Correlating axial and equatorial ligand field effects to the single-molecule magnet performances of a family of dysprosium bis-methanediide complexes

Treatment of the new methanediide–methanide complex [Dy(SCS)(SCSH)(THF)] (1Dy, SCS = {C(PPh₂S)₂}²⁻) with alkali metal alkyls and auxillary ethers produces the bis-methanediide complexes [Dy(SCS)₂][Dy(SCS)₂(K(DME)₂)₂] (2Dy), [Dy(SCS)₂][Na(DME)₃] (3Dy) and [Dy(SCS)₂][K(2,2,2-cryptand)] (4Dy). For further comparisons, the bis-methanediide complex [Dy(NCN)₂][K(DB18C6)(THF)(toluene)] (5Dy, NCN = {C(PPh₂NSiMe₃)₂}²⁻, DB18C6 = dibenzo-18-crown-6 ether) was prepared. Magnetic susceptibility experiments reveal slow relaxation of the magnetisation for 2Dy–5Dy, with open magnetic hysteresis up to 14, 12, 15, and 12 K, respectively (∼14 Oe s⁻¹). Fitting the alternating current magnetic susceptibility data for 2Dy–5Dy gives energy barriers to magnetic relaxation (U_eff) of 1069(129)/1160(21), 1015(32), 1109(70), and 757(39) K, respectively, thus 2Dy–4Dy join a privileged group of SMMs with U_eff values of ∼1000 K and greater with magnetic hysteresis at temperatures >10 K. These structurally similar Dy-components permit systematic correlation of the effects of axial and equatorial ligand fields on single-molecule magnet performance. For 2Dy–4Dy, the Dy-components can be grouped into 2Dy–cation/4Dy and 2Dy–anion/3Dy, where the former have almost linear C Dy C units with short average Dy C distances, and the latter have more bent C Dy C units with longer average Dy C bonds. Both U_eff and hysteresis temperature are superior for the former pair compared to the latter pair as predicted, supporting the hypothesis that a more linear axial ligand field with shorter M–L distances produces enhanced SMM properties. Comparison with 5Dy demonstrates unusually clear-cut examples of: (i) weakening the equatorial ligand field results in enhancement of the SMM performance of a monometallic system; (ii) a positive correlation between U_eff barrier and axial linearity in structurally comparable systems.

Studies on equatorial donor and C Dy C angle variation effects on energy barriers to the slow relaxation of magnetisation are reported.     

A visible-light activated [2 + 2] cycloaddition reaction enables pinpointing carbon–carbon double bonds in lipids

The precise location of C C bonds in bioactive molecules is critical for a deep understanding of the relationship between their structures and biological roles. However, the traditional ultraviolet light-based approaches exhibited great limitations. Here, we discovered a new type of visible-light activated [2 + 2] cycloaddition of carbonyl with C C bonds. We found that carbonyl in anthraquinone showed great reactivities towards C C bonds in lipids to form oxetanes under the irradiation of visible-light. Combined with tandem mass spectrometry, this site-specific dissociation of oxetane enabled precisely locating the C C bonds in various kinds of monounsaturated and polyunsaturated lipids. The proof-of-concept applicability of this new type of [2 + 2] photocycloaddition was validated in the global identification of unsaturated lipids in a complex human serum sample. 86 monounsaturated and polyunsaturated lipids were identified with definitive positions of C C bonds, including phospholipids and fatty acids even with up to 6 C C bonds. This study provides new insights into both the photocycloaddition reactions and the structural lipidomics.

A new visible-light activated [2 + 2] cycloaddition reaction was discovered and enabled pinpointing carbon–carbon double bonds in lipids.     

Synthesis of azahelicenes through Mallory reaction of imine precursors: corannulene substrates provide an exception to the rule in oxidative photocyclizations of diarylethenes

Typically, the synthesis of phenanthrene-based polycyclic aromatic hydrocarbons relies on the Mallory reaction. In this approach, stilbene (PhCH CHPh)-based precursors undergo an oxidative photocyclization reaction to join the two adjacent aromatic rings into an extended aromatic structure. However, if one C C carbon atom is replaced by a nitrogen atom (C N), the synthesis becomes practically infeasible. Here, we show the very first examples of a successful Mallory reaction on stilbene-like imine precursors involving the molecularly curved corannulene nucleus. The isolated yields exceed 90% and the resulting single and double aza[4]helicenes exhibit adjustable high affinity for electrons.

