Curved polymer and polyelectrolyte brushes beyond the Daoud-Cotton model

We revise the classical Daoud-Cotton (DC) model to describe conformations of polymer and polyelectrolyte chains end-grafted to convex spherical and cylindrical surfaces. In the framework of the DC model, local stretching of chains in the brush does not depend on the degree of polymerization of grafted chains, and the polymer density profile follows a single-exponent power law. This model, however, does not correspond to a minimum in free energy of the curved brush. The nonlocal (NL) approximation exploited in the present paper implies the minimization of the overall free energy of the brush and predicts that the polymer density profile does not follow a single-exponent power law. In the limit of large surface curvature the NL approximation provides the same scaling laws for brush thickness and free energy as the local DC model. Numerical prefactors are however different. Extra extension of chains in the brush interior region leads to larger equilibrium brush thickness and lower free energy per chain. A significant difference between outcomes of the two models is found for brushes formed by ionic polymers, particularly for weakly dissociating (p H-sensitive) polyelectrolytes at low solution salinity.     

Static and dynamic properties of grafted ring polymer: Molecular dynamics simulation

The static and dynamic properties of a system of end-grafted flexible ring polymer chains grafted to a flat substrate and exposed to a good solvent are studied by using a molecular dynamics method. The monomers are described by a coarse-grained bead-spring model. Varying the grafting density ρ and the degree of polymerization or chain length N, we obtain the density profiles of monomers, study the structural properties of the chain (radius of gyration, bond orientational parameters, etc.), and also present the dynamic characteristics such as chain energy and bond force. Compared with a linear polymer brush, the ring polymer brush exhibits different static and dynamic properties for moderate or short chain length, while it behaves like linear polymer brush in the regime of long chain length.     

Effects of an attractive wall on the translocation of polymer under driving

The effects of an attractive wall at the trans side on the translocation of an eight-site bond-fluctuation model (BFM) polymer through a pore in a membrane under driving are simulated by the dynamic Monte Carlo method. The attractive wall shows two contrary effects: its excluded volume effect reduces configuration entropy and thus hinders the translocation of the polymer, while its attraction decreases the energy and thus accelerates the translocation. At a critical polymer-wall interaction ε*?≈-?1, we find that the two effects compensate each other and the translocation time τ is roughly independent of the separation distance between the wall and the pore. The value ε*?≈-?1 is roughly equal to the critical adsorption point for the BFM polymer. Moreover, the value of the critical attraction is roughly independent of chain length N and chemical potential difference Δμ. At last, a scaling relation τ?～?N(α) is observed for polymer translocation at a high value of NΔμ. Though the translocation time is highly dependent on the polymer-wall interaction and pore-wall separation distance, the exponent α is always about 1.30?±?0.05 so long as NΔμ is large enough.     

Annealed Scaling for a Charged Polymer

This paper studies an undirected polymer chain living on the one-dimensional integer lattice and carrying i.i.d. random charges. Each self-intersection of the polymer chain contributes to the interaction Hamiltonian an energy that is equal to the product of the charges of the two monomers that meet. The joint probability distribution for the polymer chain and the charges is given by the Gibbs distribution associated with the interaction Hamiltonian. The focus is on the annealed free energy per monomer in the limit as the length of the polymer chain tends to infinity. We derive a spectral representation for the free energy and use this to prove that there is a critical curve in the parameter plane of charge bias versus inverse temperature separating a ballistic phase from a subballistic phase. We show that the phase transition is first order. We prove large deviation principles for the laws of the empirical speed and the empirical charge, and derive a spectral representation for the associated rate functions. Interestingly, in both phases both rate functions exhibit flat pieces, which correspond to an inhomogeneous strategy for the polymer to realise a large deviation. The large deviation principles in turn lead to laws of large numbers and central limit theorems. We identify the scaling behaviour of the critical curve for small and for large charge bias. In addition, we identify the scaling behaviour of the free energy for small charge bias and small inverse temperature. Both are linked to an associated Sturm-Liouville eigenvalue problem. A key tool in our analysis is the Ray-Knight formula for the local times of the one-dimensional simple random walk. This formula is exploited to derive a closed form expression for the generating function of the annealed partition function, and for several related quantities. This expression in turn serves as the starting point for the derivation of the spectral representation for the free energy, and for the scaling theorems. What happens for the quenched free energy per monomer remains open. We state two modest results and raise a few questions.     

