Determination of Chlorfenvinphos in Soils by Microwave‐Assisted Extraction and Stripping Voltammetry with an Ultramicroelectrode

Abstract

A methodology for the determination of the pesticide chlorfenvinphos by microwave‐assisted solvent extraction and square‐wave cathodic stripping voltammetry at a mercury film ultramicroelectrode in soil samples is proposed. Optimization of microwave solvent extraction performed with two soils, selected for having significantly different properties, indicated that the optimum solvent for extracting chlorfenvinphos is hexane‐acetone (1∶1, v/v). The voltammetric procedure is based on controlled adsorptive accumulation of the insecticide at the potential of?0.60 V (vs. Ag/AgCl) in the presence of Britton‐Robinson buffer (pH 6.2). The detection limit obtained for a 10 s collection time was 3.0×10^?8 mol l^?1. The validity of the developed methodology was assessed by recovery experiments at the 0.100 µg g^?1 level. The average recoveries and standard deviations for the global procedure reached by MASE‐square‐wave voltammetry were 90.2±2.8% and 92.1±3.4% for type I (soil rich in organic matter) and type II (sandy soil) samples, respectively. These results are in accordance to the expected values which show that the method has a good accuracy.     

Stability-indicating high performance thin layer chromatographic determination of sulfanilamide in human urine

A simple, sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic (HPTLC) method was developed and applied to human urine for the densitometric determination of sulfanilamide. A mixture of chloroform-ethyl acetate-xylene (2.5: 4.0: 1.0, v/v/v) was used as a mobile phase. The system was found to give compact spots for sulfanilamide (retardation factor, R _f = 0.21±0.02). The linear regression analysis data for the calibration plots showed good linear relationship with r ² = 0.9970 ± 0.0003 and r ² = 0.9947 ± 0.020 within the concentration range of 50–250 ng per spot and 100–1000 ng per spot with respect to peak area, respectively. The limit of detection (LOD) and quantification (LOQ) were 8 and 25 ng per spot, respectively. Sulfanilamide was subjected to acid and alkali hydrolysis, oxidation, dry heat and wet heat treatment. According to the International Conference on Harmonization (ICH) guidelines the method was validated for precision, recovery and robustness. The ultraviolet (UV) spectra of the degradation products which had different spectra from sulfanilamide were also recorded. The article is published in the original.     

Novel 99mTc labeled σ receptor ligand as a potential tumor imaging agent

A novel ^99mTc labeled complex, [N-[2-((2-oxo-2-(4-(3-phenylpropyl)piperazin-1-yl)ethyl) (2-mercaptoethyl)amino)acetyl]-2-aminoethanethiolato]Technetium(V) oxide (PPPE-MAMA’-^99mTcO) ([ ^99m Tc]-2) has been designed and prepared based on the integrated approach. The corresponding rhenium complex (PPPE-MAMA’-ReO)(Re-2) has been prepared and characterized. In vitro competition binding assays show moderate affinity of Re-2 towards σ₁ and σ₂ receptors with K _i values of 8.67 ± 0.07 and 5.71 ± 1.88 μmol, respectively. Planar images obtained at 0.5 h, 4 h, 20 h after i.v. injection indicate the accumulation of [ ^99m Tc]-2 in MCF-7 human breast tumor bearing mice at 20 h. Furthermore, the accumulation of [ ^99m Tc]-2 has been inhibited at 20 h after co-injection of [ ^99m Tc]-2 plus haloperidol (1 mg/kg). Biodistribution studies of [ ^99m Tc]-2 display an in vivo tumor uptake of 0.14% ± 0.01% ID/g at 24 h post i.v. injection with a tumor/muscle ratio of 6.02 ± 0.87. The above results suggest that [ ^99m Tc]-2, derived from a previously published lead compound, retains certain tumor uptake and affinity for σ receptors. [ ^99m Tc]-2 may be used as a basis for further structural modifications to develop tumor imaging agents with high affinity for σ receptors.     

