Comparative Studies of Thermally Induced Homolytic CarbonCarbon Bond Cleavage Reactions of Strained Dicarba[2]ferrocenophanes and Their Ring‐Opened Oligomers and Polymers

Reactivity studies of dicarba[2]ferrocenophanes and also their corresponding ring‐opened oligomers and polymers have been conducted in order to provide mechanistic insight into the processes that occur under the conditions of their thermal ring‐opening polymerisation (ROP) (300 °C). Thermolysis of dicarba[2]ferrocenophane rac‐[Fe(η⁵‐C₅H₄)₂(CHPh)₂] (rac‐ 14 ; 300 °C, 1 h) does not lead to thermal ROP. To investigate this system further, rac‐ 14 was heated in the presence of an excess of cyclopentadienyl anion, to mimic the postulated propagating sites for thermally polymerisable analogues. This afforded acyclic [(η⁵‐C₅H₅)Fe(η⁵‐C₅H₄)‐CH₂Ph] ( 17 ) through cleavage of both a Fe?Cp bond and also the C?C bond derived from the dicarba bridge. Evidence supporting a potential homolytic C?C bond cleavage pathway that occurs in the absence of ring‐strain was provided through thermolysis of an acyclic analogue of rac‐ 14 , namely [(η⁵‐C₅H₅)Fe(η⁵‐C₅H₄)(CHPh)₂‐C₅H₅] ( 15 ; 300 °C, 1 h), which also afforded ferrocene derivative 17 . This reactivity pathway appears general for post‐ROP species bearing phenyl substituents on adjacent carbons, and consequently was also observed during the thermolysis of linear polyferrocenylethylene [Fe(η⁵‐C₅H₄)₂(CHPh)₂]_n ( 16 ; 300 °C, 1 h), which was prepared by photocontrolled ROP of rac‐ 14 at 5 °C. This afforded ferrocene derivative [Fe(η⁵‐C₅H₄CH₂Ph)₂] ( 23 ) through selective cleavage of the ?H(Ph)C?C(Ph)H? bonds in the dicarba linkers. These processes appear to be facilitated by the presence of bulky, radical‐stabilising phenyl substituents on each carbon of the linker, as demonstrated through the contrasting thermal properties of unsubstituted linear trimer [(η⁵‐C₅H₅)Fe(η⁵‐C₅H₄)(CH₂)₂(η⁵‐C₅H₄)Fe(η⁵‐C₅H₄)(CH₂)₂(η⁵‐C₅H₄)Fe(η⁵‐C₅H₅)] ( 29 ) with a ?H₂C?CH₂? spacer, which proved significantly more stable under analogous conditions. Evidence for the radical intermediates formed through C?C bond cleavage was detected through high‐resolution mass spectrometric analysis of co‐thermolysis reactions involving rac‐ 14 and 15 (300 °C, 1 h), which indicated the presence of higher molecular weight species, postulated to be formed through cross‐coupling of these intermediates.     

Ansa‐Complexes of [Mn(η5‐C5H5)(η6‐C6H6)]: Preparation,Characterization, and Reactivity of [n]Manganoarenophanes (n=1, 2, 3)

We report the synthesis of [n]manganoarenophanes (n=1, 2) featuring boron, silicon, germanium, and tin as ansa‐bridging elements. Their preparation was achieved by salt‐elimination reactions of the dilithiated precursor [Mn(η⁵‐C₅H₄Li)(η⁶‐C₆H₅Li)]?pmdta (pmdta=N,N,N′,N′,N′′‐pentamethyldiethylenetriamine) with corresponding element dichlorides. Besides characterization by multinuclear NMR spectroscopy and elemental analysis, the identity of two single‐atom‐bridged derivatives, [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] and [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SiPh₂], could also be determined by X‐ray structural analysis. We investigated for the first time the reactivity of these ansa‐cyclopentadienyl–benzene manganese compounds. The reaction of the distannyl‐bridged complex [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)Sn₂tBu₄] with elemental sulfur was shown to proceed through the expected oxidative addition of the Sn?Sn bond to give a triatomic ansa‐bridge. The investigation of the ring‐opening polymerization (ROP) capability of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] with [Pt(PEt₃)₃] showed that an unexpected, unselective insertion into the C_ipso?Sn bonds of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] had occurred.     

