Determination of Coenzyme II Using Balofloxacin–Terbium(III) as a Fluorescence Probe by Spectrofluorometry

Abstract

A new spectrofluorometric method was developed for determination of coenzyme II. We studied the interactions between balofloxacin–terbium(III) complex and coenzyme II by using ultraviolet–visible absorption and fluorescence spectra. While balofloxacin–terbium(III) was used as a fluorescence probe, under the optimum conditions, coenzyme II could remarkably enhance the fluorescence intensity of the balofloxacin–terbium(III) complex at λ = 545 nm, and the enhanced fluorescence intensity was in proportion to the concentration of coenzyme II. Optimum conditions for the determination of coenzyme II were also investigated. The dynamic range for the determination of coenzyme II was 6.0 × 10^?8 to 6.0 × 10^?6 mol L^?1, and the detection limit (3σ/k) was 3.5 × 10^?8 mol L^?1. This method was simple, practical, and relatively free interference from coexisting substances and could be successfully applied to determination of coenzyme II in synthetic samples. The mechanism of fluorescence enhancement of balofloxacin–terbium(III) complex by coenzyme II was also discussed.     

Room Temperature Phosphorescence Optosensor for Terbium

Abstract

A solid surface room temperature phosphorescence optosensing method has been developed for the determination of terbium(III) based on the adsorption of its binary complex with 1,4-bis (l'-phenyl-3′-methyl-5′-pyrazolone-4′-) butanedione-(1,4) (BPMPBD) onto the hydrogen form of a strong cation exchange resin packed in a flow cell in an aqueous flow system. The phosphorescence intensity is a linear function of the concentration of terbium in the range of 8x10^?9 M-6x10^?7 M, and the detection limit is 3x10^?9 M terbium. The response mechanism was also studied. The present optosensor has been used for the determination of trace amounts of terbium in synthetic samples with satisfactory results.     

Delayed lanthanide luminescent Tb(III) complexes formed from lower rim amide functionalised calix[4]arenes

The synthesis and the photophysical studies of a new generation of time resolved luminescent systems based on calix[4]arenes alkylated at the lower rim, capable of hosting lanthanide (III) ions such as terbium and sensitising its emission, are described. Two series of ligands were designed to provide an ideal cavity to host terbium (Tb(III)) and were synthesised in high yields following two novel approaches. The tetra-alkylation, which was achieved in one step using with piperidino- and morpholino-acetamide pendant arms, provides eight donor atoms forming a binding ‘pocket’ at an ideal distance from the metal core to favour the sensitisation via the antenna effect. Of the two ligand series developed, compounds 3 and 4 possess a short spacer between the calix and the amide receptor site. The second series of ligands 6–7, designed with longer pendant amide arms, was synthesised from 2 in two steps through the ester analogue 5. The crystal structure of 3 (and 6 as shown in Supporting Information, available online) is presented. The synthesis and the photophysical studies of the four resulting complexes 3.Tb, 4.Tb, 6.Tb and 7.Tb are described in detail and in each case, successful sensitisation of the terbium emission occurred upon excitation of the phenolic scaffold of the calixarene.     

X-Ray Diffraction Analysis and Luminescent Study of the Structure of the Tb2(CF3COO)6(H2O)6 Dimer Obtained from Terbium(III) Carbonate

The molecular and crystal structure of the terbium(III) trifluoroacetate trihydrate dimer synthesized from terbium(III) carbonate was studied by X-ray diffraction (XRD) analysis. Luminescent data unambiguously show that the compound is one of the isomers of Tb₂(CF₃COO)₆(H₂O)₆ composition. Evidence has been found for the presence of another isomer in the terbium(III) dimer obtained from terbium(III) hydroxide.     

Terbium(III) as fluorescence probe in the study of the interaction of rare earth and transition metal ions with concanavalin A

The binding site for calcium (II) on concanavalin A (con-A) can be occupied by rare earth ions. When terbium (III) ion binds to con-A, its fluorescence intensity is tremendously enhanced because of an energy transfer from one or more tryptophan residues in close proximity to the bound terbium (III). The dissociation constant of the con-A-Tb (III) complex is 8.90 × 10^?6M, obtained from terbium (III) fluorescence titration with con-A. The dissociation constant of the complexes of con-A with other rare earth and transition metal ions was obtained through their competition with terbium (III) in the reaction with con-A, i. e. the quenching of con-A enhanced fluorescence. The results indicate that the binding of rare earth ions with con-A is dependent not only on their ionic radius but also on the hard-soft acid-base strength of the metal ions.     

