Binary mixed micelles of chiral sodium undecenyl leucinate and achiral sodium undecenyl sulfate: I. Characterization and application as pseudostationary phases in micellar electrokinetic chromatography

Sodium 10-undecenyl sulfate (SUS), sodium 10-undecenyl leucinate (SUL) and their five different mixed micelles at varied percent mole ratios were prepared. The critical micelle concentration (CMC), C₂₀, γ_CMC, partial specific volume, methylene group selectivity, mobilities and elution window were determined using a variety of analytical techniques. These surfactant systems were then evaluated as novel pseudostationary phases in micellar electrokinetic chromatography (MEKC). As a commonly used pseudostationary phase in MEKC, sodium dodecyl sulfate (SDS) was also evaluated. The CMC values of SUS and SUL were found to be 26 and 16 mM, respectively, whereas the CMC of mixed surfactants was found to be very similar to that of SUL. The C₂₀ values decreased dramatically as the concentration of SUL is increased in the mixed micelle. An increase in SUL content gradually increased the methylene group selectivity making the binary mixed surfactants more hydrophobic. Linear solvation energy relationships (LSERs) and free energy of transfer studies were also applied to predict the selectivity differences between the surfactant systems. The cohesiveness and the hydrogen bond acidic character of the surfactant systems were found to have the most significant influence on selectivity and MEKC retention. The SUS and SDS showed the strongest while SUL showed the weakest hydrogen bond donating capacity. The basicity, interaction with n and π-electrons of the solute and dipolarity/polarizability were the least significant factors in LSER model for the surfactant systems studied. Free energies of transfer of selected functional groups in each surfactant systems were also calculated and found to be in good agreement with the LSER data.     

Micellar Liquid Chromatography Study of Quantitative Retention–Activity Relationships for Antihypertensive Drugs

Use of micellar mobile phases in reversed-phase liquid chromatography (RPLC) results in hydrophobic and electrostatic sites for interaction. Modified stationary phases in micellar liquid chromatography (MLC) are structurally similar to biomembranes. To confirm this we focused on the effects of the type and concentration of surfactant (Brij 35, SDS, and CTAB) and mobile phase pH on the retention of antihypertensive drugs on modified C₁₈ stationary phases. Quantitative retention-activity relationships are proposed for the drugs and the different surfactants and compared with those obtained using aqueous–organic mobile phases. Finally, a correlation was obtained between the logarithm of retention factors (log k) and the toxicity (LD₅₀) of antihypertensive drugs. Revised: 14 September 2005 and 4 April 2006     

Micellar proportion: a parameter to compare the hydrophobicity of the pseudostationary phases or that of the analytes in micellar electrokinetic chromatography

Micellar proportion, t(prop,mic) = t(mic)/t(m), a quantity expressing how much time is spent by the analyte in the micellar phase related to its whole migration time (t(m)) has been introduced by utilizing the micellar phase residence time (t(mic)). The t(prop,mic) values have been determined for analytes of different chemical structures (alkyl benzene and alkyl phenone homologous series, alcohols, strongly hydrophobic peptides) studied by micellar elektrokinetic chromatography (MEKC) using various cationic and anionic pseudostationary phases. A good linear correlation was obtained between t(prop,mic) and the calculated hydrophobicity (CLOGP) of the analytes for all pseudostationary phases (CLOGP = A.logt(prop,mic) + B). Considering a given pseudostationary phase, t(prop,mic) as a relative quantity is a suitable parameter to characterize and compare experimentally the behavior of the various analytes in MEKC. Applying a set of probe molecules with known hydrophobicity, the CLOGP(50) value (showing the value of hydrophobicity of a virtual molecule spending exactly 50% of its migration time in the pseudostationary phase) has been calculated for each pseudostationary phase applied here. This experimentally determinable numerical value (characterizing the pseudostationary phase) can be utilized to compare the hydrophobicity and hence retention ability of the pseudostationary phases. The t(prop,mic) value was found to be applicable to compare the methylene selectivity of the different pseudostationary phases as well: logt(prop,mic) = A.Z + B, where Z is the number of carbon atoms of the alkyl chain in the alkyl benzene homologous series.     