High Performance Liquid Chromatographic Determination of Pirenzepine Dihydrochloride in Its Pharmaceutical Formulation

Abstract

A high-performance liquid chromatographic procedure for the determination of pirenzepine dihydrochloride as a bulk material and in its tablet dosage form (Gastrozepin^R) is presented. Normal phase liquid chromatography has been performed on a Micro-pack Si-10 column using ammonium hydroxide (28–30% NH₃) in methanol (0.75: 99.25% v/v) as mobile phase at a flow rate of 2 ml/min. Clobazam has been used as internal standard with retention times of 1.9 and 2.8 minutes for clobazam and pirenzepine dihydrochloride, respectively at 254 nm. Analytical calibration yields a linear relationship between 5 and 25 μg/ml, with correlation coefficient of 0.999. Tablets each labelled to contain 25 mg pirenzepine dihydrochloride give mean percentage found of 99.98 ± 0.4. A plot of logarithm of concentration against time for a solution in 6 N hydrochloric acid gives a straight line with a slope of - 0.197 day^?1. The proposed method is, therefore, a stability indicating method.     

Dosage direct de submicrotraces de bore dans la soude de purete analytique par la methode fluorimetrique a l'hydroxy-2-methoxy-4-chloro-4'-benzophenone

A method based on the highly sensitive fluorescent reaction of boric acid with 2-hydroxy-4-methoxy-4'-chlorobenzophenone (H.M.C.B.), is described for the direct determination of traces of boron in “analytical grade” sodium hydroxide. In the nanogram range, the reliability of the H.M.C.B. method is satisfactory; the fluorescent reaction is not affected by up to 8% (v/v) of water. The sample is dissolved directly in concentrated sulfuric acid and no preliminary separation is needed. Interferences from other impurities of sodium hydroxide are negligible. Results for five different “analytical grade” reagents were: (0.9±0.2)·10^-6,(3.2±0.3)·l0^-6,(3.2±0.3)·^-6, (4.0±0.4)·10^-6and(2.0±0.16)·10^-6% B.     

An improved method for the spectrophotometric determination of fluoride by addition of sodium dodecyl sulphate to the fluoride/lanthanum (III)/Alizarin fluorine blue system

The conventional spectrophotometric method for the determination of fluoride, based on the fluoride/lanthanum(III)/alizarin fluorine blue ternary complex, is improved by addition of sodium dodecyl sulphate. In 15% (v/v) acetone medium, the absorbance of the binary reagent complex is decreased and the reaction time is only 3 min under sonication. Beer's Law is obeyed at 574 nm for fluoride concentrations in the ranges 0.075–0.30 and 0.20–1.2 mg 1^?1; the apparent molar absorptivities are (1.6 ± 0.1) × 10⁴ and (1.5 ± 0.1) × 10⁴ mol^?1 cm^?1 fluoride levels, respectively. This method is applied to the determination of fluoride in bottled mineral waters.     

Detection of Phomenone by High-Performance Liquid Chromatography in Tomato Plants Infected by Phoma Destructiva Plowr

Abstract

Identification and quantitative determination of phomenone in ethyl acetate extracts from Tomato plants infected by Phoma destructiva Plowr., was carried out by high-performance liquid chromatography with UV detection, and ethanol-water (30/70, v/v) as mobile-phase on Perkin-Elmer RP-18/10 stainless column, at 20°C and 0.9 ml min^?1 flow rate. Detection limit was 5.5 ng, with standard deviation of ^± 3%, and retention time of 6.22 min. Analysis of extracts from spiked tomato fruits shows the same parameters. The method appears to be adequate for detection and quantitation of phomenone in contaminated tomato leaves and fruits using a pre-column packed with Lichroprep RP-18/25–40 μm.     

