Surface modification of ultra high molecular weight polyethylene fibers via the sequential photoinduced graft polymerization

In this study, a sequential photoinduced graft polymerization process was proposed to improve the poor interfacial bonding property of ultra high molecular weight polyethylene (UHMWPE) fibers. The polymerization was initiated by dormant semipinacol (SP) groups and carried out in a thin liquid layer. Methacrylic acid (MAA) and acryl amide (AM) were grafted stepwise onto the surface of UHMWPE fibers. Attenuated total reflectance infrared spectroscopy (ATR-IR) and thermo gravimetric analysis (TGA) confirmed the grafting. The analysis result of pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) indicated the structure of grafted chains. Scanning electron microscopy (SEM) images and atomic force microscopy (AFM) images revealed the apparent morphology changing, and the grafted layers were observed. Interfacial shear stress (IFSS) test of the modified fibers showed an extensively improved interfacial bonding property. The active groups grafted onto the fibers would supply enough anchor points for the chemical bonding with various resins or further reactions.     

Studies on surface modification of UHMWPE fibers via UV initiated grafting

In this research, the surface of ultra high molecular weight polyethylene (UHMWPE) fiber was modified by high energy ultraviolet (UV) initiated grafting reactions and acrylamide groups were grafted onto UHMWPE chains. The initiating and grafting mechanism of the reactions was studied. Some important factors influencing the grafting effect, e.g. crystallinity of UHMWPE fiber, concentration of the initiating reagent, grafting time and the concentration of grafting monomer (acrylamide) were discussed. Fourier transform infrared (FTIR) was used to manifest the mechanism of the grafting reaction. Scanning electron microscopy (SEM) was used to show the morphology changing of the fiber surface. Single fiber pull-out strength and ILSS tests of the composite showed that acrylamide grafted onto the surface of the fiber could improve the interfacial adhesion between treated fibers and matrices.     

A Study of the Synthesis of EPDM-g-MAN and Toughness of its Blend with SAN (AEMS)

Ethylene–propylene–diene–methyl methacrylate/acrylonitrile terpolymers (EPDM-g-MAN) were synthesized by comonomers methyl methacrylate and acrylonitrile (MMA-AN) grafted on EPDM macromolecules with solution graft copolymerization. The engineering plastics of the blend of EPDM-g-MAN with SAN (AEMS) were prepared by blending EPDM-g-MAN with SAN resin. The effect of AN/MMA-AN weight percentage (f _AN) on monomer conversion ratio, grafting ratio, and grafting efficiency of the graft copolymerization and the notched Izod impact strength of AEMS were investigated. The notched Izod impact strength of AEMS, prepared by blending SAN with EPDM-g-MAN, was synthesized under our optimum S2 reaction conditions, with EPDM/MMA-AN weight proportion of 50/50 and f _AN of 10 wt%, presenting a peak with the maximum value of 61.0 kJ/m². The microstructure of AEMS prepared with S2 reaction conditions showed that when the polarity of EPDM-g-MAN was appropriate, the EPDM phase formed a pseudocontinuous phase in the SAN matrix and the interfacial adhesion was strong, which could induce shear yielding of the SAN matrix. Differential scanning calorimetry analysis showed that there was good compatibility between SAN resin and EPDM-g-MAN synthesized with f _AN of 10 wt% and a EPDM/MMA-AN weight ratio of 50/50.     

Chemically induced graft copolymerization of 2-hydroxyethyl methacrylate onto polyurethane surface for improving blood compatibility

