Self‐assembly of p‐Aminothiophenol on Gold Surface: Application for Impedimetric and Potentiometric Sensing of Cobalt (II) Ions – A Comparative Study

Cobalt, despite an essential biological element, imposes threat to humans when exposed to high concentration or even to low concentration for long term which demands the development of highly sensitive and selective analytical methods for its trace analysis. In the present work, self‐assembly of p‐aminothiophenol (p‐ATP) on gold surface (Au?ATP SAM) was carried out and for the first time, applied as a platform for impedimetric and potentiometric sensing of Co²⁺. Au?ATP SAM was characterized using electrochemical techniques: cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), in the presence of two redox probes: [Fe(CN)₆]^3?/4? and [Ru(NH₃)₆]^2+/3+ to evaluate associated passivating behaviour. Au?ATP SAM completely blocked [Fe(CN)₆]^3?/4? as compared to [Ru(NH₃)₆]^2+/3+ which may be attributed to inner‐sphere and outer‐sphere ET mechanisms, respectively. Au?ATP SAM was found to exhibit excellent sensitivity towards Co²⁺ in a wider concentration range from 1.0×10^?12 M to 1.0×10^?5 M (r²=0.963) at pH 5.5 with a detection limit of 6.0×10^?13 M and superior selectivity. Further, carbon paste electrode (CPE) was prepared by incorporating p‐ATP bound gold nanoparticles and explored for potentiometric sensing of Co²⁺ which exhibited Nernstian slope of 29.2±0.2 mV/dec in linear concentration range of 1.0×10^?6 M–1.0×10^?1 M (r²=0.971) with a detection limit of 8.0×10^?7 M. The proposed sensors were successfully applied for estimation of Co²⁺ content in water samples.     

Solution phase electron transfer versus bridge mediated electron transfer across carboxylic acid terminated thiols

Self-assembled monolayers (SAMs) of thiols with carboxylic acid terminal groups were formed on gold substrates. The electron transfer characteristics of redox species on the above SAM-modified electrodes were studied in acid and neutral media with the help of voltammetry under two different conditions: (1) solution phase electron transfer and (2) bridge mediated electron transfer. Two redox systems, viz., [Fe(CN)₆]^4-/3− and Ru[(NH₃)₆]^2+/3+ were chosen for the solution phase study. Investigations of bridge mediated electron transfer were carried out by functionalising the SAM with redox moieties and then studying their redox behaviour. For this study, ferrocene carboxylic acid and 1,4-diamino anthraquinone were used and they were linked to carboxylic acid terminated thiols by covalent linkage. The voltammetric results with mercaptoundecanoic acid SAM demonstrate the difference in behaviour between solution phase and bridge mediated electron transfer processes.     

DNA-mediated charge transport by minor groove-binding polyamide

A novel polyamide-modified electrode was fabricated successfully by surface synthesis. The DNA-mediated charge transport by minor groove-binding polyamide was observed for the first time with a [Ru(NH₃)₆]^2+/3+ probe. Two control experiments on HSC₁₁H₂₂NH₂ SAM/Au electrode, with and without DNA adsorption, confirmed that polyamide–DNA complex was a medium of charge transport. Four different DNA sequences were employed to investigate the effect of the charge transport of the polyamide–DNA complex in the minor groove. The peak current and a positive shift of peak potential were enhanced with the affinity increase between polyamide and DNA sequences. The experimental result offers a powerful tool for exquisite recognition of different sequences of base-pairs in double-stranded DNA.     

Electron transfer across the interface gold/self-assembled organic monolayer. Comparison of single- and two-component systems