A Polarographic Study on Dipyridamole and its Determination in Commercial Tablets

Abstract

The direct current polarographic behaviour of dipyridamole, a coronary vasodilator, in the supporting electrolyte consisting of 0.2 M KCl, 20 % (v/v) ethanol and buffer solutions is described in this study. Morphologically well-defined DC polarographic curves have appeared within the pH range of 7–8 and the optimum polarographic conditions found were, a potential rate of 4 m V.s^?1, drop time of 1 s and a pressure of 1000 dyne.cm^?2. The factor effecting the polarographic current was diffusion-controlled and the reduction reaction was highly reversible. The effect of concentration on the limiting current was examined using DC, SCAP, SIAP and DP polarographic modes at pH 7.8 and optimum conditions. Linear calibration equations with good correlations were obtained for all techniques. DP polarography was used among the modes for the determination of dipyridamole in the tablets. The results obtained were compared with the results of the UV-spectrophotometric method. Using the Mann-Whitney U-test, it was concluded that there is an insignificant variance between the two methods. The relative standard deviations are 75±1% and 75.3±0.7% for DP polarographic and UV-spectrophotometric methods, respectively. The determination method proposed in this study seems to be accurate, rapid and practical. Therefore, it may be suitable for the content uniformity test (USP XXI).     

Determination of Total Selenium in Human Urine and Serum by Graphite-Furnace Atomic-Absorption Spectrophotometry with Palladium-Nickel-Ammonium Nitrates as a Matrix Modifier

After human urine or serum was diluted (1 + 9) with HNO₃ (0.2%, v/v) and standard additions of Se solution (100 μ L^?1), the diluted sample (10 μL) was introduced into the graphite cuvette. The matrix modifier [10μL, containing Pd (0.6 μg) + Ni (25 μg) + NH₄NO₃ (80 μg) in HNO₃ (0.2%, v/v) for urine, or Pd (0.3 μg) + Ni (30 μg) + NH₄NO₃ (80 μg) + Triton X-100 (0.04%) in HNO₃ (0.2%, v/v) for serum, respectively] was added and the mixture was heated according to a temperature program. The matrix modifier containing NH₄NO₃ in a suitable amount and a small amount of Pd enhanced the sensitivity for Se. The method detection limits (3σ) after dilution were about 4.9 ± 0.8 and 2.36 ± 0.18 μg L^?1 for urine and serum, respectively. The accuracy of this method was tested with SRM #2670 human urine Se and Seronorm Trace Elements #116 human serum Se, respectively, and the results of 97.6 – 101% and 100 – 104% were obtained with precision ± 0.3% and ± 2%, respectively. This method can be applied easily and accurately to the determination of concentration of total Se in human urine and serum.     

HPLC Quantification of Azintamide and Papaverine Hydrochloride Simultaneously in Pharmaceutical Preparations

Abstract

A simple HPLC-procedure for quantification of azintamide and papaverine. HCl simultaneouly in dosage formulations has been investigated. The complete resolution and quantitative determination of both drug substances has been undertaken on a Hibar 100RP-18 Lichrospher (5 μm) column by using a solvent mixture composed of acetonirile – water (56:44, v/v) isocratically at a rate of 1 ml·min^?1with UV-detection at 240 nm. Recovery percentages of 100.39 ± 0.70 (n = 12) and 99.97 ± 1.11 (n = 12) were obtained for added azintamide and papaverine. HCl, in order.     

A Simple and Fast Method for Manganese Determination in Antihypertensive Drugs by Slurry Sampling Graphite Furnace Atomic Absorption Spectrometry