Determination of Seven Active Ingredients in Three Plant Essential Oils by Using Micellar Electrokinetic Chromatography

A simple micellar electrokinetic chromatography (MEKC) method was developed for determination of citronellal, citral (Z; E), α-pinene, limonene, linalool, and eugenol in plant essential oils (EOs). A buffer consisting of 20 mM Na₂B₄O₇, 50 mM SDS, 20% (v:v) methanol adjusted to pH 9.5 was found to provide a very efficient and stable electrophoretic system for the analysis. The validation of the method included linearity, LODs, LOQs, precision (intra - and inter - day variation of migration time and peak area), and recovery. Seven terpenoids presented good linearity (R ² > 0.9960) within the test ranges; LODs (S/N = 3) and LOQs (S/N = 10) were 0.2–1.8 µg/mL and 0.8–5.9 µg/mL, respectively. The precision and accuracy were satisfactory, with the overall intra- and inter-day variation (for migration time and peak area, RSD%) being less than 7.0%, and recoveries of this method were greater than 91% at spiked levels. The proposed method was successfully applied to the determination of seven terpenoids in clove oil, litsea cubeba oil, and citronella oil, respectively.     

Influences of the concentration and the molar ratio of mixed surfactants on the performance of vesicle pseudostationary phase

In our previous work, it was found that the vesicles were formed spontaneously by mixing octyltriethylammonium bromide (C₈NE₃Br) with sodium dodecyl benzene sulfonate (SDBS), and the vesicles have been developed as a pseudostationary phase (PSP) in EKC. In the present work, the effects of the concentration and the molar ratio of cationic to anionic surfactant on the vesicle properties and the performances of vesicle PSP in EKC have been investigated. The aggregates at all mixing ratio were negatively charged regardless of which surfactant surplus. As C₈NE₃Br proportion increased, the microviscosity of the vesicle became larger. With the increase in the total surfactant concentration, the migration time window broadened at the molar ratio of C₈NE₃Br to SDBS of 3:7. Unexpectedly, the window became narrowed at molar ratio of 5:5 and 6:4. However, the methylene selectivity of vesicle PSP at all above‐mentioned molar ratios enhanced as the total surfactant concentration increased, no matter whether the migration time window enlarged or narrowed. It implied that the vesicle PSP at molar ratio of 5:5 and 6:4 made it possible to obtain a better separation in a shorter time. When the total surfactant concentration was fixed at 20 mM, the methylene selectivity of the vesicle PSP of molar ratio of 5:5 was comparable to that of 3:7, but the migration time shortened by a half.     

聚(苯乙烯-co-甲基丙烯酸)自组装胶束假固定相电动色谱的特性

研究了两亲性无规共聚物聚(苯乙烯-co-甲基丙烯酸)(P(St-co-MAA))(单体摩尔比分别为6:4和7:3)自组装胶束的物理化学性质,及其作为假固定相(PSP)的胶束电动色谱性能。测定了聚合物胶束的临界胶束浓度(CMC),对胶束内核微环境的极性、表面电荷密度和流体力学直径等微结构参数进行了表征,对时间窗口、亚甲基选择性等电动色谱参数进行了测定,并与聚(甲基丙烯酸甲酯-co-甲基丙烯酸)(P(MMA-co-MAA))胶束、十二烷基硫酸钠(SDS)胶束体系进行了比较;利用线性溶剂化能关系(LSER)研究了聚合物PSP的选择性差异。结果表明:P(St-co-MAA)体系具有最小的CMC、最宽的时间窗口和最好的亚甲基选择性;LSER表明,疏水作用是决定聚合物PSP选择性的最主要因素,氢键酸度其次,特别是P(St-co-MAA)(单体摩尔比7:3)体系具有最高的作用参数,显示了该PSP具有较高的分离选择性。     

Higher hydrates of lithium chloride,lithium bromide and lithium iodide

For lithium halides, LiX (X = Cl, Br and I), hydrates with a water content of 1, 2, 3 and 5 moles of water per formula unit are known as phases in aqueous solid–liquid equilibria. The crystal structures of the monohydrates of LiCl and LiBr are known, but no crystal structures have been reported so far for the higher hydrates, apart from LiI·3H₂O. In this study, the crystal structures of the di‐ and trihydrates of lithium chloride, lithium bromide and lithium iodide, and the pentahydrates of lithium chloride and lithium bromide have been determined. In each hydrate, the lithium cation is coordinated octahedrally. The dihydrates crystallize in the NaCl·2H₂O or NaI·2H₂O type structure. Surprisingly, in the tri‐ and pentahydrates of LiCl and LiBr, one water molecule per Li⁺ ion remains uncoordinated. For LiI·3H₂O, the LiClO₄·3H₂O structure type was confirmed and the H‐atom positions have been fixed. The hydrogen‐bond networks in the various structures are discussed in detail. Contrary to the monohydrates, the structures of the higher hydrates show no disorder.     

