Influence of Capping Ligands on the Self—organization of Gold Nanoparticles into Superlattices from CTAB Reverse Micelles

Gold nanoparticles with size 3-10nm (diameter) were prepared by the reduction of HAuCl4 in a CTAB/octane 1-butanol/H2O reverse micelle system using NaBH4 as the reducing agent.The as-formed gold nanoparticle colloid was characterized by UV/vis absorption spectrum and transmission electron microscopy(TEM).Various capping ligands,such as alkylthiols with different chain length and shape,trioctylphosphine(TOP),and pyridine are used to passivate the gold nanoparticles for the purpose of self-organization into superstructures.It is shown that the ligands have a great influence on the selforganization of gold nanoparticles into superlattices,and dodecanethiol C12H25SH is confirmed to be the best ligand for the self-organization.Self-organization of C12H25SH-capped gold nanoparticles into 1D,2D and 3D supperlattices has been observed on the carbon-coated copper grid by TEM without using any selective precipitation process.     

Comparative study of self‐assembly of a range of monofunctional aliphatic molecules on magnetron‐sputtered aluminium

The adsorption of a range of organic molecules from toluene onto the oxidized surface of magnetron‐sputtered aluminium metal is studied using sessile drop water contact angle measurements. Molecules with different head group functionalities and various chain lengths are considered, including alkyl carboxylic acids, alkyl phosphonic acids, alkyl amines, alkyl trimethoxysilanes, alkyl trichlorosilanes and epoxy alkanes. Alkyl phosphonic and carboxylic acids are identified as readily forming the most well‐packed monolayers on the aluminium surface, whereas the others adsorb less well and the chlorosilanes polymerize as a result of combination with moisture to form a thick deposit. The high‐adsorption‐density monolayers of alkyl phosphonic and carboxylic acids were studied using polarization modulation infrared reflection–absorption spectroscopy (PM‐IRRAS) and x‐ray photoelectron spectroscopy (XPS): PM‐IRRAS reveals relatively poorer ordering of the C₁₀ alkyl carboxylic acid monolayer compared with that formed from the phosphonic acid, and XPS data suggest that this is likely to relate to a lower ability to displace preadsorbed volatile organic compounds. Copyright © 2004 John Wiley & Sons, Ltd.     

Molecular adsorption on ZnO(1010) single-crystal surfaces: morphology and charge transfer

While ZnO has excellent electrical properties, it has not been widely used for dye-sensitized solar cells, in part because ZnO is chemically less stable than widely used TiO(2). The functional groups typically used for surface passivation and for attaching dye molecules either bind weakly or etch the ZnO surface. We have compared the formation of molecular layers from alkane molecules with terminal carboxylic acid, alcohol, amine, phosphonic acid, or thiol functional groups on single-crystal zinc oxide (1010) surfaces. Atomic force microscopy (AFM) images show that alkyl carboxylic acids etch the surface whereas alkyl amine and alkyl alcohols bind only weakly on the ZnO(1010) surface. Phosphonic acid-terminated molecules were found to bind to the surface in a heterogeneous manner, forming clusters of molecules. Alkanethiols were found to bind to the surface, forming highly uniform monolayers with some etching detected after long immersion times in an alkanethiol solution. Monolayers of hexadecylphosphonic acid and octadecanethiol were further analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. AFM scratching shows that thiols were bound strongly to the ZnO surface, suggesting the formation of strong Zn-S covalent bonds. Surprisingly, the tridentate phosphonic acids adhered much more weakly than the monodentate thiol. The influence of organic grafting on the charge transfer to ZnO was studied by time-resolved surface photovoltage measurements and electrochemical impedance measurements. Our results show that the grafting of thiols to ZnO leads to robust surfaces and reduces the surface band bending due to midgap surface states.     

Degradation of crosslinked unsaturated polyesters in sub-critical water

The degradation of unsaturated polyesters crosslinked with styrene was performed in sub-critical water (SCW) in the absence and presence of organic additives. The unsaturated polyesters were de-crosslinked by hydrolysis of ester chains to form polystyrene derivatives on SCW treatment at 300 °C. With an increase in treating time, carboxylic acid groups in the polystyrene derivatives were turned into carboxylic anhydride groups in SCW. The de-crosslinking rate was much enhanced on SCW treatment in the presence of hydroxy compounds with a long alkyl chain and alkylamines, while carboxylic acids, benzenesulfonate salts, and quaternary ammonium salts were ineffective even though they had a long alkyl chain. The degree of de-crosslinking was reduced in the presence of diamines and amino acids because re-crosslinking at both ends of the additive molecules proceeded.     