To improve hydrophilicity and blood compatibility properties of polyurethane (PU) film, we chemically induced graft copolymerization of 2-hydroxyethyl methacrylate (HEMA) onto the surface of polyurethane film using benzoyl peroxide as an initiator. The effects of grafting temperature, grafting time, monomer and initiator concentrations on the grafting yields were studied. The maximum grafting yield value was obtained 0.0275 g/cm² for HEMA. Characterization of the films was carried out by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), water contact angle measurements. ATR-FTIR data showed that HEMA was successfully grafted onto the PU films surface. Water contact angle measurement demonstrated the grafted films possessed a relatively hydrophilic surface. The blood compatibility of the grafted films was preliminarily evaluated by a platelet-rich plasma adhesion test and hemolysis test. The results of platelet adhesion experiment showed that polyurethane grafted polymerization with monomer of 2-hydroxyethyl methacrylate had good blood compatibility featured by the low platelet adhesion. Hemolysis rate of the PU-g-PHEMA films was dramatically decreased than the ungrafted PU films. This kind of new biomaterials grafted with HEMA monomers might have a potential usage for biomedical applications.     

Kevlar纤维表面接枝改性及其稳定化

文章试图通过化学处理方法在Kevlar纤维表面引入活性基团,从而达到对Kevlar纤维进行表面接枝改性的目的。采用红外光谱分析甲苯-2,4-二异氰酸酯(TDI)接枝kevlar纤维的表面组成,用己内酰胺及聚乙二醇PEG(400)对接枝物进行封端稳定化处理;分析了不同n_TDI∶n_PEG值对其产物表面组成的影响。实验结果表明,当n_TDI∶n_PEG=1∶3时, 接枝后红外谱图在3 300 cm-1处的吸收峰强度有所减弱,而在1 700～1 720 cm-1处得到加强;当n_TDI∶n_PEG=1∶1和1∶2时,接枝后红外谱图在3 300及1 700～1 720 cm-1处的吸收峰强度基本相同。n_TDI∶n_PEG=1∶3时稳定化效果最佳。     

Composite of synthetic mica with polymers: grafting of polymers with controlled molecular weight onto synthetic mica by use of living polymer cation

The grafting of polymers onto synthetic mica surface and formation of an interlayer by the termination of living polymer cation with amino groups introduced onto the synthetic mica was investigated. The introduction of amino groups onto the synthetic mica was achieved by the reaction of silanol groups with γ-aminopropyltriethoxysilane. It was found that living poly(isobutyl vinyl ether) (polyIBVE) and living poly(2-methyl-2-oxazoline) (polyMeOZO) cations with controlled molecular weight and narrow molecular weight distribution were successfully terminated by amino groups of synthetic mica, and the corresponding polymers were grafted onto the surface and interlayer of the mica. The grafting of polyIBVE and polyMeOZO on the synthetic mica decreased with increasing molecular weight of the living polymer cations. The effect of reaction temperature on the grafting of polyMeOZO onto the synthetic mica was examined. The X-ray diffraction curves of polyMeOZO-grafted synthetic mica have a peak at 2 = 4.5° assigned 001 lattice spacing: the lattice spacing was expanded by the grafting of polyMeOZO in the interlayer of the synthetic mica.     

Surface modification of hydroxyapatite with poly(methyl methacrylate) via surface-initiated ATRP

This article describes the fabrication of hydroxyapatite (HAP) nanocomposites grafted with poly(methyl methacrylate) (PMMA). Surface-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was carried out from hydroxyapatite particles derivatized with ATRP initiators. The structure and properties of the nanocomposites were investigated by thermogravimetric analysis (TGA), transmission electron microscopy (TEM), differential scanning calorimeter (DSC) measurements, and contact angle analyses. TGA was used to estimate the grafting density of ATRP initiators (0.49 initiator/nm²) and the amount of grafted PMMA on the HAP surface. The contact angle analyses indicated that grafting PMMA onto the HAP surface dramatically increased the hydrophobicity of the surface. Moreover, the HAP nanocomposites showed excellent dispersibility in both aqueous solution and organic solvent.     