Abstract

A simple and rapid procedure for the determination of manganese in anti‐hypertensive drugs is proposed. The samples were treated with dilute nitric acid (1.2% v/v) with stirring using a vortex stirrer to yield a slurry. To determine the best conditions for analysis by graphite furnace atomic absorption spectrometry (GF AAS), a planning factorial was initially employed that demonstrated that the non‐use of chemical modifiers and the use of lower pyrolysis temperatures were more appropriate. Next, the pyrolysis and atomization temperature curves were obtained. The best pyrolysis and atomization temperatures encountered were 500 and 2200°C, respectively. Calibration was performed by matrix matching. The characteristic mass was 0.70±0.14 pg (the recommended mass was 0.60 pg); the limits of detection and quantification were 0.23 and 0.77 µg l^?1, respectively. The precision obtained in the intra‐ and inter‐assay studies of the drug spiked with 0.5, 1.0 and 1.5 µg l^?1 of Mn did not exceed 11% (n=7). Recovery studies of the drug spiked with three levels (n=7) of Mn yielded results between 101.0±4.5 and 116.3±9.7%. The results of an analysis of a certified urine sample (two levels of Mn) agreed at a 95% level of confidence. Forty‐eight antihypertensive drug samples were analyzed, and the results varied from 2.9 ng to 1.9 µg of Mn per capsule^?1.     

Complexation equilibria and spectrophotometric determination of zinc (II) with 2-(4′-methyl-2′-thiazolylazo)-4,6-dimethylphenol

2-(4′-methyl-2′-thiazolylazo)-4,6-dimethylphenol has been synthesized and its acid—base behaviour (pK_a1=0.03 ± 0.01, pK_a2=9.70±0.09) and complexation equilibria with zinc (logβ₁₀₁=6.70±0.04, logβ₁₀₂ = 13.70±0.02) studied in a 40% (v / v) ethanol—water medium at I=0.25 M NaClO₄. A spectrophotometric method for the determination of 0.2–1.5 ppm of zinc has been developed (ε=1.83 × 10⁴ 1. mol⁻¹ cm⁻¹ at 590 nm) and applied to its determination in lubricating oils.     

Spectrophotometric Determination of Zinc in Pharmaceutical and Biological Samples with Di‐2‐pyridyl Ketone Benzoylhydrazone: a Simple,Fast, Accurate and Sensitive Method

Abstract

A simple, fast, accurate, and sensitive spectrophotometric method was developed to determine zinc(II). This method is based on the reaction of Zn(II) with di‐2‐pyridyl ketone benzoylhydrazone (DPKBH), at pH=5.5 and 50% (v/v) ethanol. Bee?s law was obeyed in the range 0.020–1.82 µg mL^?1 with a molar apsorptivity of 3.64×10⁴ L mol^?1 cm^?1, and a detection limit (3δ) of 2.29 µg L^?1. The action of some interfering ions was verified and the developed method applied to pharmaceutical and biological samples. The results were then compared with those obtained by using a flame atomic absorption technique.     

An LC–MS/MS method for the quantification of diclofenac sodium in dairy cow plasma and its application in pharmacokinetics studies

An LC–MS/MS method with internal standard tolfenamic acid for determining diclofenac sodium (DCF) in dairy cow plasma was developed and validated. Samples were processed with protein precipitation by cold formic acid–acetonitrile. Determination of DCF was performed using LC–ESI⁺–MS/MS with the matrix‐matched calibration curve. The results showed that the method was sensitive (LOD 2 ng mL^?1, LOQ 5 ng mL^?1), accurate (97.60 ± 5.64%), precise (<10%) and linear in the range of 5–10,000 ng mL^?1. A single intravenous (i.v.) or intramuscular (i.m.) administration of 5% diclofenac sodium injection at a dose of 2.2 mg kg^?1 was performed in six healthy dairy cows according to a two‐period crossover design. The main pharmacokinetic (PK) parameters after a single i.v. administration were as follows: t_1/2β, 4.52 ± 1.71 h; AUC, 77.79 ± 16.76 h μg mL^?1; mean residence time, 5.16 ± 1.11 h. The main PK parameters after a single i.m. administration were as follows: T_max, 2.38 ± 1.19 h; C_max, 7.46 ± 1.85 μg mL^?1; t_1/2β, 9.46 ± 2.86 h; AUC 67.57 ± 13.07 h μg mL^?1. The absolute bioavailability was 87.37 ± 5.96%. The results showed that the diclofenac sodium injection had PK characteristics of rapid absorption and slow elimination, and high peak concentration and bioavailability in dairy cows, and that the recommended clinical dosage of diclofenac sodium injection is 2.2 mg kg^?1.     