Cross‐Coupling of Alkyl Redox‐Active Esters with Benzophenone Imines: Tandem Photoredox and Copper Catalysis

Alkyl amines are an important class of organic compounds in medicinal and materials chemistry. Until now very have been very few methods for the synthesis of alkyl amines by metal‐catalyzed cross‐coupling of alkyl electrophiles with nitrogen nucleophiles. Described here is an approach to employ tandem photoredox and copper catalysis to enable the cross‐coupling of alkyl N‐hydroxyphthalimide esters, readily derived from alkyl carboxylic acids, with benzophenone‐derived imines. Hydrolysis of the coupling products furnish alkylated primary amines. Primary, secondary, and tertiary alkyl groups can be transferred, and the coupling tolerates a diverse set of functional groups. The method allows rapid functionalization of natural products and drugs, and can be used to expedite syntheses of pharmaceuticals from readily available chemical feedstocks.     

Photosensitized Intermolecular Carboimination of Alkenes through the Persistent Radical Effect

An intermolecular, two‐component vicinal carboimination of alkenes has been accomplished by energy transfer catalysis. Oxime esters of alkyl carboxylic acids were used as bifunctional reagents to generate both alkyl and iminyl radicals. Subsequently, addition of the alkyl radical to an alkene generates a transient radical for selective radical–radical cross‐coupling with the persistent iminyl radical. Furthermore, this process provides direct access to aliphatic primary amines and α‐amino acids by simple hydrolysis.     

Formation of low-symmetric 2D superlattices of gold nanoparticles through surface modification by acid-base interaction

In the present work, a novel method was developed for the fabrication of 2D superlattices with different symmetries. Same-surface amino-functionalized Au nanoparticles as building blocks were self-assembled to form different 2D superlattices using surface modification with organic acids. The 2D superlattices of quasi-honeycomb and square structures were obtained by neutralizing amino-functionalized Au nanoparticles with 1,3,5-tribenzenecarboxylic acid and acetic acid, respectively. These results strongly suggest that the different types of 2D or 3D superlattices can be constructed by simple addition of proper acid to nanoparticles functionalized with amino groups. This method will allow us to obtain various desired metal superlattices without fully synthesizing the ligands.     

Direct Acyl Substitution of Carboxylic Acids: A Chemoselective O‐ to N‐Acyl Migration in the Traceless Staudinger Ligation

A chlorophosphite‐modified, Staudinger‐like acylation of azides involving a highly chemoselective, direct nucleophilic acyl substitution of carboxylic acids is described. The reaction provides the corresponding amides with analytical purity in 32–97 % yield after a simple aqueous workup without the need for a pre‐activation step. The use of chlorophosphites as dual carboxylic acid–azide activating agents enables the formation of acyl C? N bonds in the presence of a wide range of nucleophilic and electrophilic functional groups, including amines, alcohols, amides, aldehydes, and ketones. The coupling of carboxylic acids and azides for the formation of alkyl amides, sulfonyl amides, lactams, and dipeptides is described.     

Silane-based poly(ethylene glycol) as a primer for surface modification of nonhydrolytically synthesized nanoparticles using the Stöber method

This paper describes the use of methoxy-poly(ethylene glycol) silane (MPEG-sil) as a linker molecule for the synthesis of silica-coated nanoparticles by the St?ber method. While short alkane chain-based siloxanes including (acryloxypropyl)trimethoxysilane and 3-methacryloxypropyl-trimethoxysilane are popular molecules used in surface modification, they are not efficient for the silica coating of nanoparticles synthesized from organic solvents containing long carbon chain carboxylic acids or amines as capping agents. Here, we report the utilization of MPEG-sil to bridge this gap. Our approach is based on a two-phase system, in which ligand exchange takes place in a hydrophobic environment and the surface modification with silica is conducted in an ethanol-water mixture. Our results show that this two-phased approach was effective to coat monodisperse Fe2O3 nanoparticles capped with oleic acid and Ag nanoparticles capped with oleylamine with uniform SiO2 shells. The process was also demonstrated for double-shell nanostructures to produce SiO2-coated Pt@Fe2O3 core-shell nanoparticles. The results described in this work represent a new approach for the surface modification with silica coating of monodisperse nanoparticles synthesized from nonhydrolytic solutions and can potentially have a broad ramification in the development of water-dispersible nanoparticles for biological applications.     