Single- and two-component self-assembled organic monolayers (SAM) formed of HS-C₁₀H₂₀-COOH and the HS-C₁₀H₂₀-COOH + HS-C₆H₁₂-OH mixture and applied on gold electrodes of different shapes and roughness are studied. The resulting monolayers are characterized in 1 M NaNO₃ solutions by the methods of electrochemical impedance spectroscopy in the frequency range from 1 Hz to 100 kHz and cyclic voltammetry in the potential range from 0 to −0.4 V (SCE). Using these method, the behavior of modified single-crystal and polycrystalline gold electrodes in electrolyte solutions of different acidity is assessed and the standard rate constants for the Ru[(NH₃)₆]^3+/2+ redox reaction are determined. The SAM film formed from the ethanol solution of the HS-C₁₀H₂₀-COOH + HS-C₆H₁₂-OH mixture (0.025 M) on the Au(210) singlecrystal face lowers down the rate of the heterogeneous Ru[(NH₃)₆]^3+/2+ reaction from 1.5 to 4.02 × 10⁻⁴ cm/s in the electrolyte solution with pH from 2. In solutions with higher pH, the rate constant is higher by almost an order of magnitude (2.74 × 10⁻³ cm/s). The distribution of micropores in SAM films is studied within the framework of a model of micro-array electrodes. The results of studies are compared with the literature data on the gold electrode in solutions of inactive electrolytes in the absence and in the presence of SAM films formed by alkylmercaptans with equal chain lengths.     

Electrochemical rectification at electrode surface modified with poly (acrylic acid) and decane thiol

Gold surface modified with a two-component system consisting of poly (acrylic acid) (PAA) by electropolymerizing acrylic acid (AA) and decane thiol (DT), further functionalized with ferrocene monocarboxylic acid (FMC) through covalent linkage, was used to demonstrate mediated electron transfer resulting in a unidirectional flow of current. The electrode surface was modified using two different configurations. In Configuration 1 (Config. 1), electrode surface modified with FMC showed rectification behavior when contacted with a solution containing methylene blue (MB). In Configuration 2, redox-active bilayer was constructed using polyvinyl pyrollidone (PVP) and hexaamineruthernium (II) chloride [Ru(NH₃)₆]²⁺ showed rectification characteristics. The continuous rectification property of the redox-active bilayer is achieved by releasing the trapped [Ru(NH₃)₆]³⁺ in the outer layer using a reductant (ascorbic acid). Spectroelectrochemical measurements were made to study the reduction property of the ascorbic acid. Atomic force microscopic images and impedance measurements were also made on the modified electrode surfaces to explore the compactness of the first layer (PAA and PAA/DT).     

Reactions of Beryllium Halides in Liquid Ammonia: The Tetraammineberyllium Cation [Be(NH3)4]2+, its Hydrolysis Products,and the Action of Be2+ as a Fluoride‐Ion Acceptor

The first structural characterization of the text‐book tetraammineberyllium(II) cation [Be(NH₃)₄]²⁺, obtained in the compounds [Be(NH₃)₄]₂Cl₄ ? 17NH₃ and [Be(NH₃)₄]Cl₂, is reported. Through NMR spectroscopic and quantum chemical studies, its hydrolysis products in liquid ammonia were identified. These are the dinuclear [Be₂(μ‐OH)(NH₃)₆]³⁺ and the cyclic [Be₂(μ‐OH)₂(NH₃)₄]²⁺ and [Be₃(μ‐OH)₃(NH₃)₆]³⁺ cations. The latter species was isolated as the compound [Be₃(μ‐OH)₃(NH₃)₆]Cl₃ ? 7NH₃. NMR analysis of solutions of BeF₂ in liquid ammonia showed that the [BeF₂(NH₃)₂] molecule was the only dissolved species. It acts as a strong fluoride‐ion acceptor and forms the [BeF₃(NH₃)]^? anion in the compound [N₂H₇][BeF₃(NH₃)]. The compounds presented herein were characterized by single‐crystal X‐ray structure analysis, ⁹Be, ¹⁷O, and ¹⁹F NMR, IR, and Raman spectroscopy, deuteration studies, and quantum chemical calculations. The extension of beryllium chemistry to the ammine system shows similarities but also decisive differences to the aquo system.     

