Extractive separation of molybdenum as Mo(V) xanthate from Iron, vanadium, Tungsten, copper, uranium and other elements

A simple and selective extraction of molybdenum is described. Tungsten is masked with tartaric acid and molybdenum(VI) is reduced in 2M hydrochloric acid by boiling with hydrazine sulphate. Iron, copper and vanadium are then masked with ascorbic acid, thiourea and potassium hydrogen fluoride respectively. The molybdenum(V) is extracted as its xanthate complex into chloroform, from 1M hydrochloric acid that is 0.4M potassium ethyl xanthate. The complex is decomposed by excess of liquid bromine, and the molybdenum is stripped into alkaline hydrogen peroxide solution. The molybdenum is then determined by standard methods. Large amounts of Cu(II), Mn(II), Fe(III), Ti(IV), Zr, Ce(IV), V(V), Nb, Cr(VI), W(VI), U(VI), Re(VII) and Os(VIII) do not interfere. Several synthetic samples and ferromolybdenum have been rapidly and satisfactorily analysed by the method.     

Extraction of molybdenum(V) as its ferron complex with trioctylamine in chloroform from a sulphuric acid medium

A simple, rapid, and highly selective method for the separation of molybdenum from a large number of elements of analytical importance has been developed. The method is based on the extraction of a Mo(V)-ferron (7-iodo-8-hydroxyquinoline-5-sulphonic acid) complex into trioctylamine-chloroform in a sulphuric acid medium using ascorbic acid as a reductant. Many elements such as Re(VII), W(VI), U(VI), Th(IV), Cr(III), Cr(VI), V(V), Ce(IV), Ru(III), Co(II), Ni(II), Mn(II), Fe(II), Fe(III), Cd(II), Mg(II), Cu(II), Al(III), Zn(II), Pb(II), Ag(I), and As(V) are not extracted under the conditions proposed and, thus, molybdenum can be easily separated without any interference. Sulphate, chloride, nitrate, phosphate, and oxalate anions have no effect on the extraction of molybdenum. However, zirconium and palladium interfere seriously. The ratio of Mo: ferron: TOA in the extracted species is found to be 1: 1: 3 using Job’s method of continuous variations. This value has been further confirmed by the mole-ratio method. The text was submitted by the authors in English.     

Extractive-spectrophotometric determination of molybdenum as mixed-ligand complexes with thiocyanate and amidopyridines

A fairly selective and sensitive method is described for the determination of microgram amounts of molybdenum(V) by means of its reaction with thiocyanate and the enolic form of various amidopyridines and extraction into benzene. The molar absorptivity of the complexes is in the range 1.5-1.9 x 10(4) l.mole(-1).cm(-1) at lambda(max) 470 nm. The method is applicable in 1.5-7M hydrochloric acid or 1.2-6(M) sulphuric acid media. Cu(+), Co(2+), Mn(2+), Zn(2+), Ni(2+), Cd(2+), Fe(3+), Al(3+), Cr(3+), Ti(4+), Zr(4+), V(V), Nb(5+), Ta(5+), W(VI) and U(VI) do not interfere.     

The spectrophotometric determination of vanadium after extraction as vanadium(III) ferronate by tribenzylamine

Vanadium(III) obtained by dithionite reduction of vanadium(V) can be extracted as its ferron complex with tribenzylamine in chloroform from 0.05 M sulphuric acid. Vanadium (0–5 μg ml^-1) is determined spectrophotometrically at 430 nm with a sensitivity of 0.0028 μg V cm^-2. Al(III), Co(II), Ni(II), Fe(II, III), Hg(II), Si(IV), Be(II), Mg(II), Ca(II), Sr(II), Ba(II), Cr(VI, III), W(VI), Zn(II), U(VI), Mn(II). Pb(II), Cu(II), Cd(II) and Th(IV) do not interfere; only Mo(VI), Ti(IV), Zr(IV). Bi(V) and Sn(II) interfere. A single determination takes only 7 min. The extracted complex is V^III (R-3H.TBA)₃ where R = C₉H₄O₄NSI. The method is satisfactory for the determination of vanadium in steels, alum and other samples without preliminary separations.     

