Syntheses and reactions of functional polymers. XCIII. Syntheses of polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide structure in the chain and the use of these activated polymer esters of N-blocked amino acids or peptides

Polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide residue were designed in order to achieve acyl activation of a reacting carboxylic acid in the solid phase. These polymers were prepared through the following three routes: (a) styrene was allowed to copolymerize with N-(4-hydroxy-3-nitrophenyl)- or N-(4-acetoxy-3-nitrophenyl)maleimide, (b) styrene was copolymerized with N-(4-acetoxyphenyl)maleimide in the presence of divinylbenzene (DVB), and the copolymer obtained was hydrolyzed and nitrated, (c) a copolymer of maleic anhydride and styrene was reacted with p-aminophenol, followed by nitration. The polymers prepared by routes b and c were converted to the activated polymer esters of N-blocked amino acids and peptides by using dicyclohexylcarbodiimide (DCC). The acylated polymers thus obtained were treated with amino acid esters and found to give peptides quantitatively without racemization.     

Synthesis and properties of polymers containing sprio(indoline-isoxazoline)

Polymers containing spiro(indoline-isoxazoline) nuclei were prepared by 1,3-dipolar cycloaddition reactions of N,N′-alkylene-bis-3,3-dimethyl-2-methyleneindolines with bis-hydroxamic chlorides. Irradiation of the polymers with UV in solution resulted in novel skeletal rearrangements and resulted in polymers containing benzo-1,5-diazocine-2-one nuclei. Photoconductivities of the polymers were also studied.     

Reactions on polymers with amine groups. I. Reactions of vinylpridine polymers and of their model compounds with unsaturated carboxylic acids

The reactions of vinylpyridine polymers with α,β-unsaturated carboxylic acids such as acrylic, methacrylic, crotonic, itaconic, cinnamic, fumaric, and maleic acids were studied. It was found that, when reacted with acrylic, itaconic and fumaric acids. poly(4-vinylpyridine) gave macromolecular betaine products while with maleic acid, betaine as well as the corresponding salt was obtained. Poly(2-vinylpyridine) reacted with the same acids as poly(4-vinylpyridine) gave only the salts. No significant changes were observed with the two polymers when reacted with methacrylic, crotonic, and cinnamic acids. To attempt to rationalize these observations with the two macromolecular tertiary amines, the reactions of 4-methyl and 2-methylpyridines with the same carboxylic acids were investigated. The ¹H-NMR methodology was generally applied to elucidate the chemical structure obtained. © 1995 John Wiley & Sons, Inc.     

Hydrothermal synthesis,crystal structure and photoluminescence of two homochiral zinc(II) coordination polymers

Metal–organic frameworks (MOFs) have potentially useful applications and an intriguing variety of architectures and topologies. Two homochiral coordination polymers have been synthesized by the hydrothermal method, namely poly[(μ‐N‐benzyl‐L‐phenylalaninato‐κ⁴O,O′:O,N)(μ‐formato‐κ²O:O′)zinc(II)], [Zn(C₁₆H₁₆NO₂)(HCOO)]_n, (1), and poly[(μ‐N‐benzyl‐L‐leucinato‐κ⁴O,O′:O,N)(μ‐formato‐κ²O:O′)zinc(II)], [Zn(C₁₃H₁₈NO₂)(HCOO)]_n, (2), and studied by single‐crystal X‐ray diffraction, elemental analyses, IR spectroscopy and fluorescence spectroscopy. Compounds (1) and (2) each have a two‐dimensional layer structure, with the benzyl or isobutyl groups of the ligands directed towards the interlayer interface. Photoluminescence investigations show that both (1) and (2) display a strong emission in the blue region.     

Preparation and characterization of optically active polymers containing pendent and terminal chiral units via atom transfer radical polymerization

Optically active homopolymers and copolymers, bearing chiral units at the side chain and end chain, were prepared via atom transfer radical polymerization (ATRP) techniques. The well‐defined optically active polymers were obtained via the ATRP of pregnenolone methacrylate (PR‐MA), β‐cholestanol acrylate (CH‐A), and 20‐(hydroxymethyl)‐pregna‐1,4‐dien‐3‐one acrylate (HPD‐A) with ethyl 2‐bromopropionate as the initiator and CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalytic system. The experimental results showed that the polymerizations of PR‐MA, CH‐A, and HPD‐A proceeded in a living fashion, providing pendent chiral group polymers with low molecular weight distributions and predetermined molecular weights that increased linearly with the monomer conversion. Furthermore, the copolymers poly(pregnenolone methacrylate)‐b‐poly[(dimethylamino)ethyl methacrylate] and poly(pregnenolone methacrylate‐co‐methyl methacrylate) were synthesized and characterized with ¹H NMR, transmission electron microscopy, and polarimetric analysis. In addition, when optically active initiators estrone 2‐bromopropionate and 20‐(hydroxymethyl)‐pregna‐1,4‐dien‐3‐one 2‐bromopropionate were used for ATRPs of methyl methacrylate and styrene, terminal optically active poly(methyl methacrylate) and polystyrene were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1502–1513, 2006     

