Kinetic spectrophotometric determination of iron oxidation states in geological materials

Summary A kinetic spectrophotometric approach is applied to the determination of iron oxidation states in geological materials. Silicate rock samples were sealed in a Teflon vial under argon atmosphere and were decomposed with a mixture of hydrofluoric acid and sulphuric acid by the microwave digestion technique. The absorbance of iron(III)-Tiron complex was followed at 560 nm and the absorbance/time relation was analyzed by non-linear least squares fitting. The FeO and Fe₂O₃ determinations in silicate rocks by the proposed kinetic method agree with those done by the static o-phenanthroline method. The analytical results for standard igneous rock samples are compared with published data.     

Chemical determination of some major constituents in rocks and minerals

Macro-analytical schemes are described for the determination of aluminium, total iron and iron(II), as part of the complete analysis of silicate rocks and minerals Solvent extraction eliminates interferences before titration of aluminium with DCTA Iron(III) is extracted with MIBK and determined indirectly with EDTA Iron(II) is determined by potentiometric titration under an inert atmosphere. Interferences are removed with 2,4-pentanedione and carbon tetrachloride before the determination of calcium and magnesium.     

A facile and sensitive spectrophotometric determination of ascorbic acid

A simple and sensitive procedure for the spectrophotometric determination of ascorbic acid is described. It involves formation of ferroin when ascorbic acid reacts with a mixture of iron(III) and 1,10-phenanthroline, and measurement of the absorbance at 510 nm. The procedure has been applied to assay of pharmaceutical preparations of vitamin C. The average error did not exceed 0.3%.     

3,4-Dihydroxybenzoic Acid As A Reagent for the Spectrophotometric Determination of Titanium

Abstract

The reaction between titanium(IV) and 3,4-dihydroxybenzoic acid in aqueous media results in an intensely colored complex which is stable for at least 8h. It allows the spectrophotometric determination of titanium in silicate rocks. The proposed method, in pH 4.0–6.0, shows a molar absorptivity of 1.43.10⁴ L.mole^?1.cm^?1 at 380 nm. Beer's Law is obeyed up to 3.0 μg/mL of titanium(IV). The interference of iron(III) can be eliminated by reduction to iron(II) with hydroxylamine hydrochloride. The method was applied to the determination of titanium in various standard rocks and the results indicated that the accuracy and precision are satisfatory.     

Indirect spectrophotometric determination of silicate

An indirect spectrophotometric method has been developed for trace determination of silicate in aqueous samples. The silicate is converted into silicomolybdic acid and extracted into a mixture of 1-butanol and butyl acetate. The silicomolybdic acid is then decomposed with sodium hydroxide and the molybdenum(VI) reduced to molybdenum(III) with a Jones reductor, followed by reoxidation to molybdenum(VI) with iron(III). The resulting iron(II) is complexed with ferrozine, and the absorbance of the complex measured at 562 run. In this manner, submicroamounts of silicate can be determined.     

紫尿酸双波长叠加光度法测定水中微量铁

在碱性介质中,铁（Ⅱ）与紫尿酸发生显色反应形成一种蓝色配阴离子,该配阴离子具有两个吸收峰,分别位于630nm和350nm,吸光度A630,A350之和△A与铁（Ⅱ）的含量在0-2μg／mL范围内线性关系良好,据此建立了测定微量铁的紫尿酸双波长叠加光度法,该法用于水中微量铁的测定,测定结果与火焰原子吸收法（FAAS）相吻合,加标回收率为98％-102％,测定结果的相对标准偏差为1．2％-2．9％（n=5）。     

High Sensitive and Selective Spectrophotometric Determination of Aluminium after Collection on a Membrane Filter Using 2,3‐Dichloro‐6‐(3‐carboxy‐2‐hydroxy‐1‐naphthylazo)quinoxaline and Zephiramine

Abstract

A high sensitive and selective spectrophotometric method for the determination of aluminium(III) using 2,3‐dichloro‐6‐(3‐carboxy‐2‐hydroxy‐1‐naphthylazo)quinoxaline (DCHNAQ) and zephiramine (zeph) is described. The formed ion pair precipitate between zephiramine and perchlorate ions is effective for the enrichment of aluminium(III) on a membrane filter as its ternary complex with DCHNAQ and zephiramine. The solid–state absorbance of the complex on the membrane filter is measured at 655 nm against a blank thin layer and the difference is calculated. The colour system obeys Beer's law from 5.0–150 ng ml^?1 of aluminium. The detection and quantification limits were calculated. The relative standard deviation for 60 ng of aluminium(III) in 20‐ml sample volume amounts 0.84% (n=10). A ligand buffer solution, composed of transcyclohexane‐1,2‐diaminetetraacetic acid with an excess of zinc(II), is effective for masking interferences from foreign ions, particularly iron(III). The proposed method was applied successfully to tap and environmental water, biological (human blood, urine, and gallstone), and soil samples.     