Extraction and separation of bismuth(III) from steel and bismuth-base alloys

Summary Separation of bismuth(III) from iron(III), molybdenum(VI), vanadium(V), chromium(VI), titanium(IV), antimony(III), lead(II), beryllium(II), uranium(VI), hafnium(IV), indium(III) and zirconium (IV) is achieved by solvent extraction with high molecular weight amines from sodium succinate solution adjusted to suitable pH. Bismuth(III) is stripped from the organic phase and determined spectrophotometrically. The method is shown to be applicable to bismuth alloys.

---

Extraktion und Trennung von Wismut(III) aus Stahl und wismuthältigen Legierungen

Zusammenfassung Wismut(III) läßt sich von Fe(III), Mo(VI), V(V), Cr(VI), Ti(IV), Sb(III), Pb(II), Be(II), U(VI), Hf(IV), In(III) und Zr(IV) durch Extraktion mit hochmolekularen Aminen aus Natriumsuccinat bei geeignetem pH trennen. Bi(III) wird dann von der organischen Phase getrennt und spektralphotometrisch bestimmt. Das Verfahren eignet sich für Wismutlegierungen.

     

Spectrophotometric determination of molybdenum by extraction of its thiosulphate complex

A simple and rapid spectrophotometric determination of molybdenum is described. The molybdenum thiosulphate complex is extracted into isoamyl alcohol from 1·0–1·5M hydrochloric acid containing 36–40 mg of Na₂S₂O₃·5H₂O per ml. The absorbance at λ_max = 475 nm obeys Beer's law over the range 0–32 μg of Mo per ml of solvent phase. Up to 5 mg/ml of Ti(IV), V(V), Cr(VI), Fe(III), Co(II), Ni(II), U(VI), W(VI), Sb(III), 1 mg/ml of Cu(II), Sn(II), Bi(V) and 10 μg/ml of Pt(IV) and Pd(II) do not interfere. Large amounts of complexing agents interfere. The method has been applied to analysis of synthetic and industrial samples.     

Anionic Fischer-type carbene complexes as bidentate (N,O) ligands

New polynuclear complexes, (L1)3M2 [M2 = Cr(III) (4a,4b), Fe(III) (5), Co(III) (8)], (L1)2M2(L2)2 [M2 = Co(II) (7), Ni(II) (9)], (L1)2M2(O)L2 [M2 = V(IV) (6)] and L1M2Cp2 [M2 = Ti(III) (10)] with L1 = (CO)5M1=C[C=NC(CH3)=CHS](O-)(M1 = Cr or W) and L2 = 4-methylthiazole or THF, are described. The molecular structures of these complexes determined by X-ray diffraction show that the Fischer-type carbene complexes act as bidentate ligands towards the second metal centre, coordinating through C(carbene)-attached O-atoms and imine N-atoms of the thiazolyl groups to form five-membered chelates with the oxygen atoms in the mer configuration. Isostructural complexes have similar characteristic band patterns in their far-IR spectra. Cyclic voltammetry of selected complexes reveals the oxidation of the carbene complex ligand between 1.01 and 1.29 V. Oxidation of the central metal (M2) takes place at 0.56 and 0.86 V for 7 and 9, respectively. Three stepwise reductions of Cr(III) to Cr(0) occur for 4a and 4b in the region -0.51 to -1.58 V. These new ligand types and other variants thereof should find application in ligand design with the first metal -- and other ligands attached thereto -- in the carbene complex ligand, playing an important role.     

Anion exchange separation of chromium and molybdenum from iron,vanadium, uranium and other elements in malonic acid solution

Summary Anion-exchange behaviour of chromium (III) and molybdenum (VI) was studied in malonate media. They form anionic complexes with malonic acid at pH 5.6. Various eluants, such as mineral acids and their salts were tested and a selectivity scale evolved. Cr and Mo were separated from Tl(I), alkali and alkaline earth elements by selective sorption and from Co(II), Ni(II), Mn(II), Zn(II) and Cd(II) by selective washing with water. They were separated from many other elements by selective elution. The sequential separation of Fe(III) V(IV), Cr(III), Mo(VI) and U(VI) was significant.     