Quaternization of poly(tertiary aminostyrene)s and characterization of the quaternized polymers

The Menschutkin reaction of three poly(tertiary aminostyrene)s: poly(N,N-dimethyl-4-vinylphenylamine) (PPA), poly(N,N-dimethyl-4-vinylbenzylamine) (PBA), and poly(N,N-dimethyl-4-vinylphenethylamine) (PPTA) was investigated. These three polymers having narrow molecular weight distributions were prepared via anionic living polymerization. PPA reacted homogeneously with n-butyl bromide in N,N-dimethylformamide (DMF). PBA and PPTA also reacted homogeneously with n-butyl bromide in a mixture of DMF/methanol (75/25 v/v %). GPC measurement of the quaternized polymers was carried out using a mixture of water/acetonitrile (80/20 v/v %) containing 0.5M acetic acid and 0.3M sodium sulfate (pH = 2.9) as an eluant in order to suppress adsorption of the quaternized water soluble polymers on GPC gel. Results of GPC measurement indicate that the polymer chains of the three poly(tertiary aminostyrene)s are neither severed nor crosslinked in the process of quaternization. Temperature dependence and reaction time dependence on the degree of quaternization (DQ) were studied for PPT, PBA, and PPTA. By altering reaction time and temperature, the DQ values of the three poly(tertiary aminostyrene)s could be controlled in the range from 0% to nearly 100%. Quaternization reactivity of the amino groups in the three polymers was found to decrease in the order, PPTA, PBA, and PPA. The differences in reactivity are thought to be attributable to the electron density on the nitrogen atom of the N,N-dimethylamino group, and steric hindrance in the vicinity of the nitrogen atom. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1219–1226, 1997     

Asymmetric radical polymerization and copolymerization of N‐(1‐phenyldibenzosuberyl)methacrylamide and its derivative leading to optically active helical polymers

N‐(1‐Phenyldibenzosuberyl)methacrylamide (PDBSMAM) and its derivative N‐[(4‐butylphenyl)dibenzosuberyl]methacrylamide (BuPDBSMAM) were synthesized and polymerized in the presence of (+)‐ and (?)‐menthols at different temperatures. The tacticity of the polymers was estimated to be nearly 100% isotactic from the ¹H NMR spectra of polymethacrylamides derived in D₂SO₄. Poly(PDBSMAM) was not soluble in the common organic solvents, and its circular dichroism spectrum in the solid state was similar to that of the optically active poly(1‐phenyldibenzosuberyl methacrylate) (poly(PDBSMA)) with a prevailing one‐handed helicity, indicating that the poly(PDBSMAM) also has a similar helicity. Poly(BuPDBSMAM) was optically active and soluble in THF and chloroform. Its optical activity was much higher than that of the poly[N‐(triphenylmethayl)methacrylamide], suggesting that one‐handed helicity may be more efficiently induced on the poly(BuPDBSMAM). The copolymerization of BuPDBSMAM with a small amount of optically active N‐[(R)‐(+)‐1‐(1‐naphthyl)ethyl]methacrylamide, particularly in the presence of (?)‐menthol, produced a polymer with a high optical activity. The prevailing helicity may also be efficiently induced. The chiroptical properties of the obtained polymers were studied in detail. The chiral recognition by the polymers was also evaluated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1304–1315, 2007     

Synthesis and photochemical properties of solar energy storage-exchange polymers containing pendant norbornadiene moieties

