Synthesis and alignment of silver nanorods and nanowires and the formation of Pt, Pd, and core/shell structures by galvanic exchange directly on surfaces

Here we describe the synthesis of Ag nanorods (NRs) (aspect ratio <20) and nanowires (NWs) (aspect ratio > or =20) directly on surfaces by seed-mediated growth. The procedure involves attaching gold seed nanoparticles (Au NPs) to 3-mercaptopropyltrimethoxysilane (MPTMS)-functionalized silicon or glass surfaces and growing them into NRs/NWs by placing the substrates into a solution containing cetyltrimethylammonium bromide (CTAB), silver nitrate, and ascorbic acid with the pH ranging from 7 to 12. Under our conditions, Ag NRs/NWs grow optimally at pH 10.6 with a 3% yield, where spherical, triangular, and hexagonal nanostructures represent the other byproducts. The length of Ag NRs/NWs ranges from 50 nm to more than 10 microm, the aspect ratio (AR) ranges from 1.4 to >300, and the average diameter is approximately 35 nm. Approximately 40% of the 1D structures are NRs, and 60% are NWs as defined by their ARs. We also report the alignment of Ag NRs/NWs directly on surfaces by growing the structures on amine-functionalized Si(100) surfaces after an amidation reaction with acetic acid and a method to improve the percentage of Ag NRs/NWs on the surface by removing structures of other shapes with adhesive tape. Surface-grown Ag NRs/NWs also react with salts of palladium, platinum, and gold via galvanic exchange reactions to form high-surface-area 1D structures of the corresponding metal. The combination of the seed-mediated growth of Ag on Au NRs followed by the galvanic exchange of Ag with Pd leads to interesting core/shell NRs grown directly on surfaces. We used scanning electron microscopy, UV-vis spectroscopy, and X-ray photoelectron spectroscopy to characterize the surface-grown nanostructures.     

Preparation and magnetic properties of Cu-ferrite nanorods and nanowires

An aqueous solution method has been developed for preparing Cu-ferrite nanorods (NRs) array and nanowires (NWs) on Cu substrate. The Cu-ferrite NRs exhibit a clear uniaxial anisotropy with the easy axis along rods. The decrease of the reduced remanence from 0.24 in the parallel magnetic field to almost zero in the perpendicular field shows a strong effect of the demagnetizing field perpendicular to the rod axis. The weaker uniaxial anisotropy makes NWs the lower saturation magnetization.     

Improvement of the performance of dye sensitized solar cell using ZnO nanorods array deposited with Ag nanoparticles as photoanode

Well-aligned zinc oxide (ZnO) nanorods (NRs) arrays deposited with Ag nanoparticles (NPs) are prepared by a liquid phase epitaxial growth process followed by a reduction of Ag on the surface of the ZnO NRs. Transmission electron microscopy images show that most Ag NPs are deposited on the upper part of the ZnO NRs, and the overall optical absorption in the range of visible light can be enhanced due to the surface plasmon resonance of the Ag NPs. ZnO NRs with and without Ag NPs are used to assemble dye sensitized solar cells. Devices fabricated from the Ag NPs/ZnO NRs composite arrays exhibit a higher open voltage, short circuit current and fill factor than that fabricated from the bare ZnO NRs array, thus, the overall efficiency of the as-fabricated cell is increased from less than 0.5?% to 0.8?%. The main reason for the enhancement of the device performance may be ascribed to that the electron transfer back from ZnO to the dye and electrolyte is blocked by the Schottky barrier at the Ag/ZnO interface, resulting in a great increase of the electron density at the ZnO conduction band.     

银/金纳米线阵列表面增强拉曼基底的制备及对孔雀石绿的高灵敏度检测

利用种子介导的软模板生长方法制备了金纳米线(Au NWs)阵列, 通过调节生长温度控制Au NWs阵列的形貌, 最后在经硼氢化钠(NaBH₄)清洗过的Au NWs阵列上化学沉积银纳米颗粒(Ag NPs), 制得银/金纳米线(Ag/Au NWs)阵列作为表面增强拉曼散射(SERS)基底. 选用罗丹明6G(R6G)作为拉曼探针分子测定了Ag/Au NWs阵列的SERS性能. 结果表明, Ag/Au NWs阵列作为SERS基底具有高灵敏度、 优异的信号均匀性和良好的稳定性. 使用Ag/Au NWs阵列对孔雀石绿(MG)检测的检出限可低至1×10^-8 mol/L, 线性范围为 1×10^-8~1×10^-4 mol/L. NaBH₄可以在不影响SERS性能的情况下去除Ag/Au NWs阵列上吸附的分子, 使得 SERS基底可以重复使用. 使用Ag/Au NWs阵列对湖水中的MG进行检测, 得到了可靠的回收率, 证明Ag/Au NWs 阵列在检测环境水体中的孔雀石绿上具有应用潜力.     