Platinum Complexes of a Borane‐Appended Analogue of 1,1′‐Bis(diphenylphosphino)ferrocene: Flexible Borane Coordination Modes and in situ Vinylborane Formation

A bis(phosphine)borane ambiphilic ligand, [Fe(η⁵‐C₅H₄PPh₂)(η⁵‐C₅H₄PtBu{C₆H₄(BPh₂)‐ortho})] (FcPPB), in which the borane occupies a terminal position, was prepared. Reaction of FcPPB with tris(norbornene)platinum(0) provided [Pt(FcPPB)] ( 1 ) in which the arylborane is η³BCC‐coordinated. Subsequent reaction with CO and CNXyl (Xyl=2,6‐dimethylphenyl) afforded [PtL(FcPPB)] {L=CO ( 2 ) and CNXyl ( 3 )} featuring η²BC‐ and η¹B‐arylborane coordination modes, respectively. Reaction of 1 or 2 with H₂ yielded [PtH(μ‐H)(FcPPB)] in which the borane is bound to a hydride ligand on platinum. Addition of PhC₂H to [Pt(FcPPB)] afforded [Pt(C₂Ph)(μ‐H)(FcPPB)] ( 5 ), which rapidly converted to [Pt(FcPPB′)] ( 6 ; FcPPB′=[Fe(η⁵‐C₅H₄PPh₂)(η⁵‐C₅H₄PtBu{C₆H₄(BPh‐CPh=CHPh‐Z)‐ortho}]) in which the newly formed vinylborane is η³BCC‐coordinated. Unlike arylborane complex 1 , vinylborane complex 6 does not react with CO, CNXyl, H₂ or HC₂Ph at room temperature.     

Isolation of New Disilanylene-bridged Bis（cyclopentadienyl）tetracarbonyldiiron Complexes and Molecular Structure of [η^5, η^5-C5H4SiMe（SiMePh2）C5H4]Fe2（CO）2（μ-CO）2

1,2-Diphenyl-1,2-dimethyldisilanylene-bridged bis-cyclopentadienyl complex[η~5,η~5-C_5H_4PhMeSiSiMePh-C_5H_4]Fe_2(CO)_2(μ-CO)_2(1)was synthesized by a modified procedure,from which the trans-isomer 1b that was pre-viously difficult to obtain has been isolated for the first time.More interestingly,two new regio-isomers[η~5,η~5C_5H_4SiMe(SiMePh_2)C_5H_4]Fe_2(CO)_2(μ-CO)_2(2)and [η~5,η~5-C_5H_4Me_2SiSiPh_2C_5H_4]Fe_2(CO)_2(μ-CO)_2(3)were occa-sionally obtained during above process,the novel structures of which opened up new options for further study ofthis type of Si—Si bond-containing transition metal complexes.The molecular structure of 2 has been determinedby the X-ray diffraction method.     

Cationic Allyl Complexes of the Rare‐Earth Metals: Synthesis,Structural Characterization,and 1,3‐Butadiene Polymerization Catalysis

