Reduced band gap dithieno[3,2-b:2',3'-d]pyrroles: new n-type organic materials via unexpected reactivity

Direct addition of tetracyanoethylene to N-(p-hexylphenyl)dithieno[3,2-b:2',3'-d]pyrrole yields not only the aromatic mono- and bis-tricyanovinyl-substituted products but also a quinoidal product with dicyanomethylene groups. The analogous reaction with dithieno[3,2-b:2',3'-d]thiophene yields exclusively the aromatic mono-tricyanovinyl product. The aromatic and quinoidal products possess red-shifted absorptions, increased electron affinities, and favorable pi-stacking motifs in comparison to the unsubstituted oligomers.     

Improved synthesis of dithieno[3,2-b:2',3'-d]thiophene (DTT) and derivatives for cross coupling

An improved synthesis of dithieno[3,2-b:2',3'-d]thiophene (DTT) and its 2,6- and 3,5-dibromo derivatives has been devised; Stille cross coupling of 2,5-(bistrimethylstannyl)-DTT afforded the oligomer 12.     

Highly fluorescent oligothiophenes through the incorporation of central dithieno[3,2-b:2',3'-d]pyrrole units

[structures: see text] Dithieno[3,2-b:2',3'-d]pyrrole-based terthiophene (2a-c) and quaterthiophene (3a-c) analogues have been prepared from dithieno[3,2-b:2',3'-d]pyrrole (1) via Stille coupling utilizing a one-pot method. In comparison to the parent oligothiophenes (T(n), where n = 2-4), the resulting dithieno[3,2-b:2',3'-d]pyrrole-based systems exhibit enhanced fluorescence efficiencies in solution (up to 53%). These new oligomeric systems also allow the incorporation of solubilizing side chains without the negative steric interactions that typically reduce backbone planarity.     

Luminescent digold ethynyl thienothiophene and dithienothiophene complexes; their synthesis and structural characterisation

A series of protected and terminal dialkynes with extended pi-conjugation through the fused oligothienyl linker unit in the backbone, 2,5-bis(trimethylsilylethynyl)thieno[3,2-b]thiophene 1a, 5,5'-bis(trimethylsilylethynyl)dithieno[3,2-b:2',3'-d]thiophene 1b, 2,5-bis(ethynyl)thieno[3,2-b]thiophene 2a, 5,5'-bis(ethynyl)dithieno[3,2-b:2',3'-d]thiophene 2b, has been synthesized and characterised. The digold alkynyl complexes [(Ph3P)Au(C[triple bond]C)(C6H2S2)(C[triple bond]C)Au(PPh3)] 3a and [(Ph3P)Au(C[triple bond]C)(C8H2S3)(C[triple bond]C)Au(PPh3)] 3b have then been prepared by the reaction of two equivalents of Ph3PAuCl and a methanolic KOH solution of 1a and 1b, respectively. The complexes have been characterised spectroscopically. The crystal structures show that the gold centres adopt a linear two-coordinate geometry appropriate for Au(i) complexes. Within the crystals adjacent molecules are linked by Au...S intermolecular interactions in the range 3.48-3.89 A, but there are no short Au...Au contacts. The absence of Au...Au interactions in solution is confirmed by UV/visible absorption and emission spectroscopy, the spectra being dominated by ligand-centred pi-pi* interactions.     

Linear fused dithieno[2,3-b:3'2'-d]thiophene diimides

Linear fused dithieno[2,3-b:3'2'-d]thiophene diimides (DTTDIs, 1-4) were synthesized. Physicochemical investigations suggested that these diimides might be used as potential n-channel organic semiconductors. Single-crystal analysis of N-propyl DTTDI (1) revealed that molecules adopt a layered herringbone packing motif.     

