Polyesters by lipase-catalyzed polycondensation of unsaturated and epoxidized long-chain α,ω-dicarboxylic acid methyl esters with diols

Long-chain, symmetrically unsaturated α,ω-dicarboxylic acid methyl esters (C₁₈, C₂₀, C₂₆) were obtained by the catalytic metathetical condensation of 9-decenoic, 10-undecenoic, and 13-tetradecenoic acid methyl esters, respectively, with the homogeneous Grubbs catalyst bis(tricyclohexyl phosphine) benzylidene ruthenium dichloride dissolved in methylene chloride. The dicarboxylic acid esters were epoxidized chemoenzymatically with H₂O₂/methyl acetate with Novozym 435^®, an immobilized lipase B from Candida antarctica. Polyesters from symmetrically unsaturated or epoxidized α,ω-dicarboxylic acid methyl esters with 1,3-propanediol or 1,4-butanediol, respectively, were achieved by enzymatic polycondensation with the same biocatalyst applied. With 1,3-propanediol as a substrate, the linear unsaturated and epoxidized polyesters had molecular weights of 1950–3300 g/mol and melting points of 47–75 °C, whereas with 1,4-butanediol as a substrate, the resulting polyesters showed higher molecular weights, 7900–11,600 g/mol, with similar melting points of 55–74 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1601–1609, 2001     

Analysis of thermal,oxidative and cold flow properties of methyl and ethyl esters prepared from soybean and mustard oils

Oilseed crop with high oil content and promising ecological adaptability are potential sources for competitive biodiesel production. This study investigates the scope of utilizing biodiesel development through the methyl and ethyl ester from soybean and mustard oil as an alternative fuel. Methyl and ethyl esters of oils having different fatty acids compositions such as soybean (SOME and SOEE) and mustard oil (MUME and MUEE) were prepared by transesterification with methanol and ethanol in the presence of an alkali-KOH catalyst. The gas chromatographic (GC) analysis of oil samples revealed that primary fatty acid composition in soybean oil was linoleic acid (C_18:2, 51.93%), followed by oleic acid (C_18:1, 22.82%), palmitic acid (C_16:0, 11.56%), linolenic acid (C_18:3, 5.95%) and stearic acid (C_18:0, 4.32%). Whereas, the main components in mustard oil were erucic acid (C_22:1, 32.81%), oleic acid (C_18:1, 24.98%), eicosenoic acid (C_20:1, 10.44%), linolenic acid (C_18:3, 8.61%) and palmitic acid (C_16:0, 2.80%). The physicochemical properties (acid value, iodine value, calorific value, flash point, pour point etc.) of methyl and ethyl ester samples were estimated and found to be within the acceptable range of ASTM D6751 standards specifications. The prepared esters and oil samples were examined for cold flow properties by differential scanning calorimetry (DSC). Results revealed better cold flow properties for MUME (−2.55 °C) and MUEE (−3.10 °C) than SOME (3.21 °C) and SOEE (1.83 °C) due to more unsaturated fatty acid content in MU. Thermal and oxidative stability of samples was determined by thermogravimetric analysis (TG) and differential thermal analysis (DTA). The thermal and oxidative stability ranking of the samples was in the order of oil > methyl esters > ethyl esters.

     

Novel cellulose derivatives. IV. Preparation and thermal analysis of waxy esters of cellulose

Cellulose esters with linear aliphatic acyl substituents ranging in size from C₁₂ (lauric acid) to C₂₀ (eicosanoic acid) were prepared in homogeneous solution (DMAc/LiCl) using a novel synthetic method based on the use of a mixed p-toluenesulfonic/carboxylic acid anhydride. The resulting waxy cellulose esters had a high degree of substitution (DS), between 2.8 and 2.9, and showed little degradation. Thermal analysis of these cellulose derivatives by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) revealed a series of transitions that represented motion by both ester substituents and cellulosic main chain. Broad crystallization and melting transitions attributed to side-chain crystallinity were observed in the range between −19 and +55°C; these side-chain T_m and T_c transition temperatures increased by 10°C per carbon atom of the ester substituent. The T_g of these derivatives increased linearly with increasing substituent size from 94°C for C₁₂ (cellulose laurate) to 134°C for C₂₀ (cellulose eicosanoate). Evidence of “main-chain” crystallization was not observed for these samples, except in the case of peracetylated C₁₂ and C₁₄ esters, which had T_m values of 96°C and 107°C, respectively. © 1996 John Wiley & Sons, Inc.     

