Thermochemistry of the solid complex Gd(Et<Subscript>2</Subscript>dtc)<Subscript>3</Subscript>(phen)

Summary A ternary solid complex Gd(Et₂dtc)₃(phen) has been obtained from reactions of sodium diethyldithiocarbamate (NaEt₂dtc), 1,10-phenanthroline (phen) and hydrated gadolinium chloride in absolute ethanol. The title complex was described by chemical and elemental analyses, TG-DTG and IR spectrum. The enthalpy change of liquid-phase reaction of formation of the complex, Δ_rH^Θ_m(l), was determined as (-11.628±0.0204) kJ mol^-1 at 298.15 K by a RD-496 III heat conduction microcalorimeter. The enthalpy change of the solid-phase reaction of formation of the complex, Δ_rH^Θ_m(s), was calculated as (145.306±0.519) kJ mol^-1 on the basis of a designed thermochemical cycle. The thermodynamics of reaction of formation of the complex was investigated by changing the temperature of liquid-phase reaction. Fundamental parameters, the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A), the reaction order (n), the activation enthalpy (Δ_rH^Θ_≠), the activation entropy (Δ_rS^Θ_≠), the activation free energy (Δ_rG^Θ_≠) and the enthalpy (Δ_rH^Θ_≠), were obtained by combination of the thermodynamic and kinetic equations for the reaction with the data of thermokinetic experiments. The constant-volume combustion energy of the complex, Δ_cU, was determined as (-18673.71±8.15) kJ mol^-1 by a RBC-II rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH^Θ_m, and standard enthalpy of formation, Δ_fH^Θ_m, were calculated to be (-18692.92±8.15) kJ mol^-1 and (-51.28±9.17) kJ mol^-1, respectively.     

Rate and Equilibrium Constants of Benzoyl Group Transfer between Pyridine N-Oxides

Kinetic characteristics of 19 transfer reactions of benzoyl group from N-benzoyloxypyridinium salts to pyridine N-oxides and 4-dimethylaminopyridine were studied in acetonitrile by the stopped-flow method. The rate of an identical reaction for 4-methoxypyridine was measured by dynamic NMR spectroscopy. For 5 other identical reactions the rates were estimated from Bronsted correlations. Equilibrium constants were estimated with the use of UV spectrophotometry (6), IR spectroscopy (2), from kinetic data (K _ij = k _ij /k _ji ) (2), and in one case as logK _i−j = logK _i−x − logK _j−x . The second order rate constants (k _ij ) varied in the range 10²–10⁵ l mol⁻¹ s⁻¹, the equilibrium constants (K _ij ) in the range 10²–10⁻²; the activation parameters (ΔH ^≠) were within 15–50 kJ mol⁻¹, (−ΔS ^≠) −20–110 J mol⁻¹ K⁻¹. The reactions under study occur in a single stage following the concerted S_N2 mechanism through an early associative transition state. The benzoyl groups exchange rate and equilibrium are well described by simplified Marcus equation (omitting the quadratic term).__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 5, 2005, pp. 788–792.Original Russian Text Copyright © 2005 by Rybachenko, Schroeder, Chotii, Lenska, Red’ko, Kovalenko.     

Kinetics of the R + HBr RH + Br (CH3CHBr, CHBr2 or CDBr2) equilibrium. Thermochemistry of the CH3CHBr and CHBr2 radicals