The analysis of inorganic siliceous materials by atomic absorption spectrophotometry and the hydrofluoric acid decomposition technique : Part I. the analysis of silicate rocks

The analysis of various inorganic siliceous materials of geological and industrial interest is discussed. The methods proposed are based on decomposition of a single sample by hydrofluoric acid and determination by atomic absorption spectrophotometry of up to 10 constituents. General procedures are described, and details are given for the determination of silicon, aluminium, total iron, magnesium, calcium, sodium, potassium, titanium and manganese in silicate rocks. Analytical data are given for the analysis of reference rocks G-2 and W-1.     

Spectrophotometric extractive determination of Ti in mineral samples and aluminium alloys as a mixed-ligand Ti(IV)-salicylhydroxamic acid-thiocyanate complex

A sensitive method for the determination of titanium, based on the formation of a mixed-ligand Ti (IV)-salicylhydroxamic acid-thiocyanate complex and extraction of this into a liquid ion-exchanger phase has been developed. The extract has maximum absorbance at 400–460 nm and the apparent molar absorptivity is 1.8 × 10⁴l · mole^–1 · cm^–1 at 420 nm. The system obeys Beer's law at 420 nm in the range 0.16–3.20 mg/1 Ti, the detection limit being 0.1 mg/1. The method is found suitable for determination of titanium in aluminium alloys and silicate rocks.     

Quantitative Determination of Iron and Aluminium in Some Alloys and Silicate Rocks After a Cation Exchange Separation on Zirconium(IV) Phospho and Silico Arsenates

Abstract

A rapid and quantitative method has been developed for the analysis of some iron and aluminium based alloys and silicate rocks using zirconium(IV) based arsenophosphate and arsenosilicate cation exchangers. The method is simple, reproducible and precise with a standard deviation <3%, for the direct determination of iron and aluminium in rocks and alloys. The low standard deviation values suggest that the method should be useful for the standardization purposes.     

Spectrophotometric determination of silicon in silicates by flow-injection analysis

A flow-injection spectrophotometric method has been developed for the accurate, continuous determination of silicon in silicate rocks. A rock sample solution is prepared by fusion with a 1:1 mixture of lithium carbonate and boric acid and subsequent dissolution of the cake in 1 M hydrochloric acid. The preparation technique is the same as that used for the determination of total iron, aluminium, calcium, titanium, and phosphorus in silicate rocks by flow-injection spectrophotometry. Because of the marked polymerization of silicic acid in acid solution, silicic acid is depolymerized in alkaline medium after a simple cation-exchange column filtration of the rock sample solution and then determined by a static or an FIA spectrophotometric method. The FIA system consists of two channels which carry the carrier solution and molybdate reagent, and allows the colour reaction to proceed under controlled conditions. The FIA system permits high throughput of 70 samples per hour. The procedure has been applied to a variety of standard silicate rocks of the U.S. Geological Survey and the Geological Survey of Japan, and gave satisfactory agreement with the recommended values.     

Chemical reduction and spectrophotometric determination of silver, copper and nickel

Silver(I), copper(II) and nickel(II) can be reduced to the metallic state by formaldehyde at pH 11, chromium(II) in 2.5M sulphuric acid, and borohydride at pH 5.5-6.0, respectively. Reoxidation of these metals with iron(III) in the presence of Ferrozine enables their determination at concentration below 1 mug/ml by measurement of the absorbance of the iron(II)-Ferrozine complex at 562 nm, with a precision better than 3%. The apparent molar absorptivities for silver, copper and nickel are 2.78 x 10(4), 5.56 x 10(4) and 5.58 x 10(4) l.mole(-1).cm(-1), respectively. The average thickness of silver films on glass surfaces can be determined in the way.     

Simultaneous determination of iron(II) and iron(III) in aqueous solution by kinetic spectrophotometry with tiron

A kinetic spectrophotometric method that requires no prior measurement of rate constants is developed for the simultaneous determination of iron(II) and iron(III). The method is based on the aerial oxidation of iron(II) in the presence of tiron and acetate ions. The iron(III) formed is subsequently complexed with tiron and the absorbance/time relation is evaluated. The concentrations of iron(III) and iron(II) are obtained from the absorbance values at the start and at equilibrium, respectively, calculated by non-linear least-squares fitting. A linear calibration graph is obtained up to 12 μg ml^?1 iron(II)/iron(III). The method is applied to iron-rich ground water.     

Spectrophotometric determination of cobalt in iron-, cobalt- and nickel-base alloys

A spectrophotometric method has been developed for the accurate determination of cobalt at milligram level, based on oxidation of the cobalt(II)-EDTA complex with gold(III) chloride at pH 4.0-6.5 and 100 degrees and measurement of the absorbance of the resultant violet cobalt(III)-EDTA complex at 535 nm. The precision is not affected by the presence of several metal ions; including coloured ones such as Cu(II), Ni(II) and Fe(III). However, chromium(III) interferes since it also forms a violet complex with EDTA, but can be removed by separation with pyridine. Practical application of the method is illustrated by the determination of cobalt in alloys based on iron, cobalt and nickel. Over the cobalt range 8-52% the error ranges from 0.1 to 0.3%.     

