Photolysis of a fluorinated polymer film by vacuum ultraviolet radiation

We studied the photolysis of a fluoroethylene–fluoropropylene copolymer (FEP) film by vacuum ultraviolet (VUV) radiation from a resonance Xe lamp at a wavelength of 147 nm and air pressures of 0.05 and 2.5 Torr. The chemical changes in the FEP surface layer were investigated by Fourier-transform infrared spectroscopy with attenuated total reflection attachment and X-ray photoelectron spectroscopy. Double bonds were found to be the main product in the case of VUV treatment at 0.05 Torr, while photo-oxidation of FEP occurred predominantly by VUV treatment at 2.5 Torr under formation of the —CF₂C(O)F group. This oxygen-containing group was more effectively formed in the FEP surface layer by VUV photo-oxidation than by conventional surface oxidation techniques such as treatments by plasma and corona discharge and ozone. Storage of the VUV-treated polymers in air at 50% relative humidity resulted in hydrolysis of —CF₂C(O)F to the —CF₂COOH group. Substantial improvement of the film wettability was noticed after VUV photo-oxidation. These findings suggest that VUV irradiation provides a high potential for surface modification of fluorinated polymers which are known to be particularly resistant against functionalization by conventional surface modification techniques such as plasma treatment. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2215–2222, 1998     

Surface immobilization of poly(ethylene oxide): Structure and properties

We covalently immobilized poly(ethylene oxide) (PEO) chains onto a fluorinated ethylene propylene copolymer (FEP) surface. On the FEP surface, aldehyde groups were first deposited by plasma polymerization of acetaldehyde or acrolein. Then, amino‐PEO chains were immobilized through Schiff base formation, which was followed by reduction stabilization with sodium cyanoborohydride. The PEO‐grafted polymer surfaces thus prepared were characterized by X‐ray photoelectron spectroscopy (XPS), atomic force microscopy, contact‐angle measurements, and protein adsorption. The dramatic increase in the C O intensity of the high‐resolution XPS C 1s spectrum, together with an overall increase in oxygen content, indicated the successful attachment of PEO chains onto the acetaldehyde plasma surfaces. The amount of grafted PEO chains depended on the superfacial density of the plasma‐generated aldehyde groups. The grafted monoamino‐PEO chains formed a brushlike structure on the polymer surface, whereas the bisamino‐PEO chains predominately adopted a looplike conformation. The PEO surface had a regular morphology with greater roughness than the aldehyde surface underneath. Surface hydrophilicity increased with the grafting of PEO. Also, the bisamino‐PEO‐grafted surface had slightly higher surface hydrophilicity than its monoamino‐PEO counterpart. These PEO coatings reduced fibrinogen adsorption by 43% compared with the substrate FEP surface. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2323–2332, 2000     

Surface characterization of atomic oxygen beam-exposed polyimide films using contact angle measurements

Polyimide surfaces exposed to simulated low Earth orbit space environment, i.e., under hyperthermal atomic oxygen bombardment, were characterized by using atomic force microscopy, X-ray photoelectron spectroscopy, and contact angle measurements. The surface analytical results showed that the roughness and the O/C ratio at the atomic oxygen-exposed polyimide surface increased with increasing atomic oxygen fluence. The advancing and receding contact angles decreased with increasing O/C ratios at the polyimide surfaces. The Lifshitz-van der Waals component, the acid and base parameters of the surface free energy of polyimide films were calculated from the contact angles. The base parameter increased with increasing O/C ratio, whereas the acid parameter and the Lifshitz-van der Waals component did not show a remarkable change. These analytical results agree with the in situ XPS data showing the formation of surface functional groups due to atomic oxygen exposure. It was demonstrated in this study that the polyimide surface in a low Earth orbit space environment may become hydrophilic due to the bombardment by atomic oxygen. Received: 4 December 1999 Accepted: 31 August 2000     

Electron spin resonance study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent. V. Comparison with polypropylene and ethylene‐propylene copolymer

