Laser ablation generation of cluster ions from concentrated sulfuric and selenic acids

The generation and identification of novel homo- and hetero-polyacid clusters was achieved using a standard matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometer. The formation of several singly charged species was achieved via the interaction of a laser beam with concentrated sulfuric acid, selenic acid or their mixtures, applied on a graphite microcrucible. A higher yield of the species was observed in the negative detection mode, where sulfuric acid adducts HSO(4) (-) . mH(2)SO(4) (m = 0-3) and HSO(4) (-) . mH(2)SO(4) . SO(3) (m = 1, 2), and selenic acid adducts HSeO(4) (-), HSeO(4) (-) . X (X = SeO(3), H(2)SeO(4), 2SeO(3), H(2)SO(4) . SeO(3)) and NaSeO(4) (-). Y (Y = H(2)SeO(4), H(2)SeO(4). SeO(3), 2H(2)SO(4), H(2)SeO(4) . 2SeO(3), 2H(2)SeO(4) . SeO(3), 3H(2)SeO(4)), were identified. In the mass spectra of the mixture of acids, besides the homo-polyacidic adducts, eleven mixed species containing both sulfuric and selenic acid molecules or ions were identified, of which the heaviest was found to correspond to NaSeO(4) (-) . H(2)SeO(4) . 3SO(3). The stoichiometry of the species was confirmed using isotopic pattern modeling.     

Investigation of in situ oxalate formation from 2,3-pyrazinedicarboxylate under hydrothermal conditions using nuclear magnetic resonance spectroscopy

We have investigated the assembly of a two-dimensional coordination polymer, Nd(2)(C(6)H(2)N(2)O(4))(2)(C(2)O(4))(H(2)O)(2), that has been prepared from the hydrothermal reaction of Nd(NO(3))(3)·6H(2)O and 2,3-pyrazinedicarboxylic acid (H(2)pzdc). In situ oxalate formation as observed in this system has been been investigated using (1)H and (13)C nuclear magnetic resonance spectroscopy, and a pathway for C(2)O(4)(2-) anion formation under hydrothermal conditions has been elucidated. The oxalate ligands found in Nd(2)(C(6)H(2)N(2)O(4))(2)(C(2)O(4))(H(2)O)(2) result from the oxidation of H(2)pzdc, which proceeds through intermediates, such as 2-pyrazinecarboxylic acid (2-pzca), 2-hydroxyacetamide, 3-amino-2-hydroxy-3-oxopropanoic acid, 2-hydroxymalonic acid, 2-oxoacetic acid (glyoxylic acid), and glycolic acid. The species are generated through a ring-opening that occurs via cleavage of the C-N bond of the pyrazine ring, followed by hydrolysis/oxidation of the resulting species.     

2D coordination polymers of macrocyclic oxamide with polycarboxylates: syntheses, crystal structures and magnetic properties

Five new 2D coordination polymers, [Co(nip)(CuL)(H(2)O)]·CH(3)OH (1), [Mn(ip)(NiL)]·0.63H(2)O (2), [Cu(ip)(CuL)] (3), [Mn(6)(CuL)(6)(btc)(4)(H(2)O)(4)]·7H(2)O (4), and [Cu(CuL)(Hbtc)(H(2)O)] (5)(ML, H(2)L = 2,3-dioxo-5,6,14,15-dibenzo-1,4,8,12-tetraazacyclo-pentadeca-7,13-diene; H(2)nip = 5-nitroisophthalic acid; H(2)ip = m-isophthalic acid; H(3)btc = 1,3,5-benzenetricarboxylic acid) have been synthesized by a solvothermal method and characterized by single-crystal X-ray diffraction. Complexes 1-5 exhibit different 2D layered structures formed by Co(2)Cu(2) (1), Mn(2)Ni(2) (2), Cu(4) (3), Mn(3)Ni(3) (4), Cu(4) (5) units, respectively, via the oxamide and diverse carboxylic acid bridges. Compounds 1, 2, 3 and 5 are uninodal 4-connected (4, 4)-grids topology, while complex 4 possesses a 2D network with (3, 4)-connected (4(2).8)(4)(4(3).6(2).8)(3) topology. The results of magnetic determination show pronounced antiferromagnetic interactions in 1-4.     