Studies of Monolayer and Mixed Micelle Formation of Anionic and Nonionic Surfactants in the Presence of Adenosine-5-monophosphate

The interactions between the anionic surfactant di-(2-ethylhexyl) phosphate sodium salt (DEP) and two nonionic surfactants, dimethyldecyl phosphineoxide (DDPO) and dimethyltetradecyl phosphineoxide (DTPO), at the interface and in the micellar phases were investigated in the absence and presence of adenosine-5-monophosphoric acid disodium salt (AMP). The mixed systems were DEP–DDPO, DEP–DDPO/AMP (0.001 mol⋅L⁻¹), DEP–DTPO, and DEP–DTPO/AMP (0.001 mol⋅L⁻¹) at different bulk mole fractions of the anionic component (α ₁=0.9,0.8,0.6,0.4,0.2). The mixed systems studied were investigated based on the theoretical models of Rubingh and Clint. The results showed surface tension reduction efficiency. The adsorbed mixed monolayer demonstrated stronger interactions than the mixed micelles, whereas AMP increased the interfacial interactions more than those in the micellar phase. The Gibbs energy of mixing suggests that the stability of the mixed micellar phase is greater than that of the micellar phases of the individual components. The synergism that occurred in the different mixed phases is discussed.     

Conductivity of lithium perfluorononanoate in water-poly(vinyl pyrrolidone) solutions

Conductivity measurements, focused on the counterion binding of lithium perfluorononanoate (LiPFN) micelles in pure water and in the presence of poly(vinyl pyrrolidone) (PVP), have been carried out. An abrupt decrease of the conductance of the LiPFN in pure water, due to the self aggregation of anions and to dynamic linkage of cations on the micellar surface, has been found. Analysis of the conductometric data indicates that about 50% of the stoichiometric concentration of Li⁺ interacts with the head groups of the perfluorinated anions involved in micellar assembly. Conductometric data of LiPFN-water-PVP systems reveals a favorable influence of the PVP on the micellization process modulated by the concentration and by the molecular weight of the polymer. Analysis of these data shows that in presence of PVP the degree of binding of lithium ion to the micellar assemblies linked to the polymer is smaller than in pure water. By increasing the amount of surfactant in solution up to the concentration where the polymer becomes saturated by LiPFN micelles, the binding of lithium ion in the system becomes slightly greater than that observed in LiPFN-water system. This finding can be interpreted in terms of additional binding of lithium ion to the polymer chains. Conductivity measurements carried out on LiClO₄ and KClO₄ in water + PVP support this interpretation.     

Standard partial molar volumes of alcohols in aqueous dodecyltrimethylammonium bromide solutions

Density measurements of water-dodecyltrimethylammonium bromide (DTAB)-alcohol ternary systems as a function of alcohol and surfactant concentrations were carried out at 25°C. The alcohols were propanol (PrOH), 2-propanol (2-PrOH) and hexanol (HexOH). The apparent molar volume V_,R of alcohols have been calculated and the standard (infinite dilution) partial molar volumes of alcohols V _R at each surfactant concentration were obtained by means of a least squares fit of V_,R vs. the alcohol concentration. The V _R vs. surfactant concentration curves have been rationalized in terms of the partial molar volume of alcohol in the aqueous V _f and the micellar V _b phases and the distribution constant of alcohol between the aqueous and the micellar phases K. The V _b values for PrOH and HexOH together with those of butanol and pentanol previously reported satisfy the additivity rule giving a methylene group contribution of 16.7 cm³-mol^–1 which is identical to that reported in the literature from the study of pure liquid alcohols. No difference between V _b for PrOH and 2-PrOH has been found. From density data of water-alcohol and water-surfactant binary systems and of water-surfactant-alcohol ternary system, the apparent molar volume of the surfactant in the water-alcohol mixed solvent V_,S have been calculated as a function of the surfactant concentration and of the mixed solvent composition. The effect of the alkyl chain length of the alcohols and the effect of isomerization of the alcohols on the V_,S vs. surfactant concentration trends have been analyzed.     