Solution and solid-state properties of highly fluorescent dithieno[3,2-b:2',3'-d]pyrrole-based oligothiophenes

Dithieno[3,2-b:2',3'-d]pyrrole-based terthiophene and quaterthiophene analogues have been prepared from N-functionalized dithieno[3,2-b:2',3'-d]pyrroles (DTPs) via Stille coupling. In order to thoroughly study the structure-function property relationships within these DTP-based oligothiophenes, an oligomer series was prepared that allows for the investigation of a number of structural effects including chain length, thiophene functionalization, and pyrrole N-functionalization. As pyrrole N-functionalization allows the incorporation of solubilizing side chains without the unwanted steric interactions that typically reduce backbone planarity, the effect of the bulk of these side chains on the optical properties in both solution and the solid state has been carefully investigated. The DTP-based quaterthiophene, N-tert-butyl-2,6-bis(2'-thienyl)dithieno[3,2-b:2',3'-d]pyrrole was characterized via X-ray crystallography and was found to crystallize in the monoclinic space group P2(1)/c with a = 17.489(4) ?, b = 7.8855(16) ?, c = 14.540(3) ?, β = 108.37(3)°, and Z = 4. The effect of side chains on the solid-state packing of the DTP-based quaterthiophenes was further investigated through X-ray diffraction of solution processed thin films. In comparison to the parent oligothiophenes, the resulting DTP-based systems exhibit enhanced fluorescence efficiencies in solution (up to 66%) and measurable solid-state emission from thin films.     

Synthesis of dithieno[2,3-b:4',3'-d]siloles and their selective bromination

The efficient synthesis of novel unsymmetrical dithienosiloles, 7,7-dimethyl-4,6-di(trimethylsilyl)-dithieno[2,3-b:4',3'-d]silole (1) and 7,7-dimethyl-2,4,6-tri(trimethylsilyl)-dithieno[2,3-b:4',3'-d]silole (2) has been developed by intramolecular silole formation with 4,4'-dibromo-2,2',5,5'-tetrakis(trimethylsilyl)-[3,3']bithienyl (3) as the starting material in the presence of t-BuLi. Upon treatment with N-bromosuccinimide (NBS) under controlled conditions, dithieno[2,3-b:4',3'-d]silole was selectively brominated to produce mono-, di-, and tribrominated dithieno[2,3-b:4',3'-d]siloles in good yields. The crystal structures of the title compounds are described.     

Photochromic oligothienoacene derivatives with photo-switchable luminescence properties and computational studies

Photochromic thieno[3,2-b]thiophenes and dithieno[3,2-b:2',3'-d]thiophene with photo-switchable luminescence properties have been synthesized using a Suzuki cross-coupling reaction; their electronic structures, and photochromic and luminescence behaviour have also been studied.     

General synthesis of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) derivatives

A new straightforward synthesis of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) derivatives from readily available 2-methoxynaphthalenes is described. Thus, newly developed derivatives of DNTT showed very high field effect mobility in the vapor-processed field-effect transistors up to 8 cm(2) V(-1) s(-1).     

From model compounds to extended pi-conjugated systems: synthesis and properties of dithieno[3,2-b:2',3'-d]phospholes

To explore their suitability for applications in molecular optoelectronics and as sensory materials, novel dithieno[3,2-b:2',3'-d]phospholes have been synthesized and their reactivity and properties investigated. An efficient two-step synthesis allowed for a modular assembly of differently functionalized compounds. The dithieno[3,2-b:2',3'-d]phosphole system exhibits extraordinary optoelectronic properties with respect to wavelength, intensity, and tunability. Owing to the nucleophilic nature of the central phosphorus atom, its significant electronic influence on the conjugated pi system can be altered selectively by chemically facile modifications such as oxidation or complexation with Lewis acids or transition metals. All the dithienophosphole species presented show very strong blue photoluminescence with excellent quantum yield efficiencies supporting their potential utility as blue-light emitting components in organic light emitting diodes (OLEDs). Furthermore, depending on the electronic nature of the phosphorus center, the materials exhibit distinctive optoelectronic properties suggesting that the dithieno[3,2-b:2',3'-d]phosphole system may be useful as sensory material. Theoretical calculations, including time-dependent DFT methods, revealed the excellent predictability of the structures and optoelectronic properties of the functionalized dithienophospholes allowing the design of future dithieno[3,2-b:2',3'-d]phosphole-based materials to be "stream-lined". By using tin-functionalized dithienophosphole monomers, a strategy, which involves Stille coupling, towards extended pi-conjugated materials with significantly redshifted optoelectronic properties is also presented.     