Reversed–Phase Liquid Chromatographic Determination of Zaleplon in Human Plasma and its Pharmacokinetic Application

Abstract

A simple, rapid, specific, and reliable high performance liquid chromatographic assay of zaleplon in human plasma has been developed. Reversed‐phase chromatography was conducted using a mobile phase of methanol∶ammonium acetate buffer (50∶50) v/v, pH 3.2 adjusted with orthophosphoric acid, UV detection at 232 nm. After extraction from plasma by precipitation the drug was chromatographed using a C₁₈ reversed‐phase analytical column. The average recoveries of zaleplon from spiked plasma in the concentration range from 0.005–0.2 µg/ml were 93.29%, and their respective CV% was 2.557%. Regression analysis for the calibration plot for plasma standards obtained on three different days for the drug concentrations between 0.005–0.2 µg/ml indicated excellent linearity (r>0.999) and the coefficient of variation of the slopes of the three lines was less than 2%. The limit of detection was 5 ng/ml. Analysis of variance of the data showed no detectable difference in the slopes of the three standard plots (F=3.1, P>0.01). The high correlation coefficients and the similarities in the slopes are good indications of the excellent reproducibility and linearity of the proposed method. The proposed method was applied to study the bioequivalence of a commercial product of zaleplon, using as reference standard the innovator drug product. The study was conducted by using one capsule (1×10 mg) of each of the commercial product and the reference standard in a two‐way open randomized crossover design involving 24 volunteers. The criteria used to assess bioequivalence of the products were AUC (0?∞), C_max, t_max, t_1/2, and K. The obtained values for these parameters were 0.246±0.03 µg h/ml, 0.150±0.013 µg/ml, 1 h, 1.26±0.36 h, and 0.5928±0.1732 h^?1 for product A whereas, for product B they were 0.256±0.044 µgh/ml, 0.142±0.014 µg/ml, 1 h, 1.18±0.33 h, and 0.63±0.1747 h^?1, respectively.     

Determination of Belotecan in the Plasma,Bile, and Urine of Rats by High-Performance Liquid Chromatography with Fluorescence Detection and Its Application to a Pharmacokinetic Study

Abstract

A simple and reliable high-performance liquid chromatographic (HPLC) method was developed for the determination of belotecan in the plasma, urine, and bile samples of rats. Belotecan was analyzed with HPLC using a C18 column with fluorescence detector. A mixture of acetonitrile–0.1 M potassium phosphate buffer at pH 2.4 (25:75, v/v) and 0.2% trifluoroacetic acid was used as the mobile phase. The lower limits of quantitation (LOQ) were 5 ng mL^?1 for the plasma and 5 µg mL^?1 for the urine and bile samples. The method has been readily applied for the routine pharmacokinetic study of belotecan in small laboratory animals.     

A Spectrophotometric Study of Complexation Between Nickel(II) and 4-(5′-Methyl-3′-Isoxazolylazo)Resorcinol

Abstract

The complexation equilibria between Ni(II) and 4-(5′-methyl-3′-isoxazolylazo)resorcinol have been spec-trophotometrically studied in a 20% (v/v) ethanol-water medium at 0.1M NaCIO₄ ionic strength and species NiHR (log β₁₁₁ = 14.83 ± 0.05), NiR (log β₁₀₁ = 9.32 ± 0.04) and NiR₂ (log β₁₀₂ = 17.84 ± 0.05) are established.     