Environmentally friendly surface modification of silk fiber: Chitosan grafting and dyeing

In this paper, the surface modification of silk fiber using anhydrides to graft the polysaccharide chitosan and dyeing ability of the grafted silk were studied. Silk fiber was degummed and acylated with two anhydrides, succinic anhydride (SA) and phthalic anhydride (PA), in different solvents (dimethyl sulfoxide (DMSO) and N,N-dimethyl formamide (DMF)). The effects of anhydrides, solvents, anhydride concentration, liquor ratio (L:R) and reaction time on acylation of silk were studied. The polysaccharide chitosan was grafted to the acylated silk fiber and dyed by acid dye (Acid Black NB.B). The effects of pH, chitosan concentration, and reaction time on chitosan grafting of acylated silk were investigated. The physical properties show sensible changes regardless of weight gain. Scanning electron microscopy (SEM) analysis showed the presence of foreign materials firmly attached to the surface of silk. FTIR spectroscopy provided evidence that chitosan was grafted onto the acylated silk through the formation of new covalent bonds. The dyeing of the chitosan grafted-acylated silk fiber indicated the higher dye ability in comparison to the acylated and degummed silk samples. The mechanism of chitosan grafting over degummed silk through anhydride linkage was proposed. The findings of this research support the potential production of new environmentally friendly textile fibers. It is worthwhile to mention that the grafted samples have antibacterial potential due to the antibacterial property of chitosan molecules.     

Impact of γ-rays on constructional,optical and thermal behavior of alkaline and non alkaline low density polyethylene

ABSTRACT

In this study, we investigated the graft copolymerization of methyl methacrylate (MMA) onto low-density polyethylene (LDPE) in the presence of aniline as an inhibitor by gamma radiation. An alkaline treatment was carried out for the prepared graft copolymer. The structural properties of the prepared samples were examined via X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD peaks were slightly shifted, indicating an interaction between MMA and the polyethylene matrix. The morphology of the samples confirmed the homogenous grafted phase scattered onto the LDPE surface. Analysis of the absorption spectra indicated an allowed indirect transition mechanism. The Urbach energy (E_U) results showed that the value of the E_U for grafted LDPE was found to be higher than that of pure LDPE—up to 15?kGy irradiation dose, although this value decreases upon grafting. However, the value of the E_U for alkaline-treated grafted films decreases systematically by increasing the degree of grafting. The thermogravimetric analysis (TGA) of the sample indicated that the thermal stability of LDPE samples is significantly changed by grafting MMA onto it. Horowitz and Metzger's models were utilized to measure the activation energy of the thermal decomposition of all samples.     

Parametric Studies on the Grafting of Poly(Methyl Methacrylate) onto Organophilic Montmorillonite Using Silylated Clay Platelets

Poly(methyl methacrylate) (PMMA)/organophilic montmorillonite (Cloisite 30B) nanocomposites were synthesized by the chemical grafting of PMMA onto Cloisite 30B via solution polymerization of methyl methacrylate (MMA) with vinyl-modified organoclay. The effects of different parameters such as clay weight percent (CWP), solvent per monomer volume ratio, and dispersion time on the properties of the PMMA grafted Cloisite 30B were investigated using the Taguchi experimental design method. This method gives a much-reduced variance for the experiments with optimum setting of control parameters and provides a set of minimum experiments compared to the conventional methods. Qualitative evidence for the chemical grafting of the PMMA onto Cloisite 30B was confirmed by Fourier transform infrared spectroscopy (FT-IR). X-ray diffraction (XRD) was used to investigate interlayer changes of the clay in the grafted nanoplatelets. The exfoliated/intercalated morphology of the nanocomposites was confirmed by XRD. Furthermore, thermal properties were measured by thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA). Statistical analysis of results revealed that clay weight percent and solvent per monomer ratio had significant effects on the properties of final products. The percent of grafted PMMA and storage modulus of PMMA/30B nanocomposites decreased with increasing clay content due to better dispersion of the clay at lower loadings. On the other hand, because of a tendency to formation of homopolymer and oligomers at higher solvent loadings; the percent of grafted PMMA, storage modulus and glass transition temperature of PMMA/30B nanocomposites decreased with an increase in solvent per monomer volume ratio. However, the obtained PMMA/30B nanocomposites at the optimum conditions, was exhibited a higher glass transition temperature, higher storage modulus and better thermal stability than the pure PMMA.     

