Biomimetic iron(III) complexes of N3O and N3O2 donor ligands: protonation of coordinated ethanolate donor enhances dioxygenase activity

A series of iron(III) complexes 1-4 of the tripodal tetradentate ligands N,N-bis(pyrid-2-ylmethyl)-N-(2-hydroxyethyl)amine H(L1), N,N-bis(pyrid-2-ylmethyl)-N-(2-hydroxy- propyl)amine H(L2), N,N-bis(pyrid-2-ylmethyl)-N-ethoxyethanolamine H(L3), and N-((pyrid-2-ylmethyl)(1-methylimidazol-2-ylmethyl))-N-(2-hydroxyethyl)amine H(L4), have been isolated, characterized and studied as functional models for intradiol-cleaving catechol dioxygenases. In the X-ray crystal structure of [Fe(L1)Cl(2)] 1, the tertiary amine nitrogen and two pyridine nitrogen atoms of H(L1) are coordinated meridionally to iron(III) and the deprotonated ethanolate oxygen is coordinated axially. In contrast, [Fe(HL3)Cl(3)] 3 contains the tertiary amine nitrogen and two pyridine nitrogen atoms coordinated facially to iron(III) with the ligand ethoxyethanol moiety remaining uncoordinated. The X-ray structure of the bis(μ-alkoxo) dimer [{Fe(L5)Cl}(2)](ClO(4))(2)5, where HL is the tetradentate N(3)O donor ligand N,N-bis(1-methylimidazol-2-ylmethyl)-N-(2-hydroxyethyl)amine H(L5), contains the ethanolate oxygen donors coordinated to iron(III). Interestingly, the [Fe(HL)(DBC)](+) and [Fe(HL3)(HDBC)X] adducts, generated by adding ～1 equivalent of piperidine to solutions containing equimolar quantities of iron(III) complexes 1-5 and H(2)DBC (3,5-di-tert-butylcatechol), display two DBC(2-)→ iron(III) LMCT bands (λ(max): 1, 577, 905; 2, 575,915; 3, 586, 920; 4, 563, 870; 5, 557, 856 nm; Δλ(max), 299-340 nm); however, the bands are blue-shifted (λ(max): 1, 443, 700; 2, 425, 702; 3, 424, 684; 4, 431, 687; 5, 434, 685 nm; Δλ(max), 251-277 nm) on adding 1 more equivalent of piperidine to form the adducts [Fe(L)(DBC)] and [Fe(HL3)(HDBC)X]. Electronic spectral and pH-metric titration studies in methanol disclose that the ligand in [Fe(HL)(DBC)](+) is protonated. The [Fe(L)(DBC)] adducts of iron(III) complexes of bis(pyridyl)-based ligands (1,2) afford higher amounts of intradiol-cleavage products, whereas those of mono/bis(imidazole)-based ligands (4,5) yield mainly the auto-oxidation product benzoquinone. It is remarkable that the adducts [Fe(HL)(DBC)](+)/[Fe(HL3)(DBC)X] exhibit higher rates of oxygenation affording larger amounts of intradiol-cleavage products and lower amounts of benzoquinone.     

Oxygen activation by nonheme iron(II) complexes: alpha-keto carboxylate versus carboxylate

Mononuclear iron(II) alpha-keto carboxylate and carboxylate compounds of the sterically hindered tridentate face-capping ligand Tp(Ph2) (Tp(Ph2) = hydrotris(3,5-diphenylpyrazol-1-yl)borate) were prepared as models for the active sites of nonheme iron oxygenases. The structures of an aliphatic alpha-keto carboxylate complex, [Fe(II)(Tp(Ph2))(O(2)CC(O)CH(3))], and the carboxylate complexes [Fe(II)(Tp(Ph2))(OBz)] and [Fe(II)(Tp(Ph2))(OAc)(3,5-Ph(2)pzH)] were determined by single-crystal X-ray diffraction, all of which have five-coordinate iron centers. Both the alpha-keto carboxylate and the carboxylate compounds react with dioxygen resulting in the hydroxylation of a single ortho phenyl position of the Tp(Ph2) ligand. The oxygenation products were characterized spectroscopically, and the structure of the octahedral iron(III) phenolate product [Fe(III)(Tp(Ph2))(OAc)(3,5-Ph(2)pzH)] was established by X-ray diffraction. The reaction of the alpha-keto carboxylate model compounds with oxygen to produce the phenolate product occurs with concomitant oxidative decarboxylation of the alpha-keto acid. Isotope labeling studies show that (18)O(2) ends up in the Tp(Ph2) phenolate oxygen and the carboxylate derived from the alpha-keto acid. The isotope incorporation mirrors the dioxygenase nature of the enzymatic systems. Parallel studies on the carboxylate complexes demonstrate that the oxygen in the hydroxylated ligand is also derived from molecular oxygen. The oxygenation of the benzoylformate complex is demonstrated to be first order in metal complex and dioxygen, with activation parameters DeltaH++ = 25 +/- 2 kJ mol(-1) and DeltaS++ = -179 +/- 6 J mol(-1) K(-1). The rate of appearance of the iron(III) phenolate product is sensitive to the nature of the substituent on the benzoylformate ligand, exhibiting a Hammett rho value of +1.3 indicative of a nucleophilic mechanism. The proposed reaction mechanism involves dioxygen binding to produce an iron(III) superoxide species, nucleophilic attack of the superoxide at the alpha-keto functionality, and oxidative decarboxylation of the adduct to afford the oxidizing species that attacks the Tp(Ph2) phenyl ring. Interestingly, the alpha-keto carboxylate complexes react 2 orders of magnitude faster than the carboxylate complexes, thus emphasizing the key role that the alpha-keto functionality plays in oxygen activation by alpha-keto acid-dependent iron enzymes.     