Catalytic determination of trace amounts of vanadium by means of the chromotropic acid-bromate reaction

A catalytic reaction-rate method is described for the determination of trace amounts of vanadium; the method is based on the vanadium-catalysed oxidation of chromotropic acid by bromate. The reaction was followed spectrophotometrically by measuring the rate of change in absorbance of chromotropic acid at 430 nm. The method is sensitive, rapid and simple, and allows determination of as little as 5 ng of vanadium. Of the many ions examined, iron(III), copper and tungsten(VI) interfered seriously at 100-fold concentrations. The relative standard deviation for 20 ng of vanadium (10 determinations) was 2.5%.     

Individual and simultaneous determination of uric acid and ascorbic acid by flow injection analysis

Flow injection methods for the individual and simultaneous determination of ascorbic acid and uric acid are proposed. A spectrophotometer and a miniamperometric detector are connected in sequence. The calibration graphs for uric acid obtained by measuring its absorbance at 293 nm and its current at +0.6 V are linear up to at least 80 and 70 mug/ml, respectively, with an rsd (n = 10) of 1 % for both methods at mid-range concentrations. The calibration graph for ascorbic acid with amperometric detection is linear up to 80 mg/l. with an rsd (n = 10) of 0.8% at 30 mg/l. The simultaneous determination of uric acid and ascorbic acid is based on measurement of the absorbance of uric acid at 393 nm and amperometric determination of both analytes at +0.6 V. The average relative errors of the analysis of binary mixtures of uric acid and ascorbic acid are 2.2 and 4.2%, respectively.     

Spectrophotometric and derivative spectrophotometric determination of aluminium with Hydroxynaphthol Blue

The reaction of aluminium(III) with Hydroxynaphtol Blue (HNB) in aqueous media at apparent pH 5.5 results in a red complex that is stable for at least 4 hr. Beer's Law is obeyed up to 1.6 microg/ml of aluminium(III) with an apparent molar absorptivity of 1.66 x 10(4) l.mol(-1). cm(-1) at 569 nm. This paper proposes procedures for aluminium(III) determination by ordinary and first-derivative spectrophotometry. The results demonstrated that the linear dynamic range is 0.03-1.60 microg/ml for ordinary spectrophotometry and 11.8-320.0 ng/ml for first derivative spectrophotometry. The HNB is not selectivity for aluminium, but the addition of EDTA allows the aluminium determination in the presence of accepted amounts of Ca(II), Mg(II), Mn(II), Ba(II), Sr(II), Cd(II), Pb(II), La(III), In(III), Bi(III) and Zn(II). The interference of Cu(II) and Hg(II) can be masked by thiosulphate. Ions such as UO(2)(II), Mo(VI), Co(II), Ti(IV) and PO(4)(III) do interfere seriously. This method was applied for aluminium determination in copper-base alloy, zinc-base alloy, magnesium-base alloy, iron ore, manganese ore, cement, dolomite, feldspar and limestone. The results indicated high accuracy and precision.     

Sequential determination of iron and titanium by flow-injection analysis

A flow-injection method has been developed for the sequential spectrophotometric determination of iron and titanium using 3,4 dihydroxybenzoic acid as chromogenic reagent. The system involves the sequential measurement of the absorbances of the complexes at 380 and 570 nm. The system is designed using a simultaneous injection of sample and reagent into separate carrier streams. The proposed method is characterized by a precision of about 2%, a sampling rate of about 50 samples per hour, and a reagent consumption of 200 mul (0.50% solution) per sample. It is relatively free of interferences and was used for the sequential determination of titanium and iron in rocks.     

Separation and accurate determination of iron and aluminium in a single sample of silicate rock

A procedure for the separation and subsequent determination of iron and aluminium in silicate samples is given. The anion-exchange separation of iron(III) from vanadium was studied under the conditions of rock analysis. The salt content of the sample solution and the applicability of resins were studied to determine the optimum conditions for the separation of iron and aluminium. The proposed procedure was tested by determining iron and aluminium in the Geological Standards S1 and W1.     

Ultraviolet spectrophotometric determination of tungsten(VI) with ammonium 1-pyrrolidinecarbodithioate

A simple and rapid ultraviolet spectrophotometric method is proposed for the determination of trace amounts of tungsten(VI) with ammonium 1-pyrrolidinecarbodithioate (APDC). The method is based on measurement of the absorbance of the tungsten APDC complex in fairly concentrated hydrochloric acid medium; no extraction is required. The complex is formed at an initial acidity of 6M hydrochloric acid and has an absorption maximum at 250 nm. The high absorption of the reagent blank at 250 nm disappears on decomposition of excess of reagent by heating. Beer's law is obeyed over the range 0.43–3.2 ppm of tungsten(VI). The molar absorptivity of the complex is 4.5 × 10⁴ l.mole⁻¹ .cm⁻¹ at 250 nm. Tenfold amounts of aluminium, magnesium, calcium, cobalt, iron(II), lead, silver, sodium and titanium do not interfere in the determination of 50 μg of tungsten (VI).