First azahelicene synthesis from corannulene-based imine precursors is presented.     

An integrated electrocatalytic nESI-MS platform for quantification of fatty acid isomers directly from untreated biofluids

Positional isomers of alkenes are frequently transparent to the mass spectrometer and it is difficult to provide convincing data to support their presence. This work focuses on the development of a new reactive nano-electrospray ionization (nESI) platform that utilizes non-inert metal electrodes (e.g., Ir and Ru) for rapid detection of fatty acids by mass spectrometry (MS), with concomitant localization of the C C bond to differentiate fatty acid isomers. During the electrospray process, the electrical energy (direct current voltage) is harnessed for in situ oxide formation on the electrode surface via electro-oxidation. The as-formed surface oxides are found to facilitate in situ epoxide formation at the C C bond position and the products are analyzed by MS in real-time. This phenomenon has been applied to analyze isomers of unsaturated fatty acids from complex serum samples, without pre-treatment.

An electrocatalytic nESI MS platform enables positional isomer differentiation through the localization of C C bonds in fatty acids present in complex biofluids.     

Nucleophilic reactivity of the gold atom in a diarylborylgold(i) complex toward polar multiple bonds

A di(o-tolyl)borylgold complex was synthesized via the metathesis reaction of a gold alkoxide with tetra(o-tolyl)diborane(4). The resulting diarylborylgold complex exhibited a Lewis acidic boron center and a characteristic visible absorption that arises from its HOMO–LUMO excitation, which is narrower than that of a previously reported dioxyborylgold complex. The diarylborylgold complex reacted with isocyanide in a stepwise fashion to afford single- and double-insertion products and a C–C coupled product. Reactions of this diarylborylgold complex with C O/N double bond species furnished addition products under concomitant formation of Au–C and B–O/N bonds, which suggests nucleophilic reactivity of the gold metal center. DFT calculations provided details of the underlying reaction mechanism, which involves an initial coordination of the C O/N bond to the boron vacant p-orbital of the diarylboryl ligand followed by a migration of the gold atom from the tetracoordinate sp³-hybridized boron center, which is analogous to the reactivity of the conventional sp³-hybridized borate species. The DFT calculations also suggested a stepwise mechanism for the reaction of this diarylborylgold complex with isocyanide, which afforded three different reaction products depending on the applied reaction conditions.

A di(o-tolyl)borylgold complex added to C O/N double bond to form Au–C and B–O/N bonds. DFT calculations revealed a two-step mechanism consisting of the coordination of O/N atom to B atom followed by nucleophilic migration of Au atom.     

“Broken-hearted” carbon bowl via electron shuttle reaction: energetics and electron coupling

Unprecedented one-step C C bond cleavage leading to opening of the buckybowl (π-bowl), that could provide access to carbon-rich structures with previously inaccessible topologies, is reported; highlighting the possibility to implement drastically different synthetic routes to π-bowls in contrast to conventional ones applied for polycyclic aromatic hydrocarbons. Through theoretical modeling, we evaluated the mechanistic pathways feasible for π-bowl planarization and factors that could affect such a transformation including strain and released energies. Through employment of Marcus theory, optical spectroscopy, and crystallographic analysis, we estimated the possibility of charge transfer and electron coupling between “open” corannulene and a strong electron acceptor such as 7,7,8,8-tetracyanoquinodimethane. Alternative to a one-pot solid-state corannulene “unzipping” route, we reported a nine-step solution-based approach for preparation of novel planar “open” corannulene-based derivatives in which electronic structures and photophysical profiles were estimated through the energies and isosurfaces of the frontier natural transition orbitals.

An electron shuttle contributed to breaking corannulene''s heart through a unique one-step reductive C C bond cleavage in the traditionally robust π-bowl. The heartbreak did not stop there as “broken analogs” were developed through a solution-phase route.     

