Synthesis of Optically Active,X‐Shaped,Conjugated Compounds and Dendrimers Based on Planar Chiral [2.2]Paracyclophane,Leading to Highly Emissive Circularly Polarized Luminescence

Optically active, Fréchet‐type dendrimers containing an emissive X‐shaped π‐electron system as the core unit were synthesized. Gram‐scale optical resolution and transformations of 4,7,12,15‐tetrasubstituted [2.2]paracyclophanes were also carried out. The high‐generation dendrons effectively absorbed UV light and transferred energy to the core, resulting in high photoluminescence (PL) from the core. In addition, the dendrons sufficiently isolated the emissive X‐shaped conjugated core and bright emission was observed from both thin films and solutions. Intense circularly polarized luminescence (CPL) was observed from the thin film. The dendrimer films exhibited excellent optical properties, such as large molar extinction coefficients, high fluorescence quantum efficiencies, intense PL and CPL, and large CPL dissymmetry factors.     

Solution‐Processed Bulk Heterojunction Photovoltaic Cells from Gradient π‐Conjugated Thienylene Vinylene Dendrimers

A series of gradient π‐conjugated dendrimers and their corresponding models based on 5,5,10,10,15,15‐hexahexyltruxene moieties as nodes and oligo(thienylene vinylene) (OTVs) units with different lengths as branching arms are synthesized in good yields through Wittig–Horner reactions. All new compounds are fully characterized by ¹H and ¹³C NMR spectroscopy, elemental analysis, and MALDI‐TOF MS or ESI‐MS. Investigation of their photophysical properties reveals that the gradient dendritic scaffold not only results in a higher molar absorption coefficient and broader absorption region than those of their corresponding model compounds, but also improves the PL quantum yields relative to the corresponding OTVs. The suitable HOMO and LUMO levels as well as excellent film forming properties make these molecules potential candidates for organic solar cells. Solution‐processed bulk heterojunction solar cells using these dendrimers as donor and [6,6]‐phenyl‐C₆₁ butyric acid methyl ester as acceptor are prepared and tested. The power conversion efficiency of the devices based on G0-4-2 is 0.40 % under illumination of air mass 1.5 and 100 mW cm^?2. This is the highest record value for OTV‐based materials to date. Although the absorption band of dendrimer G0-4-2 is much narrower than that of poly(3‐hexylthienylene vinylene) (P3HTV), the efficiency of its solar cell device is almost twice that of the device based on P3HTV. This result shows clearly the advantage of gradient dendritic structures as active materials for photovoltaic cells.     

An elaborate route of exclusive sonogashira polycondensation to alternating BODIPY–porphyrin ethynylene‐conjugated polymer

The first synthesis of the fully conjugated ethynylene‐linked polymer incorporating boron dipyrrine complex (BODIPY) and zinc porphyrin in the main chain was performed based on the exclusive Sonogashira polycondensation. Comprehensive experimental and theoretical investigations lead to an elaborate synthetic route to circumvent the possible side reactions of BODIPY in the presence of the palladium catalyst. Additionally, optimization of the synthetic conditions found that dichloromethane as the solvent suppresses the formation of the pseudo‐trans dimer of the copper acetylide and mitigates the undesired oxidative homocoupling reaction. Eventually, the exclusive Sonogashira polycondensation in dichloromethane provided the alternating BODIPY–porphyrin ethynylene‐conjugated polymer, which displayed absorption up to the near‐infrared wavelengths. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2457–2465     

On‐Surface Synthesis of Ethynylene‐Bridged Anthracene Polymers

Engineering low‐band‐gap π‐conjugated polymers is a growing area in basic and applied research. The main synthetic challenge lies in the solubility of the starting materials, which precludes advancements in the field. Here, we report an on‐surface synthesis protocol to overcome such difficulties and produce poly(p‐anthracene ethynylene) molecular wires on Au(111). To this aim, a quinoid anthracene precursor with =CBr₂ moieties is deposited and annealed to 400 K, resulting in anthracene‐based polymers. High‐resolution nc‐AFM measurements confirm the nature of the ethynylene‐bridge bond between the anthracene moieties. Theoretical simulations illustrate the mechanism of the chemical reaction, highlighting three major steps: dehalogenation, diffusion of surface‐stabilized carbenes, and homocoupling, which enables the formation of an ethynylene bridge. Our results introduce a novel chemical protocol to design π‐conjugated polymers based on oligoacene precursors and pave new avenues for advancing the emerging field of on‐surface synthesis.     