New photoresponsive polymers 1–4 containing pendant norbornadiene (NBD) moieties with N,N-disubstituted amide groups were synthesized with 97, 98, 92, and 94% conversions by the substitution reaction of poly (p-chloromethyl) styrene] with potassium salts of 3piperidyloxo-2,5-NBD-2-carboxylic acid, 3-(NN-dipropylcarbamoyl) -2,5-NBD-2-carboxylic acid, 3-(N-methyl-N-phenylcarbamoyl)-2,5-NBD-2-carboxylic acid, and 3-(N,N-dipheylcarbmoyl)-2,5-NBD-2-carboxylic acid, respectively, using tetrabutylammonium bromide as a phase transfer catalyst for all. Polymers 1–4 with N,N-disubstituted amide groups on the NBD moieties were sensitized by adding appropriate photosensitizers such as Michler's ketone and 4- (N,N-dimethylamino) benzophenone in the film state, although the reactivities of the polymers without photosensitizer were lower than that of our previously reported polymer 5 containing pendant 3- (N-phenylcarbamoyl) -2,5-NBD-2-carboxylate moiety. It was also found that the photo-irradiated retaining polymers 1–4 containing the corresponding QC moieties can be stored about 80–86 kJ/mol of their thermal energy. © 1994 John Wiley & Sons, Inc.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Thermally reversible covalently bonded linear polymers prepared from a dihalide monomer and a salt of dicyclopentadiene dicarboxylic acid

Alkali and earth‐alkali salts of dicyclopentadiene dicarboxylic acid (DCPDCA) were prepared and employed as monomers in the polyesterification with an α,ω‐dihalide monomer, such as 1,4‐dichlorobutane (DCB), 1,4‐dibromobutane (DBB), α,α′‐dichloro‐p‐xylene (DCX), and α,α′‐dibromo‐p‐xylene (DBX). Novel linear polymers that possessed repeating moieties of dicyclopentadiene ( DCPD ) in the backbone were thus prepared. The IR and NMR spectra indicated that poly(tetramethylene dicyclopentadiene dicarboxylate) (PTMDD) with a number‐average molecular weight (M_n ) of about 1× 10⁴ and poly(p‐xylene dicyclopentadiene dicarboxylate) (PXDD) with a M_n of 4–6 × 10³ were obtained with an yield of about 80% via the polyesterification of the alkali salts with DBB and DCX, respectively. The reaction was carried out in the presence of a phase transfer catalyst, such as BzMe₃NBr or poly(ethylene glycol), in DMF at 100 °C for 4 h. Oligomers with a lower M_n (1–2 × 10³) were obtained when the earth‐alkali salts were employed as salt monomers. Compared to the irreversible linear polymers, poly(p‐xylene terephthalate) (PXTP) and poly(p‐xylene maleate) (PXM), prepared through the reaction between DCX and the potassium salts of terephthalic and maleic acid, respectively, the specific viscosities (η_sp) of the new linear polymers increased abnormally with the decrease of the temperature from 200 °C to 100 °C. This occurred due to the thermally reversible dedimerization/redimerization of  DCPD moieties of the backbone of the polymers via the catalyst‐free Diels–Alder/retro Diels–Alder cycloadditive reactions. The ratio of the η_sp at 100 °C and 200 °C of the reversible polymers was found to be much higher than that of PXTP and PXM, even when the heating/cooling cycle was carried out several times under a N₂ atmosphere. The obtained results indicated that thermally reversible covalently bonded linear polymer can be obtained by introducing the  DCPD structure into the backbone of the polymer through the polymerization of a monomer containing the  DCPD moiety. The reversible natures of the polymers and oligomers might be useful in preparing easily processable and recyclable polymers and thermosensor materials. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1662–1672, 2000     

Photochromic liquid-crystalline polymers. Main chain and side chain polymers containing azobenzene mesogens

Abstract

Two classes of thermotropic polymers were synthesized containing the trans-azobenzene unit as both a mesogenic and a photochromic group. In the former class (I) the azobenzene unit is incorporated into the main chain of substituted polymalonates, while in the latter class (II) it is appended as a side chain substituent to a polyacrylate backbone. The liquid-crystalline properties of the polymers were studied as a function of the chemical structure. All of the prepared polymers I have smectic phases. Polymers II are nematic and/or smectic, or cholesteric when including a chiral residue R'. Polymers I and II when radiated at 348 nm in chloroform solution undergo trans-to-cis isomerization of the azobenzene moiety. The calculated rate constants are comparable with those of low molar mass model compounds, and indicate that the macromolecular structure does not significantly affect the photoisomerization rate.     