Aggregation control by homologous tripodal tetradentate amino acid ligands in oxo-bridged diiron(III) aquo complexes

Isoelectronic oxo-bridged diiron(III) aquo complexes of the homologous tripodal tetradentate amino acid ligands, N,N'-bis(2-pyridylmethyl)-3-aminoacetate (bpg(-)) and N,N'-bis(2-pyridylmethyl)-3-aminopropionate (bpp(-)), containing [(H(2)O)Fe(III)-(mu-O)-Fe(III)(H(2)O)](4+) cores, oligomerise, respectively, by dehydration and deprotonation, or by dehydration only, in reversible reactions. In the solid state, [Fe(2)(O)(bpp)(2)(H(2)O)(2)](ClO(4))(2) (1(ClO(4))(2)) exhibits stereochemistry identical to that of [Fe(2)(O)(bpg)(2)(H(2)O)(2)](ClO(4))(2) (2(ClO(4))(2)), with the ligand carboxylate donor oxygen atoms and the water molecules located cis to the oxo bridge and the tertiary amine group trans to it. Despite their structural similarity, 1(2+) and 2(2+) display markedly different aggregation behaviour in solution. In the absence of significant water, 1(2+) dehydrates and dimerises to give the tetranuclear complex, [Fe(4)(O)(2)(bpp)(4)](ClO(4))(4) (3(ClO(4))(4)), in which the carboxylate groups of the four bpp(-) ligands act as bridging groups between two [Fe(2)(O)(bpp)(2)](2+) units. Under similar conditions, 2(2+) dehydrates and deprotonates to form dinuclear and trinuclear oligomers, [Fe(2)(O)(OH)(bpg)(2)](ClO(4)) (4ClO(4)) and [Fe(3)(O)(2)(OH)(bpg)(3)](ClO(4)) (5(ClO(4))), related by addition of 'Fe(O)(bpg)' units. The trinuclear 5(ClO(4)), characterised crystallographically as two solvates 5(ClO(4)).3H(2)O and 5(ClO(4)).2MeOH, is based on a hexagonal [Fe(3)(O)(2)(OH)(bpg)(3)](+) unit, formally containing one hydroxo and two oxo bridges. The different aggregation behaviour of 1(ClO(4))(2) and 2(ClO(4))(2) results from the difference of one methylene group in the pendant carboxylate arms of the amino acid ligands.     

Biomimetic aryl hydroxylation derived from alkyl hydroperoxide at a nonheme iron center. Evidence for an Fe(IV)=O oxidant

Many nonheme iron-dependent enzymes activate dioxygen to catalyze hydroxylations of arene substrates. Key features of this chemistry have been developed from complexes of a family of tetradentate tripodal ligands obtained by modification of tris(2-pyridylmethyl)amine (TPA) with single alpha-arene substituents. These included the following: -C(6)H(5) (i.e., 6-PhTPA), L(1); -o-C(6)H(4)D, o-d(1)-L(1); -C(6)D(5), d(5)-L(1); -m-C(6)H(4)NO(2), L(2); -m-C(6)H(4)CF(3), L(3); -m-C(6)H(4)Cl, L(4); -m-C(6)H(4)CH(3), L(5); -m-C(6)H(4)OCH(3), L(6); -p-C(6)H(4)OCH(3), L(7). Additionally, the corresponding ligand with one alpha-phenyl and two alpha-methyl substituents (6,6-Me(2)-6-PhTPA, L(8)) was also synthesized. Complexes of the formulas [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(n)())Fe(II)(OTf)(2)] (n = 1-7, OTf = (-)O(3)SCF(3)), and [(L(8))Fe(II)(OTf)(2)](2) were obtained and characterized by (1)H NMR and UV-visible spectroscopies and by X-ray diffraction in the cases of [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(6))Fe(II)(OTf)(2)], and [(L(8))Fe(II)(OTf)(2)](2). The complexes react with tert-butyl hydroperoxide ((t)()BuOOH) in CH(3)CN solutions to give iron(III) complexes of ortho-hydroxylated ligands. The product complex derived from L(1) was identified as the solvated monomeric complex [(L(1)O(-))Fe(III)](2+) in equilibrium with its oxo-bridged dimer [(L(1)O(-))(2)Fe(III)(2)(mu(2)-O)](2+), which was characterized by X-ray crystallography as the BPh(4)(-) salt. The L(8) product was also an oxo-bridged dimer, [(L(8)O(-))(2)Fe(III)(2)(mu(2)-O)](2+). Transient intermediates were observed at low temperature by UV-visible spectroscopy, and these were characterized as iron(III) alkylperoxo complexes by resonance Raman and EPR spectroscopies for L(1) and L(8). [(L(1))Fe(II)(OTf)(2)] gave rise to a mixture of high-spin (S = 5/2) and low-spin (S = 1/2) Fe(III)-OOR isomers in acetonitrile, whereas both [(L(1))Fe(OTf)(2)] in CH(2)Cl(2) and [(L(8))Fe(OTf)(2)](2) in acetonitrile afforded only high-spin intermediates. The L(1) and L(8) intermediates both decomposed to form respective phenolate complexes, but their reaction times differed by 3 orders of magnitude. In the case of L(1), (18)O isotope labeling indicated that the phenolate oxygen is derived from the terminal peroxide oxygen via a species that can undergo partial exchange with exogenous water. The iron(III) alkylperoxo intermediate is proposed to undergo homolytic O-O bond cleavage to yield an oxoiron(IV) species as an unobserved reactive intermediate in the hydroxylation of the pendant alpha-aryl substituents. The putative homolytic chemistry was confirmed by using 2-methyl-1-phenyl-2-propyl hydroperoxide (MPPH) as a probe, and the products obtained in the presence and in the absence of air were consistent with formation of alkoxy radical (RO(*)). Moreover, when one ortho position was labeled with deuterium, no selectivity was observed between hydroxylation of the deuterated and normal isotopomeric ortho sites, but a significant 1,2-deuterium shift ("NIH shift") occurred. These results provide strong mechanistic evidence for a metal-centered electrophilic oxidant, presumably an oxoiron(IV) complex, in these arene hydroxylations and support participation of such a species in the mechanisms of the nonheme iron- and pterin-dependent aryl amino acid hydroxylases.     