Anionic polymerization of methacrylate monomers initiated by lithium dialkylamides

The anionic polymerization of methacrylate monomers has been investigated with lithium dialkylamides as initiators in THF and toluene, respectively. Theoretical arguments and previous studies of mixed aggregates of lithiated organic compounds support the complexity of these systems. Lithium diisopropylamide (LDA) shows the highest initiation efficiency (e.g., f = 75% in THF at −78°C). Interestingly enough, lithium chloride has a remarkable beneficial effect on the methacrylates polymerization in THF at −78°C, due to the formation of 1 : 1 mixed dimer with LDA, which promotes a well-controlled anionic polymerization (M_w/M_n = 1.05) with a high initiation efficiency (94%). The less bulky lithium–diethylamide (LDEA) is much less efficient (f = 26%), essentially as a result of some associated “dormant” species and side reactions on the carbonyl group of MMA. Although various types of ligands have been screened, no remarkable improvement of LDEA efficiency has been observed. Lithium bis(trimethylsilyl)amide (LTMSA) has also been used to increase the steric hindrance of the initiator. This compound is, however, unable to initiate the methacrylates polymerization, more likely because of a too low basicity and a too strong Li—N bond. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3637–3644, 1997     

Simultaneous separation of sixteen positional and optical isomers of the tryptophan family by ligand-exchange micellar electrokinetic chromatography

Summary Ligand-exchange micellar electrokinetic chromatography has been used for the simultaneous separation of 16 positional and optical isomers of the tryptophan family. The Cu(II) complex with L-hydroxyproline was used as the chiral selector. Two groups of anionic surfactant, linear alkylbenzenesulfonates (LAS) and straight-chain alkyl sulfates such as sodiumn-decyl sulfate (SDeS), sodium dodecyl sulfate (SDS) and sodiumn-tetradecyl sulfate (STS), were used for simultaneous separation. The best result was obtained by use of SDS. The influence of SDS concentration and of pH on the separation was investigated. The separation behavior in the absence of the Cu(II) complex with L-hydroxyproline was also examined. Use of organic modifiers causes the resolution to decrease. Relationships between the logarithm of the octanol-water partition coefficient (logP _OW) and resolution, and between logP _OW and migration time are discussed.     

Fluorescence Probe Studies of Ionic Micelles in Concentrated Salt Solutions

We have investigated the effect of salt concentration and temperature on the average aggregation number and micro-polarity of the interior of micelles of sodium dodecyl sulfate (SDS). sodium tetradecyl sulfate (STDS) and lithium dodecyl sulfate (LiDS). The transient fluorescence decay of micelle-solubilized pyrene has been measured and analyzed. An exponent weighted average aggregation number <n>_e was obtained by this technique. For SDS and STDS in NaCl solution, <n>_e increases as the temperature is lowered or salt concentration is increased <n>_e increased from ～ 50 to ～ 250 over [NaCl] = 0 to 0.8 M. Due to the strong counterion binding of lithium in the micellar solution, the LiDS micelle is much, smaller and does not increase appreciabily even at [LiCl] =0.8 M. From the fluorescence spectrum fine structure of pyrene and the fluorescence decay of the monomer and excimer, we can understand the local polarity and the water penetration to the interior of the micelle upon addition of salts and with changing temperature. The interior of the micelle becomes more nonpolar as the salt concentration is increased and the temperature is lowered. A complete kinetic analysis of the time–dependence of the fluorescence is given. The kinetic analysis is in agreement with the results reached by fluorescence spectral analysis.     

The chromatographic quantification of hydrophobicity using micellar mobile phases

Summary In micellar liquid chromatography (MLC), the hydrophobicity of a compound is the predominant factor in its retention and interaction with micelles. A non-linear empirical model can describe the dependence between the retention factor (logk) in MLC and the logarithm of partition coefficients octanol-water (logP). An algorithm based on such a model has been used to makelogP predictions. Retention data for series of neutral compounds eluted with different mobile phases and alkyl-bonded stationary phases have been used to test the predictive ability of the algorithm. The results of this approach are compared with those obtained from automatic computational software packages.     