We studied the chemical reaction process of polypropylene (PP), ethylene‐propylene copolymer (EPM), and ethylene‐propylene‐diene copolymer (EPDM) crosslinking induced by dicumyl peroxide (DCP) using electron spin resonance (ESR). Free radicals appeared at an elevated temperature of around 120 °C and the behavior and kinetics of the reaction process were observed at 180 °C. The radical species detected in PP were alkyl type radicals, formed by the abstraction of hydrogen atoms from the tertiary carbon of polymer chains. For EPDM containing a diene component, the radicals were trapped at double bonds in this diene component to form allyl radicals. The resolutions of these spectra were extremely clear; hence, isotropic spectra of these polymer radicals were obtained. We measured the ESR at high temperatures and confirmed that the process of crosslinking induced by DCP was a free radical reaction. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3383–3389, 2000     

Electron-beam-induced conduction in fluorinated ethylene propylene copolymer and its acrylonitrile graft copolymer

Electron-beam-induced conductivity (EBIC) studies were carried out on fluorinated ethylene propylene copolymer (FEP) and its acrylonitrile graft copolymer (FEP-g-AN). The current transport parallel to the surface under the influence of an electron beam of medium energy (6–30 keV) is reported. The gain in EBIC is calculated and its characteristic variation as a function of beam energy is studied. Minima in the gain versus energy curves have been obtained around 21 keV for FEP, 12 and 18 keV for FEP-g-AN, and 12 keV for polyacrylonitrile (PAN). This behavior is explained by assuming the existence of electron trapping bands close to the surface, at characteristic distances below the surface of the polymeric film corresponding to the range of incident electrons. Gains of the order of 5, 12, and 30 have been obtained respectively for FEP, FEP-g-AN, and PAN for the maximum energy of incident electrons used.     

Effect of block length on the self-assembly of end-capping perfluoroalkyl moieties on the polymer surface

Most research on copolymers with fluorinated monomers has focused on the relationship between fluorinated monomer content and the corresponding surface structure. However, the influence of the non-fluorinated block on the surface structure of the copolymer film is unknown. Various molecular weight poly(butyl methacrylates) (PBMA) end-capped with 2-perfluorooctylethyl methacrylate (FMA) units (PBMA-ec-FMA) have been synthesized by atom transfer radical polymerization (ATRP). The effect of the PBMA block length on the surface structure and properties of the polymers both in the solid state and in solution was investigated using various techniques. X-ray photoelectron spectroscopy (XPS), sum frequency generation (SFG) vibrational spectroscopy and X-ray diffraction (XRD) analyses indicated that longer PBMA blocks enhanced both the enrichment of the fluorinated moieties and the order of the packing orientation of the perfluoroalkyl side chains on the surface. This enhancement was attributed mainly to the molecular aggregate structure of the end-capped polymers with long PBMA blocks in the solution and to the interfacial structure at the air/liquid interface, which favors the -(CF₂)₇CF₃ moieties self-assembling on the polymer surface during film formation. This observation suggests that the polyacrylate block structure in fluorinated diblock copolymers, in addition to the fluorinated monomer content, plays an important role in structure formation on the solid surface.     

Vacuum-ultraviolet induced oxidation of the polymers polyethylene and polypropylene

The emission from low-pressure microwave plasmas in the vacuum-ultraviolet (VUV) region (λ < 200 nm) was investigated in order to use these plasmas as light sources for the study of the VUV photochemistry of polyethylene (PE) and polypropylene (PP) as part of the study of plasma-polymer interaction. These polymers, immersed in low-presure oxygen, were exposed to radiation with wavelengths down to 112 nm, the cut off of magnesium fluoride used as a window to separate the polymer specimen from the plasma light source. Total oxygen incorporation in the surface [O], and the formation of hydroxyl, carbonyl, and carboxyl groups were measured using XPS in combination with chemical derivatizations, particularly their dependence upon the radiation spectrum and the oxygen pressure around the sample. In most experiments the surface oxygen concentration [O] attained a constant value that appears to be related to the initial oxidation rate; this suggests a competition between oxygen incorporation and chain scission reactions, followed by the removal of volatile oxidation products. PE is usually oxidized to a higher level than PP, the latter appearing to be more susceptible to reaction with atomic oxygen than PE. A general initiation mechanism for the VUV experiments is proposed that allows us to explain the observed differences in behavior between PE and PP, and the results obtained under different irradiation conditions. The nature of oxidation products is in both cases very similar to what is observed after direct plasma treatment of the polymers. We conclude that short wavelength radiation contributes very appreciably to the observed surface modification effects during plasma treatment of PE and PP. © 1995 John Wiley & Sons, Inc.     