Quantification and molecular imaging of fatty acid isomers from complex biological samples by mass spectrometry

Elucidating the isomeric structure of free fatty acids (FAs) in biological samples is essential to comprehend their biological functions in various physiological and pathological processes. Herein, we report a novel approach of using peracetic acid (PAA) induced epoxidation coupled with mass spectrometry (MS) for localization of the C C bond in unsaturated FAs, which enables both quantification and spatial visualization of FA isomers from biological samples. Abundant diagnostic fragment ions indicative of the C C positions were produced upon fragmentation of the FA epoxides derived from either in-solution or on-tissue PAA epoxidation of free FAs. The performance of the proposed approach was evaluated by analysis of FAs in human cell lines as well as mapping the FA isomers from cancer tissue samples with MALDI-TOF/TOF-MS. Merits of the newly developed method include high sensitivity, simplicity, high reaction efficiency, and capability of spatial characterization of FA isomers in tissue samples.

A structural lipidomics approach employs peracetic acid-induced epoxidation coupled with mass spectrometry for pinpointing C C bonds in unsaturated fatty acids, enabling both quantification and imaging of FA isomers from biological samples.     

Intramolecular Csp3–H/C–C bond amination of alkyl azides for the selective synthesis of cyclic imines and tertiary amines

The intramolecular Csp³–H and/or C–C bond amination is very important in modern organic synthesis due to its efficiency in the construction of diversified N-heterocycles. Herein, we report a novel intramolecular cyclization of alkyl azides for the synthesis of cyclic imines and tertiary amines through selective Csp³–H and/or C–C bond cleavage. Two C–N single bonds or a C N double bond are efficiently constructed in these transformations. The carbocation mechanism differs from the reported metal nitrene intermediates and therefore enables metal-free and new transformation.

A novel intramolecular cyclization of alkyl azides for the synthesis of cyclic imines and tertiary amines has been developed. The aliphatic C–H or C–C bond was selectively cleaved with the efficient formation of two C–N single bonds or a C N double bond.     

Catalytic enantioselective allene–anhydride approach to β,γ-unsaturated enones bearing an α-all-carbon-quarternary center

A protocol of highly regio- and enantioselective copper-catalyzed hydroacylation of the non-terminal C C bond in 1,1-disubstituted terminal allenes with anhydrides has been developed. Both aromatic and aliphatic carboxylic anhydrides are applicable to the efficient construction of all carbon quarternary centers connected with a versatile C C bond and a useful ketone functionality. The synthetic potentials of the enantioenriched products have also been demonstrated. Density functional theory (DFT) calculations were performed to explain the steric outcome of the products: the hydroacylation proceeds through a six-membered transition state and the ligand-substrate steric interactions account for the observed enantioselectivity although the chiral ligand is far away from the to-be-genetated chiral center.

A protocol of highly regio- and enantioselective copper-catalyzed hydroacylation of the non-terminal C C bond in 1,1-disubstituted terminal allenes with anhydrides has been developed.     

Highly ordered macroporous dual-element-doped carbon from metal–organic frameworks for catalyzing oxygen reduction

Multiple heteroatom-doped carbons with 3D ordered macro/meso-microporous structures have not been realized by simple carbonization of metal–organic frameworks (MOFs). Herein, ordered macroporous phosphorus- and nitrogen-doped carbon (M-PNC) is prepared successfully by carbonization of double-solvent-induced MOF/polystyrene sphere (PS) precursors accompanied with spontaneous removal of the PS template, followed by post-doping. M-PNC shows a high specific surface area of 837 m² g⁻¹, nitrogen doping of 3.17 at%, and phosphorus doping of 1.12 at%. Thanks to the hierarchical structure, high specific surface area, and multiple heteroatom-doping, M-PNC exhibits unusual catalytic activity as an electrocatalyst for the oxygen reduction reaction. Computational calculation reveals that the P O group helps stabilize the adsorption of intermediates, and the position of P O relative to graphitic N significantly improves the activity of the adjacent carbons for electrocatalysis.

