Nanoindentation studies of polyimide thin films with various internal linkages in the diamine component

Polyimide thin films were synthesized from 3,3′,4,4′‐biphenyltetracarboxylic acid dianhydride (BPDA) and four different diamines (p‐phenylene diamine, 4,4′‐oxydiphenylene diamine, 4,4′‐biphenylene diamine, and 4,4′‐sulfonyldiphenylene diamine). The nanoindentation behavior of the resulting polyimides, namely, poly(p‐phenylene biphenyltetracarboximide) (BPDA‐PDA), poly(4,4′‐biphenylene biphenyltetracarboximide) (BPDA‐BZ), poly(4,4′‐oxydiphenylene biphenyltetracarboximide) (BPDA‐ODA), and poly(4,4′‐sulfonyldiphenylene biphenyltetracarboximide) (BPDA‐DDS), were investigated. Also, the morphological properties were characterized with a prism coupler and wide‐angle X‐ray diffraction and were correlated to the nanoindentation studies. The nanoindentation behavior and hardness varied quite significantly, depending on the changes in the chemical and morphological structures. The hardness of the polyimide thin films increased in the following order: BPDA‐DDS < BPDA‐ODA < BPDA‐BZ < BPDA‐PDA. For all the polyimide thin films, except that of BPDA‐BZ, the hardness decreased with an increase in the load. The birefringence, a measure of the molecular in‐plane orientation, increased in the following order: BPDA‐DDS < BPDA‐ODA < BPDA‐PDA < BPDA‐BZ. The X‐ray diffraction studies revealed that the crystallinity of the polyimide thin films varied with the changes in the chemical structure. The studies showed that the indentation response with an applied load and the hardness by nanoindentation for the BPDA‐based polyimides were closely related to the morphological structure. The nanoindentation and birefringence results revealed that the mechanical properties of the polyimide thin films were dependent on the crystallinity, which arose because of the chain order along the chain axis and the molecular packing order. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 861–870, 2004     

Stress behaviors and thermal properties of polyimide thin films depending on the different curing process

The effect of high boiling point solvent on the residual stress behaviors of semiflexible structure poly(4,4′‐oxydiphenylene pyromellitimide) (PMDA‐ODA) and pseudo‐rodlike poly(p‐phenylene biphenyltetracarboximide) (BPDA‐PDA) polyimide was investigated. As a solvent, a mixed solution of 20 wt % cyclohexyl‐2‐pyrrolidone (CHP; bp = 307 °C) and 80 wt % n‐methyl‐2‐pyrrolidone (NMP; bp = 202 °C) was used. The effects of solvent system and imidizing history on the morphological structure, as well as residual stress, were significantly high in the BPDA‐PDA having high chain rigidity, but relatively low in the semiflexible PMDA‐ODA with low chain rigidity. In addition, rapidly cured films prepared from PAA (NMP/CHP) showed higher residual stress and a lower degree of molecular anisotropy than slowly cured film imidized from PAA (NMP). This was induced by high chain mobility in polyimide thin films prepared from PAA (NMP/CHP) during the thermal cure process. Therefore, molecular anisotropy, depending on the solvent system and imidizing history, might be one of the important factors leading to low residual stress in polyimide thin films. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2879–2890, 2000     

Spectroscopic study of overtone and combination bands in aliphatic aldehydes

Overtone spectra of C–H stretching vibrations of formaldehyde, acetaldehyde and n-butyraldehyde have been studied in liquid phase using conventional absorption and thermal lens techniques. The overtone bands up to Δν = 4 have been monitored using the conventional IR and NIR techniques and the band involving Δν = 7 of the C–H stretching vibration with thermal lens technique. The vibrational frequencies and the anharmonicity constants for C–H stretching vibrations of the methyl as well as of the aldehyde groups for all the three molecules have been determined using these data. We have also calculated the vibrational frequencies of fundamental bands and charge distribution on carbon and hydrogen atoms using ab initio methods and the results are compared with the experimental data.     