Toward a magnetostructural correlation for a family of Mn6 SMMs

We have structurally and magnetically characterized a total of 12 complexes based on the Single-Molecule Magnet (SMM) [MnIII6O2(sao)6(O2CH)2(MeOH) 4] (1) (where sao2- is the dianion of salicylaldoxime or 2-hydroxybenzaldeyhyde oxime) that display analogous structural cores but remarkably different magnetic behaviors. Via the use of derivatized oxime ligands and bulky carboxylates we show that it is possible to deliberately increase the value of the spin ground state of the complexes [Mn6O2(Me-sao)6(O2CCPh3)2(EtOH)4] (2), [Mn6O2(Et-sao)6(O2CCMe3)2(EtOH)5] (3), [Mn6O2(Et-sao)6(O2CPh2OPh)2(EtOH)4] (4), [Mn6O2(Et-sao)6(O2CPh4OPh)2(EtOH)4(H2O)2] (5), [Mn6O2(Me-sao)6(O2CPhBr)2(EtOH)6] (6), [Mn6O2(Et-sao)6(O2CPh)2(EtOH)4(H2O)2] (7), [Mn6O2(Et-sao)6{O2CPh(Me)2}2(EtOH)6] (8), [Mn6O2(Et-sao)6(O2C11H15)2(EtOH)6] (9), [Mn6O2(Me-sao)6(O2C-th)2(EtOH)4(H2O)2] (10), [Mn6O2(Et-sao)6(O2CPhMe)2(EtOH)4(H2O)2] (11), and [Mn6O2(Et-sao)6(O2C12H17)2(EtOH)4(H2O)2] (12) (Et-saoH2 = 2-hydroxypropiophenone oxime, Me-saoH2 = 2-hydroxyethanone oxime, HO2CCPh3 = triphenylacetic acid, HO2CCMe3 = pivalic acid, HO2CPh2OPh = 2-phenoxybenzoic acid, HO2CPh4OPh = 4-phenoxybenzoic acid, HO2CPhBr = 4-bromobenzoic acid, HO2CPh(Me)2 = 3,5-dimethylbenzoic acid, HO2C11H15 = adamantane carboxylic acid, HO2C-th = 3-thiophene carboxylic acid, HO2CPhMe = 4-methylbenzoic acid, and HO2C12H17 = adamantane acetic acid) in a stepwise fashion from S = 4 to S = 12 and, in-so-doing, enhance the energy barrier for magnetization reorientation to record levels. The change from antiferromagnetic to ferromagnetic exchange stems from the "twisting" or "puckering" of the (-Mn-N-O-)3 ring, as evidenced by the changes in the Mn-N-O-Mn torsion angles.     

载体和担载酸对乙烯直接氧化合成乙酸反应的影响

 在固定床流动反应器上研究了Pd－酸／载体体系催化乙烯直接氧\r\n化合成乙酸的反应，并对载体相同但担载酸强度不同的催化剂的催化活\r\n性进行了比较．结果表明，担载酸的强度明显影响催化剂的活性，酸强\r\n度越大其催化活性越高．用NH3－TPD和异丙醇脱水探针反应表征了二氧\r\n化硅、活性碳和酸性白土三种载体担载的Pd－H4SiW12催化剂的酸性，\r\n并测试了三种催化剂的催化活性．结果表明，载体通过影响担载酸的强\r\n度而影响催化剂的活性，载体上的强酸中心越多，催化剂的活性越高．\r\n测定了二氧化硅、活性碳和酸性白土三种载体担载的Pd－H4SiW12催化\r\n剂上Pd的分散度，并与其催化活性相关联．结果表明，决定乙烯直接氧\r\n化生成乙酸反应活性的主要因素是催化剂的酸强度而不是Pd的分散度．     