Monocationic bis‐allyl complexes [Ln(η³‐C₃H₅)₂(thf)₃]⁺[B(C₆X₅)₄]^? (Ln=Y, La, Nd; X=H, F) and dicationic mono‐allyl complexes of yttrium and the early lanthanides [Ln(η³‐C₃H₅)(thf)₆]²⁺[BPh₄]₂^? (Ln=La, Nd) were prepared by protonolysis of the tris‐allyl complexes [Ln(η³‐C₃H₅)₃(diox)] (Ln=Y, La, Ce, Pr, Nd, Sm; diox=1,4‐dioxane) isolated as a 1,4‐dioxane‐bridged dimer (Ln=Ce) or THF adducts [Ln(η³‐C₃H₅)₃(thf)₂] (Ln=Ce, Pr). Allyl abstraction from the neutral tris‐allyl complex by a Lewis acid, ER₃ (Al(CH₂SiMe₃)₃, BPh₃) gave the ion pair [Ln(η³‐C₃H₅)₂(thf)₃]⁺[ER₃(η¹‐CH₂CH?CH₂)]^? (Ln=Y, La; ER₃=Al(CH₂SiMe₃)₃, BPh₃). Benzophenone inserts into the La? C_allyl bond of [La(η³‐C₃H₅)₂(thf)₃]⁺[BPh₄]^? to form the alkoxy complex [La{OCPh₂(CH₂CH?CH₂)}₂(thf)₃]⁺[BPh₄]^?. The monocationic half‐sandwich complexes [Ln(η⁵‐C₅Me₄SiMe₃)(η³‐C₃H₅)(thf)₂]⁺[B(C₆X₅)₄]^? (Ln=Y, La; X=H, F) were synthesized from the neutral precursors [Ln(η⁵‐C₅Me₄SiMe₃)(η³‐C₃H₅)₂(thf)] by protonolysis. For 1,3‐butadiene polymerization catalysis, the yttrium‐based systems were more active than the corresponding lanthanum or neodymium homologues, giving polybutadiene with approximately 90 % 1,4‐cis stereoselectivity.     

Influence of Cyclopentadienyl Ring‐Tilt on Electron‐Transfer Reactions: Redox‐Induced Reactivity of Strained [2] and [3]Ruthenocenophanes

In contrast to ruthenocene [Ru(η⁵‐C₅H₅)₂] and dimethylruthenocene [Ru(η⁵‐C₅H₄Me)₂] ( 7 ), chemical oxidation of highly strained, ring‐tilted [2]ruthenocenophane [Ru(η⁵‐C₅H₄)₂(CH₂)₂] ( 5 ) and slightly strained [3]ruthenocenophane [Ru(η⁵‐C₅H₄)₂(CH₂)₃] ( 6 ) with cationic oxidants containing the non‐coordinating [B(C₆F₅)₄]^? anion was found to afford stable and isolable metal?metal bonded dicationic dimer salts [Ru(η⁵‐C₅H₄)₂(CH₂)₂]₂[B(C₆F₅)₄]₂ ( 8 ) and [Ru(η⁵‐C₅H₄)₂(CH₂)₃]₂[B(C₆F₅)₄]₂ ( 17 ), respectively. Cyclic voltammetry and DFT studies indicated that the oxidation potential, propensity for dimerization, and strength of the resulting Ru?Ru bond is strongly dependent on the degree of tilt present in 5 and 6 and thereby degree of exposure of the Ru center. Cleavage of the Ru?Ru bond in 8 was achieved through reaction with the radical source [(CH₃)₂NC(S)S?SC(S)N(CH₃)₂] (thiram), affording unusual dimer [(CH₃)₂NCS₂Ru(η⁵‐C₅H₄)(η³‐C₅H₄)C₂H₄]₂[B(C₆F₅)₄]₂ ( 9 ) through a haptotropic η⁵–η³ ring‐slippage followed by an apparent [2+2] cyclodimerization of the cyclopentadienyl ligand. Analogs of possible intermediates in the reaction pathway [C₆H₅ERu(η⁵‐C₅H₄)₂C₂H₄][B(C₆F₅)₄] [E=S ( 15 ) or Se ( 16 )] were synthesized through reaction of 8 with C₆H₅E?EC₆H₅ (E=S or Se).     

Synthesis and Reactivity of Boron‐, Silicon‐, and Tin‐Bridged ansa‐Cyclopentadienyl–Cycloheptatrienyl Titanium Complexes (Troticenophanes)