Synthesis and properties of poly(heteroaryleneethynylene)s consisting of electron‐accepting benzothiadiazole/quinoxaline units and electron‐donating alkyl thiophene units

Low‐band‐gap π‐conjugated polymers composed of π‐excessive thiophene and π‐deficient benzothiadiazole and quinoxaline units were prepared in high yields by a polycondensation method using palladium cross‐coupling reactions of alkylthiophene diacetylenes, 4,7‐dibromo‐2,1,3‐benzothiadiazole, and 5,8‐dibromo‐2,3‐dipyridine‐2‐ylquinoxaline. The copolymers were characterized by NMR, IR, UV, gel permeation chromatography, and elemental analysis. High‐molecular‐weight (weight‐average molecular weight up to 82,600 g/mol), thermostable, soluble, and film‐forming materials were obtained. The polymers were photoluminescent in chloroform and showed metallic luster in the solid state. The absorption and emission in solution and in the solid state of the polymers revealed that the polymers generated a π‐stacked structure in the solid state, and the polymer molecules in the film were ordered. Thin films of poly[3‐dodecylthiophen‐2,5‐diylethynylene‐(benzo[1,2,5]thiadiazole‐4,7‐diyl)ethynylene] ( P‐1 ), poly[3,4‐di dodecylthiophen‐2,5‐diylethynylene‐(benzo[1,2,5]thiadiazole‐4,7‐diyl)ethynylene] ( P‐2 ), poly[3‐dodecylthiophene‐2,5‐diylethynylene‐(2,3‐dipyridine‐2‐ylquinoxaline‐5,8‐diyl)ethynylene] ( P‐3 ), and poly[3,4‐didodecylthiophene‐2,5‐diylethynylene‐(2,3‐dipyridine‐2‐ylquinoxaline‐5,8‐diyl)‐ethynylene] ( P‐4 ) exhibited an optical band gap of ～1.85–2.08 eV. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the polymers were determined from electrochemical measurements. In the absorption and emission spectra of these polymers in chloroform/methanol mixtures, all the polymers revealed solvatochromic effects, which were related to the formation of aggregates, as confirmed by temperature‐dependence absorption investigations. The absorption spectra of P‐2 and P‐4 at different temperatures also revealed significant effects of the structure on the molecular interactions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6445–6454, 2005     

Water‐soluble dendritic‐conjugated polyfluorenes: Synthesis,characterization, and interactions with DNA

Three generation of Boc‐protected dendritic‐conjugated polyfluorenes ( Boc‐PFP‐G_0‐2 ) were synthesized by Suzuki coupling 1,4‐phenyldiboronic ester with dendritic monomers that were synthesized through generation‐by‐generation approach. The gel permeation chromatography (GPC) analyses showed that the weight‐average molecular weight (M_w) of Boc‐PFP‐G_0‐2 was in the range of 11,400–20,400 Da with the polydispersity index (PDI) in the range of 1.32–1.96. Treatment of Boc‐protected polymers with 6 M HCl in dioxane yielded cationic dendritic‐conjugated polyfluorenes ( PFP‐G_0‐2 ). They were soluble in common polar solvents such as DMSO, DMF, and water with absorption maxima between 345 and 379 nm. The solutions of PFP‐G_0‐2 in water were highly fluorescent with emission maxima between 416 and 425 nm. Because higher generation dendrons could prevent the formation of π‐stacking aggregates of backbones of conjugated polymer, the fluorescence quantum efficiencies (QEs) of PFP‐G_0‐2 enhance as the dendritic generation grew. The interactions between 25 mer double‐stranded DNA (dsDNA) and PFP‐G_0‐2 were studied using ethidium bromide (EB) as fluorescent probe. The electrostatic bindings of PFP‐G_0‐2 with dsDNA/EB complex result in displacement of EB from DNA double helix to the solution accompanying by a quenching of EB fluorescence. The PFP‐G₂ with highest generation of dendritic side chains possessed a highest charge density and could form most stable complex with dsDNA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7462–7472, 2008     