The solid state reaction between hexaamminechromium(III) complexes and L-α-alanine

The solid reaction between [Cr(NH₃)₆]X₃(X^? = Cl, I, SCN and NO₃) and L-α-alanine was studied under continuous rise in temperature and isothermal heating. Under continuous rise in temperature, the main products were [Cr(NCS)₃-(NH₃)₃] (X^? = NCS) and [Cr(L-ala)₃] (X^? = NO₃), when [Cr(NH₃)₆]Cl₃ and [Cr(NH₃)₆]I₃ as starting complexes were used; in both cases only the decomposition proceeds. Under isothermal heating at 150°C the main products were [CrCl(NH₃)₅]-Cl₂ (X^? = Cl), [Cr(NH₃)₆]I₂ (X^? = I), [Cr(NCS)₃(NH₃)₃] (X^? = SCN) and [Cr(L-ala)₃] (X^? = NO₃). In those matrix reactions, the ease of anion coordination was: SCN^? > Cl^? > I^? > alanine. For the synthesis of tris(alaninato)chromium(III) complex the most desirable starting complex was [Cr(NH₃)₆](NO₃)₃.The solid state reaction between [Cr(en)₃]X₃ type complexes and NH₄X (X^? = F, Cl, Br, I and SCN), KX (X^? = Cl, Br and I), and NaSCN have been reported by Wendlandt and Stembridge¹. They reported that the reaction product in most cases, was cis-[Cr(en)₂Y₂]X, where Y and X are the same or different anions, depending upon the matrix material employed and the thermal matrix method appears to be a useful new route for the synthesis of bis(ethylendiamine(chromium(III) complexes.In the previous paper², the solid state reaction between [Cr(NH₃)₆](NO₃)₃ and L-amino acids has been utilized in the preparation of tris(amino acidato)chromium(III) complexes. The preparation of [Cr(L-ala)₃] by the solid state reaction between [Cr(NH₃)₆](NO₃)₃ and L-alanine have been reported. No studies on the effect of the counter-ion have been reported.In this paper, various hexaamminechromium(III) complexes, [Cr(NH₃)₆]X₃ (X^? = Cl, I, SCN and NO₃), were heated with L-α-alanine under continuous rise in temperature and under isothermal heating at 150°C for studies on the ease of anion coordination. It will seen that the anion which replaces the ammonia in the hexaamminechromium(III) complex comes from either the alanine or counter-ion.     

Extraktion von Lanthaniden aus Rhodanidlösungen mit Aliquat-336-rhodanid in Benzol

The extraction of Pr, Eu and Yb from a solution of NH₄SCN at pH<2 with a solution of Aliquat-336—SCN in benzene has been investigated. The formation of the following kinds of extractable complexes in dependence of NH₄SCN and H₂SO₄ was established: [Ln(SCN)₄]^–1, [Ln(SCN)₅]^–2, [Ln(SCN)₆]^–3.

---

---

Mit 6 Abbildungen     

Studies on oxopentafluorovanadates(IV)

A large number of new salts of the ion [VOF₅]^3? have been obtained by cyrstallising a solution of vanadyl sulphate containing the respective cations as their fluorides. The cations are Rb⁺, [Co(NH₃)₆]³⁺, [Co(en)₃]³⁺ and protonated bases, viz., guanidine, 1,2-diamino benzene, ethylene diamine and hydrazine. The molecular conductances of the rubidium salt indicate the presence of uni-trivalent electrolyte. The magnetic moments of the salts are almost equal to the spin-only value. The i.r. spectra of the salts give strong absorption bands between 910 to 965 cm^-1 showing the presence of terminal V=O group. The [VOF₅]^3? ion breaks up completely on passing a salt solution through a column of cation exchange resin.     

Influence of the chloride counterion on the redox reactivity of tetraammineplatinum(II) cation with octacyanotungstate(V) anion: Crystal structure of [Pt(NH3)4]2[W(CN)8]

The redox reaction between [Pt(NH₃)₄]²⁺ and [W(CN)₈]³⁻ in the presence of Cl⁻ anions in aqueous solution affords single crystals of [Pt^II(NH₃)₄]₂[W^IV(CN)₈] and [Pt^IV(NH₃)₄Cl₂]Cl₂. Trapped cyano ligands of [W(CN)₈]⁴⁻ rectangular antiprisms of D₂ point symmetry between parallel Pt(II) square planes show that the inner-sphere redox pathway is prohibited. The presence of Cl⁻ counterions enables the formation of [Pt(NH₃)₄Cl₂]Cl₂ as the product of the rare outer-sphere pathway of the oxidation of Pt(II) by [W(CN)₈]³⁻.     