Response Factor Correction for Estimation of Ester Content in Biodiesel

EN 14103 is generally used for quantification of ester content in biodiesel free of heptadecanoate ester (C17:0) or methyl nonadecanoate (C19:0), which are employed as internal standards. It was observed that ester content obtained by EN 14103 method did not match with theoretical value of biodiesel, as the method did not take care of response factors of each component to compensate for changes in detector sensitivities. In this study, the whole range of fatty acid (C₆–C_24:1) methyl esters have been taken into consideration for the calculation of the ester content. Methyl nonadecanoate (C19:0) was used as an internal standard. The response factors of both the saturated and unsaturated methyl esters in the range C₆–C_24:1 were estimated and found in the range 0.97–1.16. The ester content was calculated after applying the response factors of each methyl ester. The results obtained by this method agreed well with the theoretical value as compared to estimated value using EN14103 method. The results obtained from this method also show good correlation (R ² = 0.98) with ¹H-NMR method. Further, this method does not depend on nature of biodiesel feed stock and is applicable to all methyl biodiesel samples obtained from different raw materials.     

Simultaneous thermoanalytical investigations of (C6H5)4AsCl and (C6H5)4PCl under air and argon atmospheres

The thermoanalytical curves of (C₆H₅)₄AsCl (I) and (C₆H₅)₄PCl (II) were generated simultaneously by using a Netzsch simultaneous thermal analyser 409 under static air and dynamic argon atmospheres. The ranges of thermal stability of I and II were found to be 145–310°C and 137–365°C, respectively, and their melting points to be 261 and 278°C. The DTA profiles of I and II differ and can be used for their distinction.     

Thermal analysis of lipids isolated from various tissues of sheep fats

The physical–chemical properties and fatty acid composition of sheep subcutaneous, tallow, intestinal, and tail fats were determined. Sheep fat types contained C_16:0, C_18:0, and C_18:1 as the major components of fatty acid composition (19.56–23.40, 20.77–29.50, 32.07–38.30%, respectively). Differential scanning calorimetry (DSC) study revealed that two characteristic peaks were detected in both crystallization and melting curves. Major peaks (T _peak) of tallow and intestinal fats were similar and determined as 31.25–24.69 and 7.44–3.90 °C, respectively, for crystallization peaks and 15.36–13.44 and 45.98–44.60 °C, respectively, for melting peaks in DSC curves; but those of tail fat (18.29 and −2.13 °C for crystallization peaks and 6.56 and 33.46 °C for melting peaks) differed remarkably from those of other fat types.     

Simultaneous thermal analysis of zirconium(IV) acetylacetonate in a helium atmosphere

TG, DTG, DTA, DDTA and ΔH analyses of zirconium(IV) acetylacetonate, Zr(C₆H₇O₂)₄ (= I), were performed in a helium atmosphere with a Netzsch Thermal Analyser STA 429. The enthalpies of the main steps of transformation were computed to be +42.182 J·g^?1 and ?21.113 J·g^?1. Pure I is thermally stable up to about 199°C in He gas, and melting too occurs at about 199°C. Four well-defined decomposition steps were observed over the range between ambient and 600 °C, accompanied by a weight loss of 61.59%. The final product contained pure ZrO. The unique shapes of the TG and DTA curves could be used for the identification of I.     

The synthesis and liquid crystal transition temperatures of some weakly polar nematic methyl (E)-[trans-4-substituted-cyclohexyl]-allyl ethers

Abstract

We have introduced an oxygen atom and a carbon-carbon double bond with a trans-configuration (E) into the terminal alkyl chain of a wide variety of liquid crystalline cyclohexane derivatives to produce a variety of new methyl (E)-allyl ethers. The melting points and tendency to form smectic mesophases are often low, while nearly all of the compounds prepared exhibit a nematic phase. Thus, even two-ring derivatives can exhibit nematic phases over a wide temperature range (≤80°C), sometimes starting below room temperature (T _m≈10°C). Comparisons with the corresponding derivatives incorporating either just an oxygen atom or just a carbon-carbon double bond in the same position indicate that synergetic effects lead to broader nematic phases than would otherwise have been expected. Thus many of the new methyl (E)-allyl ethers exhibit nematic phases over a wider temperature range than the corresponding materials with an unsubstituted alkyl chain attached to the cyclohexyl ring. The new compounds are easily prepared from known starting materials. Many intermediates are themselves liquid crystalline. This allows investigation of the relationship between liquid crystal transition temperatures and the nature of the terminally substituted alkyl chain (for example, incorporating C[dbnd]C, OH, CO₂C₂H₅ and OCH₃ groups).     