Synthesis of boroxine-linked aluminum complexes

The reaction of LAlH(2) (L = HC(CMeNAr)(2), Ar = 2,6-iPr(2)C(6)H(3)) (1) with 3-methylphenylboronic acid and 3-fluorophenylboronic acid resulted in the boroxine-linked aluminum compounds LAl[OB(3-CH(3)C(6)H(4))](2)(μ-O) (2) and LAl[OB(3-FC(6)H(4))](2)(μ-O) (3), respectively. LAl[OB(2-PhC(6)H(4))(OH)](2) (4) was synthesized by the reaction of 1 with 2-biphenylboronic acid. Compound 4 is the intermediate analogue to those, which we postulated for the formation of 2 and 3. The reaction of 1 with 3-hydroxyphenylboronic acid resulted in the first metal benzoboroxole oxide LAl[OB(o-CH(2)O)C(6)H(4)](2) (5), which is formed from a compound with B-(OH)(2) and C-OH functionalities.     

二茂钛氨基酸配合物的合成新方法

二茂钛衍生物在催化烯烃聚合、氢化、异构化等领域具有重要应用价值[1] ,同时 ,因该类衍生物还具有良好的抗癌性能 ,且其毒性远远低于顺铂类化合物[2 ] ,使人们对这类配合物的研究一直非常重视 .有文献报道 [3] ,以具有生物活性的配体取代二氯二茂钛中的氯原子 ,可以改善其生物利用率 ,提高二茂钛的抗癌活性 .二茂钛配合物的合成绝大多数都是在无水无氧的有机相中进行的 ,在两相(水相 /有机相 ) [4 ,5] 中则很少 .我们曾经在有机相和水相中合成了一些新的二茂钛氨基酸配合物 [6] ,但操作繁杂 ,反应速度慢 ,影响因素多 ,产率低等是这两种体系…     

Synthetic and structural comparisons of bismuth(III) carboxylates synthesised under solvent-free and reflux conditions

Two synthetic approaches to the formation of bismuth(III) carboxylates have been explored and compared. Ph(3)Bi was reacted with a series of carboxylic acids (RCO(2)H) of varying pK(a) and functionality (R = PhCH[double bond, length as m-dash]CH, o-MeOC(6)H(4), m-MeOC(6)H(4), o-H(2)NC(6)H, o-O(2)NC(6)H(4), p-O(2)NC(6)H(4), 2-(C(5)H(4)N)) under reflux conditions in toluene and solvent-free. The thermochemical profiles of the solvent-free reactions were also studied by DSC-TGA. All reactions produced the tri-substituted bismuth carboxylates in comparable yields and purity with the exceptions of picolinic acid and p-nitrobenzoic acid. 2-Picolinic acid exclusively formed the di-substituted complex, [PhBi(2-(C(5)H(4)N)CO(2))(2)](4), by both methods, while p-nitrobenzoic acid gave the tri-substituted complex through reflux and the di-substituted complex under solvent-free conditions. Two of the complexes were structurally authenticated by single crystal X-ray diffraction: [PhBi(2-(C(5)H(4)N)CO(2))(2)](4) is tetrameric formed through five membered chelate rings involving the pyridyl N and O(-C) rather than the less stable carboxylate (-CO(2)) chelates, while [Bi(o-MeOC(6)H(4)CO(2))(3)](infinity), is a polymer in which dimeric units, constructed around two chelating and one unsymmetrical bridging carboxylate on each Bi centre, are then joined together through longer intermolecular Bi-O bridging bonds.     