A novel one‐pot method was developed for the preparation of [Ti(η⁵‐C₅H₅)(η⁷‐C₇H₇)] (troticene, 1 ) by reaction of sodium cyclopentadienide (NaCp) with [TiCl₄(thf)₂], followed by reduction of the intermediate [(η⁵‐C₅H₅)₂TiCl₂] with magnesium in the presence of cycloheptatriene (C₇H₈). The [n]troticenophanes 3 (n=1), 4 , 8 , 10 (n=2), and 11 (n=3) were synthesized by salt elimination reactions between dilithiated troticene, [Ti(η⁵‐C₅H₄Li)(η⁷‐C₇H₆Li)] ? pmdta ( 2 ) (pmdta=N,N′,N′,N′′,N′′‐pentamethyldiethylenetriamine), and the appropriate organoelement dichlorides Cl₂Sn(Mes)₂ (Mes=2,4,6‐trimethylphenyl), Cl₂Sn₂(tBu)₄, Cl₂B₂(NMe₂)₂, Cl₂Si₂Me₄, and (ClSiMe₂)₂CH₂, respectively. Their structural characterization was carried out by single‐crystal X‐ray diffraction and multinuclear NMR spectroscopy. The stanna[1]‐ and stanna[2]troticenophanes 3 and 4 represent the first heteroleptic sandwich complexes bearing Sn atoms in the ansa bridge. The reaction of 3 with [Pt(PEt₃)₃] resulted in regioselective insertion of the [Pt(PEt₃)₂] fragment into the Sn? C_ipso bond between the tin atom and the seven‐membered ring, which afforded the platinastanna[2]troticenophane 5 . Oxidative addition was also observed upon treatment of 4 with elemental sulfur or selenium, to produce the [3]troticenophanes [Ti(η⁵‐C₅H₄SntBu₂)(η⁷‐C₇H₆SntBu₂)E] ( 6 : E=S; 7 : E=Se). The B? B bond of the bora[2]troticenophane 8 was readily cleaved by reaction with [Pt(PEt₃)₃] to form the corresponding oxidative addition product [Ti(η⁵‐C₅H₄BNMe₂)(η⁷‐C₇H₆BNMe₂)Pt(PEt₃)₂] ( 9 ). The solid‐state structures of compounds 5 , 6 , and 9 were also determined by single‐crystal X‐ray diffraction.     

Reaction of (η5‐C5H5)Fe(CO)2I with Anionic Bidentate Phosphine Ligands PPh2(o‐C6H4NHLi) or PPh2(o‐C6H4OLi)

The o‐substituted hybrid phenylphosphines, PPh₂(o‐C₆H₄NH₂) and PPh₂(o‐C₆H₄OH), could be deprotonated with LDA or n‐BuLi to yield PPh₂(o‐C₆H₄NHLi) and PPh₂(o‐C₆H₄OLi), respectively. When added to a solution of (η⁵‐C₅H₅)Fe(CO)₂I at room temperature, these two lithiated reagents produce a chelated neutral complex 1 (η⁵‐C₅H₅)Fe(CO)[C(O)NH(o‐C₆H₄)PPh₂‐C,P‐η²] for the former and mainly a zwitterionic complex 2 , (η⁵‐C₅H₅)Fe⁺(CO)₂[PPh₂(o‐C₆H₄O^?)] for the latter. Complex 1 could easily be protonated and then decarbonylated to give 4 [(η⁵‐C₅H₅)Fe(CO){NH₂(o‐C₆H₄)PPh₂‐N,P‐η²}⁺]. Complexes 1 and 4‐I have been crystallographically characterized with X‐ray diffraction.     

Diimido‐, Imido(oxo)‐, Dioxo‐ und Imido(alkyliden)‐Halbsandwich‐Verbindungen über selektive Hydrolyse und α—H‐Abstraktion an Organylkomplexen des sechswertigen Molybdäns und Wolframs