The kinetics of the reaction of the CH₃CHBr, CHBr₂ or CDBr₂ radicals, R, with HBr have been investigated in a temperature-controlled tubular reactor coupled to a photoionization mass spectrometer. The CH₃CHBr (or CHBr₂ or CDBr₂) radical was produced homogeneously in the reactor by a pulsed 248 nm exciplex laser photolysis of CH₃CHBr₂ (or CHBr₃ or CDBr₃). The decay of R was monitored as a function of HBr concentration under pseudo-first-order conditions to determine the rate constants as a function of temperature. The reactions were studied separately from 253 to 344 K (CH₃CHBr + HBr) and from 288 to 477 K (CHBr₂ + HBr) and in these temperature ranges the rate constants determined were fitted to an Arrhenius expression (error limits stated are 1σ + Student’s t values, units in cm³ molecule⁻¹ s⁻¹, no error limits for the third reaction): k(CH₃CHBr + HBr) = (1.7 ± 1.2) × 10⁻¹³ exp[+ (5.1 ± 1.9) kJ mol⁻¹/RT], k(CHBr₂ + HBr) = (2.5 ± 1.2) × 10⁻¹³ exp[−(4.04 ± 1.14) kJ mol⁻¹/RT] and k(CDBr₂ + HBr) = 1.6 × 10⁻¹³ exp(−2.1 kJ mol⁻¹/RT). The energy barriers of the reverse reactions were taken from the literature. The enthalpy of formation values of the CH₃CHBr and CHBr₂ radicals and an experimental entropy value at 298 K for the CH₃CHBr radical were obtained using a second-law method. The result for the entropy value for the CH₃CHBr radical is 305 ± 9 J K⁻¹ mol⁻¹. The results for the enthalpy of formation values at 298 K are (in kJ mol⁻¹): 133.4 ± 3.4 (CH₃CHBr) and 199.1 ± 2.7 (CHBr₂), and for α-C–H bond dissociation energies of analogous compounds are (in kJ mol⁻¹): 415.0 ± 2.7 (CH₃CH₂Br) and 412.6 ± 2.7 (CH₂Br₂), respectively.     

Dinitrogen and carbon monoxide hydrogen bonding in protonic zeolites: Studies from variable-temperature infrared spectroscopy

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-Y results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted-acid groups. This hydrogen-bonding interaction leads to activation, in the infrared, of the fundamental N–N stretching mode, which appears at 2334 cm⁻¹. From infrared spectra taken over a temperature range, the standard enthalpy of formation of the OH···N₂ complex was found to be ΔH⁰ = −15.7(±1) kJ mol⁻¹. Similarly, variable-temperature infrared spectroscopy was used to determine the standard enthalpy change involved in formation of H-bonded CO complexes for CO adsorbed on the zeolites H-ZSM-5 and H-FER; the corresponding values of ΔH⁰ were found to be −29.4(±1) and −28.4(±1) kJ mol⁻¹, respectively. The whole set of results was analysed in the context of other relevant data available in the literature.     

A Kinetic and Mechanistic Study on Substitution of Aqua Ligands from <Emphasis Type="Italic">cis</Emphasis>-diaqua-<Emphasis Type="Italic">bis</Emphasis>-(bipyridyl)-ruthenium(II) Complex by Thiosemicarbazide in Aqueous Medium

The kinetics of the interaction of thiosemicarbazide with cis-[Ru(bipy)₂(H₂O)₂]²⁺ (bipy = α α′-bipyridyl) have been studied spectrophotometrically as a function of [Ru(bipy)₂(H₂O)₂²⁺], [bipyridyl] and temperature, at a particular pH (4.8), where the substrate complex exists predominantly as the diaqua species and thiosemicarbazide as the neutral ligand. The reaction proceeds via an outer sphere association complex formation, followed by two slow consecutive steps. The first is the conversion of the aforementioned complex into the inner sphere complex, and the second step involves the entrance of another thiosemicarbazide molecule in the coordination zone of Ru(II) whereby, in each step, an aqua ligand is replaced. The association equilibrium constant (K_E) for the outer sphere complex formation has been evaluated together with rate constants for the two subsequent steps. Activation parameters have been calculated for both steps using the Eyring equation (ΔH₁^# = 25.37±1.6 kJ mol⁻¹, ΔS₁^# = −215.48 ± 4.5 J K⁻¹ mol⁻¹, ΔH₂^# = 24.24 ± 1.1 kJ mol⁻¹, ΔS₂^# = −207.14 ± 3.0 J K⁻¹ mol⁻¹). The low enthalpy of activation and large negative value of entropy of activation indicate an associative mode of activation for both aqua ligand substitution processes. From the temperature dependence of K_E, the thermodynamic parameters calculated are: ΔH⁰ = 10.75±0.54 kJ mol⁻¹ and ΔS⁰ = 84.67 ± 1.75 J K⁻¹ mol⁻¹, which give a negative ΔG⁰ value at all temperatures studied, supporting the spontaneous formation of an outersphere association complex prior to the first step.     