Analysis of dimensionally stable copolyimide with a low‐level residual stress

Copolyimide thin film, which has low‐level stress and stress relaxation induced by water sorption, was characterized for potential applications as an encapsulant, a stress‐relief buffer, and in interlayer dielectrics. The polyimides examined were poly(p‐phenylene pyromellitimide) (PMDA‐PDA) and poly(p‐phenylene biphenyltetracarboximide) (BPDA‐PDA) as well as their random copolyimides with various compositions. These copolyimide films exhibited good combinations of physical and mechanical properties with low thermal expansion coefficients, residual stress, and moisture‐induced stress–relaxation behavior by appropriately selecting the ratios of the dianhydride component. For these polyimides, the residual stress increased in the range of −8.1–7.5 MPa, whereas stress relaxation induced by water uptake decreased in the range of 10.3–4.7 MPa with increasing BPDA contents, respectively. The major factor in determining the magnitude of the stress behavior induced by both the thermal mismatch and water uptake in films should be the morphological factors such as chain rigidity, chain orientation, crystallinity, and microvoids. Their morphological structures were examined by wide angle X‐ray diffraction and a prism coupler, and the thermal properties were measured using a dynamic mechanical thermal analyzer as well as thermomechanical analysis. Overall, the candidate for the low level stress buffer application from the PMDA/BPDA‐PDA copolyimide was the 30/70 (= PMDA/BPDA in molar ratio) copolyimide. This copolyimide showed no residual stress after curing at 400 °C and relatively insensitive stress relaxation to ambient humidity. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 796–810, 2001     

Improvement of thermoplasticity for s‐BPDA/PDA by copolymerization and blend with novel asymmetric BPDA‐based polyimides

Asymmetric biphenyl type polyimides (PI) derived from 2,3,3′,4′‐biphenyltetracarboxylic dianhydride (a‐BPDA) and p‐phenylenediamine (PDA) or 4,4′‐oxydianiline (ODA) show higher T_gs, and much better thermoplasticity than the corresponding isomeric PIs from symmetric 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (s‐BPDA). In addition, a‐BPDA‐derived PIs are completely amorphous owing to their bent chain structures and highly distorted conformations, whereas the PIs from s‐BPDA are semicrystalline. a‐BPDA‐derived PIs possessing these properties or the a‐BPDA monomer were used as a flexible blend component or a comonomer to improve the insufficient thermoplasticity of semirigid s‐BPDA/PDA homo polymer. The blends composed of s‐BPDA/PDA (80%) with a‐BPDA‐derived PIs (20%), as well as the s‐BPDA/PDA‐based copolymer containing 20% a‐BPDA, showed a certain extent of thermoplasticity above the T_gs without causing a decrease in T_g. In addition, these blends and copolymer provided comparatively low thermal expansion coefficient (ca. 18 ppm). The improved film properties for the blends are related to good blend miscibility. On the other hand, when s‐BPDA/ODA was used as a flexible matrix polymer instead of a‐BPDA‐derived PIs, the 80/20 blend film annealed at 400°C exhibited no prominent softening at the T_g. This result arises from annealing‐induced crystallization of the flexible s‐BPDA/ODA component. Thus, these results revealed that a‐BPDA‐derived PIs are promising candidates as matrix polymers for semirigid s‐BPDA/PDA for the present purpose. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2499–2511, 1999     

Preparation and absorption spectrum studies of aromatic and alicyclic poly(amide acid) ammonium salts in water and DMF and in films

A series of ammonium salts of poly(amide acid)s (PAS) were prepared from various poly(amide acid)s (PAA) with tertiary amines. The solubility of poly(amide acid) ammonium salts prepared from PAA(PMDA/ODA) in water is related to the ion concentration of tertiary amines. In order to elucidate the influence of the chemical structures of poly(amide acid)s and poly(amide acid) ammonium salts on their absorption spectra, pyromellitic dianhydride (PMDA), 3,3′,4,4 ′-biphenyltetracarboxylic dianhydride (BPDA), and 3,3′,4,4 ′-benzophenonetetracarboxylic dianhydride (BTDA) were chosen to react with p-phenylenediamine (PDA) and (4,4′-diaminodicyclohexyl)methane (DCHM) to give three kinds of aromatic PAAs and three kinds of alicyclic PAAs. The corresponding PASs were prepared by the reaction of PAAs with triethanolamine (TEA). Their ultraviolet–visible (UV–vis) absorption spectra were investigated compared to those of model compounds. A transparent film without absorption above 320 nm was obtained for PAS(PMDA/DCHM). The difference in absorption spectra of PAS(PMDA/PDA) from that of PAS(PMDA/DCHM) can be related to the existence of intra- and intermolecular charge transfer (CT) for PAS(PMDA/PDA). The absorption spectra of PASs with PDA in films are red shifted compared to those of corresponding PAAs in films, while the absorption spectra of PASs in water are blue shifted compared to those of corresponding PAAs in DMF. No differences in the absorption spectra of PAAs and PASs were found in DMF/H₂O (9/1) mixed solvent. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1329–1340, 1998     