Silole‐core phenylacetylene dendrimers and their application in detecting picric acid

Silole‐core phenylacetylene dendrimers were designed and synthesized, among them, the model compound (n = 0) and the first generation of the dendrimer (n = 1) were obtained by the reaction of 2,5‐dibromosilole with corresponding terminal alkynes, the second generation of the dendrimers (n = 2) was synthesized from 2,5‐diiodosilole. These compounds indicated the absorptions of both phenylacetylene dendrons (250–350 nm) and silole core (400–500 nm). The first generation displayed efficient energy transfer from phenylacetylene dendrons to silole core, whose energy transfer efficiency was as high as 80%. These compounds were used as chemical sensors to probe explosive, for picric acid (PA), the Stern–Volmer constants of model compound and the first generation are 7120 and 5490M^?1, respectively. J. Heterocyclic Chem., (2012).     

Thiophene‐cored 2,2‐bis(methylol)propionic acid dendrimers for optical‐power‐limiting applications

The synthesis and characterization of dendron‐coated 2,5‐bis(phenylethynyl)thiophene chromophores are described. The dendrimers were grown divergently on the arylthiophene core with the versatile anhydride of 2,2‐bis(methylol)propionic acid. The arylthiophene core was synthesized with Sonogashira coupling reactions. Structurally well‐defined dendrimers up to the fourth generation were grown, as confirmed by size exclusion chromatography, NMR, and matrix‐assisted laser desorption/ionization time‐of‐flight analysis. The different dendritic substitution did not influence the absorption spectra of the compounds in or near the visible region. Solutions of arylthiophenes had good transparency at wavelengths greater than 400 nm. The dendritic thiophenes exhibited an optical‐power limit at the laser wavelength of 532 nm. However, the magnitude of the optical‐power limit of these compounds was slightly lower than that of a nondendritic arylthiophene with n‐pentyl substituents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1177–1187, 2005     

Single‐Crystalline Optical Microcavities from Luminescent Dendrimers

Microcrystallites are promising minute mirrorless laser sources. A variety of luminescent organic compounds have been exploited along this line, but dendrimers have been inapplicable owing to their fragility and extremely poor crystallinity. Now, a dendrimer family that overcomes these difficulties is presented. First‐, second‐, and third‐generation carbazole (Cz) dendrimers with a carbon‐bridged oligo(phenylenevinylene) (COPV2) core (GnCOPV2, n=1–3) assemble to form microcrystals. The COPV2 cores align uni/bidirectionally in the crystals while the Cz units in G2‐ and G3COPV2 align omnidirectionally. The dendrons work as light‐harvesting antennas that absorb non‐polarized light and transfer it to the COPV2 core, from which a polarized luminescence radiates. Furthermore, these crystals act as laser resonators, where the lasing thresholds are strongly coupled with the crystal morphology and the orientation of COPV2, which is in contrast with the conventional amorphous dendrimers.     

2,2′:3′,2′′‐Terthiophene‐Based all‐Thiophene Dendrons and Dendrimers: Synthesis,Structural Characterization,and Properties

The synthesis of generational dendritic oligothiophenes (DOTs) has been successfully achieved by a divergent/convergent approach that involves halogenation, boronation, and palladium‐catalyzed Suzuki coupling reactions. The key point in the presented synthetic approach is the use of trimethylsilyl (TMS) protecting groups, which allow for the core‐lithiation and subsequent boronation of the dendrons and for the peripheral ipso‐substitution with iodine monochloride or N‐bromosuccimide. In addition, the TMS protecting groups can be completely removed by using tetrabutylammonium fluoride, thus yielding only‐thiophene‐based dendrons and dendrimers. Due to their highly branched structure, all these synthesized DOTs are soluble in organic solvents. Chemical structures were confirmed by NMR spectroscopic, mass spectrometric, and elemental analysis. Concentration‐dependent ¹H NMR spectroscopic investigations revealed that the higher generation compounds tend to aggregate in solution. Such an aggregation behavior was further confirmed by measuring with MALDI‐TOF MS. Both MALDI‐TOF MS and gel‐permeation chromatography (GPC) analyses confirmed the monodispersity of the DOTs. Furthermore, GPC results revealed that these DOT molecules adopt a condensed globular molecular shape. Their optical and electronic properties were also investigated. The results indicated that these DOTs comprise various conjugated α‐oligothiophenes with different chain lengths, which results in the higher generation compounds showing broad and featureless UV/Vis absorption spectra and ill‐defined redox waves.     