UF6 and UF4 in Liquid Ammonia: [UF7(NH3)]3− and [UF4(NH3)4]

From the reaction of uranium hexafluoride UF₆ with dry liquid ammonia, the [UF₇(NH₃)]^3? anion and the [UF₄(NH₃)₄] molecule were isolated and identified for the first time. They are found in signal‐green crystals of trisammonium monoammine heptafluorouranate(IV) ammonia (1:1; [NH₄]₃[UF₇(NH₃)] ? NH₃) and emerald‐green crystals of tetraammine tetrafluorouranium(IV) ammonia (1:1; [UF₄(NH₃)₄] ? NH₃). [NH₄]₃[UF₇(NH₃)] ? NH₃ features discrete [UF₇(NH₃)]^3? anions with a coordination geometry similar to a bicapped trigonal prism, hitherto unknown for U^IV compounds. The emerald‐green [UF₄(NH₃)₄] ? NH₃ contains discrete tetraammine tetrafluorouranium(IV) [UF₄(NH₃)₄] molecules. [UF₄(NH₃)₄] ? NH₃ is not stable at room temperature and forms pastel‐green [UF₄(NH₃)₄] as a powder that is surprisingly stable up to 147 °C. The compounds are the first structurally characterized ammonia complexes of uranium fluorides.     

Electrophilic aromatic substitution under chemical ionization conditions. Methylamine and ammonia as reagent gases

For compounds C₆H₅X (X?Cl, Br, I) under chemical ionization conditions, methylamine causes ipso substitution of X by [NH₂CH₃]⁺ and by [NH₂]⁺˙. C₆H₅F is less reactive; it gives some [C₆H₅NH₂]⁺˙. Nitrobenzene gives an adduct ion [M+CH₃NH₃]⁺, a reduction product ion [C₆H₅NO₂]⁺˙, and an ion at m/z93, probably a substitution product [C₆H₅NH₂]⁺˙, but no [C₆H₅NH₂CH₃]⁺. It is also shown that the ion m/z94, formed from nitrobenzene with ammonia as reagent gas, is a substitution product rather than a reduction product ion. Carbonyl compounds C₆H₅. CO. X give adduct ions and some substitution, mainly [C₆H₅NH₂]⁺˙.     

离子强度对DNA媒介电荷转移的影响——基于Debye-Hückel 理论的实验结果分析

用电化学的方法研究了溶液离子强度对DNA媒介电荷转移的影响, 观察到[Ru(NH₃)₆]³⁺的还原峰电势随支持电解质的浓度增加向负方向移动. 分析发现微分脉冲伏安法(DPV)的峰电势与溶液离子强度间在一定范围内存在线性关系, 以式电势(E⁰')作为“桥梁”, 用Debye-Hückel理论给予了解释. 在高离子强度下, 峰电势对线性关系的偏移是由于超过了Debye-Hückel理论的适用范围, 而无强电解质存在时, DNA自身堆积的强负电荷对DNA媒介电荷转移起了推动作用.     

Synthese,Struktur und Thermolyse von NH4[Re3Br10]

Synthesis, Structure and Thermolysis of NH₄[Re₃Br₁₀] NH₄[Re₃Br₁₀] crystallizes as dark brown single crystals upon slow cooling of a hot, saturated hydrobromic-acid solution of [Re₃Br₉(H₂O)₂] after the addition of NH₄Br. The crystal structure (monoclinic, C2/m (Nr. 12); Z = 4; a = 1461.6(7), b = 1 085.6(4), c = 1030.3(7) pm, β = 92.63(4)°, V_m = 245.9(4)cm³/mol; R = 0.097, R_w = 0.043) contains [Re₃Br₁₂]^? units that share two common edges. These chains run along [010] and are held together by NH₄⁺ ions. Each NH₄⁺ is surrounded by eight Br^? from four different chains. The first step of the thermal decomposition at 290°C is the disproportionation to ReBr₃ (ReCl₃ type), rhenium metal and (NH₄)₂[ReBr₆]. Secondly, the internal reduction of (NH₄)₂[ReBr₆] at 390°C to rhenium metal takes place.     