Multiple heteroatoms-doped carbon with 3D ordered macroporous structures, which showing outstanding catalytic activity for oxygen reduction, was prepared by carbonization of double-solvent-induced MOF/polystyrene sphere accompanied with post-doping.     

Chemo-bio catalysis using carbon supports: application in H2-driven cofactor recycling

Heterogeneous biocatalytic hydrogenation is an attractive strategy for clean, enantioselective C X reduction. This approach relies on enzymes powered by H₂-driven NADH recycling. Commercially available carbon-supported metal (metal/C) catalysts are investigated here for direct H₂-driven NAD⁺ reduction. Selected metal/C catalysts are then used for H₂ oxidation with electrons transferred via the conductive carbon support material to an adsorbed enzyme for NAD⁺ reduction. These chemo-bio catalysts show improved activity and selectivity for generating bioactive NADH under ambient reaction conditions compared to metal/C catalysts. The metal/C catalysts and carbon support materials (all activated carbon or carbon black) are characterised to probe which properties potentially influence catalyst activity. The optimised chemo-bio catalysts are then used to supply NADH to an alcohol dehydrogenase for enantioselective (>99% ee) ketone reductions, leading to high cofactor turnover numbers and Pd and NAD⁺ reductase activities of 441 h⁻¹ and 2347 h⁻¹, respectively. This method demonstrates a new way of combining chemo- and biocatalysis on carbon supports, highlighted here for selective hydrogenation reactions.

Heterogeneous chemo-bio catalytic hydrogenation is an attractive strategy for clean, enantioselective C X reduction.     

Redox deracemization of β,γ-alkynyl α-amino esters

The first non-enzymatic redox deracemization method using molecular oxygen as the terminal oxidant has been described. The one-pot deracemization of β,γ-alkynyl α-amino esters consisted of a copper-catalyzed aerobic oxidation and chiral phosphoric acid-catalyzed asymmetric transfer hydrogenation with excellent functional group compatibility. By using benzothiazoline as the reducing reagent, an exclusive chemoselectivity at the C N bond over the C C bond was achieved, allowing for efficient deracemization of a series of α-amino esters bearing diverse α-alkynyl substituent patterns. The origins of chemo- and enantio-selectivities were elucidated by experimental and computational mechanistic investigation. The generality of the strategy is further demonstrated by efficient deracemization of β,γ-alkenyl α-amino esters.

A one-pot deracemization of β,γ-alkynyl α-amino esters consisting of an aerobic oxidation and chiral phosphoric acid-catalyzed asymmetric transfer hydrogenation has been described.     

One tool to bring them all: Au-catalyzed synthesis of B,O- and B,N-doped PAHs from boronic and borinic acids

The isoelectronic replacement of C C bonds with ⁻B N⁺ bonds in polycyclic aromatic hydrocarbons (PAHs) is a widely used tool to prepare novel optoelectronic materials. Far less well explored are corresponding B,O-doped PAHs, although they have a similarly high application potential. We herein report on the modular synthesis of B,N- and B,O-doped PAHs through the [Au(PPh₃)NTf₂]-catalyzed 6-endo-dig cyclization of BN–H and BO–H bonds across suitably positioned C C bonds in the key step. Readily available, easy-to-handle o-alkynylaryl boronic and borinic acids serve as starting materials, which are either cyclized directly or first converted into the corresponding aminoboranes and then cyclized. The reaction even tolerates bulky mesityl substituents on boron, which later kinetically protect the formed B,N/O-PAHs from hydrolysis or oxidation. Our approach is also applicable for the synthesis of rare doubly B,N/O-doped PAHs. Specifically, we prepared 1,2-B,E-naphthalenes and -anthracenes, 1,5-B₂-2,6-E₂-anthracenes (E = N, O) as well as B,O₂-containing and unprecedented B,N,O-containing phenalenyls. Selected examples of these compounds have been structurally characterized by X-ray crystallography; their optoelectronic properties have been studied by cyclic voltammetry, electron spectroscopy, and quantum-chemical calculations. Using a new unsubstituted (B,O)₂-perylene as the substrate for late-stage functionalization, we finally show that the introduction of two pinacolatoboryl (Bpin) substituents is possible in high yield and with perfect regioselectivity via an Ir-catalyzed C–H borylation approach.