Series of metal organic frameworks assembled from Ln(III), Na(I), and chiral flexible-achiral rigid dicarboxylates exhibiting tunable UV-vis-IR light emission

Two series of isoreticular chiral metal-organic frameworks assembled from Ln(III) (Ln = Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb), Na(I), and chiral flexible-achiral rigid dicarboxylate ligands, formulated as [NaLn(Tart)(BDC)(H(2)O)(2)] (S1) and [NaLn(Tart)(biBDC)(H(2)O)(2)] (S2) (H(2)Tart = tartaric acid; H(2)BDC = terephthalic acid; H(2)biBDC = biphenyl-4,4'-dicarboxylic acid), were obtained as single phases under hydrothermal conditions. The compounds have been studied by single-crystal and powder X-ray diffraction, thermal analyses (TG-MS and DSC), vibrational spectroscopy (FTIR), scanning electron microscopy (SEM-EDX), elemental analysis, and X-ray thermodiffractometry. The catalytic activity has been also investigated. The photoluminescence properties of selected compounds have been investigated, exhibiting room temperature tunable UV-vis-IR light emission.     

Fragmentation of the deprotonated ions of peptides containing cysteine, cysteine sulfinic acid, cysteine sulfonic acid, aspartic acid, and glutamic acid

We examined the fragmentation of the electrospray-produced [M-H]- and [M-2H]2- ions of a number of peptides containing two acidic amino acid residues, one being aspartic acid (Asp) or glutamic acid (Glu), and the other being cysteine sulfinic acid [C(SO2H)] or cysteine sulfonic acid [C(SO3H)], on an ion-trap mass spectrometer. We observed facile neutral losses of H2S and H2SO2 from the side chains of cysteine and C(SO2H), respectively, whereas the corresponding elimination of H2SO3 from the side chain of C(SO3H) was undetectable for most peptides that we investigated. In addition, the collisional activation of the [M-H]- ions of the C(SO2H)-containing peptides resulted in the cleavage of the amide bond on the C-terminal side of the C(SO2H) residue. Moreover, collisional activation of the [M-2H]2- ions of the above Asp-containing peptides led to the cleavage of the backbone N-Calpha bond of the Asp residue to give cn and/or its complementary [zn-H2O] ions. Similar cleavage also occurred for the singly deprotonated ions of the otherwise identical peptides with a C-terminal amide functionality, but not for the [M-H]- ions of same peptides with a free C-terminal carboxylic acid. Furthermore, ab initio calculation results for model cleavage reactions are consistent with the selective cleavage of the backbone N-Calpha bond in the Asp residue.     

Zn(II) and Cd(II) coordination polymers assembled by di(1H-imidazol-1-yl)methane and carboxylic acid ligands

Five new Zn(II)/Cd(II) coordination polymers constructed from di(1H-imidazol-1-yl)methane (L) mixed with different auxiliary carboxylic acid ligands formulated as [Zn(L)(H(2)L(1))(2)·(H(2)O)(0.2)](n) (1), {[Zn(L)(L(2))]·H(2)O}(n) (2), {[Cd(2)(L)(2)(L(2))(2)]·2H(2)O}(n) (3), {[Cd(L)(L(3))]·H(2)O}(n) (4) and [Cd(L)(L(4))](n) (5) (H(3)L(1) = 1,3,5-benzenetricarboxylic acid, H(2)L(2) = 4,4'-oxybis(benzoic acid), H(2)L(3) = m-phthalic acid and H(2)L(4) = p-phthalic acid) have been synthesized under hydrothermal conditions and structurally characterized. Four related auxiliary carboxylic acids were chosen to examine the influences on the construction of these coordination frameworks with distinct dimensionality and connectivity. The coordination arrays of 1-5 vary from 1D zigzag chain for 1, 2D (4,4) layer for 2-4, to 2-fold interpenetrated 3D coordination network with the α-Po topology for 5. The thermal and photoluminescence properties of complexes 1-5 in the solid state have also been investigated.     