Synthesis,structure and characterization of two copper(II) supramolecular coordination polymers based on a multifunctional ligand 2‐amino‐4‐sulfobenzoic acid

Copper(II) coordination polymers have attracted considerable interest due to their catalytic, adsorption, luminescence and magnetic properties. The reactions of copper(II) with 2‐amino‐4‐sulfobenzoic acid (H₂asba) in the presence/absence of the auxiliary chelating ligand 1,10‐phenanthroline (phen) under ambient conditions yielded two supramolecular coordination polymers, namely (3‐amino‐4‐carboxybenzene‐1‐sulfonato‐κO¹)bis(1,10‐phenanthroline‐κ²N,N′)copper(II) 3‐amino‐4‐carboxybenzene‐1‐sulfonate monohydrate, [Cu(C₇H₆N₂O₅S)(C₁₂H₈N₂)₂](C₇H₆N₂O₅S)·H₂O, (1), and catena‐poly[[diaquacopper(II)]‐μ‐3‐amino‐4‐carboxylatobenzene‐1‐sulfonato‐κ²O⁴:O^4′], [Cu(C₇H₆N₂O₅S)(H₂O)₂]_n, (2). The products were characterized by FT–IR spectroscopy, thermogravimetric analysis (TGA), solid‐state UV–Vis spectroscopy and single‐crystal X‐ray diffraction analysis, as well as by variable‐temperature powder X‐ray diffraction analysis (VT‐PXRD). Intermolecular π–π stacking interactions in (1) link the mononuclear copper(II) cation units into a supramolecular polymeric chain, which is further extended into a supramolecular double chain through interchain hydrogen bonds. Supramolecular double chains are then extended into a two‐dimensional supramolecular double layer through hydrogen bonds between the lattice Hasba⁻ anions, H₂O molecules and double chains. Left‐ and right‐handed 2₁ helices formed by the Hasba⁻ anions are arranged alternately within the two‐dimensional supramolecular double layers. Complex (2) exhibits a polymeric chain which is further extended into a three‐dimensional supramolecular network through interchain hydrogen bonds. Complex (1) shows a reversible dehydration–rehydration behaviour, while complex (2) shows an irreversible dehydration–rehydration behaviour.     

Synthesis and properties of optically active amino acid based polyacetylenes bearing eugenol and fluorene moieties

Novel optically active amino acid based polyacetylenes bearing eugenol and fluorene moieties were synthesized, and their properties, including chiroptical ones, were analyzed. N‐[1‐(3,4‐Dimethoxyphenyl)‐2‐propyloxycarbonyl]‐L ‐alanine N′‐propargylamide ( 1 ), N‐[1‐(3,4‐dimethoxyphenyl)‐2‐propyloxycarbonyl]‐L ‐alanine propargyl ester ( 2 ), N‐(9‐fluorenylmethoxycarbonyl)‐L ‐alanine N′‐propargylamide ( 3 ), and N‐(9‐fluorenylmethoxycarbonyl)‐L ‐alanine propargyl ester ( 4 ) were polymerized with a rhodium‐zwitterion catalyst in tetrahydrofuran to afford the corresponding polymers with moderate molecular weights ranging from 10,800 to 17,300 in good yields. Because of the large specific rotation and circular dichroism (CD) signal, it was concluded that the poly(N‐propargylamide)s [poly( 1 ) and poly( 3 )] took a helical structure with a predominantly one‐handed screw sense. The solvent and temperature could tune the helical structure of poly( 1 ). On the other hand, the poly(propargyl ester)s [poly( 2 ) and poly( 4 )] exhibited only small specific rotations and CD signals. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 810–819, 2006     

Organometallic polymers. XV. Synthesis and characterization of some ferrocene-containing oxysilane polymers from bis(dimethylamino)silanes

Three bis(dimethylamino)silane monomers have been polymerized with 1,1'-bis-(hydroxymethyl)ferrocene to give ferrocene-containing polyoxysilanes I and II. They were bis(dimethylamino)dimethylsilane (III), bis(dimethylamino)diphenylsilane (IV), and 1,4-bis(N,N-dimethylaminodimethylsilyl)benzene (V). Mixing of the diol and III or IV at O°C followed by heating resulted in polymerization to higher molecular weights than when the monomers were initially mixed at higher temperatures. At higher temperatures the formation of monomeric cyclic products seriously competed with polymerization, and the five atom bridged derivative, 3-sila-2,4-dioxa-3,3diphenyl[5]ferrocenophane (VI) was isolated in good yield. The use of silane V, where cyclization is not expected to compete, led to higher polymer yields and molecular weights. The polymers were low melting and I (R = C₆H₅) could be cast into films and weak fibers were drawn from its melt. The polymers were sensitive to hydrolytic decomposition; those containing Si-CH₃ linkages were completely hydrolyzed in refluxing THF-H₂O (10:1) in 1 hr. The polymers were characterized by viscosity studies, gel-permeation chromatography, and infrared and NMR spectroscopy.     