Fe(bipy)(CN)(4)](-) as a versatile building block for the design of heterometallic systems: synthesis, crystal structure, and magnetic properties of PPh(4)[Fe(III)(bipy)(CN)(4)] x H(2)O, [[Fe(III)(bipy)(CN)(4)](2)M(II)(H(2)O)(4)] x 4H(2)O, and [[Fe(III)(bipy)(CN)(4)](2)Zn(II)] x 2H(2)O [bipy = 2,2'-Bipyridine; M = Mn and Zn

The new cyano complexes of formulas PPh(4)[Fe(III)(bipy)(CN)(4)] x H(2)O (1), [[Fe(III)(bipy)(CN)(4)](2)M(II)(H(2)O)(4)] x 4H(2)O with M = Mn (2) and Zn (3), and [[Fe(III)(bipy)(CN)(4)](2)Zn(II)] x 2H(2)O (4) [bipy = 2,2'-bipyridine and PPh(4) = tetraphenylphosphonium cation] have been synthesized and structurally characterized. The structure of complex 1 is made up of mononuclear [Fe(bipy)(CN)(4)](-) anions, tetraphenyphosphonium cations, and water molecules of crystallization. The iron(III) is hexacoordinated with two nitrogen atoms of a chelating bipy and four carbon atoms of four terminal cyanide groups, building a distorted octahedron around the metal atom. The structure of complexes 2 and 3 consists of neutral centrosymmetric [[Fe(III)(bipy)(CN)(4)](2)M(II)(H(2)O)(4)] heterotrinuclear units and crystallization water molecules. The [Fe(bipy)(CN)(4)](-) entity of 1 is present in 2 and 3 acting as a monodentate ligand toward M(H(2)O)(4) units [M = Mn(II) (2) and Zn(II) (3)] through one cyanide group, the other three cyanides remaining terminal. Four water molecules and two cyanide nitrogen atoms from two [Fe(bipy)(CN)(4)](-) units in trans positions build a distorted octahedron surrounding Mn(II) (2) and Zn(II) (3). The structure of the [Fe(phen)(CN)(4)](-) complex ligand in 2 and 3 is close to that of the one in 1. The intramolecular Fe-M distances are 5.126(1) and 5.018(1) A in 2 and 3, respectively. 4 exhibits a neutral one-dimensional polymeric structure containing two types of [Fe(bipy)(CN)(4)](-) units acting as bismonodentate (Fe(1)) and trismonodentate (Fe(2)) ligands versus the divalent zinc cations through two cis-cyanide (Fe(1)) and three fac-cyanide (Fe(2)) groups. The environment of the iron atoms in 4 is distorted octahedral as in 1-3, whereas the zinc atom is pentacoordinated with five cyanide nitrogen atoms, describing a very distorted square pyramid. The iron-zinc separations across the single bridging cyanides are 5.013(1) and 5.142(1) A at Fe(1) and 5.028(1), 5.076(1), and 5.176(1) A at Fe(2). The magnetic properties of 1-3 have been investigated in the temperature range 2.0-300 K. 1 is a low-spin iron(III) complex with an important orbital contribution. The magnetic properties of 3 correspond to the sum of two magnetically isolated spin triplets, the antiferromagnetic coupling between the low-spin iron(III) centers through the -CN-Zn-NC- bridging skeleton (iron-iron separation larger than 10 A) being very weak. More interestingly, 2 exhibits a significant intramolecular antiferromagnetic interaction between the central spin sextet and peripheral spin doublets, leading to a low-lying spin quartet.     

Syntheses and structural characterization of dinuclear and tetranuclear iron(III) complexes with dinucleating ligands and their reactions with hydrogen peroxide

The iron(III) complexes [Fe(2)(HPTB)(mu-OH)(NO(3))(2)](NO(3))(2).CH(3)OH.2H(2)O (1), [Fe(2)(HPTB)(mu-OCH(3))(NO(3))(2)](NO(3))(2).4.5CH(3)OH (2), [Fe(2)(HPTB)(mu-OH)(OBz)(2)](ClO(4))(2).4.5H(2)O (3), [Fe(2)(N-EtOH-HPTB)(mu-OH)(NO(3))(2)](ClO(4))(NO(3)).3CH(3)OH.1.5H(2)O (4), [Fe(2)(5,6-Me(2)-HPTB)(mu-OH)(NO(3))(2)](ClO(4))(NO(3)).3.5CH(3)OH.C(2)H(5)OC(2)H(5).0.5H(2)O (5), and [Fe(4)(HPTB)(2)(mu-F)(2)(OH)(4)](ClO(4))(4).CH(3)CN.C(2)H(5)OC(2)H(5).H(2)O (6) were synthesized (HPTB = N,N,N',N'-tetrakis(2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane, N-EtOH-HPTB = N,N,N',N'-tetrakis(N' '-(2-hydroxoethyl)-2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane, 5,6-Me(2)-HPTB = N,N,N',N'-tetrakis(5,6-dimethyl-2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane). The molecular structures of 2-6 were established by single-crystal X-ray crystallography. Iron(II) complexes with ligands similar to the dinucleating ligands described herein have been used previously as model compounds for the dioxygen uptake at the active sites of non-heme iron enzymes. The same metastable (mu-peroxo)diiron(III) adducts were observed during these studies. They can be prepared by adding hydrogen peroxide to the iron(III) compounds 1-6. Using stopped-flow techniques these reactions were kinetically investigated in different solvents and a mechanism was postulated.     

