Optical characterization of pigments by reflectance spectroscopy in support of UV laser cleaning treatments

The study of optical properties of artwork materials is of fundamental importance for laser-based restoration techniques. In this work, reflectance spectroscopic measurements and colorimetric analyses of painted wooden models were performed to discriminate between pigments on the basis of their spectral features. In particular, the spectral reflection factors of different white pigments were recorded with a fibre optics reflectance spectroscopy module, both before and after excimer laser (248 nm) irradiation. Colour data were obtained and monitored with an integrating sphere spectrophotometer and expressed with the CIE L^*a^*b^* colour coordinates. Moreover, the laser-induced morphological changes of the samples were investigated by scanning electron microscopy. PACS  42.62-b; 61.80.Ba; 07.60.Dq     

Synthetic organic pigments in contemporary Balinese painting: a Raman microscopy study

The colour palette from two 20th century and one 21st century Indonesian paintings from the island of Bali was determined by Raman microscopy. There is very little information concerning the artistic techniques from this region of the world and the influences in materials introduced by western artists. The most interesting finding of our study was the increasing substitution of natural pigments by modern synthetic organic pigments. The findings were also compared with samples of representative pigments commonly used by Bali artists, donated by a renowned Balinese painter. Raman microscopy, combined with Fourier transform infrared spectroscopy, high‐performance liquid chromatography and μ‐EDXRF, was able to separate the different components on several colours, and to identify both synthetic organic pigments and inorganic components. Three azo pigments from the diarylide subclass, PY 83, PY 55 and PO 16, were identified on the yellow, brown, red and orange colours. A copper phthalocyanine blue PB 15:x and a basic dye BB 26 were responsible for the blue colours, the former admixed with ultramarine blue. Goethite was sometimes introduced to create the green colour. Two other basic dyes, BY2 and PG 4, were the main chromophores of the yellow and green samples of local pigments. The inorganic pigments comprised bone white, bone black, carbon‐based black pigment, haematite, goethite, vermilion, ultramarine blue and anatase. Finally, the ground layer of all the paintings was identified as rice starch, with a double function of a white pigment. Copyright © 2012 John Wiley & Sons, Ltd.     

Spectral imaging system for non-contact colour measurement

This paper describes the development of a non-contact system for measuring colour of printed material at web speeds. The system proposed uses a non-contact spectrophotometer based on a holographic grating, in conjunction with a conventional monochrome area scan camera, from which colour spectral data is extracted, whilst a xenon flash is used to illuminate colour samples. Software and hardware details of the system are given, along with the underlying mathematics for colour space conversion and measurement. Conversion equations from X, Y, Z chromaticity co-ordinates to the RGB system are presented, and also equations to convert from the L^*a^*b^* colour space to X, Y, Z chromaticity co-ordinates. Experimental results are presented whereby the non-contact spectral system is shown to perform to a colour tolerance exceeding that of conventional colour video systems.     

Characterisation and differentiation of pigments employed on the façade of “Noto’s Valley” monuments (Sicily)

Most of the “Noto’s Valley” monuments façades, located in different towns of Sicily such as Ragusa Ibla, Modica and Noto, present different colours and in many cases the towns themselves are characterized by evident chromatic variations. The knowledge of colour and in particular the characterization of pigments is of utmost importance in the baroque Sicilian buildings, because the peculiarity of the colour is one of the features that makes the “Noto Valley” monuments a World Cultural Heritage site. The present works aim is to characterise and differentiate the pigments used on the façade of monuments and inside the plasters. In particular, we perform a micro-textural and analytical analysis through scanning electron microscopy (SEM) and a mineralogical investigation through the conjunction of optical microscopy and fourier transform infrared spectroscopy (FT-IR). All the experimental results have allowed us to clearly classify the pigments into earths rich in clay minerals and earth containing gypsum. Furthermore, we also show that the earths rich in clay minerals from Ragusa and Modica areas have local provenance.     

Colour contribution to children's wayfinding in school environments

The purpose of this study was to explore the contribution of colour to children's wayfinding ability in school environments and to examine the differences between colours in terms of their remembrance and usability in route learning process. The experiment was conducted with three different sample groups for each of three experiment sets differentiated by their colour arrangement. The participants totalled 100 primary school children aged seven and eight years old. The study was conducted in four phases. In the first phase, the participants were tested for familiarity with the experiment site and also for colour vision deficiencies by using Ishihara's tests for colour-blindness. In the second phase, they were escorted on the experiment route by the tester one by one, from one starting point to one end point and were asked to lead the tester to the end point by the same route. In the third phase, they were asked to describe verbally the route. In the final phase, they were asked to remember the specific colours at their correct locations. It was found that colour has a significant effect on children's wayfinding performances in school environments. However, there were no differences between different colours in terms of their remembrances in route finding tasks. In addition, the correct identifications of specific colours and landmarks were dependent on their specific locations. Contrary to the literature, gender differences were not found to be significant in the accuracy of route learning performances.     