Equilibrium, kinetics and thermodynamic aspects of Promethazine hydrochloride sorption by iron rich smectite

Equilibrium, kinetics and thermodynamic aspects of sorption of Promethazine hydrochloride (PHCl) onto iron rich smectite (IRS) from aqueous solution were investigated. The effect of pH on sorption of PHCl onto IRS was also found out. Experimental data were evaluated by using Langmuir, Freundlich and Dubinin–Raduschkevich (DR) isotherm equations. Freundlich and DR equations provided better compatibility than Langmuir equation. Besides, it was determined that the maximum sorption of PHCl takes place at about pH 5. From kinetic studies, it was obtained that sorption kinetics follow pseudo-second-order kinetic model for PHCl sorption onto IRS. When thermodynamic studies are concerned, the values of activation energy (E_a), ΔG°, ΔH° and ΔS° were obtained. ΔG° values are in the range of −8.84 and −9.45 kJ mol⁻¹ indicating spontaneous nature of physisorption. The negative value of the ΔH° (−3.20 kJ mol⁻¹) indicates exothermic nature of adsorption. FTIR analysis and SEM observations of IRS and PHCl adsorbed IRS were also carried out. Sorption experiments indicate that IRS may be used effectively for the adsorption of PHCl.     

Structure determination from powder diffraction data and thermal behaviour of layered lead nitrate oxalate hydrate, Pb2(NO3)2(C2O4).2H2O

The mixed lead nitrate oxalate, Pb₂(NO₃)₂(C₂O₄).2H₂O, has been obtained in a polycrystalline form in the course of a study on precursors of nanocrystalline PZT-type oxides. Its crystal structure has been solved from powder diffraction data collected using a monochromatic radiation from a conventional X-ray source. The symmetry is monoclinic, space group P2₁/c (No. 14), the cell dimensions are a=10.623(2) Å, b=7.9559(9) Å, c=6.1932(5) Å, β=104.49(1)° and Z=4. The structure consists of a stacking of complex double sheets parallel to (1 0 0), forming layers held together by hydrogen bonds. The sheets result from the condensation of PbO₁₀ polyhedra, in which the oxalate and nitrate groups, as well as water molecules, play a major role. The structure is discussed in terms of Pb---O distances, polyhedra shape and lead coordination, with emphasis on the dimensional polymerisation role of water molecules. The thermal behaviour of this layered compound is carefully described from temperature-dependent powder diffraction and thermogravimetric measurements. The enthalpy, Δ_rH=232(3) kJ mol⁻¹, and entropy, Δ_rS=532(8) J K⁻¹ mol⁻¹, of the dehydration reaction have been determined. The high value of Δ_rH demonstrates that the water molecules are strongly bonded in the structure. The complex decomposition proceeds through the crystallisation and decomposition of Pb(NO₃)₂(C₂O₄) into Pb(NO₃)₂ and PbC₂O₄, and, finally, various lead oxides.     

The standard partial molar entropy of the aqueous tetra-n-butylammonium cation

The standard partial molar entropy of the aqueous tetrabutylammonium cation, not known previously, has now been obtained, based on the molar entropy of two of its crystalline salts, the iodide and the tetraphenylborate, recently determined experimentally for this purpose. The calculation required also published molar enthalpies of solution and solubilities of these two salts as well as of the perchlorate. The choice of the anions depended mainly on the limited solubilities of the examined salts in water, facilitating the estimation of the relevant activity coefficients. The result is S^∞(Bu₄N⁺, aq) = (380 ± 20) J · K⁻¹ · mol⁻¹ at T = 298.15 K, on the mol · dm⁻³ scale and based on S^∞(H⁺, aq) = (−22.2 ± 1.2) J · K⁻¹ · mol⁻¹ (yielding the ‘absolute’ value). The molar entropy of this cation in the ideal gas standard state, S(Bu₄N⁺, g) = (798 ± 8) J · K⁻¹ · mol⁻¹ then yielded the molar entropy of hydration Δ_hydS^∞ (Bu₄N⁺) = (−418 ± 23) J · K⁻¹ · mol⁻¹.     