Convenient Access to α‐Fluorinated Alkylammonium Salts

A series of novel α‐fluoroalkyl ammonium salts was obtained from the corresponding cyano compounds or nitriles by reaction with anhydrous HF. Room‐temperature stable trifluoromethyl ammonium salts were obtained in quantitative yield in a one‐step reaction at ambient temperature from the commercially available starting materials BrCN or ClCN. The novel cations [CF₃CF₂NH₃]⁺, [HCF₂CF₂NH₃]⁺, and [(NH₃CF₂)₂]²⁺ were obtained from CF₃CN, HCF₂CN, and (CN)₂, respectively, and anhydrous HF. The aforementioned fluorinated ammonium cations were isolated as room temperature stable [AsF₆]^? and/or [SbF₆]^? salts, and characterized by multi‐nuclear NMR and vibrational spectroscopy. The salts [HCF₂NH₃][AsF₆] and [CF₃NH₃][Sb₂F₁₁] were characterized by their X‐ray crystal structure.     

The Protonation of Acetamide and Thioacetamide in Super­acidic Solutions: Crystal Structures of [H3CC(OH)NH2]+AsF6– and [H3CC(SH)NH2]+AsF6–

Acetamide and thioacetamide react with the superacid solutions HF/MF₅ (M = As, Sb) under formation of the corresponding salts [H₃CC(OH)NH₂]⁺MF₆^– and [H₃CC(SH)NH₂]⁺MF₆^– (M = As, Sb), respectively. The reaction of DF/AsF₅ with acetamide and thioacetamide lead to the corresponding deuterated salts [H₃CC(OD)ND₂]⁺AsF₆^– and [H₃CC(SD)ND₂]⁺AsF₆^–, respectively_. The salts are characterized by vibrational and NMR spectroscopy, and in the case of [H₃CC(OH)NH₂]⁺AsF₆^– and [H₃CC(SH)NH₂]⁺AsF₆^– also by single‐crystal X‐ray analyses. The [H₃CC(OH)NH₂]⁺AsF₆^– ( 1 ) salt crystallizes in the triclinic space group P$\bar{1}$ with two formula units per unit cell, and the [H₃CC(SH)NH₂]⁺AsF₆^– ( 2 ) salt crystallizes in the monoclinic space group P2₁/c with four formula units per unit cell. In both crystal structures three‐dimensional networks are observed which are formed by intra‐ and intermolecular N–H ··· F and O–H ··· F or S–H ··· F hydrogen bonds, respectively. For the vibrational analyses, quantum chemically calculated spectra of the cations [H₃CC(OH)NH₂ · 3HF]⁺ and [H₃CC(SH)NH₂ · 2HF]⁺ are considered.     

Redox Properties of Ferricyanide Ion on Layer‐by‐Layer Thin Film‐Coated Gold Electrodes; Effects of Type of Polycationic Components in the Film

The surface of a gold (Au) electrode was coated with layer‐by‐layer (LbL) thin films composed of poly(vinyl sulfate) (PVS) and different type of poly(amine)s including poly(allylamine) (PAH), poly(ethyleneimine) (PEI) and poly(diallyldimethylammonium chloride) (PDDA) and redox properties of ferricyanide ion ([Fe(CN)₆]^3?) on the LbL film‐coated Au electrodes were studied. The LbL film‐coated electrodes exhibited redox response to [Fe(CN)₆]^3? ion when the outermost surface of the LbL film was covered with the cationic poly(amine)s while virtually no response was observed on the LbL film‐coated electrodes whose outermost surface was covered with PVS due to an electrostatic repulsion between [Fe(CN)₆]^3? ion and the negatively‐charged PVS layer. The redox properties of [Fe(CN)₆]^3? ion on the LbL film‐coated electrodes significantly depended on the type of polycationic materials in the LbL film. The LbL film‐coated electrodes which had been immersed in the [Fe(CN)₆]^3? solution for 15 min exhibited redox response even in a [Fe(CN)₆]^3? ion‐free buffer solution, suggesting that [Fe(CN)₆]^3? ion is confined in the films. In the buffer solution, redox peaks were observed between +0.1 and 0.4 V depending on the type of polycations in the film. Thus, [Fe(CN)₆]^3? ion can be confined in the film and the redox potential is polycation‐dependent.     