Photocontrol of cell adhesion and proliferation by a photoinduced cationic polymer surface

In this study photoinduced cation generation, based on the photochemical properties of malachite green (MG), was used for the surface design and in vitro photochemical control of cell adhesion and proliferation. The MG-derivatized surface was prepared by coating a photoreactive polymer as a substrate onto a poly(ethylene terephthalate) (PET) sheet. The photoreactive polymer was radical copolymer of styrene with the MG-derivatized monomer diphenyl(4-vinylphenyl)methane leucohydroxide (degree of substitution of MG unit: 12.4 mol%). Water contact angle measurements and X-ray photoelectron spectroscopy revealed high hydrophobicity and homogeneous distribution of the MG groups on the outermost surface of the coated film, respectively. When the coated film was exposed to ultraviolet light (UV) irradiation at wavelengths of 290-410 nm, a time-dependent color change of the film was observed from pale yellow, before irradiation, to green. These results indicated generation of cations on the film surface by photochemical cation generation of the MG groups, which was quantitatively characterized by force versus distance curves measurements in atomic force microscopic (AFM) observation using a carboxylated AFM tip. The seeding and culture of endothelial cells showed a marked reduction in adhesion on the nonirradiated coated film surface, whereas the UV-irradiated surface promoted cell adhesion and proliferation except for incubation in serum-free medium, which was similar to commercial tissue culture PET sheet. These observations may be due to adsorption of cell adhesive proteins, typified by fibronectin, in serum-containing medium onto the cationized photoreactive copolymer surface by electrostatic interactions.     

The effect of low earth orbit atomic oxygen exposure on phenylphosphine oxide-containing poly(arylene ether)s

Unoriented thin films of phenylphosphine oxide-containing poly(arylene ether)s were exposed to low Earth orbit aboard the space shuttle Atlantis (STS-51) as part of a flight experiment designated Limited Duration Candidate Exposure (LDCE 4–5). The samples were exposed to primarily atomic oxygen (!10,\7×10¹⁹ atoms/cm²). Based on post-flight analyses using atomic force microscopy, X-ray photoelectron spectroscopy, gel permeation chromatogrpahy and weight loss data, it was proposed that atomic oxygen exposure of these materials produces a phosphate layer at the surface of the samples, apparently by the reaction of atomic oxygen with the phosphorus in the polymer backbone. Ground-based oxygen plasma exposure experiments have previously shown that this phosphate layer provides a barrier against further attack by atomic oxygen [1]. The results obtained from these analyses compare favorably with those obtained from samples exposed to an oxygen plasma in ground-based exposure experiments [1]. © 1998 John Wiley & Sons, Ltd.     

Evaluation of piezoelectric PVDF polymers for use in space environments. II. Effects of atomic oxygen and vacuum UV exposure

The effects of atomic oxygen (AO) and vacuum UV radiation simulating low Earth orbit conditions on two commercially available piezoelectric polymer films, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride‐trifluoroethylene) P(VDF‐TrFE), have been studied. Surface erosion and pattern development are significant for both polymers. Erosion yields were determined as 2.8 × 10^?24 cm³/atom for PVDF and 2.5 × 10^?24 cm³/atom for P(VDF‐TrFE). The piezoelectric properties of the residual material of both polymers were largely unchanged after exposure, although a slight shift in the Curie transition of the P(VDF‐TrFE) was observed. A lightly cross‐linked network was formed in the copolymer presumably because of penetrating vacuum ultraviolet (VUV) radiation, while the homopolymer remained uncross‐linked. These differences were attributed to varying degrees of crystallinity and potentially greater absorption, and hence damage, of VUV radiation in P(VDF‐TrFE) compared with PVDF. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2503–2513, 2005     