Vapor pressure, kinetics and enthalpy of sublimation of bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper(II)

The kinetics of sublimation of bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper(II), [Cu(tmhd)₂] was studied by non-isothermal and isothermal thermogravimetric (TG) methods. The non-isothermal sublimation activation energy values determined following the procedures of Friedman, Kissinger, and Flynn–Wall methods yielded 93 ± 5, 67 ± 2, and 73 ± 4 kJ mol⁻¹, respectively and the isothermal sublimation activation energy was found to be 97 ± 3 kJ mol⁻¹ over the temperature range of 375–435 K. The dynamic TG run proved the complex to be completely volatile and the equilibrium vapor pressure (p_e)_T of the complex over the temperature range of 375–435 K determined by a TG-based transpiration technique, yielded a value of 96 ± 2 kJ mol⁻¹ for its standard enthalpy of sublimation (Δ_subH°).     

Reexamination of the C2H4F potential surface. the status of the classical 2-fluoroethyl cation: a local minimum or transition structure?

According to ab initio molecular orbital calculations carried out with full geometry optimization at the MP2/6–31G^** level, the classical 2-fluoroethyl cation, FCH₂CH₂⁺, is a transition structure for H-scrambling in CH₃CHF⁺. Single point MP4/6–31G^** calculations at the optimized geometries predict the cyclic ethylene fluoronium ion to lie 24.2 kcal mol⁻¹ above CH₃CHF⁺ and 5.4 kcal mol⁻¹ below the 2-fluoroethyl cation. ΔG‡ for ring opening of the cyclic fluoronium ion at -60° is estimated to be ca 15 kcal mol⁻¹. This barrier is largely attributable to the powerful negative fluorine hyperconjugation in the transition state as described by Hoffmann and coworkers. When electron correlation effects are ignored a qualitatively different potential surface is obtained on which the 2-fluoroethyl cation is calculated to be a local minimum separated from the stable 1-fluoroethyl cation by an H-bridged transition state.     

Molecular Structure and Conformational Preferences of Trimethyl Phosphorotrithioite,P(SMe)<Subscript>3</Subscript>, Evaluated by Gas-Phase Electron Diffraction and Quantum Chemical Calculations

Free P(SMe)₃ molecule was studied by gas electron diffraction (GED) and by B3PW91/6-311+G* (DFT) and MP2/6-31+G* calculations. Each conformer is characterized by three dihedral angles τ(CSPlp), where lp denotes the direction of the lone electron lone pair on the P atom. DFT calculations indicate that the most stable conformer is an anti,gauche+,gauche- (ag+g-) conformer of C _s symmetry; the next are the ag+g+ (ΔE = 2.5 kJ mol⁻¹), g+g+g+ (ΔE = 5.2 kJ mol⁻¹), and aa+g+ (Δ E = 12.5 kJ mol⁻¹) conformers. The MP2 calculations give the similar order, with the relative energies of 0.3, 4.3, and 10.6 kJ mol⁻¹, respectively. The experimental GED data agree well with the presence of only two conformers: χ(ag+g+) = 80(20)% and χ(ag+g-) = 20(10)%.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 5, 2005, pp. 742–750.Original Russian Text Copyright © 2005 by Belyakov, Khramov, Baskakova, Naumov.     

Study on the interaction between antibacterial drug and bovine serum albumin: A spectroscopic approach

The binding of sulfamethoxazole (SMZ) to bovine serum albumin (BSA) was investigated by spectroscopic methods viz., fluorescence, FT-IR and UV–vis absorption techniques. The binding parameters have been evaluated by fluorescence quenching method. The thermodynamic parameters, ΔH°, ΔS°and ΔG° were observed to be −58.0 kJ mol⁻¹, −111 J K⁻¹ mol⁻¹ and −24 kJ mol⁻¹, respectively. These indicated that the hydrogen bonding and weak van der Waals forces played a major role in the interaction. Based on the Forster's theory of non-radiation energy transfer, the binding average distance, r, between the donor (BSA) and acceptor (SMZ) was evaluated and found to be 4.12 nm. Spectral results showed the binding of SMZ to BSA induced conformational changes in BSA. The effect of common ions and some of the polymers used in drug delivery for control release was also tested on the binding of SMZ to BSA. The effect of common ions revealed that there is adverse effect on the binding of SMZ to BSA.     