Effect of surface modification with various thiol compounds on colloidal stability of gold nanoparticles

Gold nanoparticles (AuNPs) are attractive materials due to their special optical and electronic properties. However, they tend to aggregate particularly in the presence of thiol‐containing compounds. In this study, to investigate the effect of surface conjugation with thiol‐containing compounds on colloidal stability, thiol compounds with various structures as modifying agents were used. To this end, AuNPs were synthesized and stabilized by trisodium citrate in aqueous solution, and then modified with thiol‐containing compounds, namely cysteamine hydrochloride (MEA, containing primary amine groups), 2‐mercaptoethanol (BME, containing hydroxyl groups), 1‐dodecanthiol (LCA, containing long‐chain alkyl groups) and thioglycolic acid (TGA, containing carboxylic acid groups). We studied the effect of thiol ligands on solution stability of colloidal AuNPs and on the formation of aggregates originating from the modification process using UV–visible spectroscopy, dynamic light scattering, field emission scanning electron microscopy and transmission electron microscopy. Results showed that surface modification with MEA, BME and LCA led to the formation of aggregates. However, conjugation with TGA showed a concentration‐dependent behaviour: surface modification with low concentration resulted in the formation of aggregates whereas that with high concentration of TGA did not disturb the colloidal stability of AuNPs. Finally, the effect of surface modification on temperature increase of solutions originating from infrared light irradiation was studied, where the temperature increase depends on the surface‐modifying compound.     

Target‐Specific Capture of Environmentally Relevant Gaseous Aldehydes and Carboxylic Acids with Functional Nanoparticles

Aldehyde and carboxylic acid volatile organic compounds (VOCs) present significant environmental concern due to their prevalence in the atmosphere. We developed biodegradable functional nanoparticles comprised of poly(d,l ‐lactic acid)‐poly(ethylene glycol)‐poly(ethyleneimine) (PDLLA‐PEG‐PEI) block co‐polymers that capture these VOCs by chemical reaction. Polymeric nanoparticles (NPs) preparation involved nanoprecipitation and surface functionalization with branched PEI. The PDLLA‐PEG‐PEI NPs were characterized by using TGA, IR, ¹H NMR, elemental analysis, and TEM. The materials feature 1°, 2°, and 3° amines on their surface, capable of capturing aldehydes and carboxylic acids from gaseous mixtures. Aldehydes were captured by a condensation reaction forming imines, whereas carboxylic acids were captured by acid/base reaction. These materials reacted selectively with target contaminants obviating off‐target binding when challenged by other VOCs with orthogonal reactivity. The NPs outperformed conventional activated carbon sorbents.     

Interparticle spacing control in the superlattices of carboxylic acid-capped gold nanoparticles by hydrogen-bonding mediation

We have demonstrated that carboxylic acid-capped gold nanoparticles were self-assembled to form two-dimensional (2D) and/or three-dimensional (3D) superlattices at an air/water interface in the presence of a bifunctional hydrogen-bonding mediator such as 4-pyridinecarboxylic acid (PyC) or trans-3-(3-pyridyl)acrylic acid (PyA). Transmission electron microscopy revealed a hexagonal close-packed arrangement of nanoparticles in the superlattice with an extension of interparticle spacing. In the 2D superlattices, larger particles produced a higher-quality assembly having long-range translational ordering. Attenuated total reflectance IR (ATR-IR) spectroscopy revealed the presence of hydrogen bonds between the mediator used and the capping agents of carboxylic acid on nanoparticle surfaces. Since the experimentally obtained interparticle separation distance agreed approximately with that obtained by the geometrical model calculations, we conclude that the hydrogen-bonding mediation controlled the interparticle spacing or structure by monomolecular incorporation between adjacent nanoparticles in the superlattices.     