Aging and degradation of polyolefins. III. Polyethylene and ethylene–propylene copolymers

Rates of oxygen absorption and formation of oxidation products were determined in γ-initiated oxidations of thin films of high- and low-density polyethylene, atactic and isotactic polypropylene, and of three ethylene–propylene copolymers. Radiation yields G for O₂ absorbed and formation of hydroperoxides depend on dose rates and decrease sharply with increasing ethylene content of the copolymers and moderately with increasing crystallinity of any base polymer. G values for dialkyl peroxide and carbonyl formation, and therefore for chain initiation and termination, do not change much with polymer composition and crystallinity and not at all with dose rates. A few experiments with atactic polypropylene and an amorphous ethylene–propylene copolymer, initiated by di-tert-butylperoxy oxalate, indicate that 37 mole-% of ethylene in the polymer increases the efficiency of initiation and the tendency toward crosslinking.     

Increasing the Hydrophobicity of a PP Film Using a Helium/CF<Subscript>4</Subscript> DBD Treatment at Atmospheric Pressure

Plasma surface modification is widely used to tailor the surface properties of polymeric materials. Most treatments are performed using low pressure plasma systems, but recently, atmospheric dielectric barrier discharges (DBDs) have appeared as interesting alternatives. Therefore, in this paper, an atmospheric He + CF₄ DBD is used to increase the hydrophobicity of a polypropylene (PP) film. The surface characterization of the PP film is performed using contact angle measurements, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Results show that the hydrophobic properties of the polymer films are greatly enhanced after plasma treatment as evidenced by an increased contact angle. The incorporation of fluorine on the surface is significant (45 at%), demonstrating the ability of the used DBD set-up to generate fluorine-containing functional groups on the PP surface.     

Electron spin resonance study of copolymerization of hexafluoroisobutylene with vinylidene fluoride

The Copolymerization reaction of hexafluoroisobutylene (HFIB) and vinylidene fluoride (VF₂) was studied using X-band electron spin resonance (ESR) by applying a photo-in situ method. Owing to the toxicity of HFIB monomer, the flow ESR method could not be directly applied without extensive modification. The observed ESR signal with 21-line hyperfine structure was assigned to the copolymer radical with head-to-head configuration. Although the HFIB monomer radical possesses the same hyperfine pattern, the ambiguity has been removed by using CF₃ as an initiator radical. Owing to the high steady-state concentration of the observed copolymer radical with head-to-head configuration as well as the nature of the static photo-in situ ESR method, we believe the actual molecular configuration for HFIB/VF₂ copolymer must be head-to-tail. The observed hyperfine constant for A_βF = 1.74 mT suggests that the geometry for HFIB/VF₂ copolymer radicals with both head-to-head or head-to-tail configurations is possibly similar to that of (CF₃)₃C· radical. The small value for A_βH indicates steric hindrance to rotation about the C_α? C_β bond, and this is also supported by the experimental results of nonalteration in linewidth during the temperature dependence study from ?40 to about 90°C. Attempts to measure directly the monomer reactivities have been unsuccessful owing to the fact that not all the possible radicals were detected, but nevertheless the relative reactivities of VF₂ and HFIB could be estimated. The relative reactivities of VF₂ and HFIB monomers and the steric hindrance effect indicate that the conformation of the copolymer is head-to-tail; this has been further confirmed by infrared analysis.     