Singly and doubly B,E-doped PAHs were synthesized using a protocol that starts from easy-to-handle boronic and borinic acids and offers the possibility to choose between the preparation of B,O- and B,N-PAHs in the final reaction step.     

Coordinative-to-covalent transformation,isomerization dynamics,and logic gate application of dithienylethene based photochromic cages

Photochromic coordinative cages containing dynamic C N imine bonds are assembled from a dithienylethene-based aldehyde and tris-amine precursors via metallo-component self-assembly. The resulting metal-templated cages are then reduced and demetalated into pure covalent-organic cages (COCs), which are otherwise difficult to prepare via de novo organic synthesis. Both the obtained coordinative and covalent cages can be readily interconverted between the ring-open (o-isomer) and one-lateral ring-closed (c-isomer) forms by UV/vis light irradiation, demonstrating distinct absorption, luminescence and photoisomerization dynamics. Specifically, the ring-closed c-COCs show a blue-shifted absorption band compared with analogous metal-templated cages, which can be applied in photoluminescence (PL) color-tuning of upconversion materials in different ways, showing potential for constructing multi-readout logic gate systems.

Metal-templated component self-assembly and then demetalation affords photochromic covalent organic cages applicable for upconversion PL-color tuning for logic gates.     

Unexpected formation of 1,2- and 1,4-bismethoxyl Sc3N@Ih-C80 derivatives via regioselective anion addition: an unambiguous structural identification and mechanism study

An attempt to achieve heterocyclic cycloadducts of Sc₃N@I_h-C₈₀via reaction with Ph₂C O, PhC CPh or PhC N in the presence of tetrabutylammonium hydroxide (TBAOH) stored in CH₃OH led to the formation of the unexpected bismethoxyl adducts of Sc₃N@I_h-C₈₀ (1 and 2). Further studies reveal that TBAOH in CH₃OH can boost the CH₃O⁻ addition efficiently, regardless of the presence of other reagents. Single-crystal X-ray diffraction results firmly assign the molecular structures of 1 and 2 as respective 1,4- and 1,2-bismethoxyl adducts, and reveal unusual relationships between the internal Sc₃N cluster and the addition modes, in addition to the unusual packing mode in view of the orientation of the methoxyl groups. Electrochemical results demonstrate smaller electrochemical gaps for 1 and 2, relative to that of Sc₃N@I_h-C₈₀, confirming their better electroactive properties. Finally, a plausible reaction mechanism involving anion addition and a radical reaction was proposed, presenting new insights into the highly selective reactions between the methoxyl anion and metallofullerenes. 1 and 2 represent the first examples of methoxyl derivatives of metallofullerenes. This work not only presents a novel and facile strategy for the controllable synthesis of alkoxylated metallofullerene derivatives, but also provides new non-cycloadducts for the potential applications of EMFs.

An attempt to achieve heterocyclic cycloadducts of Sc₃N@I_h-C₈₀via reaction with Ph₂C O, PhC CPh or PhC N in the presence of tetrabutylammonium hydroxide (TBAOH) stored in CH₃OH led to the formation of the unexpected bismethoxyl adducts of Sc₃N@I_h-C₈₀ (1 and 2).     

Electrochemical C–N coupling with perovskite hybrids toward efficient urea synthesis

Electrocatalytic C–N coupling reaction by co-activation of both N₂ and CO₂ molecules under ambient conditions to synthesize valuable urea opens a new avenue for sustainable development, while the actual catalytic activity is limited by poor adsorption and coupling capability of gas molecules on the catalyst surface. Herein, theoretical calculation predicts that the well-developed built-in electric field in perovskite hetero-structured BiFeO₃/BiVO₄ hybrids can accelerate the local charge redistribution and thus promote the targeted adsorption and activation of inert N₂ and CO₂ molecules on the generated local electrophilic and nucleophilic regions. Thus, a BiFeO₃/BiVO₄ heterojunction is designed and synthesized, which delivers a urea yield rate of 4.94 mmol h⁻¹ g⁻¹ with a faradaic efficiency of 17.18% at −0.4 V vs. RHE in 0.1 M KHCO₃, outperforming the highest values reported as far. The comprehensive analysis further confirms that the local charge redistribution in the heterojunction effectively suppresses CO poisoning and the formation of the endothermic *NNH intermediate, which thus guarantees the exothermic coupling of *N N* intermediates with the generated CO via C–N coupling reactions to form the urea precursor *NCON* intermediate. This work opens a new avenue for effective electrocatalytic C–N coupling under ambient conditions.