A simple and efficient route to N-functionalized dithieno[3,2-b:2',3'-d]pyrroles: fused-ring building blocks for new conjugated polymeric systems

A general synthetic route has been developed for the simple and efficient preparation of N-functionalized dithieno[3,2-b:2',3'-d]pyrroles. These synthetic methods utilize N-functionalized N-(3'-thienyl)-3-aminothiophenes produced from the Pd-catalyzed amination of 3-bromothiophene with primary amines, followed by a one-pot bromination/cyclization process. This combination allows the convenient preparation of a variety of N-functionalized dithieno[3,2-b:2',3'-d]pyrroles (where substituent = hexyl, octyl, decyl, tert-butyl, and p-hexylphenyl) in good yield (65-82%). Characterization of the structure and reactivity of this class of compounds is also described, including electrochemical and photophysical data for all compounds and X-ray structural data for the octyl-, tert-butyl-, and p-hexylphenyl-functionalized compounds.     

Synthesis and structure of alkyl-substituted fused thiophenes containing up to seven rings

We have established a series of synthetic methods to synthesize alkyl-substituted fused thiophenes with degrees of fusion from two to seven rings. These fused thiophene ring compounds have very good solubility in common organic solvents, making possible the solution processing of these compounds for electronic applications. The UV absorption of these fused thiophenes is blue-shifted when compared with their hydrocarbon counterparts. The larger band gaps result in much better stability. Single-crystal X-ray results for 3,6-didecanyldithieno[2,3-d:2',3'-d']thieno[3,2-b:4,5-b']dithiophene (FT5) and 3,7-didecanylthieno[3,2-b]thieno[2',3':4,5]thieno[2,3-d]thiophene (FT4) demonstrate that both compounds form pi-stacking structures instead of a herringbone-type of packing motif. This more favorable pi-stacked structure may lead to better material electronic properties such as mobility in devices fabricated with these compounds.     

Molecular tuning in highly fluorescent dithieno[3,2-b:2',3'-d]pyrrole-based oligomers: effects of N-functionalization and terminal aryl unit

A series of eight conjugated oligomers consisting of central dithieno[3,2-b:2',3'-d]pyrroles (DTPs) end-capped with either thienyl or phenyl groups have been prepared from N-alkyl-, N-aryl-, and N-acyl-dithieno[3,2-b:2',3'-d]pyrroles via Stille and Suzuki cross-coupling. The DTP-based quaterthiophene, N-phenyl-2,6-bis(2-thienyl)dithieno-[3,2-b:2',3'-d]pyrrole was characterized via X-ray crystallography and was found to crystallize in the orthorhombic space group Pna2(1) with a = 10.8666(3) ?, b = 22.8858(6) ?, c = 7.4246(2) ?, and Z = 4. The full oligomeric series was thoroughly investigated via photophysical, electrochemical, and DFT calculations in order to correlate the cumulative effects of both aryl end-groups and N-functionalization on the resulting optical and electronic properties. Through such molecular tuning, it was found to be possible to modulate the HOMO energy by as much as 0.32 V and to generate highly fluorescent oligomers with solution fluorescence efficiencies as high as 92%.     

Cationic dithieno[3,2-b:2',3'-d]phospholes: a new building block for luminescent, conjugated polyelectrolytes

Cationic dithieno[3,2-b:2',3'-d]phospholes are accessible very efficiently by methylation of the phosphorus center. Further functionalization with bromo substituents in 2,6-positions affords a polymerizable monomer that can be copolymerized with a difunctionalized fluorene in a Suzuki-Miyaura-type cross-coupling protocol. The monomers as well as the resulting conjugated polyelectrolyte based on the phospholium units show very intriguing photoluminescence properties, even in the solid state. [structure: see text]     

Condensed heteroaromatic systems including a thiophene ring. XXXIII. Catalytic liquid-phase oxidation of 3-methyl-substituted thieno[2,3-b]thiophenes and thieno[3,2-b]thiophenes

It is shown that the catalytic liquid-phase oxidation of 3-methylthieno[2,3-b]-thiophene and 3-methylthieno[3,2-b]thiophene in acetic acid in the presence of cobalt acetate and sodium bromide at 90–110° gives thieno[2,3-b]thiophene-3-carboxylic acid and thieno[3,2-b]-3-formylthiophene, respectively.See [1] for communication XXXII.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 492–498, April, 1975.     