Polymers with alternating anthracene and phenylene building blocks linked by ethynylene and/or vinylene units: Studying structure‐properties‐relationships

Four conjugated polymers ( P1 – P4 ) consisting of alternating anthracene‐9,10‐diyl and 1,4‐phenylene building blocks connected via ethynylene as well as vinylene ( P1 and P2 ), ethynylene‐only ( P3 ), and vinylene‐only ( P4 ) moieties, respectively, were synthesized and studied. The phenylene units in all four polymers bear 2‐ethylhexyloxy side‐chains to promote good solubility. The three polymers with vinylene units ( P1 , P2 , and P4 ) were prepared using the Horner–Wadsworth–Emmons reaction. For the synthesis of the arylene‐ethynylene polymer P3, the palladium‐catalyzed Sonogashira cross‐coupling reaction was used. The polymers were characterized by NMR, Fourier transform infrared spectroscopy, and Raman spectroscopy. Photophysical, absorption and photoluminescence, and electrochemical properties were studied. Spectroscopic ellipsometry measurements were performed to gain more insight on the optical properties. In addition, the transport properties were investigated using admittance spectroscopy. The bulk hole mobility and its dependence on the electric field were evaluated for P1 and P2 . © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 129–143     

Benzodifuran‐containing well‐defined π‐conjugated polymers for photovoltaic cells

Two well‐defined alternating π‐conjugated polymers containing a soluble electroactive benzo[1,2‐b:4,5‐b′]difuran (BDF) chromophore, poly(BDF‐(9‐phenylcarbazole)) (PBDFC), and poly(BDF‐benzothiadiazole) (PBDFBTD) were synthesized via Sonogashira copolymerizations. Their optical, electrochemical, and field‐effect charge transport properties were characterized and compared with those of the corresponding homopolymer PBDF and random copolymers of the same overall composition. All these polymers cover broad optical absorption ranges from 250 to 750 nm with narrow optical band gaps of 1.78–2.35 eV. Both PBDF and PBDFBTD show ambipolar redox properties with HOMO levels of ?5.38 and ?5.09 eV, respectively. The field‐effect mobility of holes varies from 2.9 × 10^?8 cm² V^?1 s^?1 in PBDF to 1.0 × 10^?5 cm² V^?1 s^?1 in PBDFBTD. Bulk heterojunction solar cell devices were fabricated using the polymers as the electron donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as the electron acceptor, leading to power conversion efficiencies of 0.24–0.57% under air mass 1.5 illumination (100 mW cm^?2). These results indicate that their band gaps, molecular electronic energy levels, charge mobilities, and molecular weights are readily tuned by copolymerizing the BDF core with different π‐conjugated units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Persistent and emission color tunable poly(phenylene‐ethynylene)s covered with polyhedral oligomeric silsesquioxanes

The development of chemically and thermally persistent blue‐, and green‐luminescent hybrid π‐conjugated polymers consisting of poly(phenylene‐ethynylene) conjugated backbone wrapped with the rigid three‐dimensional polyhedral oligomeric silsesquioxane (POSS) units was successfully achieved by means of the Sonogashira‐Hagihara coupling reaction. Because of the steric effect of POSS units, the luminescence stability of the conjugated backbone was significantly enhanced. Moreover, emission color was also easily tunable only by changing the ratio of POSS moieties incorporated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8112–8116, 2008     