Novel iron(III) complexes of sterically hindered 4N ligands: regioselectivity in biomimetic extradiol cleavage of catechols

The iron(III) complexes of the 4N ligands 1,4-bis(2-pyridylmethyl)-1,4-diazepane (L1), 1,4-bis(6-methyl-2-pyridylmethyl)-1,4-diazepane (L2), and 1,4-bis(2-quinolylmethyl)-1,4-diazepane (L3) have been generated in situ in CH 3CN solution, characterized as [Fe(L1)Cl 2] (+) 1, [Fe(L2)Cl 2] (+) 2, and [Fe(L3)Cl 2] (+) 3 by using ESI-MS, absorption and EPR spectral and electrochemical methods and studied as functional models for the extradiol cleaving catechol dioxygenase enzymes. The tetrachlorocatecholate (TCC (2-)) adducts [Fe(L1)(TCC)](ClO 4) 1a, [Fe(L2)(TCC)](ClO 4) 2a, and [Fe(L3)(TCC)](ClO 4) 3a have been isolated and characterized by elemental analysis, absorption spectral and electrochemical methods. The molecular structure of [Fe(L1)(TCC)](ClO 4) 1a has been successfully determined by single crystal X-ray diffraction. The complex 1a possesses a distorted octahedral coordination geometry around iron(III). The two tertiary amine (Fe-N amine, 2.245, 2.145 A) and two pyridyl nitrogen (Fe-N py, 2.104, 2.249 A) atoms of the tetradentate 4N ligand are coordinated to iron(III) in a cis-beta configuration, and the two catecholate oxygen atoms of TCC (2-) occupy the remaining cis positions. The Fe-O cat bond lengths (1.940, 1.967 A) are slightly asymmetric and differ by 0.027 A only. On adding catecholate anion to all the [Fe(L)Cl 2] (+) complexes the linear tetradentate ligand rearranges itself to provide cis-coordination positions for bidentate coordination of the catechol. Upon adding 3,5-di- tert-butylcatechol (H 2DBC) pretreated with 1 equiv of Et 3N to 1- 3, only one catecholate-to-iron(III) LMCT band (648-800 nm) is observed revealing the formation of [Fe(L)(HDBC)] (2+) involving bidentate coordination of the monoanion HDBC (-). On the other hand, when H 2DBC pretreated with 2 equiv of Et 3N or 1 or 2 equiv of piperidine is added to 1- 3, two intense catecholate-to-iron(III) LMCT bands appear suggesting the formation of [Fe(L)(DBC)] (+) with bidentate coordination of DBC (2-). The appearance of the DBSQ/H 2DBC couple for [Fe(L)Cl 2] (+) at positive potentials (-0.079 to 0.165 V) upon treatment with DBC (2-) reveals that chelated DBC (2-) in the former is stabilized toward oxidation more than the uncoordinated H 2DBC. It is remarkable that the [Fe(L)(HDBC)] (2+) complexes elicit fast regioselective extradiol cleavage (34.6-85.5%) in the presence of O 2 unlike the iron(III) complexes of the analogous linear 4N ligands known so far to yield intradiol cleavage products exclusively. Also, the adduct [Fe(L2)(HDBC)] (2+) shows a higher extradiol to intradiol cleavage product selectivity ( E/ I, 181:1) than the other adducts [Fe(L3)(HDBC)] (2+) ( E/ I, 57:1) and [Fe(L1)(HDBC)] (2+) ( E/ I, 9:1). It is proposed that the coordinated pyridyl nitrogen abstracts the proton from chelated HDBC (-) in the substrate-bound complex and then gets displaced to facilitate O 2 attack on the iron(III) center to yield the extradiol cleavage product. In contrast, when the cleavage reaction is performed in the presence of a stronger base like piperidine or 2 equiv of Et 3N a faster intradiol cleavage is favored over extradiol cleavage suggesting the importance of bidentate coordination of DBC (2-) in facilitating intradiol cleavage.     

XAS characterization of end-on and side-on peroxoiron(III) complexes of the neutral pentadentate N-donor ligand N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine

Peroxo intermediates are implicated in the catalytic cycles of iron enzymes involved in dioxygen metabolism. X-ray absorption spectroscopy has been used to gain insight into the iron coordination environments of the low-spin complex [Fe(III)(Me-TPEN)(eta(1)-OOH)](2+)(1) and the high-spin complex [Fe(III)(Me-TPEN)(eta(2)-O(2))](+)(2)(the neutral pentadentate N-donor ligand Me-TPEN =N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine) and obtain metrical parameters unavailable from X-ray crystallography. The complexes exhibit relatively large pre-edge peak areas of approximately 15 units, indicative of iron centers with significant distortions from centrosymmetry. These distortions result from the binding of peroxide, either end-on hydroperoxo for 1 (r(Fe-O)= 1.81A) or side-on peroxo for 2 (r(Fe-O)= 1.99 A). The XAS analyses of 1 strongly support a six-coordinate low-spin iron(III) center coordinated to five nitrogen atoms from Me-TPEN and one oxygen atom from an end-on hydroperoxide ligand. However, the XAS analyses of 2 are not conclusive: Me-TPEN can act either as a pentadentate ligand to form a seven-coordinate peroxo complex, which has precedence in the DFT geometry optimization of [Fe(III)(N4Py)(eta(2)-O(2))](+)(the neutral pentadentate N-donor ligand N4Py =N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine), or as a tetradentate ligand with a dangling pyridylmethyl arm to form a six-coordinate peroxo complex, which is precedented by the crystal structure of [Fe(2)(III)(Me-TPEN)(2)(Cl)(2)(mu-O)](2+).     