Plants and colour: Flowers and pollination

While there is a range of colours found in plants the predominant colour is green. Pigments in plants have several roles e.g. photosynthesis and signalling. If colour is to be used as a signal then it must stand out from green. However, one should be aware that there are also coloured compounds where we have not yet fully investigated the role of colour in their functions—they may have roles in, for example, defence or heat exchange.In this paper, we will describe the basic chemistry of the major pigments found in plants and especially floral pigments. We will then discuss their locations in parts of the flower (such as sepals, petals, pollen and nectar), the cells in which they are found and their sub-cellular locations.Floral pigments have a large role to play in pollination of flowers by animals. They can and are modified in many ways during the development of flowers in nature, for example, at emergence and post-pollination. There are a range of biochemical mechanisms of colour change both within flowers and in isolated pigments. Some of the factors influencing colour are temperature, co-pigments, pH, metals, sugars, anthocyanin stacking and cell shape.There is a renewed interest in analysing floral pigments and how they are modified partly because of advances in recombinant DNA technologies, but also because of pollinators and their significance to biodiversity and for evolutionary studies. There is continued strong interest from the horticultural industry for the introduction of new colours e.g. the blue rose and for the exploitation of natural dyes. Funding in this area may impact future research in a potentially beneficial way but it must not deflect us from science-based conservation.     

Magnetic ordering of monoclinic FeNaP2O7 studied by Mössbauer spectroscopy

Several perlites of different colours originating from east Rhodope (Bulgaria) have been studied by Mössbauer spectroscopy. Several types of iron are revealed (i) paramagnetic Fe²⁺ and Fe³⁺ down 4.2K which correspond to iron dispersed into the glass matrix (ii) small aggregates of Fe²⁺ and hematite in colloidal type phase with superparamagnetic properties (iii) large aggregates and microlites of hematite and magnetite. Alteration effects and colour problem are discussed.     

Three generations of inorganic phosphates in solvent and water-borne paints: A synergism case

This research work is intended to compare the anti-corrosive properties of three generations of inorganic phosphate pigments in solvent-based paints and in water-borne ones, both of the epoxy type. The anti-corrosive properties of phosphate pigments were assessed by means of electrochemical techniques (corrosion potential measurements, polarisation tests, etc.), employing a steel electrode dipped into pigments suspensions. The behaviour of these pigments in anti-corrosive paints, formulated with different binders, have been studied by accelerated (salt spray cabinet and humidity chamber) and electrochemical tests (corrosion potential and ionic resistance measurements).Accelerated and electrochemical tests allowed to differentiate the anti-corrosive performance of the three phosphates studied in this research. These test are also able to detect and characterise possible synergism between the water-borne resin and the pigments.     

Raman identification of green and blue pigments in Etruscan polychromes on architectural terracotta panels

Micro‐Raman measurements were performed on two Etruscan polychromes on architectural terracotta panels now on display at the Villa Giulia Etruscan Museum in Rome. These painted panels, dated from 530 to 520 B .C ., are of particular interest because of the unusual presence of green and blue layers. Etruscans in the Archaic Age indeed mainly used white, red, and black colours for painted terracotta panels. Raman spectra allowed the analytical identification of green (malachite) and blue (Egyptian blue) pigments employed by Etruscans for this kind of artistic production. This finding provides evidence for a larger use of malachite and Egyptian blue, previously well documented only in Etruscan wall paintings. The use of different pigments to obtain different colour tones has been also observed. Egyptian blue is indeed mixed with malachite to obtain different green tones, and a black pigment seems to have been applied over the Egyptian blue layer to obtain a dark blue tone. Copyright © 2006 John Wiley & Sons, Ltd.     