Determination of niobium in pyrochlore ore by differential pulse polarography

A differential pulse polarographic method has been developed for the quantitative determination of niobium in pyrochlore ore. One-step polarographic curves were obtained in 0.01 mol L(-1) EDTA as supporting electrolyte. Analytical curves indicated that response was linearly dependent on Nb(V) concentration between 1.6 and 8.6 mg L(-1) in the pH range 2-5. The system is quasi-reversible and controlled by diffusion in 0.01 mol L(-1) EDTA as supporting electrolyte; the electrode process involves one-electron reduction of Nb(V) to Nb(IV). The results obtained so far for niobium in pyrochlore ore were comparable with those obtained by X-ray fluorescence determination. Ions such as Fe(III), Cr(III), As(III), Cu(II), Ni(II), Co(II), Mn(II), Sn(IV), Zn(II), V(V), Ta(V), W(VI), Ce(IV), and Ti(IV) did not interfere. Possible interference from Pb(II) can be avoided by complexation with the supporting electrolyte in the pH range 3.5 to 4.6; Mo(VI) ions can be tolerated when their concentration is one-tenth that of Nb(V).     

Chloroform extraction of ethyl xanthate complexes from sulphuric acid media

The chloroform extraction of 30 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Ce) from 0.1-8M sulphuric acid in the presence of potassium ethyl xanthate has been studied. Pd(II), Bi, As(III), Sb(III), Se(IV) and Te(IV) are completely extracted and Au(III) is largely extracted over the range of acid concentration investigated. Fe(II), Tl(I), Rh(III) and Cr(VI) are only slightly extracted and Se(VI), Te(VI), Ru(III), Cr(III), Mn(II), Zn, Ce(IV), Ir(IV) and Ge(IV) are not extracted at all. Depending on the acid concentration, the remaining elements are all partly extracted. Results are compared with those obtained in an earlier study of the extraction of xanthate complexes from hydrochloric acid media. The processes involved in the formation of some xanthate complexes and potential analytical separations are discussed.     

A new sensitive method for the spectrophotometric determination of molybdenum using 3-hydroxy-2-(2'-thienyl)-4H-chromen-4-one

A spectrophotometric method has been developed for the determination of Molybdenum (VI) using 3-hydroxy-2-(2'-thienyl)-4H-chromen-4-one as a complexing agent. The complex formed was dissolved in water in the presence of Triton X-100 and exhibits an absorption maximum at 410 nm. A large number of metal ions like Co(II), Ni(II), Mn(II), Cr(III), Zn(II), Cu(II), Hg(II), Bi(III), Fe(II), Fe(III), Zr(IV), V(V) can be tolerated at an appreciable concentrations. Molar absorptivity and Sandell's sensitivity of the method is 2.80 x 10(5) l mol-1cm-1 and 3.42 x 10(-4) micrograms cm-2, respectively. Beer's law is obeyed in the concentration range of 0.01-0.4 ppm Mo(VI). Aliquots containing 0.2 ppm of Mo(VI) give a mean absorbance of 0.56 with a relative standard deviation of 1.3%.     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Preparation, characterization and metal sorption studies of a Chrome-Azurol-S-loaded anion-exchange resin