Fourth overtone spectra of OH oscillators in simple alcohols

Fourth overtone (v = 5) spectra of the OH stretch of eight alcohols are reported. Well resolved bands are observed for different conformations of the hydroxyl group about the CO bond axis. Many of the bands exhibit coarse rotational structure, in contrast to overtone bands of CH oscillators in comparable sized hydrocarbons and benzene. Deuteration of the carbon skeleton of methanol, 2-propanol and t-butanol reveals additional structure in the OH overtone spectra.     

Study on hydration of poly(N-vinylcaprolactam) microgels by near-IR and mid-IR spectroscopy

Hydration of poly(N-vinylcaprolactam) microgels was investigated by near-infrared (NIR) and mid-infrared (MIR) spectroscopy. The thermosensitive microgels were prepared by emulsion polymerization, and turbidity, dynamic light scattering, and differential scanning calorimetry measurements were carried out. In MIR spectra, carbonyl bands consist of three components due to double, single, and zero hydrogen-bonding carbonyl groups as verified by density functional theory calculations. The relative intensities changed critically at the volume phase transition temperature upon heating. In NIR spectra, two absorbance peaks around 5,900?cm^?1 were observed, which can be assigned to the first overtone of C–H bands. Both of them undergo red shifts during the phase transition in a similar way to that of fundamental bands in MIR spectra. The result suggests that NIR spectroscopy may be a new general method that can provide new information for research on hydration of thermosensitive microgels.     

时间分辨傅立叶变换红外发射光谱技术研究叔丁基亚硝酸酯的光解动力学

利用时间分辨傅立叶变换红外(TR-FTIR)发射光谱技术对叔丁基亚硝酸酯355 nm激光光解动力学进行研究. 通过对实验观测到的光解产物NO的时间分辨红外发射谱进行分析, 获得了NO的转动温度和相对振动布居, 并发现了振动布居的反转现象. 结合前人的工作, 我们确认了光解产物NO的最大振动布居量子数υ与光解光激发的母体分子N=O伸缩振动的泛频跃迁所涉及的振动量子数υ*之间的关系为υ=υ*-1.     

The molecular structure of poly(biphenyl dianhydride-p-phenylenediamine) polyimide thin films by infrared spectroscopy: Thickness dependence of structure in the nano- to micrometer range

The molecular structure of poly[biphenyl dianhydride-p-phenylenediamine] (BPDA–PDA) polyimide in ultrathin (3–300 nm) films on silicon has been characterized by polarized infrared spectroscopy in conjunction with ellipsometry and X-ray reflectivity measurements. In spite of the high degree of crystalline packing of the polymer chains, the results show that an unexpected and significant content of imide rings exhibit local structural perturbations, including out-of-plane twisting. Further, the fraction of perturbed rings increases with increasing film thickness while, in contrast, the high degree of in-plane uniaxial film symmetry and planar stacking of the chains remain constant with thickness. These results reveal a new structural aspect of localized ring disorder that arises within the otherwise well-ordered, chain-stacked structure of BPDA–PDA polyimide films. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1247–1260, 1998     

High-speed monitoring of the crystallinity change in poly(lactic acid) during photodegradation by using a newly developed wide area NIR imaging system (Compovision)

We aimed to achieve wide area rapid monitoring of the crystallinity change in poly(lactic acid) (PLA) during photodegradation caused by ultraviolet (UV) light by using a newly developed near-infrared (NIR) camera (Compovison). Several kinds of PLA samples with different crystallinities and their blends with poly[(3)-(R)-hydroxybutyrate] were prepared. Their two-dimensional NIR spectra in the 1,000–2,350-nm region were measured by Compovision at a 5-min interval during photolysis. An intensity decrease of the band in the 1,900-1,925-nm region due to the second overtone of the C = O stretching vibration of PLA was observed during photolysis. This suggests that an anhydride carbonyl is produced during photolysis. The NIR image of the crystallinity change monitored by the band at 1,917 nm in the standard normal variate spectra clearly shows the inhomogeneity of crystal evolution. A logarithmic increase was observed for all identified areas in the PLA film; however, the time to reach the maximum crystallinity was slightly different according to the initial crystallinity of the sample. It is likely that the initial crystallinity of the sample influences the degradation speed more than the degradation amount. These imaging results have provided fundamental chemical insights into the photolytic process for PLA, and at the same time they have demonstrated that the two-dimensional spectral data obtained by Compovision are useful for process monitoring of polymers.     