Adsorption of polymer chains by disordered traps

We study the adsorption cross-over of ideal polymer chains in an environment of disordered traps. Starting from the assumption of an optimal cluster size of traps (optimal fluctuation method) we derive a general scaling form of the free energy function for arbitrary spatial dimensions. For small concentrations of traps we find a cross-over from localized (adsorbed) behavior to delocalized behavior depending on the chain's length and on the depth of the traps; this is connected with the non-monotonic behavior of the chain's extension. In terms of the free energy of the chain this cross-over resembles a first order transition scenario, the chain gets localized at many traps at once. Received 18 November 1998     

外力驱动作用下高分子链在表面吸附性质的计算机模拟

采用退火法模拟研究受外力F驱动的高分子链在吸引表面的吸附特性.通过高分子链的平均表面接触数〈M〉与温度T之间的关系计算临界吸附温度T_c,并发现T_c随着F的增加而减小;进而通过高分子链的均方回转半径分析外力驱动作用对高分子链构象的影响,并从回转半径极小值或者垂直外力方向的y和z分量的变化交叉校验临界吸附点T_c.模拟计算了处于吸附状态的高分子链随着外力F的增加是否会发生吸附状态到脱附状态的相变以及发生相变所需施加的外力是否由温度所决定.模拟结果表明:两种不同温度下高分子链的吸附性质和构象性质受外力驱动作用而产生不同现象,在温度区间T*_cTT_c时会发生脱附现象,而在TT*_c时不会发生脱附现象.     

Adsorption effects and NMR properties: Continuous chain approach

The NMR properties of nuclei linked to long linear polymer molecules are sensitive to the influence of hard walls. In this context, the residual energy of tensorial spin-spin interactions is calculated using a path integral approach. Several thermodynamic quantities of the polymer system (free energy, equation of state,...) are also expressed, taking chain stiffness effects and the presence of two repulsive walls into consideration.     

半刚性高分子链螺旋结构诱导纳米棒的有序结构

在自然界中, 螺旋结构广泛存在. 在熵的驱动下, 高分子链能在某些特殊情形下形成螺旋结构. 采用分子动力学方法研究了高分子链诱导纳米棒的自组装行为, 发现纳米棒/高分子链体系的构象与纳米棒的数量、高分子链的刚性等密切相关. 当纳米棒与高分子链之间存在适度吸附能时, 纳米棒能够形成三种完全不同的构象, 特别是在半刚性高分子链诱导下纳米棒能够形成线型排列. 研究结果对新型材料制备具有一定指导意义.     

接枝聚合物对小分子的选择性吸附研究

文章应用密度泛函理论研究接枝于壁面的方阱链对二元小分子混合物的选择性吸附特性. 系统的Helmholtz剩余自由能泛函被表示为硬球排斥和方阱吸引两部分贡献之和,分别由硬球链流体状态方程和变阱宽方阱链流体状态方程的简单加权密度近似来进行计算. 用此理论方法,分别考察了接枝聚合物的结构性质,以及不同温度下接枝分子层对二元方阱流体的选择性吸附性能. 结果表明:分子刷厚度随接枝密度线性增长而随温度非线性增加,并且在高温下趋于饱和;在较低温度下,接枝聚合物刷能表现出很好的选择性吸附能力,当聚合物刷被加热到高于饱和温度时,该能力将大幅度地减弱. 关键词： 密度泛函理论 接枝聚合物 选择性吸附 方阱链     

Exact results for the adsorption of a semiflexible copolymer chain in three dimensions

Lattice model of directed self-avoiding walk has been solved analytically to investigate adsorption–desorption phase transition behaviour of a semiflexible sequential copolymer chain on a two-dimensional impenetrable surface perpendicular to the preferred direction of the walk of the copolymer chain in three dimensions. The stiffness of the chain has been accounted by introducing an energy barrier for each bend in the walk of the copolymer chain. Exact value of adsorption–desorption transition points have been determined using the generating function method for the cases in which one type of monomer is having interaction with the surface, namely (i) no interaction (ii) attractive interaction and (iii) repulsive interaction. Results obtained in each of the case show that for stiffer copolymer chain adsorption transition occurs at a smaller value of monomer surface attraction than a flexible copolymer chain. These features are similar to that of a semiflexible homopolymer chain adsorption.     