O2 activation by bis(imino)pyridine iron(II)-thiolate complexes

The new iron(II)-thiolate complexes [((iPr)BIP)Fe(II)(SPh)(Cl)] (1) and [((iPr)BIP)Fe(II)(SPh)(OTf)] (2) [BIP = bis(imino)pyridine] were prepared as models for cysteine dioxygenase (CDO), which converts Cys to Cys-SO(2)H at a (His)(3)Fe(II) center. Reaction of 1 and 2 with O(2) leads to Fe-oxygenation and S-oxygenation, respectively. For 1 + O(2), the spectroscopic and reactivity data, including (18)O isotope studies, are consistent with an assignment of an iron(IV)-oxo complex, [((iPr)BIP)Fe(IV)(O)(Cl)](+) (3), as the product of oxygenation. In contrast, 2 + O(2) results in direct S-oxygenation to give a sulfonato product, PhSO(3)(-). The positioning of the thiolate ligand in 1 versus 2 appears to play a critical role in determining the outcome of O(2) activation. The thiolate ligands in 1 and 2 are essential for O(2) reactivity and exhibit an important influence over the Fe(III)/Fe(II) redox potential.     

Ligand topology effect on the reactivity of a mononuclear nonheme iron(IV)-oxo complex in oxygenation reactions

Mononuclear nonheme iron(IV)-oxo complexes with two different topologies, cis-α-[Fe(IV)(O)(BQCN)](2+) and cis-β-[Fe(IV)(O)(BQCN)](2+), were synthesized and characterized with various spectroscopic methods. The effect of ligand topology on the reactivities of nonheme iron(IV)-oxo complexes was investigated in C-H bond activation and oxygen atom-transfer reactions; cis-α-[Fe(IV)(O)(BQCN)](2+) was more reactive than cis-β-[Fe(IV)(O)(BQCN)](2+) in the oxidation reactions. The reactivity difference between the cis-α and cis-β isomers of [Fe(IV)(O)(BQCN)](2+) was rationalized with the Fe(IV/III) redox potentials of the iron(IV)-oxo complexes: the Fe(IV/III) redox potential of the cis-α isomer was 0.11 V higher than that of the cis-β isomer.     

Mono- and binuclear complexes of iron(II) and iron(III) with an N4O ligand: synthesis, structures and catalytic properties in alkane oxidation

Three mononuclear iron complexes and one binuclear iron complex, [Fe(tpoen)Cl].0.5(Fe2OCl6) (1), [Fe(tpoen)Cl]PF6 (2), Fe(tpoen)Cl3 (3) and [[Fe(tpoen)]2(mu-O)](ClO4)4 (4) (tpoen = N-(2-pyridylmethoxyethyl)-N,N-bis(2-pyridylmethyl)amine), were synthesized as functional models of non-heme iron oxygenases. Crystallographic studies revealed that the Fe(II) center of 1 is in a pseudooctahedral environment with a pentadentate N4O ligand and a chloride ion trans to the oxygen atom. The Fe(III) center of 3 is ligated by three nitrogen atoms of tpoen and three chloride ions in a facial configuration. Each Fe(III) center of 4 is coordinated with four nitrogen atoms and an oxygen atom of tpoen with the Fe-O-Fe angle of 172.0(3) angstroms. Complexes 2, 3 and 4 catalysed the oxidation of cyclohexane with H2O2 in the total TNs of 24-36 with A/K ratios of 1.9-2.4. Under the same conditions they also catalysed both the oxidation of ethylbenzene to benzylic alcohol and acetobenzene with good activity (30-47 TN) and low selectivity (A/K 0.7), and the oxidation of adamantane with moderate activity (15-18 TN) and low regioselectivity (3 degrees/2 degrees 3.0-3.2). With mCPBA as oxidant the catalytic activities of 2, 3 and 4 increased 1.8 to 2.3-fold for the oxidation of cyclohexane and ethylbenzene and 6.3 to 7.5-fold for the oxidation of adamantane. Drastic enhancement of the regioselectivity was observed in the oxidation of adamantane (3 degrees/2 degrees 18.5-30.3).     

Iron(II) complexes with bio-inspired N,N,O ligands as oxidation catalysts: olefin epoxidation and cis-dihydroxylation

The Rieske dioxygenases are a group of non-heme iron enzymes, which catalyze the stereospecific cis-dihydroxylation of its substrates. Herein, we report the iron(II) coordination chemistry of the ligands 3,3-bis(1-methylimidazol-2-yl)propionate (L1) and its neutral propyl ester analogue propyl 3,3-bis(1-methylimidazol-2-yl)propionate (PrL1). The molecular structures of two iron(II) complexes with PrL1 were determined and two different coordination modes of the ligand were observed. In [Fe(II)(PrL1)(2)](BPh(4))(2) (3) the ligand is facially coordinated to the metal with an N,N,O donor set, whereas in [Fe(II)(PrL1)(2)(MeOH)(2)](OTf)(2) (4) a bidentate N,N binding mode is found. In 4, the solvent molecules are in a cis arrangement with respect to each other. Complex 4 is a close structural mimic of the crystallographically characterized non-heme iron(II) enzyme apocarotenoid-15-15'-oxygenase (APO). The mechanistic features of APO are thought to be similar to those of the Rieske oxygenases, the original inspiration for this work. The non-heme iron complexes [Fe(II)(PrL1)(2)](OTf)(2) (2) and [Fe(II)(PrL1)(2)](BPh(4))(2) (3) were tested in olefin oxidation reactions with H(2)O(2) as the terminal oxidant. Whereas 2 was an active catalyst and both epoxide and cis-dihydroxylation products were observed, 3 showed negligible activity under the same conditions, illustrating the importance of the anion in the reaction.     