Investigation of infrared calibration methods for application to the study of methyl methacrylate polymerization

Infrared spectroscopy has been used to monitor the polymerization of methyl methacrylate. Concentrations of methyl methacrylate in the reaction mixture were determined by use of three calibration methods. Classical quantitative analysis was used to measure the height of the stretching vibration bands of the vinyl group at 1639 cm^–1. A calibration procedure using the considerably higher intensity of the C = O stretching vibration band of the carbonyl ester group at 1725 cm^–1 seemed useful only for high concentrations of methyl methacrylate, i.e. at the beginning of reaction, because this band overlaps that of poly(methyl methacrylate). Use of second-derivative spectra and measuring their values at 1725 cm^–1 enabled estimation of ten times lower concentrations of methyl methacrylate the calibration using the band from the vinyl group.     

Classical trajectory calculations of intramolecular vibrational energy redistribution. I. Methanol-water complex

Intramolecular vibrational energy redistributions of the O-H stretching (nuOH) vibration for the methanol monomer and its water complex, the methanol-water dimer, are investigated by using ab initio full-dimensional classical trajectory calculations. For the methanol monomer, in the high-energy regime of the 5nuOH overtone, the time dependence of the normal-mode energies indicates that energy flowed from the initial excited O-H stretching mode to the C-H stretching mode. This result confirms the experimental observation of energy redistribution between the O-H and C-H stretching vibrations [L. Lubich et al., Faraday Discuss. 102, 167 (1995)]. Furthermore, a lot of dynamical information in the time domain is contained in the power spectra, whose density is given by the Fourier transformation of the total momentum obtained from trajectory calculations. For the methanol-water hydrogen-bonded complex, at the high-energy level of the 5nuOH overtone, the calculated power spectrum shows considerable splitting and broadening, indicating significant energy redistribution through strong coupling between the O-H stretching vibration and other vibrations. It is thus clear that the A-H...B hydrogen-bond formation facilitates energy redistribution subsequent to the vibrational excitation of the hydrogen-bonded A-H stretching mode.     

Study of the binding sites in the biomass of <Emphasis Type="Italic">Aspergillus niger</Emphasis> wild-type strains by FTIR spectroscopy

Fourier transform infrared (FTIR) spectroscopy studies were performed to confirm and to provide information on the identity and binding characteristics of the chemical groups responsible for the binding of elements using Aspergillus niger (A. niger) wild-type strains. Two absorption bands in the 3690–3615 and 2970–2895 cm^?1 regions can characterize stretching vibrations OH and CH groups in fatty acids, respectively, and intensive bands around of 1600 cm^?1 and by 1048 cm^?1 correspond to stretching vibrations of C=O groups of amides (amide I) or stretching vibrations ν(C–N). The FTIR results confirmed that no extra differences between IR spectra of A. niger in raw biomass and in solid rest after extraction with chloroform were observed. The small differences were observed in IR spectra of A. niger in chloroform after extraction.     

High strength electrospun polymer nanofibers made from BPDA-PDA polyimide

A series of high molecular weight PI precursors, poly(p-phenylene biphenyltetracarboxamide acid), were synthesized from 3,4,3′,4′-biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) by using intense mechanical stirring at −15 to 0 °C for 48-72 h. The as-synthesized PI precursor solution was used to make BPDA/PDA polyimide thin films and electrospun nanofibers. IR, Ostward Viscometer, CMT-8102 Electromechanical Universal Testing Machine and scanning electron microscope (SEM) were used for the characterizations of the as-synthesized PI precursor, PI films and nanofiber sheets. The high molecular weight BPDA/PDA PI thin films and electrospun nanofiber sheets possess excellent mechanical properties of up to 900 MPa tensile strength with up to 18.0 GPa E-modulus and up to 210 MPa tensile strength with up to 2.5 GPa E-modulus, respectively.     