New reaction of benzo[b]thieno[3,2-b]benzo[b]thiophene disulfone

A new reaction of benzo[b]thieno[3,2-b]benzo[b]thiophene disulfone with amines that takes place with opening of one of the thiophene rings and nucleophilic substitution in the heteroaromatic ring at the site of cleavage of the S-C bond was observed. The molecular structures of the products of amination of the disulfone were determined by x-ray diffraction analysis. Hydrolysis and dehydration of the amination products gave derivatives of a new heterocyclic system, viz., benzo[b]-thieno[3,2-e]benzo[c]-1,2-oxathiin. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 320–323, March, 1980.     

Highly sensitive sensory materials for fluoride ions based on the dithieno[3,2-b:2',3'-d]phosphole system

[structure: see text]. The newly developed functionalization of an unsubstituted dithieno[3,2-b:2',3'-d]phosphole at the 5,5'-positions gives access to bis(pinacoleboryl) species that can be utilized as sensory materials for fluoride ions. The fluoride-triggered response of the air- and moisture-stable boryl-functionalized dithienophosphole oxide manifests itself in the generation of a new fluorescence emission that can be detected at very low analyte concentrations (ppm) or even with the naked eye upon irradiation with UV light (366 nm).     

Benzo[3,4]cyclobuta[1,2-b]thiophene

Tye synthesis of thieno[3,2-c]cinnoline is described; vapour phase thermolysis of this compound gives benzo[3,4]cyclobuta[1,2-b]thiophene.     

Synthesis of 2-methylthie no [3,2-b]thieno-[2,3-d]thiazole

A new heterocyclic base — 2-methylthieno[3,2-b]thieno[2,3-d]thiazole — was synthesized by heating 2-acetamido-3-hydroxythieno[3,2-b]thiophene with phosphorus pentasulfide.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1039–1041, August, 1976.     

Bis[bis-(4-alkoxyphenyl)amino] derivatives of dithienylethene, bithiophene, dithienothiophene and dithienopyrrole: palladium-catalysed synthesis and highly delocalised radical cations

Five diamines with thiophene-based bridges--(E)-1,2-bis{5-[bis(4-butoxyphenyl)amino]-2-thienyl}ethylene (1), 5,5'-bis[bis(4-methoxyphenyl)amino]-2,2'-bithiophene (2), 2,6-bis[bis(4-butoxyphenyl)amino]dithieno[3,2-b:2',3'-d]thiophene (3), N-(4-tert-butylphenyl)-2,6-bis[bis(4-methoxyphenyl)amino]dithieno[3,2-b:2',3'-d]pyrrole (4 a) and N-tert-butyl-2,6-bis[bis(4-methoxyphenyl)amino]dithieno[3,2-b:2',3'-d]pyrrole (4 b)--have been synthesised. The syntheses make use of the palladium(0)-catalysed coupling of brominated thiophene species with diarylamines, in some cases accelerated by microwave irradiation. The molecules all undergo facile oxidation, 4 b being the most readily oxidised at about -0.4 V versus ferrocenium/ferrocene, and solutions of the corresponding radical cations were generated by addition of tris(4-bromophenyl)aminium hexachloroantimonate to the neutral species. The near-IR spectra of the radical cations show absorptions characteristic of symmetrical delocalised species (that is, class III mixed-valence species); analysis of these absorptions in the framework of Hush theory indicates strong coupling between the two amine redox centres, stronger than that observed in species with phenylene-based bridging groups of comparable length. The strong coupling can be attributed to high-lying orbitals of the thiophene-based bridging units. ESR spectroscopy indicates that the coupling constant to the amino nitrogen atoms is somewhat reduced relative to that in a stilbene-bridged analogue. The neutral species and the corresponding radical cations have been studied with the aid of density functional theory and time-dependent density functional theory. The DFT-calculated ESR parameters are in good agreement with experiment, while calculated spin densities suggest increased bridge character to the oxidation in these species relative to that in comparable species with phenylene-based bridges.