Fluorescence enhancement of terbium(III) by nucleotides and polyhomonucleotides in the presence of phenanthroline

Summary The fluorescence enhancement of terbium(III) by nucleotides (AMP, ADP, ATP, GMP, GDP, GTP) and polyhomonucleotides [poly(A), poly(G), poly(C), poly(U)] in the presence of phenanthroline (phen) was studied. Investigation of the composition of the terbium(III)/ANP(AMP, ADP, ATP)/phen complexes and conditions of optimization suggest a 1:2 molar ratio of terbium(III) and phen for the ternary complexes. The results showed that the presence of phen enhanced the net fluorescence of terbium(III)/ANP, poly(A), poly(C) or poly(U) from several fold to more than one-hundred fold, while it has little effect on the fluorescence of terbium(III)/GNP(GMP, GDP and GTP) or the poly(G) system. The possibility of spectrofluorimetric measurements of these compounds were studied under optimal conditions (pH 7.0 in tris-HCl buffer; E_x=298 nm, E_m=543.5 nm). The detection limits were 2.0×10^–7, 6.0×10^–7 and 1.0×10^–6 mol/l for AMP, ADP and ATP, respectively. The relative standard deviations (6 replicates) were within 2.0% in the middle of the linear range.     

Spectrofluorimetric determination of trace amounts of Tb(III) using acetylacetone in ethanol solution

Summary The spectrofluorimetric determination of terbium(III) in ethanol (95%) solution of acetylacetone (3×10^–4 mol/l) was studied. Intensive fluorescence of terbium(III) (=545 nm) was observed after excitation of the system (=310 nm). The method proposed is satisfactory for the determination of terbium(III) in the range of 4 to 40 ng/ml (2.5×10^–8 to 2.5×10^–7 mol/l). The effect of other rare earths, common metal ions and anions upon the intensity of the fluorescence emitted by terbium(III) is discussed.

---

Spektrofluorimetrische Bestimmung von Tb(III)-Spuren mit Acetylaceton in Ethanollösung

     

Luminescent properties of europium(III) and terbium(III) complexes with para- and ortho-ethoxybenzoic acids

The luminescent properties of europium(III) and terbium(III) complexes with para- and ortho-ethoxybenzoic acids are studied. The excitation energies of the triplet states of ligands are determined, a hypothesis is made about the efficient luminescence of europium(III) and terbium(III) complexes, the geometry of the coordination polyhedron of a europium complex is established, and the luminescence quantum yields of the complexes in solution are determined.     

Spectrofluorimetric determination of terbium as its ternary complex with edta and tiron Compositional studies,optimization of fluorescence output and conversion to a flow system

The spectrofluorimetric determination of terbium(III) as its ternary complex with EDTA and Tiron was studied further with regard to composition of the complex and the procedure was optimized by a simplex method. The results suggest a 1:1 molar ratio of terbium to Tiron for the ternary complex. The optimization study indicated that the three chosen variables (pH, and EDTA and Tiron concentration) are not interactive. The method was converted for use in a segmented-flow system with basic Technicon units and a spectrophotofluorimeter as detector. This procedure is satisfactory for the determination of terbium(III) in the range 0.03–0.24 μg ml^?1 at a sampling rate of 30 h^?1. Results were satisfactory for the determination of terbium in lanthanide oxides, mixed oxides, the mineral bastnasite and a green phosphor (Gd_0.96 Ce_0.02 Tb_0.02 F₃).     

Spectrofluorimetric trace determination of terbium(III) with potassium oxalate

Potassium oxalate acts as a specific reagent in enhancing the fluorescence intensity of terbium in aqueous solutions. Maximum fluorescence intensity is obtained by irradiating (at 255 mμ) terbium(III) dissolved in 0.01 M potassium oxalate solution at pH 7.8. The enhancement and quenching phenomena caused by other lanthanides, errors in the determination, and various examples of spectrofluorimetric analysis of traces of terbium in mixtures with other lanthanides are described. The sensitivity of the method is 5·10^-2μg/ml of terbium.     

Application of time-resolved luminescence to dry reagent chemical technology

A time-resolved luminescence method describing the use of terbium(III) in the dry reagent format is presented for the first time. Paper strips previously treated with sucrose are used as solid substrates where terbium(III) is immobilised by adsorption. The strips are stable for at least 6 months and they can be easily stored under a desiccant medium. Only the addition of the buffered sample is required for the analysis. This methodology has been applied to the determination of two local anaesthetics, namely benzocaine and procaine. These compounds release p-aminobenzoic acid after a hydrolysis step in alkaline medium, which reacts to terbium(III) giving a luminescent chelate. The luminescence intensity measurements are obtained at λ_ex 286 and λ_em 545 nm by using the time-resolved mode of the instrument. The method presents a linear range from 1.1 to 21.9 μM and the calculated LOD is 0.4 μM. It has been satisfactorily applied to the analysis of pharmaceutical samples and the recoveries obtained are in the range 88-108%.     