Synthesis of single crystal Sn-doped In(2)O(3) nanowires: size-dependent conductive characteristics

Single crystalline Sn doped In(2)O(3) (ITO) NWs (nanowires) were synthesized via an Au-catalyzed VLS (vapor-liquid-solid) method at 600 °C. The different sizes (～20, ～40, ～80 nm) of the Au NPs (nanoparticles) provided the controllable diameters for ITO NWs during growth. Phase and microstructures confirmed by high-resolution transmission electron microscope images (HRTEM) and X-ray diffraction (XRD) spectra indicated that the phase of In(2)O(3) NWs had a growth direction of [100]. X-ray photoelectron spectroscopy (XPS) was employed to obtain the chemical compositions of the ITO NWs as well as the ratio of Sn/In and oxygen concentrations. The findings indicated that low resistivity was found for ITO NWs with smaller diameters due to higher concentrations of oxygen vacancies and less incorporation of Sn atoms inside the NWs. The resistivity of NWs increases with increasing diameter due to more Sn atoms being incorporated into the NW and their reduction of the amount of oxygen vacancies. Low resistivity NWs could be achieved again due to excess Sn atoms doped into the large diameter NWs. Therefore, by optimizing the well-controlled growth of the NW diameter and interface states, we are able to tune the electrical properties of Sn-doped ITO NWs.     

Organic‐Stabilizer‐Free Polyol Synthesis of Silver Nanowires for Electrode Applications

The polyol reduction of a Ag precursor in the presence of an organic stabilizer, such as poly(vinylpyrrolidone), is a widely used method for the production of Ag nanowires (NWs). However, organic capping molecules introduce insulating layers around each NW. Herein we demonstrate that Ag NWs can be produced in high yield without any organic stabilizers simply by introducing trace amounts of NaCl and Fe(NO₃)₃ during low‐temperature polyol synthesis. The heterogeneous nucleation and growth of Ag NWs on initially formed AgCl particles, combined with oxidative etching of unwanted Ag nanoparticles, resulted in the selective formation of long NWs with an average length of about 40 μm in the absence of a capping or stabilizing effect provided by surface‐adsorbing molecules. These organic‐stabilizer‐free Ag NWs were directly used for the fabrication of high‐performance transparent or stretchable electrodes without a complicated process for the removal of capping molecules from the NW surface.     

Si衬底上生长的铁硅化合物结构和取向分析

采用分子束外延法分别在650-920℃的Si(110)和920℃的Si(111)衬底表面生长出铁的硅化物纳米结构,并主要分析了920℃高温下纳米结构的形貌、组成相及其与Si衬底的取向关系.扫描隧道显微镜(STM)研究表明,920℃高温下,Si(110)衬底上生长的铁硅化合物完全以纳米线的形式存在,且其尺寸远大于650℃低温下外延生长的纳米线尺寸;Si(111)衬底上生长出三维岛和薄膜两种形貌的铁硅化合物,其中三维岛具有金属特性且直径约300 nm、高约155 nm,薄膜厚度约2 nm.电子背散射衍射研究表明920℃高温下Si(110)衬底上生长的纳米线仅以β-FeSi2的形式存在,且β-FeSi2相与衬底之间存在唯一的取向关系:β-FeSi2(101)//Si(11 1);β-FeSi2[010]//Si[110];Si(111)衬底上生长的三维岛由六方晶系的Fe2Si相组成,Fe2Si属于164空间群,晶胞常数为a=0.405 nm,c=0.509 nm;与衬底之间的取向关系为Fe2Si(001)∥Si(111)和Fe2Si[1 20]//Si[112].     

Pt3Te4 nanoparticles from tellurium nanowires

We report the synthesis of platinum telluride nanoparticles (Pt(3)Te(4) NPs) in the solution phase at room temperature using a template-assisted method. The dendrimeric aggregates formed are composed of several small units of Pt(3)Te(4) NPs of ～4 nm diameter. Tellurium nanowires (Te NWs) are used as the template and the reducing agent in the growth of NPs which occurs due to the galvanic replacement reaction between Te NWs and PtCl(6)(2-). Surface-enhanced Raman scattering (SERS) of the dispersed Pt(3)Te(4) NPs was studied using crystal violet (CV) as the analyte. SERS sensitivity up to 10(-8) M of CV was observed. The Raman enhancement factor (EF) of adsorbed CV on NP aggregates was calculated to be 1.74 × 10(5). The catalytic ability of the as-synthesized Pt(3)Te(4) NPs for the reduction of 4-nitrophenol (4-NP) was studied.     