Spectrophotometric studies on ion-pair extraction equilibria of the iron(ii) and iron(III) complexes with 4-(2-pyridylazo)resorcinol

The ion-pair extraction equilibria of the iron(II) and iron(III) chelates of 4-(2-pyridylazo)resorcinol (PAR, H(2)L) are described. The anionic chelates were extracted into chloroform with benzyldimethyltetradecylammonium chloride (QC1) as counter-ion. The extraction constants were estimated to be K(ex1)(Fe(II)) = [Q{Fe(II)(HL)L}](0)/[Q(+)][{Fe(II)(HL)L}(-)] = 10(8.59 +/- 0.11), K(ex2)(Fe(II)) = [Q(2){Fe(II)L(2)}](o)/ [Q(+)](2)[{Fe(II)L(2)}(2-)] = 10(12.17 +/- 0.10) and K(ex1)(Fe(III)) = [Q{Fe((III))L(2)}](o)/(Q(+)][{Fe(III)L(2)}(-)] = 10(6.78 +/- 0.15) at I = 0.10 and 20 degrees , where [ ](o) is concentration in the chloroform phase. Aggregation of Q{Fe(III)L(2)} in chloroform was observed and the dimerization constant (K(d) = [Q(2){Fe(III)L(2)}(2)](o)/[Q{Fe(III)L(2)}](o)(2)) was evaluated as log K(d) = 4.3 +/- 0.3 at 20 degrees . The neutral chelates of {Fe(II)(HL)(2)} and {Fe(III)(HL)L}, and the ion-pair of the cationic chelate, {Fe(III)(HL)(2)}ClO(4), were also extracted into chloroform or nitrobenzene. The relationship between the forms and extraction properties of the iron(II) and iron(III) PAR chelates are discussed in connection with those of the nickel(II) and cobalt(III) complexes. Correlation between the extraction equilibrium data and the elution behaviour of some PAR chelates in ion-pair reversed-phase partition chromatography is also discussed.     

Water affects the stereochemistry and dioxygen reactivity of carboxylate-rich diiron(II) models for the diiron centers in dioxygen-dependent non-heme enzymes

Carboxylate-bridged high-spin diiron(II) complexes with distinctive electronic transitions were prepared by using 4-cyanopyridine (4-NCC(5)H(4)N) ligands to shift the charge-transfer bands to the visible region of the absorption spectrum. This property facilitated quantitation of water-dependent equilibria in the carboxylate-rich diiron(II) complex, [Fe(2)(mu-O(2)CAr(Tol))(4)(4-NCC(5)H(4)N)(2)] (1), where (-)O(2)CAr(Tol) is 2,6-di-(p-tolyl)benzoate. Addition of water to 1 reversibly shifts two of the bridging carboxylate ligands to chelating terminal coordination positions, converting the structure from a paddlewheel to a windmill geometry and generating [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(4-NCC(5)H(4)N)(2)(H(2)O)(2)] (3). This process is temperature dependent in solution, rendering the system thermochromic. Quantitative treatment of the temperature-dependent spectroscopic changes over the temperature range from 188 to 298 K in CH(2)Cl(2) afforded thermodynamic parameters for the interconversion of 1 and 3. Stopped flow kinetic studies revealed that water reacts with the diiron(II) center ca. 1000 time faster than dioxygen and that the water-containing diiron(II) complex reacts with dioxygen ca. 10 times faster than anhydrous analogue 1. Addition of {H(OEt(2))(2)}{B}, where B(-) is tetrakis(3,5-di(trifluoromethyl)phenyl)borate, to 1 converts it to [Fe(2)(mu-O(2)CAr(Tol))(3)(4-NCC(5)H(4)N)(2)](B) (5), which was also structurally characterized. Mossbauer spectroscopic investigations of solid samples of 1, 3, and 5, in conjunction with several literature values for high-spin iron(II) complexes in an oxygen-rich coordination environment, establish a correlation between isomer shift, coordination number, and N/O composition. The products of oxygenating 1 in CH(2)Cl(2) were identified crystallographically to be [Fe(2)(mu-OH)(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(4-NCC(5)H(4)N)(2)].2(HO(2)CAr(Tol)) (6) and [Fe(6)(mu-O)(2)(mu-OH)(4)(mu-O(2)CAr(Tol))(6)(4-NCC(5)H(4)N)(4)Cl(2)] (7).     

Modular approach to tridentate N,O,N' ligands using pyrazolylborate chemistry

Two anionic tridentate N,O,N' chelators, [pz(Ph)B(mu-pz)(mu-O)B(Ph)pz](-) (3(-)) and [pz(Ph)(Ph)B(mu-pz)(mu-O)B(Ph)pz(Ph)](-) (4(-)), as well as the corresponding complexes [Fe(3)(py)Cl], [Fe(3)Cl(2)] and [Cu(3)Cl], have been synthesised and structurally characterised by X-ray crystallography (pz: pyrazolyl, pz(Ph): 3-phenylpyrazolyl, py: pyridine). Since our synthesis approach takes advantage of the highly modular pyrazolylborate chemistry, inexpensive and relatively resistant N,O,N' ligands of varying steric demand are readily accessible. The complexes [Fe(3)(py)Cl] and [Fe(3)Cl(2)] possess a distorted trigonal-bipyramidal configuration with the pyrazolyl rings occupying equatorial positions and the oxygen donor being located at an apical position. The complex [Cu(3)Cl] crystallises as chloro-bridged dimers featuring Cu(II) ions with ligand environments that are intermediate between a square-planar and a trigonal-bipyramidal geometry.     