Diimido, Imido Oxo, Dioxo, and Imido Alkylidene Halfsandwich Compounds via Selective Hydrolysis and α—H Abstraction in Molybdenum(VI) and Tungsten(VI) Organyl Complexes Organometal imides [(η⁵‐C₅R₅)M(NR′)₂Ph] (M = Mo, W, R = H, Me, R′ = Mes, tBu) 4 — 8 can be prepared by reaction of halfsandwich complexes [(η⁵‐C₅R₅)M(NR′)₂Cl] with phenyl lithium in good yields. Starting from phenyl complexes 4 — 8 as well as from previously described methyl compounds [(η⁵‐C₅Me₅)M(NtBu)₂Me] (M = Mo, W), reactions with aqueous HCl lead to imido(oxo) methyl and phenyl complexes [(η⁵‐C₅Me₅)M(NtBu)(O)(R)] M = Mo, R = Me ( 9 ), Ph ( 10 ); M = W, R = Ph ( 11 ) and dioxo complexes [(η⁵‐C₅Me₅)M(O)₂(CH₃)] M = Mo ( 12 ), M = W ( 13 ). Hydrolysis of organometal imides with conservation of M‐C σ and π bonds is in fact an attractive synthetic alternative for the synthesis of organometal oxides with respect to known strategies based on the oxidative decarbonylation of low valent alkyl CO and NO complexes. In a similar manner, protolysis of [(η⁵‐C₅H₅)W(NtBu)₂(CH₃)] and [(η⁵‐C₅Me₅)Mo(NtBu)₂(CH₃)] by HCl gas leads to [(η⁵‐C₅H₅)W(NtBu)Cl₂(CH₃)] 14 und [(η⁵‐C₅Me₅)Mo(NtBu)Cl₂(CH₃)] 15 with conservation of the M‐C bonds. The inert character of the relatively non‐polar M‐C σ bonds with respect to protolysis offers a strategy for the synthesis of methyl chloro complexes not accessible by partial methylation of [(η⁵‐C₅R₅)M(NR′)Cl₃] with MeLi. As pure substances only trimethyl compounds [(η⁵‐C₅R₅)M(NtBu)(CH₃)₃] 16 ‐ 18 , M = Mo, W, R = H, Me, are isolated. Imido(benzylidene) complexes [(η⁵‐C₅Me₅)M(NtBu)(CHPh)(CH₂Ph)] M = Mo ( 19 ), W ( 20 ) are generated by alkylation of [(η⁵‐C₅Me₅)M(NtBu)Cl₃] with PhCH₂MgCl via α‐H abstraction. Based on nmr data a trend of decreasing donor capability of the ligands [NtBu]^2— > [O]^2— > [CHR]^2— ? 2 [CH₃]^— > 2 [Cl]^— emerges.     

[μ‐1κ2O,O′:2(η5)‐Cyclopentadienylcarboxylato][2(η5)‐diphenylphosphinocyclopentadienyl]bis[1,1(η5)‐tetramethylcyclopentadienyl]iron(II)titanium(III)

Reacting stoichiometric amounts of 1‐(diphenylphosphino)ferrocene­carboxylic acid and [Ti(η⁵‐C₅HMe₄)₂(η²‐Me₃SiC[triple‐bond]CSiMe₃)] produced the title carboxyl­atotitanocene complex, [{μ‐1κ²O,O′:2(η⁵)‐C₅H₄CO₂}{2(η⁵)‐C₅H₄P(C₆H₅)₂}{1(η⁵)‐C₅H(CH₃)₄}₂Fe^IITi^III] or [FeTi(C₉H₁₃)₂(C₆H₄O₂)(C₁₇H₁₄P)]. The angle subtended by the Ti/O/O′ plane, where O and O′ are the donor atoms of the κ²‐carboxy­late group, and the plane of the carboxyl‐substituted ferrocene cyclo­penta­dienyl is 24.93 (6)°.     

Giant Spherical Cluster with I‐C140 Fullerene Topology

We report on an effective cluster expansion of CuBr‐linked aggregates by the increase of the steric bulk of the Cp^R ligand in the pentatopic molecules [Cp^RFe(η⁵‐P₅)]. Using [Cp^BIGFe(η⁵‐P₅)] (Cp^BIG=C₅(4‐nBuC₆H₄)₅), the novel multishell aggregate [{Cp^BIGFe(η^{5:2:1:1:1:1:1}‐P₅)}₁₂(CuBr)₉₂] is obtained. It shows topological analogy to the theoretically predicted I‐C₁₄₀ fullerene molecule. The spherical cluster was comprehensively characterized by various methods in solution and in the solid state.     