Si衬底上生长的铁硅化合物结构和取向分析

采用分子束外延法分别在650-920 ℃的Si（110）和920 ℃的Si（111）衬底表面生长出铁的硅化物纳米结构,并主要分析了920 ℃高温下纳米结构的形貌、组成相及其与Si 衬底的取向关系. 扫描隧道显微镜（STM）研究表明,920 ℃高温下,Si（110）衬底上生长的铁硅化合物完全以纳米线的形式存在,且其尺寸远大于650 ℃低温下外延生长的纳米线尺寸;Si（111）衬底上生长出三维岛和薄膜两种形貌的铁硅化合物,其中三维岛具有金属特性且直径约300 nm、高约155 nm,薄膜厚度约2 nm. 电子背散射衍射研究表明920 ℃高温下Si（110）衬底上生长的纳米线仅以β-FeSi₂的形式存在,且β-FeSi₂相与衬底之间存在唯一的取向关系：β-FeSi₂（101）//Si（111）;β-FeSi₂ [010]//Si[110];Si（111）衬底上生长的三维岛由六方晶系的Fe₂Si 相组成,Fe₂Si 属于164 空间群,晶胞常数为a=0.405 nm,c=0.509 nm;与衬底之间的取向关系为Fe₂Si（001）∥Si（111）和Fe₂Si[120]//Si[112].     

Preparation of Ag Nanowire @ Au Nanoparticle Hybrid Nanowires and their Influence on the Fluorescence Properties of P3HT

In this study, the galvanic displacement reaction between silver and AuCl₄⁻ was carried out to synthesize a series of silver nanowire (Ag NW) @ gold nanoparticle (Au NP) hybrid nanowires. The influence of Ag NW @ Au NP hybrid nanowires on the fluorescence properties of the poly (3‐hexylthiophene) (P3HT) was investigated. The particle sizes of Au NPs on the hybrid nanowires could be adjusted by varying the reaction time and the concentration of the HAuCl₄ solution. Furthermore, steady‐state fluorescence measurements showed that the fluorescence intensity of the P3HT films was higher on various Ag NW @ Au NP hybrid nanowires compared to that on a bare silicon substrate. This was due to the increase in the intensity of electromagnetic field by the localized surface plasmon resonances of Au NPs and surface plasmon polaritons of Ag NWs from the hybrid nanowires. The results were further confirmed by the Raman spectra of the P3HT films on different substrates.     

Phase-controlled growth of metastable Fe5Si3 nanowires by a vapor transport method

We report the synthesis of single-crystalline nanowires (NWs) of metastable Fe5Si3 phase via an iodide vapor transport method. Free-standing Fe5Si3 NWs are grown on a sapphire substrate placed on a Si wafer without the use of any catalyst. The typical size of the Fe5Si3 nanowires is 5-15 microm in length and 100-300 nm in diameter. Synthesis of the metastable phase is induced by composition-dependent nucleation from the gas-phase reaction. Depending on the concentration ratio of FeI2(g) to SiI4(g), different phases of iron silicides are formed. The growth of nanowires is facilitated by the initial nucleation of silicide particles on the substrate and further self-seeded growth of the NWs. The present work not only provides a method for the synthesis of metastable Fe5Si3 nanowires but also suggests that the phase controlled synthesis can be further optimized to produce other metal-rich silicide nanostructures for future spintronic devices.     

Ultralong PtPd Alloyed Nanowires Anchored on Graphene for Efficient Methanol Oxidation Reaction

The rational synthesis of Pt-based alloyed nanowires still remains a great challenge because of the different reduction potentials between Pt and another metal and the intrinsic feature of isotropic growth in face-centered cubic (fcc) structured Pt. In this work, PtPd alloyed nanowires with ultrahigh aspect ratio anchored on graphene (PtPd NWs/graphene) were synthesized by a facile solvothermal method without the use of any templates or surfactants. Due to the integration of ultralong PtPd nanowires and stable graphene support, PtPd NWs/graphene exhibited outstanding electrochemical activity toward methanol oxidation reaction (MOR) in comparison with pure Pt NWs/graphene and commercial Pt/C catalysts. Meanwhile, PtPd NWs/graphene had a much higher current density than Pt NWs/graphene and commercial Pt/C catalysts at a constant potential for 7200s in alkaline methanol solution. Moreover, after 1000 cycles of durability testing, PtPd NWs/graphene retained 89.2% of its initial mass activity, much superior to the 63.7% retained for commercial Pt/C.     

