) A(3), Z = 2; (5) C(74)H(100)BClCu(6)F(4)O(8)P(8)S(8), monoclinic, P2(1)/n, a = 25.198(4) A, b = 15.990(3) A, c = 25.421(4) A, beta = 106.027(3) degrees , V = 9845(3)A(3), Z = 4; (9) C(84)H(86)Cl(2)Cu(3)O(2)P(7)S(2), monoclinic, C2/c, with a = 24.965(3) A, b = 17.058(2) A, c = 20.253(2) A, beta = 95.351(4) degrees , V = 8587.4(17)A(3), Z = 4.     

One-pot conditional self-assembly of multicopper metallacycles

The self-assembly of supramolecular metallacycles via the coordination-driven directional bonding approach can be modified to produce some unexpected structural variations. The combination of a flexible ligand-capped dinuclear transition-metal acceptor like [Cu(2)(dppm)(2)(NCMe)(2)]X(2) (1X(2); dppm = Ph(2)PCH(2)PPh(2); X(-) = BF(4)(-), PF(6)(-), or BPh(4)(-)) with monodentate-bidentate donors like 2-, 3-, and 4-pyridylcarboxylates produced oligomeric compounds [{Cu(2)(dppm)(2)}(μ-(2-PyCO(2)))](2)X(2) (2X(2)), [{Cu(2)(dppm)(2)}(μ-(3-PyCO(2)))](2)X(2) (3X(2)), and [{Cu(2)(dppm)(2)}(μ-(4-PyCO(2)))](4)X(4) (4X(4)), respectively, as the thermodynamically stable products in one-pot reactions. However, the modified self-assembly is still subject to steric hindrance. The reaction of complex 1(BF(4))(2) with 6-Me-3-PyCO(2)H did not produce a polygonal dimeric metallacycle but a simple dinuclear complex, [Cu(2)(dppm)(2)(6-Me-3-PyCO(2))](BF(4)) (5(BF(4))). The crystal structures of complexes 2(PF(6))(2), 3(PF(6))(2), 4(BF(4))(4), and 5(BF(4)) were determined using X-ray diffraction.     

Construction of a novel copper(I) chain polymer of hexanuclear Cu6(2-SC5H4NH)6I6 cores with a new (mu 3-S) mode of bonding of pyridine-2-thione and of an unusual triangular Cu3I3(dppe)3(2-SC5H4NH) cluster

The reactions of copper(I) iodide with pyridine-2-thione (2-SC(5)H(4)NH) in the presence of a series of diphosphane ligands, Ph(2)P[bond]X[bond]Ph(2)P [X = [bond](CH(2))(m)[bond], m = 1(dppm), 2 (dppe), 3 (dppp), 4 (dppb); [bond]CH[double bond]CH[bond] (dppen)], yielded an iodo-bridged hexanuclear Cu(I) linear polymer, [Cu(6)(mu(3)-SC(5)H(4)NH)(4)(mu(2)-SC(5)H(4)NH)(2)(I(4))(mu-I)(2)-](n).2nCH(3)CN (1). A similar reaction with 1,2-bis(diphenylphosphino)ethane (dppe) and 2-SC(5)H(4)NH yielded a triangular cluster, Cu(3)I(3)(dppe)(3)(2-SC(5)H(4)NH), 2. In the chain polymer 1, three Cu(I) iodide and three 2-SC(5)H(4)NH ligands combined via bridging S donor atoms to form a boat-shaped trinuclear Cu(3)S(3)I(3) core, and two such cores combined in an inverse manner via four S-donor atoms (mu(3)-S) to form a centrosymmetric hexanuclear repeat unit, Cu(6)S(6)I(4)(mu-I)(2-), which finally formed the iodo-bridged infinite linear chain polymer 1. Linear chains are separated by the nonbonded acetonitrile molecules. Polymer 1 is the first such example of a linear chain formed by the hexanuclear Cu(6)S(6)I(6) core in copper chemistry as well as in metal-heterocyclic thioamide chemistry. In addition, it has the first mu(3)-S mode of neutral pyridine-2-thione ever reported. In the moiety Cu(3)I(3)(dppe)(3) of 2, two copper(I) centers are bridged by the iodide ligands forming a Cu(mu-I)(2)Cu core, while a third copper(I) center is terminally bonded to another iodide ligand. Polymer 2 is also rare, and the first triangular cluster of Cu(I) with an heterocyclic thioamide.     