Record Multiphoton Absorption Cross‐Sections by Dendrimer Organometalation

Large increases in molecular two‐photon absorption, the onset of measurable molecular three‐photon absorption, and record molecular four‐photon absorption in organic π‐delocalizable frameworks are achieved by incorporation of bis(diphosphine)ruthenium units with alkynyl linkages. The resultant ruthenium alkynyl‐containing dendrimers exhibit strong multiphoton absorption activity through the biological and telecommunications windows in the near‐infrared region. The ligated ruthenium units significantly enhance solubility and introduce fully reversible redox switchability to the optical properties. Increasing the ruthenium content leads to substantial increases in multiphoton absorption properties without any loss of optical transparency. This significant improvement in multiphoton absorption performance by incorporation of the organometallic units into the organic π‐framework is maintained when the relevant parameters are scaled by molecular weights or number of delocalizable π‐electrons. The four‐photon absorption cross‐section of the most metal‐rich dendrimer is an order of magnitude greater than the previous record value.     

Ordered nanostructures from self‐assembly of H‐shaped coil–rod–coil molecules

A new class of π‐conjugated, skewed H‐shaped oligomers, consisting of biphenyl, phenylene vinylene, and phenylene ethynylene units as the rigid segment, were synthesized via Sonogashira coupling and Wittig reactions. The coil segments of these molecules were composed of poly(ethylene oxide) (PEO) or PEO with lateral methyl groups between the rod and coil segment, respectively. The experimental results revealed that the lateral methyl groups attached to the surface of the rod and coil segments dramatically influenced the self‐assembling behavior of the molecules in the crystalline phase. H‐shaped rod–coil molecules containing a lateral methyl group at the surface of the rod and PEO coil segments self‐assemble into a two‐dimensional columnar or a three‐dimensional body‐centered tetragonal nanostructures in the crystalline phase, whereas molecules lacking a lateral methyl group based on the PEO coil chain self‐organize into lamellar or hexagonal perforated lamellar nanostructures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 85–92     

N‐Boc‐Protected 1,2‐Diphenylethylenediamine‐Based Dendritic Organogels with Multiple‐Stimulus‐Responsive Properties

A new class of poly(benzyl ether) dendrimers, decorated in their cores with N‐Boc‐protected 1,2‐diphenylethylenediamine groups, were synthesized and fully characterized. It was found that the gelation capability of these dendrimers was highly dependent on dendrimer generation, and the second‐generation dendrimer (R,R)‐G₂DPENBoc proved to be a highly efficient organogelator. A number of experiments (SEM, TEM, FTIR spectroscopy, ¹H NMR spectroscopy, rheological measurements, UV/Vis absorption spectroscopy, CD, and XRD) revealed that these dendritic molecules self‐assembled into elastically interpenetrating one‐dimensional nanostructures in organogels. The hydrogen bonding, π–π, and solvophobic interactions were found to be the main driving forces for formation of the gels. Most interestingly, these dendritic organogels exhibited smart multiple‐stimulus‐responsive behavior upon exposure to environmental stimuli such as temperature, anions, and mechanical stress.     

Deep‐red light‐emitting phosphorescent dendrimer encapsulated tris‐[2‐benzo[b]thiophen‐2‐yl‐pyridyl] iridium (III) core for light‐emitting device applications

New deep‐red light‐emitting phosphorescent dendrimers with hole‐transporting carbazole dendrons were synthesized by reacting tris(2‐benzo[b]thiophen‐2‐yl‐pyridyl) iridium (III) complex with carbazolyl dendrons by DCC‐catalyzed esterification. The resulting first‐, second‐, and third‐generation dendrimers were found to be highly efficient as solution‐processable emitting materials and for use in host‐free electrophosphorescent light‐emitting diodes. We fabricated a host‐free dendrimer EL device with configuration ITO/PEDOT:PSS (40 nm)/dendrimer (55 nm)/BCP (10 nm)/Alq₃ (40 nm)/LiF (1 nm)/Al (100 nm) and characterized the device performance. The multilayered devices showed luminance of 561 cd/m² at 383.4 mA/cm² (12 V) for 15 , 1302 cd/m² at 321.3 mA/cm² (14 V) for 16 , and 422 cd/m² at 94.4 mA/cm² (18 V) for 17 . The third‐generation dendrimer, 17 (η_ext = 6.12% at 7.5 V), showed the highest external quantum efficiency (EQE) with an increase in the density of the light‐harvesting carbazole dendron. Three dendrimers exhibited considerably pure deep‐red emission with CIE 1931 (Commission International de L'Eclairage) chromaticity coordinates of x = 0.70, y = 0.30. The CIE coordinates remained very stable with the current density. The integration of rigid hole‐transporting dendrons and phosphorescent complexes provides a new route to design highly efficient solution‐processable materials for dendrimer light‐emitting diode (DLED) applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7517–7533, 2008     