Synthese,Struktur und Reaktivität von η3‐1,2‐Diphosphaallylkomplexen sowie von [{(η5‐C5H5)(CO)2W–Co(CO)3}{μ‐AsCH(SiMe3)2}(μ‐CO)]

Syntheses, Structure and Reactivity of η³‐1,2‐Diphosphaallyl Complexes and [{(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃}{μ‐AsCH(SiMe₃)₂}(μ‐CO)] Reaction of ClP=C(SiMe₂iPr)₂ ( 3 ) with Na[Mo(CO)₃(η⁵‐C₅H₅)] afforded the phosphavinylidene complex [(η⁵‐C₅H₅)(CO)₂Mo=P=C(SiMe₂iPr)₂] ( 4 ) which in situ was converted into the η¹‐1,2‐diphosphaallyl complex [η⁵‐(C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₂iPr)₂] ( 6 ) by treatment with the phosphaalkene tBuP=C(NMe₂)₂. The chloroarsanyl complexes [(η⁵‐C₅H₅)(CO)₃M–As(Cl)CH(SiMe₃)₂] [where M = Mo ( 9 ); M = W ( 10 )] resulted from the reaction of Na[M(CO)₃(η⁵‐C₅H₅)] (M = Mo, W) with Cl₂AsCH(SiMe₃)₂. The tungsten derivative 10 and Na[Co(CO)₄] underwent reaction to give the dinuclear μ‐arsinidene complex [(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃{μ‐AsCH(SiMe₃)₂}(μ‐CO)] ( 11 ). Treatment of [(η⁵‐C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₃)₂}] ( 1 ) with an equimolar amount of ethereal HBF₄ gave rise to a 85/15 mixture of the saline complexes [(η⁵‐C₅H₅)(CO)₂Mo{η²‐tBu(H)P–P(F)CH(SiMe₃)₂}]BF₄ ( 18 ) and [Cp(CO)₂Mo{F₂PCH(SiMe₃)₂}(tBuPH₂)]BF₄ ( 19 ) by HF‐addition to the PC bond of the η³‐diphosphaallyl ligand and subsequent protonation ( 18 ) and/or scission of the PP bond by the acid ( 19 ). Consistently 19 was the sole product when 1 was allowed to react with an excess of ethereal HBF₄. The products 6 , 9 , 10 , 11 , 18 and 19 were characterized by means of spectroscopy (IR, ¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR, MS). Moreover, the molecular structures of 6 , 11 and 18 were determined by X‐ray diffraction analysis.     

Dynamic Permutational Isomerism in a closo‐Cluster

Permutational isomers of trigonal bipyramidal [W₂RhIr₂(CO)₉(η⁵‐C₅H₅)₂(η⁵‐C₅HMe₄)] result from competitive capping of either a W₂Ir or a WIr₂ face of the tetrahedral cluster [W₂Ir₂(CO)₁₀(η⁵‐C₅H₅)₂] from its reaction with [Rh(CO)₂(η⁵‐C₅HMe₄)]. The permutational isomers slowly interconvert in solution by a cluster metal vertex exchange that is proposed to proceed by Rh?Ir and Rh?W bond cleavage and reformation, and via the intermediacy of an edge‐bridged tetrahedral transition state. The permutational isomers display differing chemical and physical properties: replacement of CO by PPh₃ occurs at one permutational isomer only, while the isomers display distinct optical power limiting behavior.     

Organo‐Palladium(II)‐Verbindungen mit PdC4‐Koordination: Phenylethinyl‐ und Methylphenylethinylkomplexe