Framework engineering by anions and porous functionalities of Cu(II)/4,4'-bpy coordination polymers

A combination of framework-builder (Cu(II) ion and 4,4'-bipyridine (4,4'-bpy) ligand) and framework-regulator (AF(6) type anions; A = Si, Ge, and P) provides a series of novel porous coordination polymers. The highly porous coordination polymers ([Cu(AF(6))(4,4'-bpy)(2)].8H(2)O)(n)(A = Si (1a.8H(2)O), Ge (2a.8H(2)O)) afford robust 3-dimensional (3-D), microporous networks (3-D Regular Grid) by using AF(6)(2-) anions. The channel size of these complexes is ca. 8 x 8 A(2) along the c-axis and 6 x 2 A(2) along the a- or b-axes. When compounds 1a.8H(2)O or 2a.8H(2)O were immersed in water, a conversion of 3-D networks (1a.8H(2)O or 2a.8H(2)O) to interpenetrated networks ([Cu(4,4'-bpy)(2)(H(2)O)(2)].AF(6))(n)(A = Si (1b) and Ge (2b)) (2-D Interpenetration) took place. This 2-D interpenetrated network 1b shows unique dynamic anion-exchange properties, which accompany drastic structural conversions. When a PF(6)(-) monoanion instead of AF(6)(2)(-) dianions was used as the framework-regulator with another co-counteranion (coexistent anions), porous coordination polymers with various types of frameworks, ([Cu(2)(4,4'-bpy)(5)(H(2)O)(4)].anions.2H(2)O.4EtOH)(n)(anions = 4PF(6)(-) (3.2H(2)O.4EtOH), 2PF(6)(-) + 2ClO(4)(-) (4.2H(2)O.4EtOH)) (2-D Double-Layer), ([Cu(2)(PF(6))(NO(3))(4,4'-bpy)(4)].2PF(6).2H(2)O)(n)(5.2PF(6).2H(2)O) (3-D Undulated Grid), ([Cu(PF(6))(4,4'-bpy)(2)(MeCN)].PF(6).2MeCN)(n)(6.2MeCN) (2-D Grid), and ([Cu(4,4'-bpy)(2)(H(2)O)(2)].PF(6).BF(4))(n) (7) (2-D Grid), were obtained, where the three modes of PF(6)(-) anions are observed. 5.2PF(6).2H(2)O has rare PF(6)(-) bridges. The PF(6)(-) and NO(3)(-) monoanions alternately link to the Cu(II) centers in the undulated 2-D sheets of [Cu(4,4'-bpy)(2)](n)() to form a 3-D porous network. The free PF(6)(-) anions are included in the channels. 6.2MeCN affords both free and terminal-bridged PF(6)(-) anions. 3.2H(2)O.4EtOH, 4.2H(2)O.4EtOH, and 7 bear free PF(6)(-) anions. All of the anions in 3.2H(2)O.4EtOH and 4.2H(2)O.4EtOH are freely located in the channels constructed from a host network. Interestingly, these Cu(II) frameworks are rationally controlled by counteranions and selectively converted to other frameworks.     