Surface modification of calcium carbonate: radical graft polymerization of vinyl monomers onto calcium carbonate surface initiated by azo groups introduced onto the surface

—The preparation of calcium carbonate modified by 12-hydroxystearate groups and the grafting of polymers onto the surface by the polymerization of vinyl monomers initiated by azo groups introduced onto the surface were investigated. The preparation of calcium carbonate modified by 12-hydroxystearate was achieved by the reaction of calcium chloride with sodium carbonate containing a small amount of sodium 12-hydroxystearate. The introduction of azo groups onto calcium carbonate was successfully achieved by the direct condensation of the carboxyl group of 4,4'-azobis(4-cyanopentanoic acid) with 12-hydroxystearate groups on the modified calcium carbonate using N,N'-dicyclohexylcarbodiimide as a condensing agent. It was found that the radical polymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole (NVC), was initiated by azo groups introduced onto the surface, and the corresponding polymers were grafted onto the surface based on the propagation of polymer from the surface: the percentage of grafting of polyMMA, polystyrene, and polyNVC reached 5.7, 9.5 and 3.5%, respectively, at 70°C. The percentage of grafting was found to decrease with decreasing monomer concentration. The wettability of calcium carbonate surface was found to turn from hydrophilic to hydrophobic by the grafting of polymers.     

Grafting of polymers onto graphene oxide by cationic and anionic polymerization initiated by the surface-initiating groups

The grafting of polymers onto graphene oxide (GO) was achieved by two process: (1) cationic polymerization initiated by carboxyl (COOH) groups on GO and (2) anionic alternating copolymerization of epoxides with cyclic acid anhydrides initiated by potassium carboxylate (COOK) groups on GO. The cationic polymerizations of isobutyl vinyl ether and N-vinylcarbazole were successfully initiated by COOH groups on GO to give the corresponding polymer-grafted GO. The cationic polymerization was considered to be initiated by proton addition from COOH groups to monomer and propagation of polymer cation proceeds with carboxylate anion as a counter ion. It was found that the corresponding polymer was successfully grafted onto GO based on the termination reaction of growing polymer cation and surface counter carboxylate anion. On the other hand, the anionic ring-opening alternating copolymerization of epoxide and cyclic acid anhydrides were also initiated by COOK groups on GO, which were previously introduced onto GO by the neutralization of COOH groups with KOH. During the anionic ring-opening copolymerization of styrene oxide (SO) with phthalic anhydride (PAn) and maleic anhydride (MAn), the corresponding polyesters, poly(SO-alt-PAn) and poly(SO-alt-MAn), were successfully grafted onto GO, based on the propagation of the polyesters from COOK groups. The grafting of polymers onto GO during the above cationic and anionic polymerizations was confirmed by thermal decomposition gas chromatogram/mass spectrum. The untreated GO in THF was immediately precipitated within 15 min. On the contrary, these polymer-grafted GOs gave stable dispersions in THF and no precipitation of polymer-grafted GOs was observed even after one week.     

Surface modification with both phosphorylcholine and stearyl groups to adjust hydrophilicity and hydrophobicity

A new monolayer film with tunable hydrophilicity and hydrophobicity was constructed on glass coverslips by stepwise grafting with both phosphorylcholine (PC) and stearyl groups. The glass coverslips were firstly hydroxylized to provide reactive sites on the surfaces. Subsequently, chlorodimethyl-n-octadecylsilane was chemically adsorbed onto the surface to impart the required hydrophobicity. The remaining hydroxyl groups were grafted with 1,6-diisocyanatohexane. Finally, 2-hydroxy-2-ethylphosphorylcholine was grafted onto the attached isocyanate groups. Dynamic contact angle (DCA) measurement and X-ray photoelectron spectroscopy (XPS) analysis confirmed that the step-by-step modification process was successful. The adsorption of bovine serum albumin and bovine plasma fibrinogen, as well as the adhesion and aggregation of platelets were suppressed with the introduction of phospholipid moieties on the surfaces. This tunable surface may have potential applications in the fields of separation science, tissue engineering, cytobiology, drug delivery and gene therapy.     