Metallogel Template Fabrication of pH‐Responsive Copolymer Nanowires Loaded with Silver Nanoparticles and Their Photocatalytic Degradation of Methylene Blue

Poly(N,N′‐methylenebisacrylamide–4‐vinylpyridine) (P(MBA‐4VP)) nanowires loaded with silver nanoparticles (Ag NPs) have been fabricated by silver metallogel template copolymerization, and subsequently, silver ions are reduced instead of the template being removed. Ag NPs with a diameter of 5–15 nm were dispersed throughout the core of P(MBA‐4VP) nanowires. The size and distribution of the formed Ag NPs could be finely controlled by reduction time. The pH sensitivity of P(MBA‐4VP) nanowires offers the possibility of Ag NP release from the nanowires under acidic conditions. The photocatalytic performance of the P(MBA‐4VP) nanowires loaded with Ag NPs was evaluated for the degradation of methylene blue (MB) under UV light irradiation. Their rate of degradation is dependent on the content and size of the Ag NPs, as well as the pH values of the MB solution. Moreover, the P(MBA‐4VP) nanowires loaded with Ag NPs exhibited high photostability, and the photocatalytic efficiency reduced by only 1.81 % after being used three times.     

Solution-based growth and structural characterization of homo- and heterobranched semiconductor nanowires

Colloidal homobranched ZnSe nanowires (NWs) and heterobranched CdSe-ZnSe NWs are successfully synthesized by combining a sequential seeding strategy with the solution-liquid-solid (SLS) growth process. We have developed an efficient approach to deposit secondary bismuth nanoparticles onto the NW backbone to induce the subsequent SLS branch growth. The density, length, and diameter of branches are rationally controlled by varying reaction conditions. Structural characterization reveals that crystalline branches grow epitaxially from the backbone in both homo- and heterobranched NWs. Two different branching structures are observed in the CdSe-ZnSe heterobranched NWs, owing to the phase admixture, i.e., cubic and hexagonal crystal structures, coexisting in the CdSe NW backbones. These branched NWs with well-designed architectures are expected to have potential as three-dimensional building blocks in the fabrication of nanoscale electronics and photonics.     

From Precursor Powders to CsPbX3 Perovskite Nanowires: One‐Pot Synthesis,Growth Mechanism,and Oriented Self‐Assembly

The colloidal synthesis and assembly of semiconductor nanowires continues to attract a great deal of interest. Herein, we describe the single‐step ligand‐mediated synthesis of single‐crystalline CsPbBr₃ perovskite nanowires (NWs) directly from the precursor powders. Studies of the reaction process and the morphological evolution revealed that the initially formed CsPbBr₃ nanocubes are transformed into NWs through an oriented‐attachment mechanism. The optical properties of the NWs can be tuned across the entire visible range by varying the halide (Cl, Br, and I) composition through subsequent halide ion exchange. Single‐particle studies showed that these NWs exhibit strongly polarized emission with a polarization anisotropy of 0.36. More importantly, the NWs can self‐assemble in a quasi‐oriented fashion at an air/liquid interface. This process should also be easily applicable to perovskite nanocrystals of different morphologies for their integration into nanoscale optoelectronic devices.     

Synthesis and Crystal Structures of Gold Nanowires with Gemini Surfactants as Directing Agents

The preparation of crystalline gold nanowires (NWs) by using gemini surfactants as directing agents through a three‐step seed‐mediated method is reported. Unlike the nanorods with relatively low aspect ratios (typically below 20) obtained by using cetyltrimethylammonium bromide as a directing agent, the NWs obtained in this investigation can reach up to 4.4 μm, and the largest aspect ratio is calculated to be 210. For this, each of seven different gemini surfactants are utilized as directing agents, and the length and/or aspect ratio of the NWs can be tuned by varying the hydrocarbon chain lengths of the gemini surfactants. Both single and twinned crystalline structures are elucidated by selected‐area electron diffraction and high‐resolution transmission electron microscopy studies. The use of gemini surfactants not only advances the synthesis of gold nanostructures, but improves the understanding of the growth mechanism for seed‐mediated growth.     