Separation and selectivity in micellar electrokinetic chromatography using sodium dodecyl sulfate micelles or Tween 20-modified mixed micelles

The separation and selectivity of eight aromatic compounds ranging from hydrophilic to hydrophobic properties in micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate (SDS) micelles or Tween 20-modified mixed micelles were investigated. The effect of different operation conditions such as SDS and Tween 20 modifier surfactant concentration, buffer pH, and applied voltage was studied. The resolution and selectivity of analytes could be markedly affected by changing the SDS micelle concentration or Tween 20 content in the mixed micelles. Applied voltage and pH of running buffers were used mainly to shorten the separation time. Complete separation of eight analytes could be achieved with an appropriate choice of the concentration of SDS micelles or Tween 20-modified mixed micelles. Quicker elution and better precision could be obtained with SDS-Tween 20 mixed micelles than with SDS micelles. The mechanisms that migration order of those analytes was mainly based on their structures and solute-micelle interactions, including hydrophobic, electrostatic, and hydrogen bonding interactions, were discussed.     

A viscometric study of tuning micellar morphology by organic additives

The micellar morphology in aqueous 0.2 M sodium dodecyl sulfate (SDS) solutions has been studied in the simultaneous presence of organic salts (anilinium hydrochloride, AHC; ortho-toluidine hydrochloride, oTHC; para-toluidine hydrochloride, pTHC) and aliphatic alcohols (n-butanol, C₄OH; n-pentanol, C₅OH; n-hexanol, C₆OH; n-heptanol, C₇OH), aliphatic amines (n-butylamine, C₄NH₂; n-pentylamine, C₅NH₂; n-hexylamine, C₆NH₂; n-heptylamine, C₇NH₂), or hydrocarbons (n-hexane, C₆H; n-heptane, C₇H) by viscosity measurements under Newtonian flow conditions at 30 °C. Addition of alcohols and amines causes micellar growth which is found to be dependent upon chain length of the additive and nature of organic salt counterion. It is observed that amines are more effective in increasing the viscosity of the system if added in pure 0.2 M SDS solution, while SDS + pTHC system was found versatile when alcohols were added to this system. The increased viscosity or the micellar growth is explained in terms of the site of solubilization of the respective additive and the interaction of the additive with micellar surface and salt counterion present in the head group region. Hydrocarbons are nearly ineffective in inducing micellar growth and can be used as ‘micellar destroyer’ for the grown micelles. The additives used are found effective in tuning the environment of the micelle which is reflected in viscosity behavior. This work may find use in micellar ultrafiltration as well as in mimicking the natural cell, which has several aspects common with the micelle.     

Micellar effect on the electron transfer reaction of chromium(V) ion with organic sulfides

The rate of electron transfer from organic sulfides to [Cr^V(ehba)₂]⁻ (ehba-2-ethyl-2-hydroxy butyric acid) decreases with a decrease in the polarity of the medium. The anionic surfactant, SDS and the cationic surfactant, CTAB have different effects on the kinetics of this reaction. The micellar inhibition observed in the presence of SDS is probably due to the decrease in the polarity and the electrostatic repulsion faced by the anionic oxidant from the anionic micelle and the partition of the hydrophobic substrate between the aqueous and micellar phases. The micellar catalysis in the presence of CTAB is attributed to the increase in the concentration of both reactants in the micellar phase. This micellar catalysis is observed to offset the retarding effects of the less polar micellar medium and the unfavorable charge-charge interaction between the + charge developed on S center in the transition state and the cationic micelle. This catalysis is contrary to the enormous micellar inhibition observed with IO₄⁻, HSO₅⁻ and HCO₄⁻ oxidation of organic sulfides.     

Separation of Six Pyridoncarboylxic Acid Derivatives by Micellar and Microemulsion Electrokinetic Chromatography

Micellar electrokinetic chromatography (MEKC) and microemulsion electrokinetic chromatography (MEEKC) are two kinds of electrokinetic capillary chromatography (EKC), which are characterized of high solubilization capacity and separation efficiency. In our previous work, some polar organic compounds and hydrophobic neutral compounds were separated successfully by EKC1-3. In this paper, these methods were used for separating six pyridoncarboylxic acid derivatives with similar structures. T…     

Investigation of new fluxes for the single-crystal growth of stoichiometric lithium niobate

Thermoanalytical and crystal growth investigations of the ternary system Cs₂O-Li₂O-Nb₂O₅ are presented in order to grow stoichiometric LiNbO₃ (LN) crystals. Part of the phase diagram is determined and subsolidus phases are identified at room temperature by X-ray powder diffraction. Among the constituent phases, a new tetragonal cesium lithium niobate phase is assessed. From the Cs₂O-Li₂O-Nb₂O₅ system, good quality quasi-stoichiometric LN crystals can be grown.