Tetrakis(p‐tolyl)oxalamidinato‐bis[acetylacetonatopalladium(II)] ([Pd₂(acac)₂(oxam)]) reacted with Li–C≡C–C₆H₅ in THF with formation of [Pd(C≡C–C₆H₅)₄Li₂(thf)₄] ( 1a ). Reaction of [Pd₂(acac)₂(oxam)] with a mixture of 6 equiv. Li–C≡C–C₆H₅ and 2 equiv. LiCH₃ resulted in the formation of [Pd(CH₃)(C≡C–C₆H₅)₃Li₂(thf)₄] ( 2 ), and the dimeric complex [Pd₂(CH₃)₄(C≡C–C₆H₅)₄Li₄(thf)₆] ( 3 ) was isolated upon reaction of [Pd₂(acac)₂(oxam)] with a mixture of 4 equiv. Li–C≡C–C₆H₅ and 4 equiv. LiCH₃. 1 – 3 are extremely reactive compounds, which were isolated as white needles in good yields (60–90%). They were fully characterized by IR, ¹H‐, ¹³C‐, ⁷Li‐NMR spectroscopy, and by X‐ray crystallography of single crystals. In these compounds Li ions are bonded to the two carbon atoms of the alkinyl ligand. 1a reacted with Pd(PPh₃)₄ in the presence of oxygen to form the already known complexes trans‐[Pd(C≡C–C₆H₅)₂(PPh₃)₂] and [Pd(η²‐O₂)(PPh₃)₂]. In addition, 1a is an active catalyst for the Heck coupling reaction, but less active in the catalytic Sonogashira reaction.     

Pentane and tetra­hydro­furan solvates of trans‐di­chloro­bis­[1,2‐ethane­diyl­bis­(di­phenyl­phos­phine)‐P,P′]­molybdenum(II)

trans‐[MoCl₂(dppe)₂] [dppe is 1,2‐ethane­diyl­bis­(di­phenyl­phos­phine), C₂₆H₂₄P₂] was obtained as a side product from the reaction of trans‐[Mo(dppe)₂(N₂)₂] with Cp*GeCl to give the germyl­yne complex trans‐[Cl(dppe)₂Mo[triple‐bond]Ge(η¹‐Cp*)]. The crystal structures of the hemi­pentane (0.5C₅H₁₂) and di­tetra­hydro­furan (2C₄H₈O) solvates of trans‐[MoCl₂(dppe)₂], (IIIa) and (IIIb), respectively, have been determined.     

Synthese,Struktur und Reaktivität von Tris‐, Bis‐ und Mono(2,4‐dimethylpentadienyl)‐Komplexen des Neodyms,Lanthans und des Yttriums

The tris(2,4‐dimethylpentadienyl) complexes [Ln(η⁵‐Me₂C₅H₅)₃] (Ln = Nd, La, Y) are obtained analytically pure by reaction of the tribromides LnBr₃·nTHF with the potassium compound K(Me₂C₅H₅)(thf)_n in THF in good yields. The structural characterization is carried out by X‐ray crystal structure analysis and NMR‐spectroscopically. The tris complexes can be transformed into the dimeric bis(2,4‐dimethylpentadienyl) complexes [Ln₂(η⁵‐Me₂C₅H₅)₄X₂] (Ln, X: Nd, Cl, Br, I; La, Br, I; Y, Br) by reaction with the trihalides THF solvates in the molar ratio 2:1 in toluene. Structure and bonding conditions are determined for selected compounds by X‐ray crystal structure analysis and NMR‐spectroscopically in general. The dimer‐monomer equilibrium existing in solution was investigated NMR‐spectroscopically in dependence of the donor strength of the solvent and could be established also by preparation of the corresponding monomer neutral ligand complexes [Ln(η⁵‐Me₂C₅H₅)₂X(L)] (Ln, X, L: Nd, Br, py; La, Cl, thf; Br, py; Y, Br, thf). Finally the possibilities for preparation of mono(2,4‐dimethylpentadienyl)lanthanoid(III)‐dibromid complexes are shown and the hexameric structure of the lanthanum complex [La₆(η⁵‐Me₂C₅H₅)₆Br₁₂(thf)₄] is proved by X‐ray crystal structure analysis.     

Syntheses and Characterization of Samarium and Erbium Borohydrido Complexes Supported by N‐Aryliminopyrrole Ligand

Reaction of potassium salt of N‐aryliminopyrrole ligand [2‐(2, 6‐iPr₂C₆H₃N=CH)–C₄H₃NK] ( 1 ) with samarium tris‐boro‐hydride [Sm(BH₄)₃(THF)₃] gave a samarium ate complex [η²‐{2‐(2, 6‐iPr₂C₆H₃N=CH)–C₄H₃N}₃Sm(η¹‐BH₄){K(THF)₆] ( 2 ); whereas similar treatment with erbium borohydride [Er(BH₄)₃(THF)₃] afforded the mono(iminopyrrolyl) complex [η²‐{2‐(2, 6‐iPr₂C₆H₃N=CH)–C₄H₃N}Er(η³‐BH₄)₂(THF)₂] ( 3 ). In the solid‐state structures, the samarium complex 2 shows a rarely observed η¹ and the erbium complex 3 shows a usual η³ coordination mode of the borohydrido ligand.     