Dehydrocoupling and Diels–Alder reactions on siloxane polymers

Dehydrocoupling reactions between linear poly(methylhydrosiloxane) {Me₃SiO–[MeSi(H)O]_n–SiMe₃} and alcohols such as cholesterol, anthracene‐9‐carbinol, (12‐crown‐4)‐2‐carbinol, pyrene‐1‐carbinol, 4‐methyl‐5‐thiazoleethanol, and 4‐pyridilpropanol were introduced under catalytically mild conditions. The degrees of conversion of Si? H bonds in polysiloxane were monitored with ¹H NMR spectra. The reaction of the 9‐methoxyanthracene adduct on siloxane polymers and maleimide derivatives (maleimide, N‐ethylmaleimide, and maleic acid anhydride) produced [2+4]‐cycloadducts in very high yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4013–4019, 2002     

Fluorinated bio‐acceptable polymers via an ATRP macroinitiator approach

Polymers derived from bio‐acceptable poly(methyl methacrylate) (PMMA), poly(2‐methoxyethyl acrylate) (PMEA), and poly(oligo(ethylene glycol) methyl ether methacrylate) (PPEGMA) have been prepared via atom transfer radical polymerization (ATRP) utilizing an initiator prepared from a fluoroalkoxy‐terminated oligoethylene glycol. Polymerizations are controlled as seen by both linear first‐order kinetics and molecular weight evolution coupled with low polydispersities (<1.25) with respect to conversion. A range of ligands have been used depending upon the nature of the monomer: N‐(n‐propyl)‐2‐pyridyl‐methanimine with the methacrylates MMA and PEGMA and 1,1,4,7,10,10‐hexamethyltriethylene tetramine (HMTETA) with MEA. In all cases the use of the fluorinated initiator results in a lower apparent rate of propagation (k_p^app) as compared with the more conventional and nonfluorinated initiator, ethyl 2‐bromoisobutyrate. The initiator generally also serves as an internal plasticizer lowering the glass transition temperature from the parent polymers. The surface characteristics of the fluoroinitiator containing polymers are altered compared with the nonfluorinated analogues. This is reflected in a significant increase in the advancing water contact angles of all fluoro‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5770–5780, 2007     

A kinetic study of reactions between polymers

A study has been made of the rate of reaction of polymers containing different reactive groups. Poly(ethylene oxide) with isocyanate end-groups has been reacted with poly(ethylene oxide) with hydroxyl end-groups. Polymers with higher molecular weights were found to give lower rates of reaction. It was not possible to find an analogous low molecular weight compound which gives a reasonable rate of reaction compared to the polymers. This suggests that the rate of reaction is very dependent on the environment of the reacting groups and brings a possibility of ambiguity into the conclusions.     

Synthesis,structure, thermostability and luminescence properties of ZnII and CdII coordination polymers based on dimethysuccinate and flexible 1,4‐bis(imidazol‐1‐ylmethyl)benzene ligands

The design and synthesis of functional coordination polymers is motivated not only by their structural beauty but also by their potential applications. Zn^II and Cd^II coordination polymers are promising candidates for producing photoactive materials because these d¹⁰ metal ions not only possess a variety of coordination numbers and geometries, but also exhibit luminescence properties when bound to functional ligands. It is difficult to predict the final structure of such polymers because the assembly process is influenced by many subtle factors. Bis(imidazol‐1‐yl)‐substituted alkane/benzene molecules are good bridging ligands because their flexibility allows them to bend and rotate when they coordinate to metal centres. Two new Zn^II and Cd^II coordination polymers based on mixed ligands, namely, poly[[μ₂‐1,4‐bis(imidazol‐1‐ylmethyl)benzene‐κ²N³:N^3′]bis(μ₃‐2,2‐dimethylbutanoato‐κ³O¹:O⁴:O^4′)dizinc(II)], [Zn₂(C₆H₈O₄)₂(C₁₄H₁₄N₄)]_n, and poly[[μ₂‐1,4‐bis(imidazol‐1‐ylmethyl)benzene‐κ²N³:N^3′]bis(μ₃‐2,2‐dimethylbutanoato‐κ⁵O¹,O^1′:O⁴,O^4′:O⁴)dicadmium(II)], [Cd₂(C₆H₈O₄)₂(C₁₄H₁₄N₄)]_n, have been synthesized under hydrothermal conditions and characterized by single‐crystal X‐ray diffraction, elemental analysis, IR spectroscopy and thermogravimetric analysis. Both complexes crystallize in the monoclinic space group C2/c with similar unit‐cell parameters and feature two‐dimensional structures formed by the interconnection of S‐shaped Zn(Cd)–2,2‐dimethylsuccinate chains with 1,4‐bis(imidazol‐1‐ylmethyl)benzene bridges. However, the Cd^II and Zn^II centres have different coordination numbers and the 2,2‐dimethylsuccinate ligands display different coordination modes. Both complexes exhibit a blue photoluminescence in the solid state at room temperature.     