Synthesis and Crystal Structure of a Lanthanum(III) Complex with Chelidamic Acid

A new lanthanum complex, (H3O)2[La(C7H3NO5)2(H2O)2]2·3(H2O) or (H3O)2[La(HChel)2(H2O)2]2·3(H2O) 1 (H3Chel = 4-hydroxypyridine-2,6-dicarboxylic(chelidamic) acid), has been prepared by the hydrothermal reaction, and its crystal structure was determined based on single-crystal diffraction data. Compound 1 crystallizes in triclinic, space group P with a = 9.6939(19), b = 10.176(2), c = 11.502(2) (A), α = 111.52(3), β = 93.74(3), γ = 103.33(3)°, V = 1013.0(3) (A)3, Dc = 1.912 g/cm3, Z = 1, Mr = 1166.40, μ = 2.188 mm-1, λ(MoKα) = 0.71073 (A) and F(000) = 574. The final R = 0.0342 and wR = 0.0737 for 4080 observed reflections with I > 2σ(I), and R = 0.0429 and wR = 0.0772 for all data. Compound 1 contains two lanthanum ions, four chelidamic acid ligands, four coordinated water molecules, two hydroniums, and three discrete water molecules. The LaIII atom is ten-coordinated by four oxygen and two nitrogen atoms from two tridentate chelating chelidamic acid ligands, two carboxylic oxygen atoms from an adjacent chelidamic acid ligand and two coordinated water molecules, leading to a distorted dodecahedral geometry. A three-dimensional network is formed by H-bonds.     

钨酸催化氧化环己烯合成己二酸

以钨酸为催化剂,过氧化氢为氧化剂,催化氧化环己烯(1)合成了己二酸（2）,其结构经¹H NMR和IR确证。采用正交实验法研究了过氧化氢浓度、钨酸用量和磷酸用量对2收率的影响。采用单因素法考察了酸性助剂,过氧化氢用量及其加料方式对收率的影响。结果表明：在最佳反应条件［n(H₂O₂)：n(1)：n(钨酸)=4.6 ：1.0：0.06, w(H₂O₂)=27.5%,回流反应1.7 h］下,2收率95.1%,纯度99.2%。     

Hydrogen—deuterium exchange at non-labile sites: A new reaction facet with broad implications for structural and dynamic determinations

Hydrogen-deuterium exchange at non-labile sites is reported. The conjugate bases of isophthalic acid (m-C6H4(CO2H)2), 2-oxoglutaric acid (HO2CCOCH2CH2CO2H), and 2-methylisophthalic acid (2-CH3-1,3-C6H4(CO2H)2) undergo scrambling with 1, 2, and 3 carbon-centered hydrogens under a variety of conditions. Likewise, protonated 2-(m-methoxyphenyl)-ethylamine ((m-CH3OC6H4)CH2CH2NH2) undergoes up to 5 H/D exchanges upon gentle activation whereas the conjugate acid of 2-phenylethylamine (C6H5CH2CH2NH2) requires the presence of ammonia-d3 in order to be pushed to undergo up to 8 H/D exchanges. The very act of electrospraying ions can result in extensive movement of deuterium to carbon centers and, in some cases, could not be prevented. These findings offer great promise for future exploitation but also suggest that the interpretation of many H/D exchange experiments using mass spectrometry as the analytical tool could be in error.     