High-valent nonheme iron. Two distinct iron(IV) species derived from a common iron(II) precursor

The reaction of [Fe(II)(beta-BPMCN)(OTf)2] (1, BPMCN = N,N'-bis(2-pyridylmethyl)-N,N'-dimethyl-trans-1,2-diaminocyclohexane) with tBuOOH at low-temperature yields alkylperoxoiron(III) intermediates 2 in CH2Cl2 and 2-NCMe in CH3CN. At -45 degrees C and above, 2-NCMe converts to a pale green species 3 (lambda(max) = 753 nm, epsilon = 280 M(-1) cm(-1)) in 90% yield, identified as [Fe(IV)(O)(BPMCN)(NCCH3)]2+ by comparison to other nonheme [Fe(IV)(O)(L)]2+ complexes. Below -55 degrees C in CH2Cl2, 2 decays instead to form deep turquoise 4 (lambda(max) = 656, 845 nm; epsilon = 4000, 3600 M(-1) cm(-1)), formulated to be an unprecedented alkylperoxoiron(IV) complex [Fe(IV)(BPMCN)(OH)(OOtBu)]2+ on the basis of M?ssbauer, EXAFS, resonance Raman, NMR, and mass spectral evidence. The reactivity of 1 with tBuOOH in the two solvents reveals an unexpectedly rich iron(IV) chemistry that can be supported by the BPMCN ligand.     

Reactivity of iron(II) 5,10,15,20-tetraaryl-21-oxaporphyrin with arylmagnesium bromide: formation of paramagnetic six-coordinate complexes with two axial aryl groups

Coordination of sigma-aryl carbanions by chloroiron(II) 5,20-ditolyl-10,15-diphenyl-21-oxaporphyrin (ODTDPP)Fe(II)Cl has been followed by (1)H NMR spectroscopy. Addition of pentafluorophenyl Grignard reagent (C(6)F(5))MgBr to the toluene solution of (ODTDPP)Fe(II)Cl in the absence of dioxygen at 205 K resulted in the formation of the high-spin (ODTDPP)Fe(II)(C(6)F(5)). The titration of (ODTDPP)Fe(II)Cl with a solution of (C(6)H(5))MgBr carried at 205 K yields a rare six-coordinate species which binds two sigma-aryl ligands [(ODTDPP)Fe(II)(C(6)H(5))(2)](-). Warming of the [(ODTDPP)Fe(II)(C(6)H(5))(2)](-) solution above 270 K results in the decomposition to mono-sigma-phenyliron species (ODTDPP)Fe(II)(C(6)H(5)). Controlled oxidation of [(ODTDPP)Fe(II)(C(6)H(5))(2)](-) with Br(2) affords (ODTDPP)Fe(III)(C(6)H(5))Br, which demonstrates a typical (1)H NMR pattern of low-spin sigma-aryl iron(III) porphyrin. The considered oxidation mechanism involves the (ODTDPP)Fe(III)(C(6)H(5))(2) species, which is readily reduced to the iron(I) 21-oxaporphyrin, followed by oxidation with Br(2) and replacement of one bromide anion by aryl substituent. The (1)H NMR spectra of paramagnetic iron complexes have been examined in detail. Functional group assignments have been made with the use of selective deuteration. The peculiar (1)H NMR spectral features of [(ODTDPP)Fe(II)(p-CH(3)C(6)H(4))(2)](-) (sigma-p-tolyl: ortho, 30.8; meta, 53.6; para-CH(3), 42.1; furan: -16.0; beta-H pyrrole: -27.5, -34.3, -41.8 ppm, at 205 K) are without a parallel to any iron(II) porphyrin or heteroporphyrin and indicate a profound alteration of the electronic structure of iron(II) porphyrin upon the coordination of two sigma-aryls.     

Synthetic analogue of the [Fe(2)(mu-OH)(2)(mu-O(2)CR)](3+) core of soluble methane monooxygenase hydroxylase via synthesis and dioxygen reactivity of carboxylate-bridged diiron(II) complexes

We describe the synthesis and dioxygen reactivity of diiron(II) tetracarboxylate complexes [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(N,N-Me(2)en)(2)] (2) and [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(N,N-Bn(2)en)(2)] (6), where Ar(Tol)CO(2)(-) = 2,6-di(p-tolyl)benzoate. These complexes were prepared as models for the diiron(II) center in the hydroxylase component of soluble methane monooxygenase (MMOH). Compound 6 reacts with dioxygen to afford PhCHO in approximately 60(5)% yield, following oxidative N-dealkylation of the pendant benzyl group on the diamine ligand. The diiron(III) complex [Fe(2)(mu-OH)(2)(mu-O(2)CAr(Tol))(O(2)CAr(Tol))(3)(N-Bnen)(N,N-Bn(2)en)] (8) was isolated from the reaction mixture. The 4.2 K M?ssbauer spectrum of 8 displays a single quadrupole doublet with parameters delta = 0.48(2) mm s(-1) and Delta E(Q) = 0.61(2) mm s(-1). The [Fe(2)(mu-OH)(2)(mu-O(2)CR)](3+) core structure in 8 matches that of the fully oxidized form of MMOH. The conversion of 6 to 8 closely parallels the chemistry of MMOH in which an O(2)-derived oxygen atom is inserted into the C-H bond of methane. Several reaction pathways are considered to account for this novel chemical transformation, and these are compared with mechanistic frameworks previously developed for related cytochrome P450 and copper(I) dioxygen chemistry.     

A synthetic analogue of the active site of Fe-containing nitrile hydratase with carboxamido N and thiolato S as donors: synthesis, structure, and reactivities.