Luminescent homo- and heteropolynuclear platinum(II) chalcogenido aggregates based on [Pt2E2(P empty set N)4] units (E=S,Se)

A series of homodinuclear platinum(II) complexes containing bridging chalcogenido ligands, [Pt(2)(mu-E)(2)(P empty set N)(4)] (P empty set N=dppy, E=S (1), Se (2); P empty set N=tBu-dppy, E=S (3)) (dppy=2-(diphenylphosphino)pyridine, tBu-dppy=4-tert-butyl-2-(diphenylphosphino)pyridine) have been synthesized and characterized. The nucleophilicity of the [Pt(2)E(2)] unit towards a number of d(10) metal ions and complexes has been demonstrated through the successful isolation of a number of novel heteropolynuclear platinum(II)-copper(I), -silver(I), and -gold(I) complexes: [[Pt(2)(mu(3)-E)(2)(dppy)(4)](2)Ag(3)](PF(6))(3) (E=S (4); Se (5)) and [Pt(2)(dppy)(4)(mu(3)-E)(2)M(2)(dppm)]X(2) (E=S, M=Ag, X=BF(4) (6); E=S, M=Cu, X=PF(6) (7); E=S, M=Au, X=PF(6) (8); E=Se, M=Ag, X=PF(6) (9); E=Se, M=Au, X=PF(6) (10)). Some of them display short metal.metal contacts. These complexes have been found to possess interesting luminescence properties. Through systematic comparison studies, the emission origin has been probed.     

Dendritic arrays of [Re6(mu3-Se)8]2+ core-containing clusters: exploratory synthesis and electrochemical studies

The reaction between the previously reported site-differentiated cluster solvate [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(MeCN)](SbF(6))(2) (1) with pyridyl-based ditopic ligands 4,4'-trimethylenedipyridine (2), 1,2-bis(4-pyridyl)ethane (3), and (E)-1,2-bis(4-pyridyl)ethene (4) afforded cluster complexes of the general formula [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(L)](SbF(6))(2) (5-7), where L represents one of the pyridyl-based ligands. Reacting these cluster complex-based ligands with the fully solvated cluster complex [Re(6)(mu(3)-Se)(8)(MeCN)(6)](SbF(6))(2) (8) produced dendritic arrays of the general formula {Re(6)(mu(3)-Se)(8)[Re(6)(mu(3)-Se)(8)(PEt(3))(5)(L)](6)}(SbF(6))(14) (9-11), each featuring six circumjacent [Re(6)(mu(3)-Se)(8)(PEt(3))(5)](2+) units bridged to a [Re(6)(mu(3)-Se)(8)](2+) core cluster by the pyridyl-based ligands. Electrochemical studies using a thin-layer electrochemical cell revealed cluster-based redox events in these cluster arrays. For 9 (L = 2), one reversible oxidation event corresponding to the removal of 7 electrons was observed, indicating noninteraction or extremely weak interactions between the clusters. For 10 (L = 3), two poorly resolved oxidation waves were found. For 11 (L = 4), two reversible oxidation events, corresponding respectively to the removal of 1 and 6 electrons, were observed with the 1-electron oxidation event occurring at a potential 150 mV more positive than the 6-electron oxidation. These electrochemical studies suggest intercluster coupling in 11 via through-bond electronic delocalization, which is consistent with electronic spectroscopic studies of this same molecule.     

Structural variation in copper(I) complexes with pyridylmethylamide ligands: structural analysis with a new four-coordinate geometry index, tau4