Double bond migration to methylidene positions during electron ionization mass spectrometry of branched monounsaturated fatty acid derivatives

Electron ionization mass spectra of several monounsaturated methyl-branched fatty acid methyl and trimethylsilyl esters were examined. These spectra exhibited some intensive fragment ions, whose formation could be explained after double-bond migration to methylidene position. This preferential migration (substantiated by deuterium labeling) acts significantly in the case of monounsaturated fatty acid methyl and trimethylsilyl esters possessing a methyl branch localized between the penultimate and the C₄ positions (relative to the ester group), whatever the position of the double-bond. Allylic cleavage and γ-hydrogen rearrangement of the ionized methylidene group thus formed afforded very interesting fragment ions, which could be particularly useful to determine branching positions of monounsaturated methyl-branched fatty acid methyl and trimethylsilyl esters without additional treatment.     

Crystallization of mould powders used in the continuous casting of steel

Mould powders used in the continuous casting of steel play an important role in the heat transfer and lubrication between the liquid metal strand and mould. A range of industrial fluxes was investigated, each sample being decarburized and milled prior to DTA. On heating, the powders undergo silicate crystallization producing exotherms in the range 600°–1000°C, before melting. The activation energy of crystallization (E _a) was determined from the peak shifts of each flux heated at different rates, and ranged from 100–450 kJ/mol.E _a values increased with flux viscosity and decreased with basicity, suggesting that DTA can be applied to mould powder evaluation for use in continous steel casting.     

An improved derivatization method for sensitive determination of fatty acids by high-performance liquid chromatography using 9-(2-hydroxylethyl)-carbazole as derivatization reagent with fluorescence detection

Summary Tagging techniques with reagents used for fluorescent detection for short and long-chain fatty acids using high-performance liquid chromatography are evaluated in terms of the tagging reactions, handing, flexibility, stability of the reagents. Emphasis is given to the applications of the tagging techniques to relatively high molecular mass fatty acids. The fatty acids or carboxylic compounds were derivatized to their corresponding esters with 9-(2-hydroxy ethyl)-carbazole (HEC) in acetonitrile at 60°C with N, N′-carbonyldiimidazole (CDI) as a coupling agent in the presence of 4-dimethylaminopyridine (DMAP). A mixture of esters of C₁−C₂₀ fatty acids was completely separated with 45 min using gradient elution on a reversed-phase C₁₈ column. The maximum fluorescence emission for the derivatized fatty acids is at 365 nm (λ_ex 293 nm). Studies on derivatization conditions indicated that fatty acids react rapidly and smoothly with HEC in the presence of CDI and DMAP in acetonitrile to give the corresponding sensitively fluorescent derivatives. The application of this method to the analysis of long chain fatty acids in plasma is also investigated. The LC separation shows good selectivity and reproducibility for fatty acids derivatives. The relative standard deviations (n=6) for each fatty acid derivative are <5.0%. The detection limits are at 38–57 fmol levels for C₁₄−C₂₀ fatty acids and lower levels for <C₁₄ fatty acids.     

Self-Assembled Structures of Diglycerol Monolaurate- and Monomyristate in Olive Oil