As part of our work on models of the iron(III) site of Fe-containing nitrile hydratase, a designed ligand PyPSH(4) with two carboxamide and two thiolate donor groups has been synthesized. Reaction of (Et(4)N)[FeCl(4)] with the deprotonated form of the ligand in DMF affords the mononuclear iron(III) complex (Et(4)N)[Fe(III)(PyPS)] (1) in high yield. The iron(III) center is in a trigonal bipyramidal geometry with two deprotonated carboxamido nitrogens, one pyridine nitrogen, and two thiolato sulfurs as donors. Complex 1 is stable in water and binds a variety of Lewis bases at the sixth site at low temperature to afford green solutions with a band around 700 nm. The iron(III) centers in these six-coordinate species are low-spin and exhibit EPR spectra much like the enzyme. The pK(a) of the water molecule in [Fe(III)(PyPS)(H(2)O)](-) is 6.3 +/- 0.4. The iron(III) site in 1 with ligated carboxamido nitrogens and thiolato sulfurs does not show any affinity toward nitriles. It thus appears that at physiological pH, a metal-bound hydroxide promotes hydration of nitriles nested in close proximity of the iron center in the enzyme. Redox measurements demonstrate that the carboxamido nitrogens prefer Fe(III) to Fe(II) centers. This fact explains the absence of any redox behavior at the iron site in nitrile hydratase. Upon exposure to limited amount of dioxygen, 1 is converted to the bis-sulfinic species. The structure of the more stable O-bonded sulfinato complex (Et(4)N)[Fe(III)(PyP[SO(2)](2))] (2) has been determined. Six-coordinated low-spin cyanide adducts of the S-bonded and the O-bonded sulfinato complexes, namely, Na(2)[Fe(III)(PyP[SO(2)](2))(CN)] (4) and (Et(4)N)(2)[Fe(III)(PyP[SO(2)](2))(CN)] (5), afford green solutions in water and other solvents. The iron(II) complex (Et(4)N)(2)[Fe(II)(PyPS)] (3) has also been isolated and structurally characterized.     

Coordination algorithms control molecular architecture: [CuI4(L2)4]4+ grid complex versus [MII2(L2)2X4]y+ side-by-side complexes (M=Mn,Co, Ni,Zn; X=solvent or anion) and [FeII(L2)3][Cl3FeIIIOFeIIICl3

The synthesis and characterisation of a pyridazine-containing two-armed grid ligand L2 (prepared from one equivalent of 3,6-diformylpyridazine and two equivalents of p-anisidine) and the resulting transition metal (Zn, Cu, Ni, Co, Fe, Mn) complexes (1-9) are reported. Single-crystal X-ray structure determinations revealed that the copper(I) complex had self-assembled as a [2 x 2] grid, [Cu(I) (4)(L2)(4)][PF(6)](4).(CH(3)CN)(H(2)O)(CH(3)CH(2)OCH(2)CH(3))(0.25) (2.(CH(3)CN)(H(2)O)(CH(3)CH(2)OCH(2)CH(3))(0.25)), whereas the [Zn(2)(L2)(2)(CH(3)CN)(2)(H(2)O)(2)][ClO(4)](4).CH(3)CN (1.CH(3)CN), [Ni(II) (2)(L2)(2)(CH(3)CN)(4)][BF(4)](4).(CH(3)CH(2)OCH(2)CH(3))(0.25) (5 a.(CH(3)CH(2)OCH(2)CH(3))(0.25)) and [Co(II) (2)(L2)(2)(H(2)O)(2)(CH(3)CN)(2)][ClO(4)](4).(H(2)O)(CH(3)CN)(0.5) (6 a.(H(2)O)(CH(3)CN)(0.5)) complexes adopt a side-by-side architecture; iron(II) forms a monometallic cation binding three L2 ligands, [Fe(II)(L2)(3)][Fe(III)Cl(3)OCl(3)Fe(III)].CH(3)CN (7.CH(3)CN). A more soluble salt of the cation of 7, the diamagnetic complex [Fe(II)(L2)(3)][BF(4)](2).2 H(2)O (8), was prepared, as well as two derivatives of 2, [Cu(I) (2)(L2)(2)(NCS)(2)].H(2)O (3) and [Cu(I) (2)(L2)(NCS)(2)] (4). The manganese complex, [Mn(II) (2)(L2)(2)Cl(4)].3 H(2)O (9), was not structurally characterised, but is proposed to adopt a side-by-side architecture. Variable temperature magnetic susceptibility studies yielded small negative J values for the side-by-side complexes: J=-21.6 cm(-1) and g=2.17 for S=1 dinickel(II) complex [Ni(II) (2)(L2)(2)(H(2)O)(4)][BF(4)](4) (5 b) (fraction monomer 0.02); J=-7.6 cm(-1) and g=2.44 for S= 3/2 dicobalt(II) complex [Co(II) (2)(L2)(2)(H(2)O)(4)][ClO(4)](4) (6 b) (fraction monomer 0.02); J=-3.2 cm(-1) and g=1.95 for S= 5/2 dimanganese(II) complex 9 (fraction monomer 0.02). The double salt, mixed valent iron complex 7.H(2)O gave J=-75 cm(-1) and g=1.81 for the S= 5/2 diiron(III) anion (fraction monomer=0.025). These parameters are lower than normal for Fe(III)OFe(III) species because of fitting of superimposed monomer and dimer susceptibilities arising from trace impurities. The iron(II) centre in 7.H(2)O is low spin and hence diamagnetic, a fact confirmed by the preparation and characterisation of the simple diamagnetic iron(II) complex 8. M?ssbauer measurements at 77 K confirmed that there are two iron sites in 7.H(2)O, a low-spin iron(II) site and a high-spin diiron(III) site. A full electrochemical investigation was undertaken for complexes 1, 2, 5 b, 6 b and 8 and this showed that multiple redox processes are a feature of all of them.