Polymeric organosilicon systems 14. Synthesis and some properties of alternating polymers composed of a dithienylene group and a mono-, di- or tri-silanylene unit

Poly[5, 5′ - (dimethylsilylene) - 2, 2′ - dithienylene] (4a), poly[5, 5′ -(methylphenylsilylene)-2, 2′ -dithienylene] (4b), poly[5, 5′ -(1, 1, 2, 2-tetramethyldisilanylene)-2, 2′ -dithienylene] (4c), poly[5, 5′-(1, 2-dimethyl-1, 2-diphenyldisilanylene)-2, 2′ -dithienylene] (4d), poly[5, 5′-(1, 2, 2, 2-tetramethyldisilanylene)-2, 2′-dithienylene] (4e), and poly[5, 5′-(1, 1, 2, 2, 3, 3 - hexamethyltrisilanylene) - 2, 2′ -dithienylene] were synthesized by dehalogenative coupling of the respective bis(2-bromothienyl)- substituted mono, di- and tri-silanes with magnesium in the presence of a catalytic amount of a nickel(II) complex in 16–99% yields. The polymers thus obtained are light-yellow solids and soluble in common organic solvents. Molecular weights, M_w, of the polymers were measured and found to be 7800–35 000 by gel-permeation chromatography relative to polystyrene standards. The photochemical properties of the polymers (4a–4d) having silylene and disilanylene units were investigated. Only poly[5, 5′-(1, 2-dimethyl-1, 2-diphenyl-disilanylene)-2, 2′-dithienylene] (4d) was found to be photoactive, but the others were inactive. When the thin solid films prepared from the polymers 4a–4e by spin-coating were exposed to antimony(V) fluoride in vacuo, the films became conducting; their conductivities were determined to be 10^?2 – 10^?3 S cm^?1 by the four-probe method.     

Synthesis,characterization, and gas permeation properties of adamantane‐containing polymers of intrinsic microporosity

A new bis(catechol) monomer, namely, 4,4′‐((1r,3r)‐adamantane‐2,2‐diyl)bis(benzene‐1,2diol) (THADM) was synthesized by condensation of 2‐adamantanone with veratrole followed by demethylation of the formed (1r,3r)‐2,2‐bis(3,4 dimethoxyphenyl)adamantane. Polycondensation of THADM and various compositions of THADM and 5,5,6′,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethylspirobisindane was performed with 2,3,5,6‐tetrafluoroterephthalonitrile (TFTPN) to obtain the homopolymer and copolymers. These polymers demonstrated good solubility in common organic solvents such as dichloromethane, chloroform, and tetrahydrofuran and could be cast into tough films from their chloroform solutions. GPC analysis revealed that number average molecular weights of polymers were in the range 48,100–61,700 g mol⁻¹, suggesting the formation of reasonably high molecular weight polymers. They possessed intrinsic microporosity with Brunauer‐Emmett‐Teller (BET) surface area in the range 703–741 m² g⁻¹. Thermogravimetric analysis of polymers indicated that 10% weight loss temperature was in the range 513–518 °C demonstrating their excellent thermal stability. THADM‐based polymer of intrinsic microporosity (PIM) showed P(CO₂) = 1080, P(O₂) = 232 and appreciable selectivity [α(CO₂/CH₄) = 22.6, α(CO₂/N₂) = 26.7, and α(O₂/N₂)= 5.7]. The gas permeability measurements revealed that with increase in the content of adamantane units in PIMs, selectivity increased and permeability decreased, following the trade‐off relationship. The gas separation properties of PIMs containing adamantane units were located close to 2008 Robeson upper bound for gas pairs such as CO₂/CH₄, CO₂/N₂, H₂/N₂, and O₂/N₂. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 16–24