We have investigated the phase behavior and self-assembled structures of diglycerol monolaurate-and monomyristate (abbreviated as C₁₂G₂ and C₁₄G₂, respectivley) in olive oil over a wide range of temperatures and compositions. At lower temperatures, both the surfactants appear in solid state (α-solid), which does not swell with olive oil. The α-solid transforms into lamellar liquid crystal (L_α) phase upon heating and the solid melting temperature is practically constant at all surfactant/oil compositions, but the C₁₂G₂ melts earlier than the C₁₄G₂. There appear the dispersions of L_α phase and α-solid in the dilute regions of the C₁₂G₂/olive oil and the C₁₄G₂/olive oil systems, respectively, at 25°C. The L_α phase can solubilize some amount of olive oil, but as the oil concentration increases the excess oil separates out from the L_α phase, and there appears L_α dispersion in the dilute surfactant concentration region. The L_α phase eventually transforms into isotropic solutions (reverse micelles) with further heating. The structures (shape and size) of the reverse micelles have been characterized by small-angle x-ray scattering technique. It has found that the C₁₂G₂ and C₁₄G₂ surfactants form reverse rod-like micelles in olive oil above the L_α melting temperature and the micellar size increases with surfactant concentration, but decreases with temperatures.     

Melting behavior of isotactic polystyrene

The melting behavior of isotactic polystyrene, crystallized from the melt and from dilute solutions in trans-decalin, has been studied by differential scanning calorimetry and solubility measurements. The melting curves show 1, 2, or 3 melting endotherms. At large supercooling, crystallization from the melt produces a small melting endotherm just above the crystallization temperature T_c. This peak originates from secondary crystallization of melt trapped within the spherulites. The next melting endotherm is related to the normal primary crystallization process. Its peak temperature increases linearly with T_c, yielding an extrapolated value for the equilibrium melting temperature T_c° of 242 ± 1°C as found before. By self-seeding, crystallization from the melt could be performed at much higher temperature to obtain melting temperatures as high as 243°C, giving rise to doubt about the value of T_c° found by extrapolation. For normal values of T_c and heating rate, an extra endotherm appears on the melting curve. Its peak temperature is the same for both melt-crystallized and solution-crystallized samples, and independent of T_c, but rises with decreasing heating rate. From the effects of heating rate and partial scanning on the ratio of peak areas and of previous heat treatment on dissolution temperature, it is concluded that this peak arises from the second one by continuous melting and recrystallization during the scan.     

Nucleation and crystallization of WO3 from pure and Pb2+ doped NaF fluxes

DTA runs and flux growth experiments have shown that the crystallization temperatures of WO₃ from NaF flux are in the range of 1020–1090°C. Addition of Pb²⁺ influences the crystal growth and the crystallization temperatures are altered (within this range). A thermal effect giving rise to an exothermal DTA peak was observed above the crystallization temperature. This peak occurs at a higher temperature when lead ions are present. We propose an explanation based on pre-crystallization clustering and on the number of nucleation sites on the surface of the platinum crucible.     

Isothermal crystallization of P3HT:PCBM blends studied by RHC

Defining appropriate annealing temperatures and times is vitally important for increasing the efficiency of bulk heterojunction solar cells by favoring the crystallinity of the polymer-fullerene blend components. In order to better understand the annealing process, the isothermal crystallization of poly(3-hexyl thiophene) (P3HT) and [6,6]-phenyl C₆₁-butyric acid methyl ester (PCBM) blend investigated by means of rapid heating cooling calorimetry (RHC). Isothermal crystallization experiments at temperatures in between the glass transition and melting, within the temperature range of 70–150 °C, can successfully be performed since RHC permits cooling at a sufficiently high rate in order to prevent crystallization during cooling. Crystallization isotherms were determined from the subsequent melting behavior of the blend. They were measured for a wide set of annealing temperatures and times, and the evolution of the crystallization rate with temperature is compared for annealing from the glassy state and from the melt state.     

Total synthesis of unsaturated trihydroxy C18 fatty acids

The total synthesis, in chiral form, of unsaturated trihydroxy C₁₈ fatty acids 13 and 14 as methyl esters, starting from natural tartaric acid via the key intermediate aldehyde 5 is reported.     

A study of sulphonated and oxidized coals by thermal analysis

Earthy and xylytic brown coals from Poland have been sulphonated with 98% sulfuric acid at temperatures of 60°, 90° and 140°C. The main exothemic peak shifts to higher temperatures with increase in sulphonation reaction temperature whereas overall weight loss to 1000°C decreases. DTA curves of earthy and xylytic coals sulphonated at higher temperatures are similar, even though DTA curves of the unmodified coals differ appreciably. Thermal decomposition of earthy coal oxidized by nitric acid follows a different pattern. Nitric acid causes oxidation and depolymerization of the organic components and this is reflected in the shapes of DTA and TG curves of oxidized coals. As the nitric acid concentration and reaction temperature increase, the main exothermic peak shifts to lower temperatures (from 330°C for basic coal to 270°C for coal oxidized with 30 and 50% nitric acid). The weight loss is higher for oxidized coal than for coal unmodified by nitric acid.     