The local charge redistribution in BiFeO₃/BiVO₄ hybrids promotes the targeted adsorption and activation of inert gas molecules and guarantees the exothermic coupling of *N N* with generated CO via C–N coupling reactions to form *NCON* precursor.     

Copper(ii) ketimides in sp3 C–H amination

Commercially available benzophenone imine (HN CPh₂) reacts with β-diketiminato copper(ii) tert-butoxide complexes [Cu^II]–O^tBu to form isolable copper(ii) ketimides [Cu^II]–N CPh₂. Structural characterization of the three coordinate copper(ii) ketimide [Me₃NN]Cu–N CPh₂ reveals a short Cu-N_ketimide distance (1.700(2) Å) with a nearly linear Cu–N–C linkage (178.9(2)°). Copper(ii) ketimides [Cu^II]–N CPh₂ readily capture alkyl radicals R˙ (PhCH(˙)Me and Cy˙) to form the corresponding R–N CPh₂ products in a process that competes with N–N coupling of copper(ii) ketimides [Cu^II]–N CPh₂ to form the azine Ph₂C N–N CPh₂. Copper(ii) ketimides [Cu^II]–N CAr₂ serve as intermediates in catalytic sp³ C–H amination of substrates R–H with ketimines HN CAr₂ and ^tBuOO^tBu as oxidant to form N-alkyl ketimines R–N CAr₂. This protocol enables the use of unactivated sp³ C–H bonds to give R–N CAr₂ products easily converted to primary amines R–NH₂via simple acidic deprotection.

Commercially available benzophenone imine (HN CPh₂) reacts with β-diketiminato copper(ii) tert-butoxide complexes [Cu^II]–O^tBu to form isolable copper(ii) ketimides [Cu^II]–N CPh₂ that serve as intermediates in catalytic sp³ C−H amination via radical relay.     

Tandem catalyzing the hydrodeoxygenation of 5-hydroxymethylfurfural over a Ni3Fe intermetallic supported Pt single-atom site catalyst

Single-atom site catalysts (SACs) have been used in multitudinous reactions delivering ultrahigh atom utilization and enhanced performance, but it is challenging for one single atom site to catalyze an intricate tandem reaction needing different reactive sites. Herein, we report a robust SAC with dual reactive sites of isolated Pt single atoms and the Ni₃Fe intermetallic support (Pt₁/Ni₃Fe IMC) for tandem catalyzing the hydrodeoxygenation of 5-hydroxymethylfurfural (5-HMF). It delivers a high catalytic performance with 99.0% 5-HMF conversion in 30 min and a 2, 5-dimethylfuran (DMF) yield of 98.1% in 90 min at a low reaction temperature of 160 °C, as well as good recyclability. These results place Pt₁/Ni₃Fe IMC among the most active catalysts for the 5-HMF hydrodeoxygenation reaction reported to date. Rational control experiments and first-principles calculations confirm that Pt₁/Ni₃Fe IMC can readily facilitate the hydrodeoxygenation reaction by a tandem mechanism, where the single Pt site accounts for C O group hydrogenation and the Ni₃Fe interface promotes the C–OH bond cleavage. This interfacial tandem catalysis over the Pt single-atom site and Ni₃Fe IMC support may develop new opportunities for the rational structural design of SACs applied in other heterogeneous tandem reactions.

A robust Pt₁/Ni₃Fe single-atom site catalyst was designed for the tandem catalysis of 5-hydroxymethylfurfural hydrodeoxygenation to DMF, where Pt atoms catalyze the C O group hydrogenation and Ni₃Fe interface accounts for the C–OH bond rupture.     