Four Cu(I) complexes were synthesized with a family of pyridylmethylamide ligands, HL(R) [HL(R) = N-(2-pyridylmethyl)acetamide, R = null; 2,2-dimethyl-N-(2-pyridylmethyl)propionamide, R = Me(3); 2,2,2-triphenyl-N-(2-pyridylmethyl)acetamide, R = Ph(3))]. Complexes 1-3 were synthesized from the respective ligand and [Cu(CH(3)CN)(4)]PF(6) in a 2 : 1 molar ratio: [Cu(HL)(2)]PF(6) (1), [Cu(2)(HL(Me3))(4)](PF(6))(2) (2), [Cu(HL(Ph3))(2)]PF(6) (3). Complex 4, [Cu(HL)(CH(3)CN)(PPh(3))]PF(6), was synthesized from the reaction of HL with [Cu(CH(3)CN)(4)]PF(6) and PPh(3) in a 1 : 1 : 1 molar ratio. X-Ray crystal structures reveal that complexes 1, 3 and 4 are mononuclear Cu(I) species, while complex 2 is a Cu(I) dimer. The copper ions are four-coordinate with geometries ranging from distorted tetrahedral to seesaw in 1, 2, and 4. Complexes 1 and 2 are very air sensitive and they display similar electrochemical properties. The coordination geometry of complex 3 is nearly linear, two-coordinate. Complex 3 is exceptionally stable with respect to oxidation in the air, and its cyclic voltammetry shows no oxidation wave in the range of 0-1.5 V. The unusual inertness of complex 3 towards oxidation is attributed to the protection from bulky triphenyl substituent of the HL(Ph3) ligand. A new geometric parameter for four-coordinate compounds, tau(4), is proposed as an improved, simple metric for quantitatively evaluating the geometry of four-coordinate complexes and compounds.     

Binuclear copper(II) oxidation products from copper(I) complexes with tridentate ligands. Magnetostructural characterization

The bis-pyridine tridentate ligands (6-R-2-pyridylmethyl)-(2-pyridylmethyl) benzylamine (RDPMA, where R = CH(3), CF(3)), (6-R-2-pyridylmethyl)-(2-pyridylethyl) benzylamine (RPMPEA, where R = CH(3), CF(3)), and the bidentate ligand di-benzyl-(6-methyl-2-pyridylmethyl)amine (BiBzMePMA) have been synthesized and their copper(I) complexes oxidized in a methanol solution to afford self-assembled bis-micro-methoxo-binuclear copper(II) complexes (1, 2, 4, 6) or hydroxo- binuclear copper(II) complexes (3). Oxidation of the nonsubstituted DPMA (R = H) in dichloromethane gives a chloride-bridged complex (5). The crystal structures for [Cu(MeDPMA)(MeO)](2)(ClO(4))(2) (1), [Cu(RPMPEA)(MeO)](2)(ClO(4))(2) (for 2, R= Me, and for 4, R = CF(3)), [Cu(BiBzMePMA)(MeO)](2)(ClO(4))(2) (6), [Cu(FDPMA)(OH)](2)(ClO(4))(2) (3), and [Cu(DPMA)(Cl)](2)(ClO(4))(2) (5) have been determined, and their variable-temperature magnetic susceptibility has been measured in the temperature range of 10-300 K. The copper coordination geometries are best described as square pyramidal, except for 6, which is square planar, because of the lack of one pyridine ring in the bidentate ligand. In 1-4 and 6, the basal plane is formed by two pyridine N atoms and two O atoms from the bridging methoxo or hydroxo groups, whereas in 5, the bridging Cl atoms occupy axial-equatorial sites. Magnetic susceptibility measurements show that the Cu atoms are strongly coupled antiferromagnetically in the bis-methoxo complexes 1, 2, 4, and 6, with -2J > 600 cm(-)(1), whereas for the hydroxo complex 3, -2J = 195 cm(-)(1) and the chloride-bridged complex 5 shows a weak ferromagnetic coupling, with 2J = 21 cm(-)(1) (2J is an indicator of the magnetic interaction between the Cu centers).     

Synthesis and structures of one- and two-electron oxidized forms of bis(acetylene)tetrairon clusters Cp'(4)Fe(4)(HCCH)(2) (Cp' = Cp,eta5-C(5)H(4)Me)