Analysis and kinetic model of a high-pressure KrI excimer emission in a novel capacitively coupled rf lamp

We report and analyze KrI^*/I₂ ^* multi-emission spectra (160–360 nm) generated in a novel capacitively coupled 13.56 MHz rf lamp. The 13.56 MHz rf lamp, configured to avoid electrodes internal to the plasma, is used to generate a number of excimer emissions in the UV and visible spectral regions with potential biological, physical, and chemical application. We found that the total gas pressure strongly influenced the emission efficiency of KrI and I₂ excimers in the pressure range of 200 to 1200 torr. A simple kinetic model was developed to explain the observed KrI^* and I₂ ^* pressure dependence. This work provides valuable experimental information (in the high pressure regime) for obtaining accurate potential energy curves, to determine the vibrational distribution in the emitting states for KrI. PACS 52.80.Pi; 32.30.JC; 52.80.Yr; 42.72.Bj     

A study on red lead degradation in a medieval manuscript Lorvão Apocalypse (1189)

The mechanisms of red lead degradation were studied in a medieval Portuguese codex, Lorvão Apocalypse (1189), by Raman microscopy (µ‐Raman) and micro‐X‐ray diffraction (µ‐XRD). The range of pigments found for the illuminations is mainly limited to vermilion, orpiment and red lead. Micro‐Fourier transform infrared spectroscopy (µ‐FTIR) determined that the pigments were applied in a proteinaceous binding medium. In the red and orange colours, arsenic (As) was determined, by micro‐energy dispersive X‐ray fluorescence (µ‐EDXRF), to be ranging 1–4% (wt %). For those colours, lead white and calcium carbonate were found as fillers whereas orpiment was applied as a pure pigment. Raman microscopy identified, unequivocally, the degradation product of red lead as galena [lead (II) sulphide, PbS]. To determine the main factors affecting red lead degradation, a set of accelerating ageing experiments was designed to assess the influence of extenders and of the two other pigments, vermilion and orpiment. The experiments were followed by µ‐Raman, µ‐EDXRF and XRD. Raman microscopy results for the simulation of degradation of red lead, in the presence of orpiment, are in agreement to what was found in the Lorvão Apocalypse, galena being the main degradation product; also in common is a Raman band at ca. 810 cm⁻¹, which was attributed to a lead arsenate compound. It was concluded that in Lorvão Apocalypse, the degradation of red lead was a result of its reaction with orpiment. Copyright © 2009 John Wiley & Sons, Ltd.     

RGB method in immunofluorescence investigations on stem cells

Colour is not related to a particular discipline, but it is transversely present in many circles and in almost all the aspects of life. It has a special value in art, but also as far as other disciplines are concerned, like the sciences, the colour is at the basis of some of their intrinsic significances and it often needed to allow the interpretation of some of their phenomena as well. As regards the development of cell biology knowledge, colour acquired more and more importance in revealing the observations of the researchers. A field in which the methods based on the colours are particularly employed is the immunofluorescence, used to identify specific proteins in cells and tissues. These techniques combine the fluorochrome properties with specific molecules, i.e. antibodies, directed against particular substances to investigate, for example a specific protein. In single immunofluorescence analysis, the signal from an excited fluorochrome corresponds to a particular protein. In multiple immunofluorescence analysis, two or more signals are simultaneously detected to show the localization of different proteins on the same sample. The three primary colours red, green and blue were currently assigned to the signals from immunofluorescence-processed samples and visualized by the RGB method. In the present work, different examples of RGB applications in immunocytochemical investigations are showed: the first concerns the multiple analysis of three markers, localized in different loci of the cell plasma membrane; the second is related to the co-localization of two signals in the same site of specific subcellular structures. In this case the secondary colours, obtained by overlapping the primary ones, demonstrate the specific co-presence of two proteins in the same site. With the present paper, the authors wish to underline the relevant role of colours also in those areas in which colours are the means not the end.     

Technical aspects of dielectric spectroscopy measurements of liquid crystals

The dielectric spectroscopy measurements were performed for antiferroelectric liquid crystalline mixture. For this purpose, the cells with ITO electrodes were prepared. It was found that it is not possible to detect some important relaxation modes in Sm A^*, Sm C^*, and Sm CA^* phases. The own cell mode (related to cell properties, i.e., capacity and resistivity) covers the dielectric response of liquid crystalline medium. Dielectric measurements in cells with gold electrodes were done to show all possible relaxations in antiferroelectric liquid crystals (LCs).     