Heat capacity, enthalpy and entropy of strontium niobate Sr2Nb2O7 and calcium niobate Ca2Nb2O7

The heat capacity and the enthalpy increments of strontium niobate Sr₂Nb₂O₇ and calcium niobate Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (720–1370 K). Temperature dependencies of the molar heat capacity in the form C_pm = 248.0 + 0.04350T − 3.948 × 10⁶/T² J K⁻¹ mol⁻¹ for Sr₂Nb₂O₇ and C_pm = 257.2 + 0.03621T − 4.434 × 10⁶/T² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-square method from the experimental data. The molar entropies at 298.15 K, S_m°(298.15 K) = 238.5 ± 1.3 J K⁻¹ mol⁻¹ for Sr₂Nb₂O₇ and S_m°(298.15 K) = 212.4 ± 1.2 J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇, were evaluated from the low-temperature heat capacity measurements.     

Crystal Structure and Thermal Decomposition of 5-Aminotetrazole Trinitrophloroglucinolate

5-Aminotetrazole trinitrophloroglucinolate ((ATZ)TNPG) was prepared and characterized by elemental analysis and FT-IR spectroscopy. The crystal structure was determined by X-ray diffraction analysis and it belonged to orthorhombic system and Pbca space group with a=0.6624(2) nm, b=1.7933(4) nm, c=2.3117(5) nm, V=2.7458(9) nm³, Z=4, and D_c=1.849 g·cm⁻³. The molecular formula was confirmed to be (ATZ)TNPG·2H₂O. 5-Aminotetrazole cation (ATZ⁺) and trinitrophloroglucinol anion (TNPG⁻) were linked into 2-D layers along b-axis and c-axis by hydrogen bonds. Then the layers were linked along a-axis by hydrogen bonds between the water molecules belonging to different layers. The thermal decomposition mechanism of the compound was studied by differential scanning calorimetry (DSC), thermogravimetry-thermogravimetric analysis (TG-DTG), and Fourier transform-infrared (FT-IR) spectroscopy techniques. Under nitrogen atmosphere with a heating rate of 10 °C·min⁻¹, the compound experienced one endothermic process with peak temperature of 76 °C and one exothermal process with peak temperature of 203 °C. The former was confirmed to be a dehydrate process. The latter was the decomposition of TNPG⁻ and ATZ⁺ in the compound. The exothermic enthalpy change of this process was −212.10 kJ·mol⁻¹. The kinetic parameter calculation from Kissinger's method were, E=132.1 kJ·mol⁻¹, ln(A/s⁻¹)=12.54 with r=0.9990, and the calculation results from Ozawa-Doyle's method were, E=133.1 kJ·mol⁻¹ with r=0.9992.     

Thermochemical data for n-alkylmonoamine intercalation into crystalline lamellar zirconium phenylphosphonate

Layered crystalline zirconium phenylphosphonate, Zr(O₃PC₆H₅)₂, changed its interlamellar distance of 1481 pm after intercalation of n-alkylmonoamines, CH₃---(CH₂)_n---NH₂ (n=0–6). The infrared spectra of the precursor host and the corresponding intercalated compounds presented vibrations associated with PO₃ groups in the 1163–1039 cm⁻¹ range and additional bands related to C---H stretching bands in the 2950–2850 cm⁻¹ interval were observed after amine insertion. The thermogravimetric curves showed a mass loss assigned to the phenyl group; however, the amine intercalated fraction was not quantitatively determined. A peak in the ³¹P NMR spectrum centered at −6 ppm for the host was observed. The surface area was 42.0±0.2 m² g⁻¹ and the scanning electron micrograph gave images consistent with lamellar structural features. The layered compound was calorimetrically titrated with amine in ethanol, requiring three independent operations: (i) titration of matrix with amine, (ii) matrix salvation, and (iii) dilution of the amine solution. From those thermal effects the variation in enthalpy was calculated as: −41±1.00,−33.28±0.50,−34.40±0.80,−10.40±0.40,−12.40±0.42,−16.10±0.08 and −7.0±0.04 kJ mol⁻¹, for n=0–6, respectively. The exothermic enthalpic values reflected a favorable energetic process of amine–host intercalation in ethanol. The negative Gibbs free energy results supported the spontaneity of all these intercalation reactions. The positive favorable entropic values, as carbon chain size increased, are in agreement with the free solvent molecules in the medium, as the amines are progressively bonded to the crystalline lamellar inorganic matrix at the solid/liquid interface.     