Air-oxidation of Cp'(4)Fe(4)(HCCH)(2) (Cp' = Cp (1a), C(5)H(4)Me (1b)) in an NH(4)PF(6)/CH(3)CN solution afforded the one-electron oxidized clusters [Cp'(4)Fe(4)(HCCH)(2)](PF(6)). Oxidation of 1a with excess AgBF(4) in THF afforded [1a](BF(4)), while that of 1b with excess AgBF(4) gave [1b](BF(4))(2). The X-ray crystal structure analysis of [1a](BF(4)) revealed that the monocationic cluster retains the butterfly-type Fe(4)(mu4-eta(2):eta(2):eta(1):eta(1)-HCCH)(2) framework similar to that of the neutral cluster. The average Fe-Fe bond length is shorter by 0.029 A than that in the neutral cluster. Electrochemical oxidation of 1a and 1b in 0.1 M NH(4)PF(6)/CH(3)CN solution at +0.30 and +0.25 V versus Ag/10 mM AgNO(3), respectively, afforded the two-electron oxidized clusters [1a](PF(6))(2) and [1b](PF(6))(2). The X-ray crystal structure analysis for [1b](BF(4))(2) shows that the butterfly-type cluster core is retained but shrinks more of those of neutral and monocationic clusters. The four Fe-Fe bonds in [1b](BF(4))(2) are unequivalent: one Fe-Fe bond (2.397(1) A) is apparently shorter than the others (2.439(2)-2.461(2) A).     

Diverse structures and adsorption properties of quasi-Werner-type copper(II) complexes with flexible and polar axial bonds

The quasi-Werner-type copper(II) complex, [Cu(PF(6))(2)(4-mepy)(4)] (1), in which 4-mepy is the 4-methylpyridine ligand, has flexible and polar axial bonds of Cu-PF(6). Flexibility of the Cu-PF(6) bonds induces diverse and unprecedented guest-inclusion structures, such as {[Cu(PF(6))(2)(4-mepy)(4)][Cu(PF(6))(4-mepy)(4)(acetone)]·PF(6)·4acetone} (γ-1?2.5acetone), {[Cu(PF(6))(2)(4-mepy)(4)][Cu(PF(6))(4-mepy)(4)(2-butanone)]·PF(6)·3.5(2-butanone)} (γ-1?2.25(2-butanone)), {[Cu(PF(6))(2)(4-mepy)(4)][Cu(PF(6))(4-mepy)(4)(H(2)O)]·PF(6)·4benzene} (γ-1?0.5H(2)O·2benzene), and {[Cu(PF(6))(2)(4-mepy)(4)]·2benzene} (γ-1?2benzene). Exposure of the dense form, α-1, to benzene vapor affords the benzene-inclusion complex {[Cu(PF(6))(2)(4-mepy)(4)]·2benzene} (γ-1?2benzene), all benzene guests of which are easily removed by vacuum drying, reforming guest-free, dense α-1' with smaller sized crystals than α-1. In contrast to α-1, which shows almost no CO(2) adsorption, α-1' adsorbs CO(2) gas with structural transformations, this being the first example that exhibits adsorption of gas in a dense Werner-type complex and a drastic change in adsorption properties depending on the size of the crystals.     

Topological variations of the PDP ligand and its prospects in molybdenum(0) dearomatization agents

The compounds fac-(κ(3)-PDP)Mo(CO)(3) {1; PDP = 2-[[2-(1-(pyridin-2-ylmethyl)pyrrolidin-2-yl)pyrrolidin-1-yl]methyl]pyridine}, [(cis-β-PDP)Mo(NO)(CO)]PF(6) ([cis-β-3]PF(6)), [(cis-α-PDP)Mo(NO)(CO)]PF(6) ([cis-α-3]PF(6)), [(cis-α-PDP)Mo(NO)Br]PF(6) ([4]PF(6)), [(trans-PDP)Cu](BF(4))(2)·CH(3)CN ([5](BF(4))(2)·CH(3)CN), and [(trans-PDP)Cu](OSO(2)CF(3))(2) ([5](OSO(2)CF(3))(2)) have been synthesized and structurally characterized by single-crystal X-ray diffraction. These are the first reported complexes of PDP on metal centers other than iron(II). The observed configurations indicate a broader range of accessible PDP topologies than has been reported. The {(cis-α-PDP)Mo(NO)}(+) fragment is found to be less π-basic than the dearomatizing {Tp(MeIm)Mo(NO)} fragment [Tp = hydridotris(1-pyrazolyl)borato; MeIm = 1-methylimidazole].     