Triple minima in the free energy of semiflexible polymers

We study the free energy of the worm-like-chain model, in the constant-extension ensemble, as a function of the stiffness lambda for finite chains of length L. We find that the polymer properties obtained in this ensemble are qualitatively different from those obtained using constant-force ensembles. In particular, we find that as we change the stiffness parameter, t=L/lambda, the polymer makes a transition from the flexible to the rigid phase and there is an intermediate regime of parameter values where the free energy has three minima and both phases are stable. This leads to interesting features in the force-extension curves.     

Isotropic-to-nematic transition in melt of polydisperse semi-flexible homopolymers

The isotropic-to-nematic phase transition in a melt of semi-flexible homopolymers with length polydispersity have been considered within the Landau–de Gennes approach. The number of monomer units in chain is assumed to be a random variable distributed by the Schulz–Zimm distribution; the stiffness of macromolecules has been taken into account within discrete worm-like chain model. It was found that increase of polydispersity yields the increase of the temperature of the isotropic–nematic transition.     

Helix-like structure formation of a semi-flexible chain confined in a cylinder channel

Molecular dynamics method is used to study the conformation behavior of a semi-flexible polymer chain confined in a cylinder channel.A novel helix-like structure is found to form during the simulation.Moreover,the detailed characteristic parameters and formation probability of these helix-like structures under moderate conditions are investigated.We find that the structure is not a perfect helix,but a bundle of elliptical turns.In addition,we conduct a statistical analysis for the chain monomer distribution along the radial direction.This research contributes to our understanding of the microscopic conformation of polymer chains in confined environments filled with a solvent.     

Mean-field theory for polymer adsorption on curved surfaces

We discuss the influence of polymer adsorption on the curvature energy of an interface. Following an article by Clement and Joanny (J. Phys. II 7, 973 (1997)), a mean-field theory is used to calculate the surface tension, rigidity constants and spontaneous curvature associated with both reversible and irreversible polymer adsorption. In the case of irreversible polymer adsorption it is assumed that the amount of adsorbed polymer remains constant upon curving the interface. Unfortunately, constraining the amount of polymer by adding a Lagrange multiplier affects the thermodynamic state of the (free) polymer far away from the interface. Clement and Joanny solve this problem by removing the polymers in the bulk. We allow for the presence of free polymers, but to achieve this we have to apply a local external field to keep the adsorbed amount fixed. The results of the two approaches are compared and a physical interpretation is given. Received 25 July 2001 and Received in final form 5 December 2001     

Density functional theory for nonuniform polymer melts: Based on the universality of the free energy density functional

A density functional theory is proposed for nonuniform freely jointed tangential hard sphere polymer melts in which the bonding interaction is treated on the basis of the properties of the Dirac δ-function, thus avoiding the use of the single chain simulation in the theory. The excess free energy is treated by making use of the universality of the free energy density functional and the Verlet-modified (VM) bridge function. To proceed numerically, one of the input parameters, the second-order direct correlation function of a uniform polymer melt is obtained by solving numerically the Polymer-RISM integral equation with the Percus-Yevick (PY) closure. The predictions of the present theory for the site density distribution, the partition coefficient and the adsorption isotherm, near a hard wall or between two hard walls are compared with computer simulation results and with those of previous theories. Comparison indicates that the present approach is more accurate than the previous integral equation theory and the most accurate Monte Carlo density functional theories. The predicted oscillations of the medium-induced force between two hard walls immersed in polymer melts are consistent with the experimental results available in the literature. Received 18 April 2000     

Effect of Interaction upon Translocation of Confined Polymer Chain Through Nanopore

运用二维的键长涨落模型和蒙特卡洛方法研究高分子链从一个受限空间到自由空间穿孔过程中,链单体与纳米孔之间的相互作用.结果表明,在不同的链长和纳米孔交互作用下,高分子链成功穿越自由能能垒取决于链长和纳米孔长度,并且由于交互作用降低了自由能能垒,导致高分子链在纳米管的平均捕获时间缩短.     