Surface-initiated Atom-transfer Radical Polymerization from Polyimide Films and Their Anti-fouling Properties

A simple one-step method for the chloromethylation of polyimide (PI) under mild conditions was used to introduce benzyl chloride groups into PI film surface. Covalently tethered hydrophilic polymer brushes of poly(ethylene glycol) monomethacrylate (PEGMA) and glycidyl methacrylate (GMA) were prepared via surface initiated atom-transfer radical polymerization (ATRP) from the chloromethylated PI surfaces using benzyl chloride groups as the active ATRP initiators. A kinetics study indicated that the chain growth from the films was in agreement with a controlled process. The dormant chain ends of the grafted polymer on the PI films could reinitiate the consecutive surface-initiated ATRP to prepare surface-functionalized diblock copolymer brushes on the PI films. The modified surface was characterized by X-ray photoelectron spectroscopy (XPS) after each modification stage. Protein adsorption experiments indicated that the PI-P(PEGMA) membrane exhibited substantially improved anti-fouling properties compared to the pristine PI surface.     

Structural characterization of radiation‐grafted block copolymer films,using SANS technique

We report small‐angle neutron scattering studies of grafted copolymer films of perfluorinated poly(ethylene propylene), FEP, base polymer and polystyrene, PS, grafted blocks. The films show highly anisotropic scattering patterns, revealing nematic‐like ordering of the crystalline domain structure as a consequence of the processing conditions. Upon grafting, the styrene swells the amorphous domains in the copolymer formation. For styrene content beyond roughly 15%, the amorphous regimes increase on the cost of crystalline domains. To stabilize the rather well‐defined domain structure already given by the original FEP base material, the samples need to be cross‐linked. Without cross‐linking, the nanometer length scale domains vanish, and some large scale structure takes over, likely driven by the immiscibility between FEP and PS. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1660–1668, 2008     

Ag改性纳米ZnO薄膜及光催化活性

采用溶胶-凝胶法和光还原沉积贵金属法结合制备出Ag改性的纳米ZnO薄膜。利用FESEM、XPS、ESR、UV-Vis分析了纳米Ag-ZnO薄膜的表面形貌、表面组成和光谱特征。FESEM分析表明银在纳米ZnO薄膜表面形成原子簇而没有形成均匀覆盖层。XPS分析表明负载在纳米ZnO薄膜表面的银以Ag⁰形式存在; 相对于纳米ZnO薄膜, 纳米Ag-ZnO薄膜中晶格氧的含量有所下降,而表面羟基氧和吸附氧的含量显著增加。纳米Ag-ZnO薄膜的ESR峰强比纳米ZnO薄膜大,表明纳米Ag-ZnO薄膜中束缚单电子的氧空位的浓度高于纳米ZnO薄膜。UV-Vis分析纳米Ag-ZnO薄膜的紫外可见吸收光谱可能是纳米银粒子与纳米ZnO薄膜共同作用的结果。以甲基橙为模拟污染物,考察了纳米Ag-ZnO薄膜的光催化活性以及银沉积量对催化剂活性的影响。光催化降解结果表明,银的沉积量为0.018 2 mg·cm^-2的纳米Ag-ZnO薄膜的光催化活性最高,在紫外光照射3 h后甲基橙降解率约为78%,而纳米ZnO薄膜约为62%。     

Perfluorinated polymer surfaces comprising SF5-terminated long-chain perfluoroacrylate

A new perfluorinated acrylate monomer containing the SF₅(CF₂)₆-perfluorinated side chain was synthesized and polymerized into films. Bulk monomer characterization is consistent with the molecular structure based on FTIR, mass spectrometry and NMR analyses. The surface properties of polymer coatings were studied with aqueous wetting (contact angle) and X-ray photoelectron spectroscopy (XPS) methods. The surface composition is shown to be highly enriched in the terminal side chain SF₅-chemistry and exhibits properties consistent with a highly apolar, non-wetting perfluorinated polymer surface. Depth-dependent XPS studies using angular-resolved methods (ADXPS) confirmed a non-stoichiometric enrichment of sulfur and fluorine at the film ambient interface, consistent with a surface presence of the terminal SF₅-group and possibly film structural anisotropy in the surface zone. Time-of-flight (TOF) secondary ion mass spectrometry (SIMS) analysis supplements the XPS data by showing the presence of all expected SF₅-acrylate chemistry components in the outer 15 Å of the film surface.     