Synthesis of a 3-D porous Tb-MOF: organic dye adsorption

A 3-D lanthanide metal–organic framework, [Tb₂(L)_1.5(DMF)₂]·2DMF (1) (L = 14-diylbis(acylamino-21-diyl))-diisophthalic acid), has been synthesized under solvothermal conditions. 1 was characterized by X-ray single-crystal analysis and powder X-ray diffraction. The 3-D framework of 1 is constructed by 2-D channels embedded in a plane. Network analysis reveals that 1 is a (4,5,6,6)-connected net with stoichiometry (4-c)₂(5-c)₂(6-c)₃. As expected, this terbium(III) metal–organic framework exhibits good properties for adsorbing organic dye molecules due to its NH- group. It shows good adsorption selectivity for rhodamine B (RB) rather than methyl orange (MO) and methylene blue (MB) molecules.     

Three new lanthanide compounds based on nitronyl nitroxide radical: Crystal structure,magnetic properties,and luminescence properties

Three new lanthanide compounds were obtained using 2-(3-methylthiophene)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide) (NIT-3Methien). These compounds, [Gd(hfac)₃(NIT-3Methien)₂]?0.5CH₃(CH₂)₅CH₃ (1: Half n-heptane trihexafluoroacetylacetonate-di-2-(3-methylthiophene)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide gadolinium(III)), [Tb(hfac)₃(NIT-3Methien)₂]?0.5H₂O (2: Half Hydrate trihexafluoroacetylacetonate-di-2-(3-methylthiophene)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide terbium(III)), and [Dy(hfac)₃(NIT-3Methien)₂]?0.5H₂O (3: Half Hydrate trihexafluoroacetylacetonate-di-2-(3-methylthiophene)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide dysprosium(III)), (CH₃(CH₂)₅CH₃ = n-heptane), (hfac = hexafluoroacetylacetonate), were characterized structurally and magnetically. The three compounds crystallize in the triclinic space group P1( - ). Ln(III) ion was eight-coordinate by six oxygens from three hfac ligands and two oxygens from two radicals. In 1, direct current (DC) magnetic studies reveal ferromagnetic interactions between the Gd(III) ion and radicals with J₁ = 0.94 cm^?1. In 2 and 3, there are antiferromagnetic interactions between the Tb(III), or Dy(III) ions and radicals. The luminescence characterizations show that 2 exhibits highly selective luminescent sensing of Cr₂O₇^2? ions.     

Luminescent properties of Ba_3(PO_4)_2:Eu,Tb phosphors

Luminescence of europium (Ⅲ),europium(Ⅱ) and terbium(Ⅲ) has been observed in Bas(PO4)2:Eu,Tb phosphors which are synthesized in air atmosphere.The valence state of europium is influenced by amount of terbium.It is notable that the relative intensity of the emission spectra peaks corresponding to Eu2+ is increased if the amount of Tb3+ is increased.These phenomena can be explained by an electron transfer mechanism.We predict a new kind of two-rare-earth codoped trichromatic phosphors in Ba3(PO4)2 matrix.     

Photoluminescence of terbium-containing sol-gel glasses

Glasses of the following composition: T glass SiO₂, TL glass SiO₂/ligand, T-Tb glass SiO₂/terbium complex were obtained by the method of acid catalyzed hydrolytic homo- and cocondensation of tetraethoxysilane (the source of SiO₂) with 3-(3-triethoxysilylpropyl)pentane-2,4-dione (the ligand) and terbium(III) tris[3-3-triethoxysilylpropyl)pentane-2,4-dionate] (terbium complex). The study of the fluorescence spectra showed that the cationic luminescence is achieved by the excitation of terbium-containing glasses at the absorption band of the ligand (λ_exc 275–280 nm). Energy transfer from the matrix (SiO₂) to the ligand and cation with the following emission of Tb³⁺ is possible on exciting the T-Tb glass by the light with the wavelength 360 nm. However, this method of generating terbium cation emission seems to be less efficient.     

The crystal structure of a Terbium(III) complex with 1,1-Cyclobutanedicarboxylic acid

A complex of 1,1-cyclobutanedicarboxylic acid with terbium was obtained as a pentahydrate. The salt crystallizes in the monoclinic system, space group P2₁/n with a = 15.885(3), b = 8.489(2), c = 19.189(4)?Å, β = 106.02(3)° and Z = 4. The structure was solved by direct methods and refined to R = 0.0537. The complex forms polymeric chains in which terbium(III) ions are linked by carboxylate bridges. Each terbium cation is surrounded by carboxylate oxygen atoms and two or three water oxygen atoms, giving coordination number 9. The structure is stabilized by a system of hydrogen bonds.     