Contraction and reswelling of a polymer chain near the critical point of a binary liquid mixture

We have studied the conformation change of a flexible linear polymer chain near the critical point of a binary liquid mixture using fluorescence correlation spectroscopy, which measured the hydrodynamic radius of the chains. Our results indicate that as the critical temperature (Tc) is approached, the chain size decreases. The polymer attains its most compact conformation when the correlation length of the critical fluctuations becomes comparable to the coil size. At very close to Tc, the polymer reexpands dramatically. To our knowledge, this is the first experimental evidence supporting the prediction of Brochard and de Gennes that a polymer chain will collapse and subsequently reswell on approaching Tc.     

Contribution to the statistical theory of solutions of polymers in a critical solvent

The thermodynamics of high polymers in equilibrium with a low-molecular solvent with a large correlation radius (super-and near-critical solvent) is studied. Special attention is devoted to the analysis of typical phase diagrams describing the conditions of solubility of a polymer in such a solvent. The nature of these diagrams is determined by the existence of long-range multiparticle attraction between the monomers, which increases as the critical point of the solvent is approached. At the critical point the contribution of this attraction to the free energy of the system is nonanalytic with respect to the polymer concentration. It is shown that the nontrivial dependences of the polymer-polymer and polymer-solvent coupling constants, which appear in the phenomenological analysis, on the pressure and temperature of the solvent play an important role in the quantitative analysis of the phase diagrams of the solubility of the polymer. These dependences are found in explicit form under the assumption that in the absence of intermonomer bonds the system can be described as a compressible two-component lattice alloy. The partition function of the system under study is represented as a functional integral over two coupled, strongly fluctuating fields, one of which, describing the fluctuations of the polymer density, is the 0 component. By virtue of the specific nature of the problem, the effective temperature corresponding to the 0-component of the field cannot be specified independently, but can be determined by minimizing the total free energy of the system. Zh. éksp. Teor. Fiz. 114, 910–929 (September 1998)     

受限于圆柱体内半刚性高分子链的螺旋结构转变

采用非格点珠簧球链模型, 结合Monte Carlo方法, 研究了半刚性高分子链受限于无限长圆柱体的构象性质. 模拟结果表明: 在圆柱体内表面附近具有吸附能的情况下, 当弯曲能b由小到大变化时, 发现半刚性高分子链由开始时的无规则被吸附在圆柱体内表面, 到逐渐出现螺旋结构, 最后伸展成类似棒状的结构. 同时计算了不同弯曲能b时的半刚性高分子链的平均螺旋数N_t, 平均每条链单体的螺旋百分比P_h和能量涨落. 发现高分子链螺旋结构的形成与转变, 不仅与圆柱体半径R的大小有关, 还与弯曲能b的大小有关. 研究结果能有助于加深对受限生物大分子构象的认识.     

Adsorption of a Gaussian random copolymer chain at an interface

We consider the adsorption of an isolated, Gaussian, random, and quenched copolymer chain at an interface. We first propose a simple analytical method to obtain the adsorption/depletion transition, by averaging over the disorder the partition function instead of the free energy. The adsorption thresholds obtained by previous authors at a solid/liquid and at a liquid/liquid interface for multicopolymer chains can be rederived using this method. We also compare the adsorption thresholds obtained for bimodal and for Gaussian disorder; they only agree for small disorder. We focus on the specific case of an ideally flat asymmetric liquid/liquid interface, and consider the situation where the chain is composed of monomers of two different chemical species A and B. The replica method is developed for this case. We show that the Hartree approximation, coupled to a replica symmetry assumption, leads to the same adsorption thresholds as obtained from our general method. In order to describe the properties of the adsorbed (or depleted) chain, we develop a new approximation for long chains, within the framework of the replica theory. In most cases, the behavior of a random copolymer chain can be mapped onto that of a homopolymer chain at an asymmetric attractive interface. The values of the effective adsorption energy are different for a random and a periodic copolymer chain. Finally, we consider the case of uncorrelated annealed disorder. The behavior of an annealed chain can be mapped onto that of a homopolymer chain at an asymmetric non attractive interface; hence, an annealed chain cannot adsorb at an asymmetric interface. Received 21 January 1999