Effect of alkali metals and metal-ammonia complexes on electroosmosis,effective field strength,and resolution in the separation of diuretics by CZE

The counter ion in CZE separation systems affects resolution, effective field strength and electroosmosis. Alkali metals (lithium, sodium, potassium, and cesium), the ammonium ion, and several complexes of metals with ammonia ([Ag(NH₃)₂]⁺, [Cu(NH₃)₄]²⁺, [Zn(NH₃)₄]²⁺, [Cd(NH₃)₄]²⁺, [Ni(NH₃)₆]²⁺, and [Co(NH₃)₆]²⁺) have been studied for their effect on the separation of diuretics. With the alkali metals the electroosmotic flow velocity decreased and the effective field strength and resolution increased as the hydrated radius of the alkali metal decreased. All the metal-ammonia complexes except that with silver greatly reduced the electroosmotic flow velocity (V_eo) and had only a slight effect on the effective field strength (E_eff). Because these complexes had a negligible effect on the ionic strength of the buffer, they enabled high separating power to be maintained during the separation, and hence the use of more energy in the separation system. This yielded better resolution of the compounds, but the analysis time was then compromised. A simultaneous reduction in capillary length and V_eo while maintaining the high voltage enabled increased resolution without an increase in analysis time. The ability to control V_eo by adding small concentrations (< 100 μM ) of metal complexes to the buffer solution makes it possible to adjust the analysis time and capillary length independently while employing high separation power.     

Zwei Mercuri‐Ammin‐Komplexe: [Hg(NH3)2][HgCl3]2 und [Hg(NH3)4](ClO4)2

Two Mercuric Ammoniates: [Hg(NH₃)₂][HgCl₃]₂ and [Hg(NH₃)₄](ClO₄)₂ [Hg(NH₃)₂][HgCl₃]₂ ( 1 ) is obtained by saturating an equimolar solution of HgCl₂ and NH₄Cl with Hg(NH₂)Cl at 75 °C. 1 crystallizes in the orthorhombic space group Pmna with a = 591.9(1) pm, b = 800.3(1) pm, c = 1243.3(4) pm, Z = 2. The structure consists of linear cations [Hg(NH₃)₂]²⁺ and T‐shaped anions [HgCl₃]^—. The coordination sphere of mercury is ?effectively”? completed to compressed hexagonal bipyramids and distorted octahedra, respectively. Single crystals of [Hg(NH₃)₄](ClO₄)₂ ( 2 ) are obtained by passing gaseous ammonia through a solution of mercuric perchlorate, while the solution was cooled to temperatures below 10 °C. 2 crystallizes in the monoclinic space group P2₁/c with a = 791.52(9) pm, b = 1084.3(2) pm, c = 1566.4(2) pm, β = 120.352(1)°, Z = 4. The structure consists of compressed [Hg(NH₃)₄]²⁺ tetrahedra and perchlorate anions. The packing of the heavy atoms Hg and Cl is analogous to the baddeleyite (α‐ZrO₂) type of structure.     

Nitrosylation of Hexafluoridotechnetate(IV)

Potassium hexafluoridotechnetate(IV), K₂[TcF₆], slowly reacts in aqueous solution with acetohydroxamic acid with formation of the ammine nitrosyltechnetium(I) complex [Tc(NO)(NH₃)₄F]⁺. The product crystallizes as mixed TcF₆^2–/HF₂^– salt of the composition [Tc(NO)(NH₃)₄F]₄[TcF₆][HF₂]₂. [Tc(NO)(NH₃)₄F]⁺ represents the first nitrosyltechnetium complex with a fluorido ligand in its coordination sphere. The Tc–F bonds in two crystallographically independent species are 1.987(2) and 2.034(2) Å, respectively. This is slightly longer than in the [TcF₆]^2– counterion.