Luminescence determination of DNA using terbium complexes with 2-oxo-4-hydroxyquinoline-3-carboxylic acid amides as probes

It was found that the presence of DNA significantly enhanced the 4f luminescence of terbium(III) in its complexes with a number of 2-oxo-4-hydroxyquinoline-3-carboxylic acid amide derivatives (L₁-L₆). For the high-sensitivity determination of DNA, L₁ and L₄ were chosen from two proposed groups, in complexes with which terbium ions exhibited the most intense luminescence. Under optimum conditions, the luminescence intensity of terbium was proportional to the concentration of DNA over the ranges 0.025–1.2 μg/mL (detection limit of 10 ng/mL) and 0.01–1.2 λg/mL (detection limit of 3 ng/mL) for L₁ and L₄, respectively. The mechanisms of the interaction of Tb-L complexes with DNA molecules were hypothesized.     

Electroanalytical performance of a terbium(III)-selective sensor based on a neutral ionophore in environmental and medicinal samples

A new highly selective terbium(III) electrode was prepared with a polymeric film doped using S-2-benzothiazolyl-2-amino-α-(methoxyimino)-4-thiazolethiol acetate as an electroactive material, benzyl acetate (BA) as a plasticizer, and potassium tetrakis(4-chlorophenyl) borate (KTpClPB) as an anionic site in the percentage ratio 3.17:1.58:63.4:31.7 (ionophore-KTpClPB-BA-PVC, w/w). The electrode exhibited a linear response with a near Nernstian slope of 19.5 mV/decade within the concentration range 1.5 × 10⁻⁷−1.0 × 10⁻² M terbium ions, with a working pH range from 2.0 to 8.0, and a fast response time of 10 s and presented satisfactory reproducibility. The limit of detection was 9.3 × 10⁻⁸ M. The results show that this electrode can be used in ethanol media up to 30% (v/v) concentration without interference. It can be used for 3 months without any considerable divergence in the potentials. Selectivity coefficients for terbium(III) with respect to many cations were investigated. The electrode is highly selective for terbium(III) ions over a large number of monovalent, bivalent, and trivalent cations. This shows the valuable property of the proposed electrode. The stability constant of the ionophore towards Tb³⁺ ions was determined with the sandwich membrane method. It was successfully used as an indicator electrode in potentiometric determination of terbium(III) ions with EDTA and in direct determination in tap water and binary mixtures with quantitative results. The utility of the proposed electrode was also determined in the presence of ionic and nonionic surfactants and in the presence of fluoride ions in four pharmaceutical (mouthwash) preparations. Figure Structure of S-2-Benzothiazolyl-2-amino-α-(methoxyimino)-4-thiazolethiol acetate     

Interaction of Tb(III) and hydrolyzed polyacrylamides in solution as a gel and in the solid state

Formation of the HPAM-Tb³ complex in solution was observed in the intensification of Tb(III) fluorescence, viscosity, and light scattering. The interaction is dependent on the degree of hydrolysis of the copolymer and the pH of the solution. As the pH value increases, an intensification of the interaction and formation of a gel is observed. The latter was associated with the appearance of crosslinks in which terbium, or one of its hydrolysis products, works as a binding agent between chains. After drying, the characterization of the residues of the gels was effected by analytical determination (C, H, N, Cl, Tb), fluorescence, and infrared spectrophotometry. The analysis and fluorescence revealed the existence of particles of terbium hydroxide; the infrared spectrophotometry showed the binding of terbium (III) to carboxylate of the copolymer.     

Chemiluminescence during thermal degradation of sodium persulfate in the presence of terbium sulfate: 2. The effect of water of crystallization

An abnormally strong influence of water of crystallization on the intensity of chemiluminescence (CL) in the thermal degradation reaction of sodium persulfate in the presence of terbium(III) sulfate was revealed. As the water is driven off terbium sulfate Tb₂(SO₄)₃ · nH₂O (n= 8–0), the luminescence intensity and light sum increase. The maximum CL intensity for the completely dehydrated sample is 20 times higher and the light sum is two orders of magnitude greater than those of the crystal hydrate containing eight water molecules. It was found that the rise in the CL yield is due to an increase in the yield of excitation of the emitter *Tb(III), rather than the yield of its emission, with a change in the coordination environment.