Modeling of Equilibrium Adsorption and Surface Tension of Cationic Gemini Surfactants

A series of equilibrium tension models are used to evaluate the adsorption behavior of a novel class of lipoaminoacid gemini cationic surfactants, N^α,N^ω-bis(long-chain N^α-acylarginine)α,ω-dialkylamides or bis(Args). For purposes of comparison, the monomer LAM (the methyl ester of N^α-lauroyl arginine) was also examined. These surfactants are of particular interest for both their low toxicity and biocompatibility. The tension models are based on the Gibbs adsorption isotherm and classified as “ionic” when the surface charge and the electric double layer are accounted for or as “pseudo-nonionic” when the surface charge is ignored. Both model predictions and fitted parameter values are evaluated with respect to physical plausibility and overall goodness of fit to the available tension and density data. In particular, the inferred values for the standard Gibbs free energy of adsorption ΔG°, determined from an equilibrium constant defined on a nondimensional basis, without including artifacts due to an electrostatic contribution, are analyzed. The most reliable values of ΔG° are found with the combined model to range from −110 to −120 kJ mol⁻¹ for the three dimers examined and −80 kJ mol⁻¹ for the monomer. For spacer chain lengths n=3, 6, or 9, the maximum surface area of surfactant adsorption and the maximum free energy of adsorption are observed for the surfactant with the spacer chain length of 6.     

Tetrameric O–HO hydrogen-bond systems accompanied by C–HO hydrogen-bonds in the crystal of 1,4-bis(hydroxymethyl)triptycene: an X-ray study

The crystal structure of the title compound was determined (crystal data at 143 K: triclinic, space group P−1, Z=4, a=9.538(2) Å, b=11.638(2) Å, c=14.473(2) Å, α=88.647(3)°, β=89.875(3)°, γ=83.835(3)°, V=1596.9(4) ų). In the crystal there exist two kinds of tetrameric O–HO hydrogen-bond (H-bond) systems that are quite similar to each other. The oxygen atoms accept also intermolecular C–HO H-bonds. The two types of the H-bonds connect the molecules to an infinite two-dimensional supramolecular unit, the stacking of which is aided by an intermolecular C–Hπ H-bond. A phase transition with ΔH_t=4.4±0.1 kJ/mol was found at around 420 K.     

Voltammetric studies on the α-tocopherol anion and α-tocopheroxyl (Vitamin E) radical in acetonitrile

The α-tocopheroxyl radical was generated voltammetrically by one-electron oxidation of the α-tocopherol anion (E ^r_1/2=−0.73 V versus Ag|Ag⁺) that was prepared by reacting α-tocopherol with Et₄NOH in acetonitrile (with Bu₄NPF₆ as the supporting electrolyte). Cyclic voltammograms recorded at variable scan rates (0.05–10 V s⁻¹), temperatures (−20 to 20°C) and concentrations (0.5–10 mM) were modelled using digital simulation techniques to determine the rate of bimolecular self-reaction of α-tocopheroxyl radicals. The k values were calculated to be 3×10³ l mol⁻¹ s⁻¹ at 20°C, 2×10³ l mol⁻¹ s⁻¹ at 0°C and 1.2×10³ l mol⁻¹ s⁻¹ at −20°C. In situ electrochemical-EPR experiments performed at a channel electrode confirmed the existence of the α-tocopheroxyl radical.     

Diffusion of Sr and Zr in BaTiO3 single crystals

The diffusion of strontium and zirconium in single crystal BaTiO₃ was investigated in air at temperatures between 1000 °C and 1250 °C. Thin films of SrTiO₃, deposited by spin coating a precursor solution and thin films of zirconium, deposited onto the sample surfaces by sputtering, were used as diffusion sources. The diffusion profiles were measured by SIMS depth profiling on a time-of-flight secondary ion mass spectrometer (ToF-SIMS). The diffusion coefficients of strontium and zirconium were given by D_Sr = 3.6 × 10^2.0±4.4 exp[−(543 ± 117) kJ mol⁻¹/(RT)] cm² s⁻¹ and D_Zr = 1.1 × 10^1.0±2.1 exp[−(489 ± 56) kJ mol⁻¹/(RT)] cm² s⁻¹. The results are discussed in terms of different diffusion mechanisms in the perovskite structure of BaTiO₃.