Study by 1H NMR of the Influence of the Porosity and Solvent on the Conformations of Macromolecules at an Interface: Poly(Ethylene Oxide) Grafted on Silica

The ¹H NMR technique was used to study the behaviour of poly(ethylene oxide) chains grafted chemically on silica. A noticeable influence of the nature of the surface and solvent on the conformation of the grafted macromolecules was observed. For precipitated silica the chains adopted a disordered conformation whereas for pyrogenic silica they formed a more uniform layer. The grafting ratio and the solvent can both modify the conformations of the chains. The dependence of the relaxation times (T₁ and T₂) on the grafting ratios is discussed qualitatively from a phenomenological point of view. Different models are proposed for the two extreme grafting ratio levels in both the absence and the presence of solvent. Without solvent, for both grafting ratios, the macromolecules lie very flat on the silica and the layer is more organized, especially at high grafting ratio. In the presence of solvent the chains spread out in the solvent, adopt a more extended conformation and the local concentration of monomers at the surface decreases.     

四臂星型聚电解质刷在外加三价盐离子和电场下的塌缩

本文采用Langevin动力学模拟的方法,研究存在三价盐离子时,接枝在带相反电荷的极板上的部分带电的四个臂星型链呈现出的塌缩现象. 结果表明,在电场作用下,接枝星型链的平均带电分数和盐浓度在带电单体和三价盐离子的竞争性吸附中起关键作用. 对于接枝在带相反电荷的极板上的带电分数较高的星型链,刷子会塌缩到接枝极板上,并会产生极板表面电荷的过度补偿现象. 当带电分数较低时,如果星型链所带电荷数与三价盐离子电荷数相同,即使在很低的盐浓度下,极板对三价盐离子的吸引能力也高于对星型链中的带电单体的吸引. 结果表明,星型链在带电分数较低的情况下,三价盐离子的加入不会导致接枝电极表面电荷的过度补偿. 此外,本文还研究了三价盐离子对电场作用下星型刷的拉伸的影响.     

Radiation synthesis of acrylamide/N,N-(dimethylamino) ethyl methacrylate grafted onto low density polyethylene films

Radiation-induced graft copolymerization of acrylamide/N,N-(dimethylamino) ethyl methacrylate (AAm/DMAEMA) onto low density polyethylene films was carried out. The effect of grafting conditions such as solvent type and comonomer composition were studied. Characterization of the prepared films was investigated by Fourier transform infrared. Some selected properties such as thermal stability and swelling behavior were determined. It was found that grafting efficiency, swelling behavior and thermal stability increased with increasing DMAEMA content. Scanning electron microscopy was used for predicting the change in surface morphology via the grafted films. The improvement in properties of the prepared films make it possible to use them in some practical applications.     

Radiation graft copolymerization of butyl methacrylate and acrylamide onto low density polyethylene and polypropylene films,and its application in wastewater treatment

Butyl methacrylate and acrylamide (BMA/AAm) comonomers were grafted onto low-density polyethylene (LDPE) and polypropylene (PP) films using the mutual gamma radiation grafting technique. The influences of grafting conditions such as solvent, monomer concentration, monomer composition, and irradiation dose on the grafting yield were determined. It was found that using dimethyl formamide as a solvent enhanced the copolymerization process. The grafting yield increases as the comonomer concentration increases up to 60%. Also it was found that the degree of grafting of BMA/AAm onto both LDPE and PP films increases as the AAm content increases till an optimum value at 50:50 wt%. The grafting yield of the comonomers was found to increase with increase in the radiation dose. It was observed that the degree of grafting of polyethylene films is higher than that of polypropylene (PP) films at the same conditions. Some selected properties of the graft copolymers, such as water uptake and thermal properties, were determined using thermogravimetric analysis. The morphology and structure of the grafted films were investigated using scanning electron microscopy, infra-red, and X-ray diffraction. Improvement in such properties of the prepared copolymers was observed which offers possible uses in some practical applications such as the removal of some heavy metals from wastewater. It was found that the maximum metal uptake by the copolymer followed the order Cu²⁺>Co²⁺>Ni²⁺ ions.     