Tri-insertion with dearomatization of terminal arylalkynes using a carborane based frustrated Lewis pair template

Intramolecular vicinal Frustrated Lewis Pairs (FLPs) have played a significant role in the activation of small molecules, and their stabilities and reactivities are found to strongly depend on the nature of the bridging units. This work reports a new carborane based FLP, 1-PPh₂-2-BPh₂-1,2-C₂B₁₀H₁₀ (2), which reacts with an equimolar amount of p-R₂NC₆H₄C CH (R = Me, Et, Ph) at room temperature to give C C triple bond addition products 1,2-[PPh₂C(R₂NC₆H₄) CHBPh₂]-1,2-C₂B₁₀H₁₀ (3) in high yields. Compounds 3 react further with two equiv. of p-R₂NC₆H₄C CH (R = Me, Et) at 60–70 °C to give unprecedented stereoselective tri-insertion products, 3,3a,6,6a-tetrahydronaphtho[1,8a-b]borole tricycles (4), in which one of the aryl rings from arylacetylene moieties has been dearomatized with the formation of four stereocenters including one quaternary carbon center. It is noted that the phosphine unit functions as a catalyst during the reactions. After trapping and structural characterization of a key intermediate, a reaction mechanism is proposed, involving sequential alkyne insertion and 1,2-boryl migration.

A carborane based frustrated Lewis pair enables tri-insertion with dearomatization of arylalkynes, forming unprecedented products, borole tricycles, with the construction of four stereocenters including one quaternary carbon center in one process.     

Synthesis,solution dynamics and chemical vapour deposition of heteroleptic zinc complexes via ethyl and amide zinc thioureides

Ethyl and amide zinc thioureides [L¹ZnEt]₂ (1), [L¹*ZnEt]₂ (2) and [L¹Zn(N(SiMe₃)₂)]₂ (3) have been synthesised from the equimolar reaction of thiourea ligands (HL¹ = ⁱPrN(H)CSNMe₂ and HL¹* = PhN(H)CSNMe₂) with diethyl zinc and zinc bis[bis(trimethylsilyl)amide] respectively. New routes towards heteroleptic complexes have been investigated through reactions of 1, 2 and 3 with β-ketoiminates (HL² = [(Me)CN(H){ⁱPr}–CHC(Me) O]), bulky aryl substituted β-diiminates (HL³ = [(Me)CN(H){Dipp}–CHC(Me) N{Dipp}] (Dipp = diisopropylphenyl) and HL³* = [(Me)CN(H){Dep}–CHC(Me) N{Dep}] (Dep = diethylphenyl)) and donor-functionalised alcohols (HL⁴ = Et₂N(CH₂)₃OH and HL⁴* = Me₂N(CH₂)₃OH) and have led to the formation of the heteroleptic complexes [L¹*ZnL³*] (5), [L¹ZnL⁴]₂ (6), [L¹ZnL⁴*]₂ (7), [L¹*ZnL⁴] (8) and [L¹*ZnL⁴*] (9). All complexes have been characterised by ¹H and ¹³C NMR, elemental analysis, and the X-ray structures of HL¹*, 1, 2, 6 and 7 have been determined via single crystal X-ray diffraction. Variable temperature ¹H, COSY and NOESY NMR experiments investigating the dynamic behaviour of 5, 6 and 7 have shown these molecules to be fluxional. On the basis of solution state fluxionality and thermogravimetric analysis (TGA), alkoxyzinc thioureides 6 and 7 were investigated as single-source precursors for the deposition of the ternary material zinc oxysulfide, Zn(O,S), a buffer layer used in thin film photovoltaic devices. The aerosol-assisted chemical vapour deposition (AACVD) reaction of 7 at 400 °C led to the deposition of the heterodichalcogenide material Zn(O,S), which was confirmed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray analysis (EDX), with optical properties investigated using UV/vis spectroscopy, and surface morphology and film thickness examined using scanning electron microscopy (SEM).

This work investigates the synthesis and solution dynamics of heteroleptic alkoxyzinc thioureides for the chemical vapour deposition of the heterochalcogenide material Zn(O,S).