Reactions of Organic Azides with Half‐sandwich Complexes of Iridium: Preparation of Mono‐ and Bis(imine) Derivatives

Imine complexes [IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}{P(OR)₃}]BPh₄ ( 1 , 2 ) (Ar = C₆H₅, 4‐CH₃C₆H₄; R = Me, Et) were prepared by allowing chloro complexes [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] to react with benzyl azides ArCH₂N₃. Bis(imine) complexes [Ir(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}₂{P(OR)₃}](BPh₄)₂ ( 3 , 4 ) were also prepared by reacting [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] first with AgOTf and then with benzyl azide. Depending on the experimental conditions, treatment of the dinuclear complex [IrCl₂(η⁵‐C₅Me₅)]₂ with benzyl azide yielded mono‐ [IrCl₂(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}] ( 5 ) and bis‐[IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}₂]BPh₄ ( 6 ) imine derivatives. In contrast, treatment of chloro complexes [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] with phenyl azide C₆H₅N₃ gave amine derivatives [IrCl(η⁵‐C₅Me₅)(C₆H₅NH₂){P(OR)₃}]BPh₄ ( 7 , 8 ). The complexes were characterized spectroscopically (IR, NMR) and by X‐ray crystal structure determination of [IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)C₆H₄‐4‐CH₃}{P(OEt)₃}]BPh₄ ( 2b ).     

η2(π)‐Coordination of a Bis‐Phosphonio‐Benzophospholide Cation: A Novel Complexation Mode for Unsaturated Phosphorus Heterocycles

The bis‐phosphonio‐benzo[c]phospholide tetraphenylborate 4 [BPh₄] reacts with CpCo(C₂H₄)₂ to form a chelate complex [Co(η⁵–Cp)(κ²P,η²(P=C) –4 )][BPh₄] ( 6 [BPh₄]) which was characterized by means of spectroscopic techniques and a single crystal X‐ray diffraction study. The observed η²(π)‐coordination of the benzophospholide moiety in the cation 6 is highly unusual for aromatic phosphorus heterocycles. The structural data suggest a pronounced coordination‐induced localization of π‐electrons in the condensed ring system.     

Dysprosiacarboranes as Organometallic Single‐Molecule Magnets

The dicarbollide ion, nido‐C₂B₉H₁₁^2? is isoelectronic with cyclopentadienyl. Herein, we make dysprosiacarboranes, namely [(C₂B₉H₁₁)₂Ln(THF)₂][Na(THF)₅] (Ln=Dy, 1Dy ) and [(THF)₃(μ‐H)₃Li]₂[{η⁵‐C₆H₄(CH₂)₂C₂B₉H₉}Dy{η²:η⁵‐C₆H₄(CH₂)₂C₂B₉H₉}₂Li] 3Dy and show that dicarbollide ligands impose strong magnetic axiality on the central Dy^III ion. The effective energy barrier (U_eff) for the loss of magnetization can be varied by the substitution pattern on the dicarbollide. This finding is demonstrated by comparing complexes of nido‐C₂B₉H₁₁^2? and nido‐[o‐xylylene‐C₂B₉H₉]^2?, which show a U_eff of 430(5) K and 804(7) K, respectively. The blocking temperature defined by the open hysteresis temperature of 3Dy reaches 6.8 K. Moreover, the linear complex [Dy(C₂B₉H₁₁)₂]^? is predicted to have comparable properties with the linear [Dy(Cp^Me3)₂]⁺ complex. As such, carboranyl ligands and their derivatives may provide a new type of organometallic ligand for high‐performance single‐molecule magnets.