A structure-activity relationship study of compounds with antihistamine activity

A structure-activity relationship (SAR) analysis of H(1)-, H(2)- and H(3)-antihistamine activity was carried out and chromatographic data of 2-[2-(phenylamino)thiazol-4-yl]ethanamine, 2-(2-benzyl-4-thiazolyl)ethanamine, 2-(2-benzhydrylthiazol4-yl)ethanamine, 2-(1-piperazinyl- and 2-(hexahydro-1H-1,4-diazepin-1-yl)benzothiazole, 2-(1-piperazinyl)benzothiazole, 2-[4-(1-alkyl)piperidinyl]benzothiazole, 2-(N,N',N'-dimethylalkyl-1,2-ethanediamino)benzothiazole, 2[1-(4-aminopiperidinyl)]benzothiazole, 2-[2-phenyl-4-thiazolyl]ethanamine derivatives and selected H(1)- and H(2)-antihistamine drugs were obtained. NP TLC and RP2 TLC plates (silica gel NP 60F(254) and silica gel RP2 60F(254) silanized precoated), impregnated with a solution of aspartic acid (L-Asp) and a solution of an analogue of aspartic acid (propionic acid), were used in two developing solvents as H(1)-, H(2)- and H(3)-antihistaminic interaction models. The lipophilicity data of the examined compounds were obtained and used in the SAR assay. Biochromatographic tests using TLC plates impregnated with solutions of asparic acid or propionic acid were found to be a source of useful data for the qualitative analysis of compounds with different structures, demonstrating activity to histamine H(1)-, H(2)- and H(3)-receptors. The four presented discriminant models based on biochromatographic studies are an efficient tool in the SAR analysis for initial prediction of compound activity direction within histamine receptors.     

Singularity of proton transport in salts of orthoperiodic and orthotellurium acids: theoretical modeling using density functional calculations

Density functional B3LYP calculations have been performed to investigate proton transport in orthoperiodic and orthotellurium acids, their salts MIO(6)H(4)(M = Li, Rb, Cs) and CsH(5)TeO(6), dimers of the salt*acid type MIO(6)H(4)*H(5)IO(6)(M = Rb, Cs), CsIO(6)H(4)*H(6)TeO(6), CsHSO(4)*H(6)TeO(6), Cs(2)SO(4)*H(6)TeO(6), and also in double-substituted and binary salts Rb(2)H(3)IO(6) and Rb(4)H(2)I(2)O(10). It has been shown that the energy of salt dimerization is 33-35 kcal mol(-1) and the activation barrier for proton migration between the neighboring octahedrons of the salt*acid --> acid*salt type is calculated to be 3-13 kcal mol(-1). The activation energy of the proton migration along the octahedron, 20-30 kcal mol(-1), is comparable with the barrier for water molecule separation. Quantum-chemical calculations correlate with the results of X-ray and electrochemical studies.     

Synthesis and Crystal Structure of a Lanthanum（Ⅲ） Complex with Chelidamic Acid

A new lanthanum complex, （H3O）2[La（C7H3NO5）2（H2O）212.3（H2O） or （HaO）E[La（HChel）2（HEO）E]2.3（H2O） 1 （H3Chel = 4-hydroxypyridine-2,6-dicarboxylic（chelidamic） acid）, has been prepared by the hydrothermal reaction, and its crystal structure was determined based on single-crystal diffraction data. Compound I crystallizes in triclinic, space group Pi with a = 9.6939（19）, b = 10.176（2）, c = 11.502（2）A, α = 111.52（3）, β = 93.74（3）, γ = 103.33（3）°, V = 1013.0（3）A3, Dc = 1.912 g/cm3, Z = 1, Mr = 1166.40, p = 2.188 mm-1, 2（MoKa） = 0.71073 A and F（000） = 574. The final R = 0.0342 and wR = 0.0737 for 4080 observed reflections with I 〉 2σ（I）, and R = 0.0429 and wR = 0.0772 for all data. Compound 1 contains two lanthanum ions, four chelidamic acid ligands, four coordinated water molecules, two hydroniums, and three discrete water molecules. The LaⅢ atom is ten-coordinated by four oxygen and two nitrogen atoms from two tridentate chelating chelidamic acid ligands, two carboxylic oxygen atoms from an adjacent chelidamic acid ligand and two coordinated water molecules, leading to a distorted dodecahedral geometry. A three-dimensional network is formed by H-bonds.     