Synthesis and reactions of triphenylsilanethiolato complexes of manganese(II), iron(II), cobalt(II), and nickel(II)

Reactions of Fe[N(SiMe(3))(2)](2) with 1 and 2 equiv of Ph(3)SiSH in hexane afforded dinuclear silanethiolato complexes, [Fe(N(SiMe(3))(2))(mu-SSiPh(3))](2) (1) and [Fe(SSiPh(3))(mu-SSiPh(3))](2) (2), respectively. Various Lewis bases were readily added to 2, generating mononuclear adducts, Fe(SSiPh(3))(2)(L)(2) [L = CH(3)CN (3a), 4-(t)BuC(5)H(4)N (3b), PEt(3) (3c), (LL) = tmeda (3d)]. From the analogous reactions of M[N(SiMe(3))(2)](2) (M = Mn, Co) and [Ni(NPh(2))(2)](2) with Ph(3)SiSH in the presence of TMEDA, the corresponding silanethiolato complexes, M(SSiPh(3))(2)(tmeda) [M = Mn (4), Co (5), Ni (6)], were isolated. Treatment of 3a with (PPh(4))(2)[MoS(4)] or (NEt(4))(2)[FeCl(4)] resulted in formation of a linear trinuclear Fe-Mo-Fe cluster (PPh(4))(2)[MoS(4)(Fe(SSiPh(3))(2))(2)] (7) or a dinuclear complex (NEt(4))(2)[Fe(2)(SSiPh(3))(2)Cl(4)] (8). On the other hand, the reaction of 3a with [Cu(CH(3)CN)(4)](PF(6)) gave a cyclic tetranuclear copper cluster Cu(4)(SSiPh(3))(4) (9), where silanethiolato ligands were transferred from iron to copper. Silicon-sulfur bond cleavage was found to occur when the cobalt complex 5 was treated with (NBu(4))F in THF, and a cobalt-sulfido cluster Co(6)(mu(3)-S)(8)(PPh(3))(6) (10) was isolated upon addition of PPh(3) to the reaction system. The silanethiolato complexes reported here are expected to serve as convenient precursors for sulfido cluster synthesis.     

Cubane-type heterometallic sulfido clusters: incorporation of two metal fragments into a dinuclear ReS(mu-S)2ReS core affording bimetallic M2Re2(mu 3-S)4 clusters (M = Ru,Pt, Cu) or trimetallic MM'Re2(mu 3-S)4 clusters via incomplete cubane-type MRe2(mu 3-S)(mu 2-S)3 intermediates (M = Ru,Rh, Ir; M' = Mo,W, Pd,Ru, Rh)