Dielectric properties of oxydianiline‐based polyimide thin films according to the water uptake

For polyimide thin films, the dielectric properties were investigated with the capacitance and optical methods. The dielectric constants of the 4,4′‐oxydianiline (ODA)‐based polyimide thin films varied from 2.49 to 3.10 and were in the following decreasing order: 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA)–ODA > 1,2,4,5‐benzenetetracarboxylic dianhydride (PMDA)–ODA > 4,4′‐hexafluoroisopropylidene diphthalic dianhydride (6FDA)–ODA. According to the absorption of water, the diffusion coefficients in the films varied from 4.8 × 10^?10 to 7.2 × 10^?10 cm²/s and were in the following increasing order: BPDA–ODA < PMDA–ODA < 6FDA–ODA. The dielectric constants and diffusion coefficients of the polyimides were affected by the morphological structures, including the molecular packing order. However, because of the water uptake, the changes in the dielectric constants in the polyimide thin films varied from 0.49 to 1.01 and were in the following increasing order: BPDA–ODA < 6FDA–ODA < PMDA–ODA. Surprisingly, 6FDA–ODA with bulky hexafluoroisopropylidene groups showed less of a change in its dielectric constant than PMDA–ODA. The total water uptake for the polyimide thin films varied from 1.43 to 3.19 wt % and was in the following increasing order: BPDA–ODA < 6FDA–ODA < PMDA–ODA. This means that the changes in the dielectric constants in the polyimide thin films were significantly related to the morphological structure and hydrophobicity of hexafluoroisopropylidene groups. Therefore, the morphological structure and chemical affinity in the polyimide thin films were important factors in controlling the dielectric properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2190–2198, 2002     

Mode-selective O-H stretching relaxation in a hydrogen bond studied by ultrafast vibrational spectroscopy

The ultrafast relaxation of the excited O-H stretching vibration is studied by ultrafast infrared-pump/infrared-probe and infrared-pump/Raman-probe spectroscopy. We demonstrate a 200 fs lifetime of the hydrogen-bonded O-H stretching mode in 2-(2'-hydroxy-5'-methyl-phenyl)benzotriazole (TINUVIN P). O-H stretching relaxation occurs through a few major channels that all involve combination and overtone bands of modes with considerable in-plane O-H bending character. In particular, the mode, which contains the largest O-H bending contribution, plays a prominent role for primary processes of intramolecular vibrational energy redistribution. Theoretical calculations of vibrational energy transfer rates based on a Fermi golden rule approach account for the experimental findings.     

Solvent dependence of absorption intensities and wavenumbers of the fundamental and first overtone of NH stretching vibration of pyrrole studied by near-infrared/infrared spectroscopy and DFT calculations

Near-infrared (NIR) and IR spectra were measured for pyrrole in CCl(4), CHCl(3), and CH(2)Cl(2) to study solvent dependence of absorption intensities and wavenumbers of the fundamental and first overtone of NH stretching vibration. It was found that the wavenumbers of the NH fundamental and its first overtone decrease in the order of CCl(4), CHCl(3), and CH(2)Cl(2), which is the increasing order for of the dielectric constant of the solvents. Their absorption intensities increase in the same order, and the intensity increase is more significant for the fundamental than the overtone. These results for the solvent dependence of the wavenumbers and absorption intensities of NH stretching bands of pyrrole are quite different from those due to the formation of hydrogen bonds. Quantum chemical calculations of the wavenumbers and absorption intensities of NH stretching bands by using the 1D Schr?dinger equation based on the self-consistent reaction field (SCRF)/isodensity surface polarized continuum model (IPCM) suggest that the decreases in the wavenumbers of both the fundamental and the overtone of the NH stretching mode with the increase in the dielectric constant of the solvents arise from the anharmonicity of vibrational potential and their intensity increases come from the gradual increase in the slope of the dipole moment function.     

NMR investigations of phase transition in aqueous polymer solutions and gels

The use of NMR spectroscopy in investigations of phase transitions in aqueous polymer solutions and gels is reviewed. Results on this subject as obtained mostly for thermoresponsive polymers (e.g., poly(N-isopropylacrylamide) and its copolymers, poly(N-isopropylmethacrylamide) and its copolymers, poly(vinyl methyl ether)) from temperature dependences of ¹H and ¹³C NMR spectra, spin–lattice and spin–spin relaxation times, diffusion coefficients and NMR images are discussed.     

Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002