Radical grafting from carbon fiber surface: graft polymerization of vinyl monomers initiated by azo groups introduced onto the surface

This paper describes the radical graft polymerizations of vinyl monomers from carbon fiber surface initiated by azo groups introduced onto the fiber surface. The carbon fiber used in this experiment was the polyacrylonitrile type. The introduction of azo groups onto the carbon fiber surface was achieved by the reaction of 4,4'-azobis (4-cyanopentanoic acid) with isocyanate groups which were previously attached onto the surface by the treatment of the fiber with tolylene 2,4-diisocyanate. The amount of surface azo groups introduced onto nitric acid-treated carbon fiber was determined to be 0.60 x 10^-5 mol 9^-1 by nitrogen analysis. The radical graft polymerization of methyl methacrylate (MMA) was tried. Though the thermal polymerization of MMA proceeded slightly in the absence or in the presence of untreated carbon fiber, the rate of the polymerization was considerably low. In contrast, the graft polymerization of MMA was initiated in the presence of the carbon fiber having surface azo groups, and part of resultant poly(MMA) grafted onto the surface. The percentage of grafting increased with an increase in polymerization time and reached 42.8% after 24 h. The graft polymerizations of other monomers, such as styrene, vinyl acetate, and acrylic acid, were also initiated by the surface azo groups attached onto the carbon fiber, and the corresponding polymer effectively grafted onto the surface.     

Nanomaterials based upon silylated layered double hydroxides

A class of nanomaterials based upon the surface modification of layered double hydroxides (LDHs) have been synthesized by grafting silanes onto the surfaces of the LDH. By in situ coprecipitation, the surfaces of a LDH have been modified through grafting of 3-aminopropyltriethoxysilane (APTS) using the anionic surfactant Na-dodecylsulfonate (SDS). The synthesized nanomaterials were characterized by X-ray diffraction (XRD), attenuated total reflection Fourier-transform infrared spectroscopy (ATR FTIR), thermogravimetry (TG) and transmission electron microscopy (TEM). The grafted LDH (LDH-G) displays distinct XRD patterns proving the obtained materials are a new and different phase. The FTIR spectra of the silylated hydrotalcite show bands attributed to Si-O-M (M = Mg and Al) vibration at 996 cm⁻¹, suggesting that APTS has successfully been grafted onto the LDH layers. The TG curves prove the grafted sample has less M-OH concentration and less interlayer water molecules, as indicated by the M-OH consumption during the condensation reaction between Si-OH and M-OH on the LDH surface. The grafted sample displays a ribbon-like thin sheet in the TEM images, with the lateral thickness estimated as 2.5 nm.     

Studies on surface graft polymerization of acrylic acid onto PTFE film by remote argon plasma initiation

The graft polymerization of acrylic acid (AAc) was carried out onto poly(tetrafluoroethylene) (PTFE) films that had been pretreated with remote argon plasma and subsequently exposed to oxygen to create peroxides. Peroxides are known to be the species responsible for initiating the graft polymerization when PTFE reacts with AAc. We chose different parameters of remote plasma treatment to get the optimum condition for introducing maximum peroxides (2.87 × 10⁻¹¹ mol/cm²) on the surface. The influence of grafted reaction conditions on the grafting degree was investigated. The maximum grafting degree was 25.2 μg/cm². The surface microstructures and compositions of the AAc grafted PTFE film were characterized with the water contact angle meter, Fourier-transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). Contact angle measurements revealed that the water contact angle decreased from 108° to 41° and the surface free energy increased from 22.1 × 10⁻⁵ to 62.1 × 10⁻⁵ N cm⁻¹ by the grafting of the AAc chains. The hydrophilicity of the PTFE film surface was greatly enhanced. The time-dependent activity of the grafted surface was better than that of the plasma treated film.