Reactions of a dirhenium tetra(sulfido) complex [PPh(4)](2)[ReS(L)(mu-S)(2)ReS(L)] (L = S(2)C(2)(SiMe(3))(2)) with a series of group 8-11 metal complexes in MeCN at room temperature afforded either the cubane-type clusters [M(2)(ReL)(2)(mu(3)-S)(4)] (M = CpRu (2), PtMe(3), Cu(PPh(3)) (4); Cp = eta(5)-C(5)Me(5)) or the incomplete cubane-type clusters [M(ReL)(2)(mu(3)-S)(mu(2)-S)(3)] (M = (eta(6)-C(6)HMe(5))Ru (5), CpRh (6), CpIr (7)), depending on the nature of the metal complexes added. It has also been disclosed that the latter incomplete cubane-type clusters can serve as the good precursors to the trimetallic cubane-type clusters still poorly precedented. Thus, treatment of 5-7 with a range of metal complexes in THF at room temperature resulted in the formation of novel trimetallic cubane-type clusters, including the neutral clusters [[(eta(6)-C(6)HMe(5))Ru][W(CO)(3)](ReL)(2)(mu(3)-S)(4)], [(CpM)[W(CO)(3)](ReL)(2)(mu(3)-S)(4)] (M = Rh, Ir), [(Cp*Ir)[Mo(CO)(3)](ReL)(2)(mu(3)-S)(4)], [[(eta(6)-C(6)HMe(5))Ru][Pd(PPh(3))](ReL)(2)(mu(3)-S)(4)], and [(Cp*Ir)[Pd(PPh(3))](ReL)(2)(mu(3)-S)(4)] (13) along with the cationic clusters [(Cp*Ir)(CpRu)(ReL)(2)(mu(3)-S)(4)][PF(6)] (14) and [(Cp*Ir)[Rh(cod)](ReL)(2)(mu(3)-S)(4)][PF(6)] (cod = 1,5-cyclooctadiene). The X-ray analyses have been carried out for 2, 4, 7, 13, and the SbF(6) analogue of 14 (14') to confirm their bimetallic cubane-type, bimetallic incomplete cubane-type, or trimetallic cubane-type structures. Fluxional behavior of the incomplete cubane-type and trimetallic cubane-type clusters in solutions has been demonstrated by the variable-temperature (1)H NMR studies, which is ascribable to both the metal-metal bond migration in the cluster cores and the pseudorotation of the dithiolene ligand bonded to the square pyramidal Re centers, where the temperatures at which these processes proceed have been found to depend upon the nature of the metal centers included in the cluster cores.     

Assembly of bicyclic or monocyclic clusters from [(η5-C5Me5)2Mo2(μ3-S)4(CuMeCN)2]2+ with tetraphosphine or N,P mixed ligands: syntheses, structures and enhanced third-order NLO performances

Reactions of the preformed cluster [(η(5)-C(5)Me(5))(2)Mo(2)(μ(3)-S)(4)Cu(2)(MeCN)(2)](ClO(4))(2) (1) with two tetraphosphine ligands, 1,4-N,N,N',N'-tetra(diphenylphosphanylmethyl)benzene diamine (dpppda) and N,N,N',N'-tetra(diphenylphosphanylmethyl)ethylene diamine (dppeda), produced two bicyclic clusters {[(η(5)-C(5)Me(5))(2)Mo(2)(μ(3)-S)(4)Cu(2)](2)(L)}(ClO(4))(4) (3: L = dpppda; 4: L = dppeda). Analogous reactions of 1 or [(η(5)-C(5)Me(5))(2)Mo(2)(μ(3)-S)(4)Cu(2)(MeCN)(2)](PF(6))(2) (2) with two N,P mixed ligands, N,N-bi(diphenylphosphanylmethyl)-2-aminopyridine (bdppmapy) and N-diphenylphosphanylmethyl-4-aminopyridine (dppmapy), afforded two monocyclic clusters {[(η(5)-C(5)Me(5))(2)Mo(2)(μ(3)-S)(4)Cu(2)](2)(L)(2)}X(4) (5: L = bdppmapy, X = ClO(4); 6: L = dppmapy, X = PF(6)). Compounds 3-6 were fully characterized by elemental analysis, IR spectra, UV-vis spectra, (1)H and (31)P{(1)H} NMR spectra, ESI-MS and single-crystal X-ray crystallography. In the tetracations of 3-6, two cubane-like [Mo(2)(μ(3)-S)(4)Cu(2)] cores are linked either by one dpppda or dppeda bridge to form a bicyclic structure or by a pair of bdppmapy or dppmapy bridges to afford a monocyclic structure. The third-order nonlinear optical (NLO) properties of 1 and 3-6 in MeCN were also investigated by femtosecond degenerate four-wave mixing (DFWM) technique with a 50 fs pulse width at 800 nm. Compounds 3-6 exhibited enhanced third-order NLO performances relative to that of 1.