二丁基锡磺酸酯催化酯交换合成碳酸二苯酯

研究了不同类型的酸催化剂对碳酸二甲酯与苯酚酯交换合成碳酸二苯酯的影响. 实验结果表明, 碳酸二甲酯与苯酚的酯交换反应是软碱(酚氧)亲硬酸(羰基碳)的反应; 硬Lewis酸比软Lewis酸、交界Lewis酸和Brönsted酸有更高的酯交换选择性. 将不同的磺基引入n-Bu₂SnO分子中, 制得一系列硬Lewis酸催化剂[n-Bu₂Sn(OH)OS(O)₂R(H₂O)]₂[R=p-NH₂C₆H₄(Ⅰ), p-CH₃C₆H₄(Ⅱ), C₆H₅(Ⅲ), p-ClC₆H₄(Ⅳ), Me(Ⅴ), CF₃(Ⅵ)]. 在酯交换反应中, 由于磺基的强吸电子效应增强了[n-Bu₂Sn(OH)OS(O)₂R(H₂O)]₂中Sn的Lewis酸性, 其催化活性比n-Bu₂SnO的高, 而且磺基上取代基的吸电子效应越强, 催化剂中Sn的Lewis酸性越强, 催化活性越高, 但取代基的吸电子效应过强会降低其对酯交换反应的选择性.     

N-heterocycle chelated oxomolybdenum(VI and V) complexes with bidentate citrate

A 1,10-phenanthroline (phen) chelated molybdenum(VI) citrate, [(MoO2)2O(H2cit)(phen)(H2O)2] x H2O (1) (H4cit = citric acid), is isolated from the reaction of citric acid, ammonium molybdate and phen in acidic media (pH 0.5-1.0). A citrato oxomolybdenum(V) complex, [(MoO)2O(H2cit)2(bpy)2] x 4H2O (2), is synthesized by the reduction of citrato molybdate with hydrazine hydrochloride in the presence of 2,2'-bipyridine (bpy), and a monomeric molybdenum(VI) citrate [MoO2(H2cit)(bpy)] x H2O (6) is also isolated and characterized structurally. The citrate ligand in the three neutral compounds uses the alpha-alkoxy and alpha-carboxy groups to chelate as a bidentate leaving the two beta-carboxylic acid groups free, that is different from the tridentate chelated mode in the citrato molybdate(VI and V) complexes. 1 and in solution show obvious dissociation based on 13C NMR studies.     

Synthesis of nitrosylruthenium complexes containing 2,2':6',2"-terpyridine by reactions of alkoxo complexes with acids

Nitrosylruthenium complexes containing 2,2':6',2"-terpyridine (terpy) have been synthesized and characterized. The three alkoxo complexes trans-(NO, OCH3), cis-(Cl, OCH3)-[RuCl(OCH3)(NO)(terpy)]PF6 ([2]PF6), trans-(NO, OC2H5), cis-(Cl, OC2H5)-[RuCl(OC2H5)(NO)(terpy)]PF6 ([3]PF6), and [RuCl(OC3H7)(NO)(terpy)]PF6 ([4]PF6) were synthesized by reactions of trans-(Cl, Cl), cis-(NO, Cl)-[RuCl2(NO)(terpy)]PF6 ([1]PF6) with NaOCH3 in CH3OH, C2H5OH, and C3H7OH, respectively. Reactions of [3]PF6 with an acid such as hydrochloric acid and trifluoromethansulforic acid afford nitrosyl complexes in which the alkoxo ligand is substituted. The geometrical isomer of [1]PF6, trans-(NO, Cl), cis-(Cl, Cl)-[RuCl2(NO)(terpy)]PF6 ([5]PF6), was obtained by the reaction of [3]PF6 in a hydrochloric acid solution. Reaction of [3]PF6 with trifluoromethansulforic acid in CH3CN gave trans-(NO, Cl), cis-(CH3CN, Cl)-[RuCl(CH3CN)(NO)(terpy)]2+ ([6]2+) under refluxing conditions. The structures of [3]PF6, [4]PF6.CH3CN, [5]CF3SO3, and [6](PF6)2 were determined by X-ray crystallograpy.