Time and temperature-based study for the production of high T C phase by sol-gel technique in Pb-bscco system

The high T_C superconducting phase Bi₂Sr₂Ca₂Cu₃Ox (2223) in the Pb-BSCCO system has been produced by EDTA-gel processing using nitrate solutions. The precursor has heated in two stages, at 300 and 800°C each for 2 h, to avoid the burning of the important species involved in the final product. The effects of time (6 to 48 h) and temperature (845 and 855°C) on the formation of the 2223 phase have been studied by sintering the samples in air. Thermal analysis (TG/DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and a vibrating sample magnetometer (VSM) have been employed to investigate the powder produced at different stages of decomposition, oxidation and formation of sintered materials from the powders. The volume-fraction of the 2223 phase at 845°C increases with time, the maximum value of the 2223 phase was obtained at 120 h. It has been observed that the formation of the high T_C phase is remarkably enhanced at the temperature of the endothermic peak of the DTA curve. The best result has been obtained in the sample sintered for 24 h at the temperature 855°C (endothermic peak). This also indicated that at 855°C, the large volume-fraction of 2223 phase with T_C 113 K grew in short time and as the sintering time increased, it decomposed into the Bi₂Sr₂CaCu₂Ox (2212) phase and other phases.     

Accurate determination of the degree of substitution of long chain cellulose esters

The determination of the degree of substitution (DS) of fatty acid cellulose esters with alkyl chain lengths from C8 to C18 was performed by direct transesterification with trimethylsulphonium hydroxide (TMSH) using tert-butyl methyl ether (MTBE) as a solvent. Transesterification was demonstrated to be quantitative at 75 °C in 60 min. The quantification of the formed fatty acid methyl esters was performed by gas chromatography (GC). After the optimization of the method, long chain cellulose esters (LCCE) could be analyzed in a wide range of DS. The obtained values were compared to those given by other existing protocols. LCCE with DS-values in a range of 5 × 10⁻⁵ to 3 were analyzed with high accuracy. Reproducibility is weakened for high DS values if the sample has a compact aspect limiting the accessibility of TMSH to the ester functions. This method can also be suitable for the analysis of mixed cellulose esters.     

The synthesis and liquid crystalline behaviour of alkoxy‐substituted derivatives of 1,4‐bis(phenylethynyl)benzene

Despite the prevalence of organised 1,4‐bis(phenylethynyl)benzene derivatives in molecular electronics, the interest in the photophysics of these systems and the common occurrence of phenylethynyl moeties in molecules that exhibit liquid crystalline phases, the phase behaviour of simple alkoxy‐substituted 1,4‐bis(phenylethynyl)benzene derivatives has not yet been described. Two series of 1,4‐bis(phenylethynyl)benzene derivatives, i.e. 1‐[(4′‐alkoxy)phenylethynyl]‐4‐(phenylethynyl)benzenes (5a–5f) and methyl 4‐[(4″‐alkoxy)phenylethynyl‐4′‐(phenylethynyl)] benzoates (18a–18f) [alkoxy = n‐C₄H₉ (a), n‐C₆H₁₃ (b), n‐C₉H₁₉ (c), n‐C₁₂H₂₅ (d), n‐C₁₄H₂₉ (e), n‐C₁₆H₃₃ (f)] have been prepared and characterised. Both series have good chemical stability at temperatures up to 210°C, the derivatives featuring the methyl ester head‐group (18a–18f) offering rather higher melting points and generally stabilising a more diverse range of mesophases at higher temperatures than those found for the simpler compounds (5a–5f). Smectic phases are stabilised by the longer alkoxy substituents, whereas for short and intermediate chain lengths of the simpler system (5a–5c) nematic phases dominate. Diffraction analysis was used to identify the SmB_hex phase in (5d–5f) that is stable within a temperature range of approximately 120–140°C. The relationships between the organisation of molecules within these moderate temperature liquid crystalline phases and other self‐organised states (e.g. Langmuir‐Blodgett films) remain to be explored.