Synthesis and characterization of novel π‐conjugated polymers with phosphole ring derivatives

Novel π‐conjugated polymers ( 8 – 10 ) were prepared by the palladium‐catalyzed Sonogashira coupling reaction of three kinds of phosphole‐ring‐containing monomers with 2,5‐dihexyloxyl‐1,4‐diethynylbenzene. The obtained polymers ( 8 – 10 ) were regioregulated with the 2,5‐substituted phosphole ring in the polymer main chain and characterized with ¹H, ¹³C, and ³¹P NMR and FTIR. Polymers 8 – 10 were found to have an extended π‐conjugated system according to the results of UV–vis absorption spectra. In the fluorescence emission spectra of 8 – 10 , moderate emission peaks were observed in the visible blue‐to‐green region. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2867–2875, 2007     

Synthesis,Photophysical, and Two‐Photon Absorption Properties of Elongated Phosphane Oxide and Sulfide Derivatives

A series of rod‐shaped and related three‐branched push–pull derivatives containing phosphane oxide or phosphane sulfide (PO or PS)—as an electron‐withdrawing group conjugated to electron‐donating groups, such as amino or ether groups, with a conjugated rod consisting of arylene–vinylene or arylene–ethynylene building blocks—were prepared. These compounds were efficiently synthesized by a Grignard reaction followed by Sonogashira coupling. Their photophysical properties including absorption, emission, time‐resolved fluorescence, and two‐photon absorption (TPA) were investigated with special attention to structure–property relationships. These fluorophores show high fluorescence quantum yields and solvent‐dependent experiments reveal that efficient intramolecular charge transfer occurs upon excitation, thereby leading to highly polar excited states, the polarity of which can be significantly enhanced by playing on the end groups and conjugated linker. Rod‐shaped and related three‐branched systems show similar fluorescence properties in agreement with excitation localization on one of the push–pull branches. By using stronger electron donors or replacing the arylene–ethynylene linkers with an arylene–vinylene one induces significant redshifts of both the low‐energy one‐photon absorption and TPA bands. Interestingly, a major enhancement in TPA responses is observed, whereas OPA intensities are only weakly affected. Similarly, phosphane oxide derivatives show similar OPA responses than the corresponding sulfides but their TPA responses are significantly larger. Finally, the electronic coupling between dipolar branches promoted by common PO or PS acceptor moieties induces either slight enhancement of the TPA responses or broadening of the TPA band in the near infrared (NIR) region. Such behavior markedly contrasts with triphenylamine‐core‐mediated coupling, which gives evidence for the different types of interactions between branches.     

Effect of terminal groups on the electronic structure of hyperbranched polyacetylene

Quantum mechanics calculations at B3LYP/6‐31G (d)//HF/3‐21G (d) level of the theory were carried out on second generation dendritic polyacetylenic oligomers bearing different terminal groups to clarify the impact of their nature on the electronic structure of hyperbranched polyacetylene. It was found that steric and electronic factors affect the electronic properties of the studied dendrimers. While the steric hindrances independently of the nature of a terminal group tend to increase band gap and ionisation potential and decrease electron affinity, the interaction of lone electron pairs and π‐electrons of the terminal groups with the rest of the molecule produces specific changes in the electronic structure of each particular group. A general feature of the studied dendrimers is that upon ionisation or addition of an electron to the dendrimer the molecules become more planar.