Key Non‐Metal Ingredients for Cu‐catalyzed “Click” Reactions in Glycerol: Nanoparticles as Efficient Forwarders

The effect of long‐alkyl‐chain amines in CuI‐assisted azide–alkyne cycloadditions of terminal alkynes with organic azides in glycerol and other environmentally benign solvents (water, ethanol) has been examined. The presence of these additives favors the in situ formation of Cu^I‐based nanoparticles and results in an increase of the catalytic reactivity. In glycerol, liquid‐phase transmission electron microscopy (TEM) analyses, enabled by the negligible vapor pressure of this solvent, proved that Cu^I nanoparticles are responsible for the observed catalytic activity. The wide variety of alkynes and azides of which this effect has been investigated (14 combinations) confirms the role played by these additives in Cu‐catalyzed Huisgen cycloadditions.     

Copper Catalyzed C−H Activation

Activation of C?H bonds and their application in cross coupling chemistry has received a wider interest in recent years. The conventional strategy in cross coupling reaction involves the pre‐functionalization step of coupling reactants such as organic halides, pseudo‐halides and organometallic reagents. The C?H activation facilitates a simple and straight forward approach devoid of pre‐functionalization step. This approach also addresses the environmental and economical issues involved in several chemical reactions. In this account, we have reported C?H bond activation of small organic molecules, for example, formamide C?H bond can be activated and coupled with β‐dicarbonyl or 2‐carbonyl substituted phenols under oxidative conditions to yield carbamates using inexpensive copper catalysts. Phenyl carbamates were successfully synthesized in moderate to good yields by cross dehydrogenative coupling (CDC) of phenols with formamides using copper catalysts in presence of a ligand. We have also prepared unsymmetrical urea derivatives by oxidative cross coupling of formamides with amines using copper catalysts. Synthesis of N,N‐dimethyl substituted amides, 5‐substituted‐γ‐lactams and α‐acyloxy ethers was carried out from carboxylic acids using recyclable CuO nanoparticles. Copper nanoparticles afforded N‐aryl‐γ‐amino‐γ‐lactams by oxidative coupling of aromatic amines with 2‐pyrrolidinone. Reusable transition metal HT‐derived oxide catalyst was used for the synthesis of N,N‐dimethyl substituted amides by the oxidative cross‐coupling of carboxylic acids and substituted benzaldehydes. Overview of our work in this area is summarized.     

Helicoidal Patterning of Nanorods with Polymer Ligands

Chiral packing of ligands on the surface of nanoparticles (NPs) is of fundamental and practical importance, as it determines how NPs interact with each other and with the molecular world. Herein, for gold nanorods (NRs) capped with end‐grafted nonchiral polymer ligands, we show a new mechanism of chiral surface patterning. Under poor solvency conditions, a smooth polymer layer segregates into helicoidally organized surface‐pinned micelles (patches). The helicoidal morphology is dictated by the polymer grafting density and the ratio of the polymer ligand length to nanorod radius. Outside this specific parameter space, a range of polymer surface structures was observed, including random, shish‐kebab, and hybrid patches, as well as a smooth polymer layer. We characterize polymer surface morphology by theoretical and experimental state diagrams. The helicoidally organized polymer patches on the NR surface can be used as a template for the helicoidal organization of other NPs, masked synthesis on the NR surface, as well as the exploration of new NP self‐assembly modes.     

Nickel‐Catalyzed Synthesis of Dialkyl Ketones from the Coupling of N‐Alkyl Pyridinium Salts with Activated Carboxylic Acids

While ketones are among the most versatile functional groups, their synthesis remains reliant upon reactive and low‐abundance starting materials. In contrast, amide formation is the most‐used bond‐construction method in medicinal chemistry because the chemistry is reliable and draws upon large and diverse substrate pools. A new method for the synthesis of ketones is presented here that draws from the same substrates used for amide bond synthesis: amines and carboxylic acids. A nickel terpyridine catalyst couples N‐alkyl pyridinium salts with in situ formed carboxylic acid fluorides or 2‐pyridyl esters under reducing conditions (Mn metal). The reaction has a broad scope, as demonstrated by the synthesis of 35 different ketones bearing a wide variety of functional groups with an average yield of 60±16 %. This approach is capable of coupling diverse substrates, including pharmaceutical intermediates, to rapidly form complex ketones.     