Chrome Azurol S (CS) was mobilized on an strongly basic anion-exchange resin (Dowex 2 x 4, in Cl(-) form) by batch equilibration. The modified resin was stable in acetate buffer solution and in 0.1 M HCl and H(2)SO(4), but it was readily degraded with 2-6 M HCl and HNO(3). Retention of Ba(II), Sr(II), Ca(II), Mg(II), Al(III), Cr(III), Zn(II), Fe(III), Ti(IV), Mn(II), Co(II), Ni(II), Cu(II), Cd(II) and Pb(II) was studied using the batch equilibration method. The uptake and recovery yields were determined by using inductively-coupled plasma atomic emission spectroscopy (for Mg, Al, Cr, Ti, Fe, Mn, Ni, Zn, Cu, Cd and Pb) and atomic absorption spectrophotometry (for Ba, Sr, Ca and Co). The optimum pH value was established for performing a selective separation of Al(III) from the other metal ions. The sorption capacities of the CS-loaded resing for Al(III), Cr(III), Mg(II) (at pH 6), Fe(III) (at pH 5) and Ti(IV) (at pH 4) were 14, 2.9, 0.3, 3 and 3.9 mumoles g(-1) respectively. On this basis a method for separating Al(III) from other cations was established.     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Selective and quantitative separation of zinc and lead from other elements by cation-exchange chromatography in hydrohalic acid-acetone solutions

Zinc and lead can be separated from Cd, Bi(III), In and V(V) by eluting these elements with 0.2M hydrochloric acid in 60% acetone from a column of AG50W-X8 cation-exchange resin, zinc and lead being retained. Mercury(II), Tl(III), As(III), Au(III), Sn(IV), Mo(VI), W(VI) and the platinum metals have not been investigated quantitatively, but from their distribution coefficients, should also be eluted. Vanadium(V), Mo(VI) and W(VI) require the presence of hydrogen peroxide. Zinc and lead can be eluted with 0.5M hydrochloric acid in 60% acetone or 0.5M hydrobromic acid in 65% acetone and determined by AAS; the alkali and alkaline-earth metal ions, Mn(II), Co, Ni, Cu(II), Fe(III), Al, Ga, Cr(III), Ti(IV), Zr, Hf, Th, Sc, Y, La and the lanthanides are retained on the column, except for a small fraction of copper eluted with zinc and lead. Separations are sharp and quantitative. The method has successfully been applied to determination of zinc and lead in three silicate rocks and a sediment.     

Ion flotation behaviour of thirty-one metal ions in mixed hydrochloric/nitric acid solutions

The ion flotation of 31 metal ions in hydrochloric/nitric acid solution with the cationic surfactant cetylpyridinium chloride was investigated. A 25-ml portion of 0.27-2.87 x 10(-4)M metal ion and 1.8-6.0 x 10(-4)M cetylpyridinium chloride solution in 0.17-3.4M acid mixture ([HCl]:[HNO(3)] = 2.4:1) was subjected to flotation in a cell, 22.5 cm high and 4.0 cm in diameter, for 5 min, with nitrogen bubbles. Ir(IV), Pt(IV), Ge(IV), Sn(IV), Bi(III), Au(III), Tl(III), Pd(II) and Sn(II) were floated from solution in 95-100% yield; Ru(III), Rh(III), Ir(III), Hg(II), Ag(I) and Tl(I) were partly floated, while Cr(VI), Ti(IV), Zr(IV), Ga(III), In(III), Fe(III), Sb(III), Al(III), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), CD(II) and Pb(II) were floated with less than 20% yield. The flotation behaviour of these metal ions in the mixed acid system was compared with that in hydrochloric acid. The flotation is more efficient in the mixed acid system.     

Chloroform extraction of metal ethyl xanthates from hydrochloric acid media

The chloroform extraction of 32 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, Pb, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Ce, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Os) from O.1-10M hydrochloric acid media in the presence of potassium ethyl xanthate has been studied. The oxidation states in which some elements react, and potential analytical separations, are discussed. Pd(II), As(III) and Se(IV) are completely extracted as ethyl xanthate complexes, Te(IV) is almost completely extracted, and Au(III) is largely extracted over the range of acid concentration investigated. Mn(II), Zn, Rh(III), Ir(IV), Ru(III), Os(IV), Cr(III), Cr(VI), Ce(III) and Ce(IV) are not extracted. Ge is partly extracted from 6-10M media as the chloro-complex. Depending on the acid concentration, the remaining elements are all partially extracted as xanthate complexes.     