Micro‐Raman spectroscopy of pigments contained in different calcium carbonate polymorphs from freshwater cultured pearls

The metastable calcium carbonate polymorph vaterite has recently been found to occur commonly in freshwater cultured pearls from Japan and China. Organic pigment molecules in these vaterite regions of freshwater cultured pearls were analysed by resonance and near‐resonance micro‐Raman spectroscopy, in single spectra and in mapping modes and are compared with their aragonitic counterparts. Four different excitation wavelengths (487.9, 514.5, 532.2 and 632.8 nm) were used, resulting in differential increase of resolution for the pigments. Although vaterite areas were always lightly coloured (light yellow, light brown or white), ten different pigments were identified and a single colour is formed by a combination of three and up to nine polyenes of different lengths. The molecules were identified as unmethylated polyenes with effective chain lengths between 8 and 12 conjugated double bonds and FWHMs of 10 ± 2 cm⁻¹. Additionally, and for the first time in pearls, methylated polyenes were detected together with unmethylated pigments in aragonite. Polyenes with chain lengths shorter than 8 or longer than 12 were not found in vaterite, whereas both shorter and longer pigment chains were observed in aragonite from the same pearls. Pigments have lower concentrations in vaterite and are distributed more homogeneously, while they have higher concentrations in aragonite and are arranged along the annual growth lines of the pearls. Copyright © 2008 John Wiley & Sons, Ltd.     

Density correlation function and dynamic transient exponents for liquid helium at and aboveT λ

The critical dynamics of liquid helium are studied by means of renormalized field theory on the basis of the symmetric planar-spin model of Halperin, Hohenberg, and Siggia. The stability problem of the dynamic fixed point is discussed in detail. Two-loop results suggest, but do not establish, the stability of the dynamic scaling fixed point. The previously found small fixed point valuew ^*~O(0.15) is tentatively confirmed which implies a small ratio of relaxation rates of the order parameter and the entropy. The ensuing dynamic transient exponents are calculated. The density correlation function is determined toO(ε=4?d) at and aboveT _λ. Its properties in the casew ^*?1 provide quantitative support for the recently proposed explanation of the discrepancy between theory and light scattering experiments. A small value ofw ^* implies pronounced peaks of the frequency spectrum at finite frequencies at and aboveT _λ. It also suppresses the temperature dependence of finite-frequency properties over an enlarged critical region as found in light scattering measurements. The quantitative relation between the value ofw ^*>0 and observable properties of the frequency spectrum is computed.     

Colour image enhancement by white light spatial filtering

Colour enhancement of transparencies with degraded colours is obtained by attenuation of the zero order component of the white light spatial spectrum. The filtering is performed in two ways, directly and sequentially, and the efficiency of the enhancement is estimated through the measurement of the colour difference for several pairs of colours of the object. The method is described in detail and some colour results are presented.     

Experimental study of de Vries properties in antiferroelectric smectic liquid crystals

Results of the experimental study on different antiferroelectric liquid crystal (AFLC) materials are presented using a number of techniques such as the optical birefringence, electro-optics and the measurements of optical thickness of free-standing films. Despite differences in the molecular structures of the various AFLC materials studied, these are found to exhibit a de Vries type of smecticA^* (SmA ^*) properties in a temperature range higher than SmC ^* . This correlation leads to the conclusion that these two classes of liquid crystals are related to each other. Furthermore, we suggest that these arise from the same physical mechanism, namely the existence of the weak synclinic (or reduced anticlinic) correlations between the neighbouring molecular tilt directions.     

Surface characteristics of coated soft- and hardwoods due to UV-B ageing

Wood is a valuable building material, but it is susceptible to degradation if left unprotected especially when using less durable species. Protection is commonly achieved by applying a suitable finish that should exhibit sufficient penetration, good adhesion and resistance to photo-degradation and weathering. The performance of wood coatings is largely influenced by the adhesion between the coating and substrate and any degradation of the substrate will also affect the coating. The aim of this study was to determine the degree to which the substrate degrades despite the coating and adds to the ageing of the coating from the interface. This effect can be expected to differ for soft- and hardwoods. Coated wood samples from pine and meranti wood - a soft- and hardwood - were irradiated with UV-B light to detect surface changes at various length scales and to assess the impact of the underlying wood substrate on the ageing performance of a commercially available acrylic coating. Surface modifications were determined with atomic force microscopy, Fourier transform infrared spectroscopy, colour spectroscopy, static contact angle and a surface roughness profiler.     

色偏振的理论及应用

本文就色偏振的理论作了详尽的分析。重点分析振幅Ａ１、Ａ２与角φ的关系，区别单色的干涉光与非干涉的白色背景光，得出在色偏振中光强、色纯度、互补色、变色位置和色调变化的规律。同时也对某些应用作了探讨。