Ag Nanowire‐Ag Nanoparticle Hybrids for the Highly Enhanced Fluorescene Detection of Protoporphyrin IX Based on Surface Plasmon‐Enhanced Fluorescence

In this study, we developed an approach to fabricate novel 1D Ag NWs‐Ag NPs hybrid substrate for enhanced fluorescene detection of protoporphyrin IX (PpIX) based on surface plasmon‐enhanced fluorescence. The Ag NWs‐Ag NPs hybrid was synthesized by combining the hydrothermal method and self‐assembly method with the asisstance of polyvinylpyrrolidone (PVP). When the Ag NWs‐Ag NPs hybrid was deposited on the glass substrate and employed as active substrate to detect PpIX, the fluorescence intensity of PpIX was enhanced greatly due to the coupling effect of localized surface plasmon‐localized surface plasmon (LSP‐LSP) and localized surface plasmon‐surface plasmon propagation (LSP‐SPP) which induced great enhancement of the electromagnetic field. Furthermore, the enhancement effect was approximately linear when the concentration of PpIX was ranged from 1×10^?7 mol/L to 2×10^?5 mol/L, and the photobleaching phenomenon of PpIX was reduced greatly, indicating that the fabricated Ag NWs‐Ag NPs hybrid substrate had well performance for PpIX imaging. This work provides an effective approach to prepare highly sensitive and stable fluorescence enhancement substrate, and has great potential application in fluorescence imaging.     

Enhanced electrical properties of PEDOT:PSS via synergistic effect

As a representing conducting polymer, poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) has been widely employed in organic electronics. However, the electrical conductivity for pristine PEDOT:PSS is only between 0.1 and 0.5 S/cm. In order to enhance the conductivity, the silver nanowires (Ag NWs) were synthesized to dope PEDOT:PSS. It was found the electrical conductivity of PEDOT:PSS was improved to about 200 S/cm with Ag NWs. When double-wall carbon nanotube (DWCNT) was employed together with Ag NWs, the electrical conductivity was further improved to over 2800 S/cm. We proposed the synergistic working model between Ag NWs and CNTs for such enhancement. In this work, UV-vis-NIR spectra and SEM images were also employed to investigate the mechanism of electrical conductivity enhancement.     

Internally dispersed synthesis of uniform silver nanoparticles via in situ reduction of [Ag(NH3)2]+ along natural microfibrillar substructures of cotton fiber

Silver nanoparticles (Ag NPs) are known to have efficient antimicrobial properties, but the direct application of Ag NPs onto the surface of textiles has shown to be ineffective and raise environmental concerns because Ag NPs leach out during washing. In this study, non-leaching and stable Ag-cotton nanocomposite fiber was produced by the in situ formation of Ag NPs inside the cotton fiber. The reported method is to introduce a nanofluidic system in alkali-swollen cotton fiber. Sequential flows of [Ag(NH₃)₂]⁺ and reductant aqueous fluids into the opened microfibrillar channels yielded a self-assembly of Ag ions on the deprotonated cellulose and subsequent nucleation and particle growth on the microfibrils. Transmission electron and field emission scanning electron microscopy images showed Ag NPs evenly dispersed throughout the entire cross-section of the fiber and their fixation onto the isolated secondary cell wall, respectively. Despite the rapid reduction reaction and the absence of a stabilizing agent, the successful formation of monodispersed Ag NPs (12 ± 3 nm) was attributed to the self-controlled function of the highly organized microfibrillar substructures, which regulated the transport and mixing of reactants. Incorporation of Ag NPs into the internal structure of the cotton fiber did not significantly influence the cotton crystalline structure.     

Structure-induced enhancement in electrooxidation of trimetallic FePtAu nanoparticles

Using FePtAu nanoparticles (NPs) as an example, this Communication demonstrates a new structure-control strategy to tune and optimize NP catalysis. The presence of Au in FePtAu facilitates FePt structure transformation from chemically disordered face-centered cubic (fcc) structure to chemically ordered face-centered tetragonal (fct) structure, and further promotes formic acid oxidation reaction (FAOR). The fct-FePtAu NPs have mass activity as high as 2809.9 mA/mg Pt and retain 92.5% of this activity after a 13 h stability test. They become the most efficient NP catalyst ever reported for FAOR. This structure-control strategy can be extended to other multimetallic NP systems, providing a general approach to advanced NP catalysts with desired activity and durability control for practical applications.