类荷叶结构聚全氟乙丙烯的超疏水性

以聚二甲基硅氧烷（PDMS）复制的荷叶表面微结构为阴模模板,将聚全氟乙丙烯（FEP）粉体置于该阴模模板上,在约0.3 N/cm2的压力,280 ℃和-0.1 Mpa真空度的条件下热压成型,成功制备了具有类荷叶结构的FEP表面。扫描电镜观察结果表明, FEP表面与荷叶表面微结构具有很大的相似性,该表面具有良好的超疏水性,与水的接触角达到168°,滚动角小于3°,而且具有良好的疏酸、疏碱、疏盐溶液性能和稳定性,即使在溶液中长期浸泡而失活后,经piranha洗液处理约10 min,其表面超疏水、疏酸、疏碱性能也可迅速恢复。PDMS的热重分析结果表明,PDMS阴模在热压条件下失重极小,可重复使用。因此,将FEP的耐酸、耐碱、耐腐蚀和低表面能的特性与荷叶表面的特殊结构有机结合,在制备抗粘附、自清洁容器等方面具有广泛的应用前景。     

Surface Performance and Cytocompatibility Evaluation of Acrylic Acid-Mediated Carboxymethyl Chitosan Coating on Poly(tetrafluoroethylene-co-hexafluoropropylene)

To improve the biocompatibility of poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) film, a technique based on Ar plasma pretreatment and UV-induced grafting polymerization was used to immobilize carboxymethyl chitosan (CMCS) on the FEP film surfaces. Initially Ar plasma was used to treat FEP film. Then, plasma treated FEP film was modified via UV-induced grafting polymerization with hydrophilic acrylic acid (AAc) monomer. The following immobilization of CMCS on the FEP-pAAc surface was carried out via an amidation reaction. The change of chemical composition and surface morphology of FEP film were characterized by attenuated total reflectance Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), scanning electronic microscopy (SEM) and atomic force microscopy (AFM). Results of water contact angles measurement showed that the hydrophilicity of the surface has improved significantly after surface modification. Furthermore, methyl thiazolyl tetrazolium (MTT) assay and cell morphology analysis confirmed that mouse fibroblasts (L929 cells) attachment and proliferation were improved remarkably on the modified FEP surface. These results suggest that CMCS were successfully employed to surface engineering FEP film, and enhanced its cell biocompatibility. The approach presented here may be exploited for surface modification of biomaterials.     

Chemical alteration of poly(tetrafluoroethylene) Teflon induced by exposure to vacuum ultraviolet radiation and comparison with exposure to hyperthermal atomic oxygen

The chemical alteration of poly(tetrafluoroethylene) Teflon by vacuum ultraviolet radiation (VUV) (115–400 nm) has been examined with X‐ray photoelectron spectroscopy (XPS). The initial F/C atom ratio of 1.98 decreases to 1.65 after a 2‐h exposure. The F/C atom ratio is further reduced to a steady‐state value of 1.60 after a 74‐h exposure. The high‐resolution XPS C1s data indicate that new chemical states of carbon form as F is removed and that the relative amounts of these states depend on the F content of the near‐surface region. The states are most likely due to C bonded only to one F atom, C bonded only to other C atoms, and C that has lost a pair of electrons through the emission of F^?. The exposure of the VUV‐damaged surface to research‐grade O₂ results in the chemisorption of a very small amount of O, and this indicates that large quantities of reactive sites are not formed during the chemical erosion by VUV. Further exposure to VUV removes this chemisorbed oxygen. A comparison of the XPS data indicates that the mechanisms of chemical alteration by VUV radiation and hyperthermal (～5 eV) atomic oxygen are different, as expected, because the excitation sources are quite different. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 552–561, 2005