New insights on the mechanism of oxidation of D-galacturonic acid by hypervalent chromium

The pollutant Cr(VI) is known to be very carcinogenic. In conditions of excess of Cr(VI), oxidation of D-galacturonic acid (Galur), the major metabolite of pectin, yields d-galactaric acid (Galar) and Cr(III). The redox reaction takes place through a multistep mechanism involving formation of intermediate Cr(II/IV) and Cr(V) species. The mechanism combines one- and two-electron pathways for the reduction of Cr(IV) by the organic substrate: Cr(VI)→ Cr(IV)→ Cr(II) and Cr(VI)→ Cr(IV)→ Cr(III). This is supported by the observation of the optical absorption spectra of Cr(VI) esters, free radicals, CrO(2)(2+) (superoxoCr(III) ion) and oxo-Cr(V) complexes. Cr(IV) cannot be directly detected; however, formation of CrO(2)(2+) provides indirect evidence for the intermediacy of Cr(II/IV). Cr(IV) reacts with Galur much faster than Cr(V) and Cr(VI) do. The analysis of the reaction kinetics via optical absorption spectroscopy shows that the Cr(IV)-Galur reaction rate inversely depends on [H(+)]. Nevertheless, high [H(+)] still does not facilitate accumulation of Cr(IV) in the Cr(VI)-Galur mixture. Cr(VI) and the intermediate Cr(V) react with Galur at comparable rates; therefore the build-up and decay of Cr(V) accompany the decay of Cr(VI). The complete rate laws for the Cr(VI), Cr(V) and Cr(IV)-Galur redox reaction are here derived in detail. Furthermore, the nature of the five-co-ordinated oxo-Cr(V) bischelate complexes formed in Cr(VI)-Galur mixtures at pH 1-5 is investigated using continuous-wave and pulsed electron paramagnetic resonance (EPR) and density functional theory (DFT).     

Sorption-spectroscopy and test determination of uranium(VI) and iron(III) from a single sample on the solid phase of fiber materials filled with an AB-17 ion exchanger

Diffuse reflectance spectroscopy has been used for the study of the sorption of malonate and glycolate complexes of uranium(VI) and iron(III), present simultaneously in solution, onto the solid phase of fiber materials filled with an AB-17 anion exchanger. In the form of malonate complexes uranium(VI) is determined in 0.5 M HCl on substrate discs with immobilized Arsenazo III, while iron(III) is determined on substrate discs with potassium thiocyanate in 0.5 M HCl. The dependence of the analytical signals on the concentrations of U(VI) and Fe(III) is linear in the ranges 0.02–0.16 μg/mL; the detection limit is 0.01 μg/mL. The possibility of analysis of U(VI) and Fe(III) mixtures in ratio from 1: 5 to 5: 1 in the presence of 2-fold concentrations of Zr(IV), Th(IV), and Ti(IV), 5-fold concentrations of Bi(III), 10-fold concentrations of Cu(II), 20-fold concentrations of La(III), 100-fold concentrations of Ni(II) and Zn(II), and 200-fold concentrations of Co(II) and Ca(II) has been demonstrated. Standard color scales in the concentration range from 0.02 to 0.2 μg/mL have been used for the visual determination of uranium(VI) and iron(III).     

Solvent extraction and spectrophotometric determination of palladium(II) with 7-iodo-8-hydroxyquinoline-5-sulphonic acid

An extractive spectrophotometric procedure has been developed for the determination of palladium (II) at microgram levels. The palladium(II) chelate of 7-iodo-8-hydroxyquinoline-5-sulphonic acid is extracted into n-butanol. Extraction is maximal (95%) from 0.2M perchloric acid. Beer's law is valid at 430 nm over a wide range of palladium concentration from 2.5 ppm. The molar absorptivity is 958 1.mole(-1).mm(-1). The system can tolerate a large excess of Co(II), Ni(II), Rh(III), Pt(IV), Cr(III), W(VI), chloride, phosphate, citrate and tartrate. Small quantities of Ru(III), IR(III) and EDTA do not interfere, but serious interference is caused by Fe(III), V(V), Mo(VI) and Os(VIII).