Self-assembled monolayers of alkanoic acids on the native oxide surface of SS316L by solution deposition

Stainless steel 316L is a widely used biomaterial substrate whose biocompatibility could be improved by surface modification. As a first step in this process, self-assembled monolayers of octanoic acid, octadecylcarboxylic acid, 16-hydroxyhexadecanoic acid, 12-aminododecanoic acid, and 1,12-dodecane dicarboxylic acid have been formed on the native oxide surface of stainless steel 316L by a simple, one-step solution deposition method. The ordering, close-packing, and coverage of the monolayers formed were characterized by diffuse reflectance infrared spectroscopy, contact angle measurements, and atomic force microscopy. The same procedure was applicable for all long alkyl chain carboxylic acids. This process formed chemically and mechanically stable monolayers. These carboxylic acids formed a bidentate bond with the stainless steel substrate. Robust chemical attachment of the acids to stainless steel through a simple process provides a stepping stone to improving the biocompatibility of stainless steel 316L.     

A direct conversion of carboxylic acids to methylthiomethyl esters using a microwave-assisted pummerer rearrangement with dimethylsulfoxide

A simple microwave-assisted method for the conversion of carboxylic acids to MTM esters is presented. This new process allows for rapid introduction of an MTM ester protecting group to a variety of carboxylic acids including alkyl, electron-rich aromatic, and long chain unsaturated carboxylic acids. The products isolated from this reaction are very pure after a simple extraction, which eliminates the need for further purification. The reaction has also been carried out on 1.50 g without deterioration of product yields or purity.     

Immobilization of lipases on hydrophobilized zirconia nanoparticles: highly enantioselective and reusable biocatalysts

Our study has demonstrated for the first time that zirconia nanoparticles modified by a simple carboxylic surfactant of a very long alkyl chain can significantly enhance the activity of the immobilized lipases for asymmetric synthesis in organic media. Zirconia nanoparticles of ca. 20 nm diameter were grafted with carboxylic surfactant modifiers from Tween 85 and erucic acid. The surface of nanoparticles was successfully changed from hydrophilic to hydrophobic. Lipases from Candida rugosa and Pseudomonas cepacia were immobilized on the modified zirconia nanoparticles by adsorption in aqueous solution. The immobilized lipases were used for the resolution of ( R, S)-ibuprofen and ( R, S)-1-phenylethanol through esterification and acylation, respectively, in isooctane organic solvent. When immobilized on erucic acid-modified zirconia, both lipases gave significantly higher activity and enantioselectivity compared with those from their corresponding crude lipase powders. The nanohybrid biocatalysts are stable and can be reused for eight cycles without loss in activity and selectivity. The interaction between the hydrophobic surface of zirconia support and lipases probably induces the conformational rearrangement of lipases into an active, stable form.     

An Experimental and Theoretical Approach to Investigate the Effect of Chain Length on Aminothiol Adsorption and Assembly on Gold

Despite the numerous studies on the self‐assembled monolayers (SAMs) of alkylthiols on gold, the mechanisms involved, especially the nature and influence of the thiol–gold interface are still under debate. In this work the adsorption of aminothiols on Au(111) surfaces has been studied by using surface IR and X‐ray photoelectron spectroscopy (XPS) as well as by density functional theory (DFT) modeling. Two aminothiols were used, cysteamine (CEA) and mercaptoundecylamine (MUAM), which contain two and eleven carbon atoms, respectively. By combining experimental and theoretical methods, it was possible to draw a molecular picture of the thiol–gold interface. The long‐chain aminothiol produced better ordered SAMs, but, interestingly, the XPS data showed different sulfur binding environments depending on the alkyl chain length; an additional peak at low binding energy was observed upon CEA adsorption, which indicates the presence of sulfur in a different environment. DFT modeling showed that the positions of the sulfur atoms in the SAMs on gold with similar unit cells [(2√3×2√3)R30°] depended on the length of the alkyl chain. Short‐chain alkylthiol SAMs were adsorbed more strongly than long‐chain thiol SAMs and were shown to induce surface reconstruction by extracting atoms from the surface, possibly forming adatom/vacancy combinations that lead to the additional XPS peak. In the case of short alkylthiols, the thiol–gold interface governs the layer, CEA adsorbs strongly, and the mechanism is closer to single‐molecule adsorption than self‐assembly, whereas for long chains, interactions between alkyl chains drive the system to self‐assembly, leading to a higher level of SAM organization and restricting the influence of the sulfur–gold interface.