Estimation of Alprazolam and Sertraline in Pure Powder and Tablet Formulations by High-Performance Liquid Chromatography and High-Performance Thin-Layer Chromatography

Abstract

This article describes validated high-performance liquid chromatographic (HPLC) and high-performance thin-layer chromatographic (HPTLC) methods for simultaneous estimation of alprazolam (ALZ) and sertraline (SER) in pure powder and tablet formulation. The HPLC separation was achieved on a Nucleosil C18 column (150 mm long, 4.6 mm i.d., and 5-µm particle size) using acetonitrile and phosphate buffer (50 + 50 v/v), pH 5.5, as the mobile phase at a flow rate of 1.0 mL/min at ambient temperature. The HPTLC separation was achieved on an aluminum-backed layer of silica gel 60 F₂₅₄ using acetone/toluene/ammonia (6.0:3.0:1.0, v/v/v) as the mobile phase. Quantification with the HPLC method was achieved with ultraviolet (UV) detection at 230 nm over the concentration range 3–18 µg/mL for both drugs with mean recovery of 101.86 ± 0.21 and 100.57 ± 0.31% for ALZ and SER, respectively. Quantification in HPTLC was achieved with UV detection at 230 nm over the concentration range of 400–1400 ng/spot for both drugs with mean recoveries of 101.32 ± 0.15 and 100.38 ± 0.51% for ALZ and SER, respectively. These methods are rapid, simple, precise, sensitive, and are applicable for the simultaneous determination of ALZ and SER in pure powder and formulations.     

Comparison of Ion-Pairing and Reversed Phase Liquid Chromatography in Determination of Sulfamethoxazole and Trimethoprim

Abstract

Two simple, rapid, and sensitive HPLC methods have been developed for the simultaneous determination of sulfamethoxazole and trimethoprim in their pure and dosage forms, one utilizing reversed phase HPLC and the other ion-pair HPLC. In the reversed phase HPLC method (A) the mobile phase consists of 0.05% aqueous solution of formic acid with pH adjusted to 4.5±0.2 with triethylamine : acetonitrile:tetrahydrofuran 50 : 49 : 1 (v/v), and the mobile phase pumped at flow rate of 1.0 ml min^?1. An Appolo LC18 column (5.0 µm), 250 mm length × 4.6 mm diameter, was utilized as the stationary phase. Detection was affected spectrophotometrically at 254 nm. In the ion-pair HPLC method (B) the mobile phase consisted of methanol : buffer 35 : 65 (v/v) with the buffer composed of potassium dihydrogen phosphate 0.3 M and sodium heptan sulfonic acid 5.0 mM. To 500 ml of buffer was added 2.0 ml triethylamine, and then the pH was adjusted to 5.0 with phosphoric acid, and the mobile phase was pumped at a flow rate of 1.2 ml min^?1. A Hypersil C₁₈ column (5.0 µm), 150 mm length × 4.6 mm diameter, was utilized as the stationary phase. Detection was affected spectrophotometrically at 254 nm. Linearity ranges for sulfamethoxazole and trimethoprim were 1.0–110 and 1.5–98 µg ml^?1, respectively, with method A and 0.5–100 and 1.0–125 µg ml^?1, respectively, with method (B). Minimum detection limits obtained were 0.1969 and 0.3451 µg ml^?1 for sulfamethoxazole and trimethoprim, respectively, with method A, and 0.1377 and 0.2454 µg ml^?1 with method (B). The proposed methods were further applied to the analysis of tablets containing the two drugs, and the results were satisfied.     

Rapid High Performance Liquid Chromatographic Determination of Ampicillin in Human Urine

Abstract

A rapid, sensitive and specific HPLC assay for the determination of ampicillin in human urine is developed.

Ampicillin was directly measured in human urine at 225 nm using a reversed phase column (Synchropack RP-P) and a mobile phase composed of (1:9 methanol-sodium acetate solution, 0.01 M, pH 4). The analysis required no longer than 10 min. Linear correlation between the peak height ratio of ampicillin to cefoxitin sodium (internal standard) and ampicillin concentration in urine over the range 10–100 μg ml^?1 was obtained. The developed method proved to be advantageous as it monitors ampicillin level in urine. Moreover, the urinary excretion of ampicillin in human subjects after an oral administration of 500 mg ampicillin capsules was established using the proposed method.