Calcium Phosphate Coating on Titanium Plate

Abstract

Calcium phosphate films, obtained by electrophoresis and sputtering were studied by ESCA, IR and x-ray diffraction.     

ESCA STUDIES OF A DIPHOSPHENE

Abstract

The nature of the P[dbnd]P bond in E-bis(2,4,6-tri-tert-butylphenyl)diphosphene was studied by means of ESCA, indicating that the phosphorus 2p binding energy is the lowest among those for common organophosphorus compounds.     

ESCA applied to polymers. XXVI. Investigation of a series of aliphatic,aromatic, and fluorine-containing polycarbonates

The absolute and relative binding energies for the C_1s, O_1s, and F_1s core levels have been determined using x-ray photoelectron spectroscopy (ESCA) for a series of aliphatic, aromatic, and fluorine-containing polycarbonates. Comparisons of these experimentally determined, core-level binding energies with theoretical calculations using the ground-state potential model in the CNDO/2 SCF MO formalism as well as model compounds have been made on the C_1s and O_1s core levels. The degree of polymerization for low-molecular-weight fluorine-containing polycarbonates, as determined from ESCA measurements, is compared to measurements by vapor-phase osmometry and ¹⁹F-NMR.     

NMR Studies of the Interaction of Catechol and Ascorbic Acid with the Crown Ether

Abstract

Various crown ethers have been electropolymerized onto a platinum electrode for the determination of catechol and catecholamines by static potentiometry and potentiometric-flow injection analysis(FIA). The response mechanism of this modified electrode was investigated by scanning electron microscopy (SEM), electron dispersive X-ray analysis (EDAX), and electron spectroscopy for chemical analysis(ESCA). However, these studies were not conclusive with respect to possible mechanisms, and, therefore, nuclear magnetic resonance (NMR) studies were carried out on similar soluble crown ethers to determine the mode of interaction. As the crown ether resonances were shifted to higher fields by the added catechol in D₂O but not d₆-DMSO, it is postulated that the crown ether and catechol associate via interactions between hydrophobic surfaces. Hydrophilic ascorbic acid showed no NMR shifts which is consistent with its lack of potentiometric response. The EDAX and ESCA results indicated that there was also an interaction of catechol with the crown itself but the NMR shows that this interaction is a secondary effect in the overall electrode response.

     

Functionalization by Cold Plasmas of Polymer Model Surfaces (Hexatriacontane and Octadecyloctadecanoate) Studied by Contact Angle Measurements,XPS, and FTIR Spectroscopy

Abstract

Surface functionalization by argon or oxygen RF plasmas (13.56 MHz) of polymer model compounds, namely hexatriacontane (C₃₆H₇₄) and octadecyloctadecanoate [OOD, CH₃(CH₂)₁₆COO(CH₂)₁₇CH₃, was studied using contact angle measurements, XPS, and FTIR-ATR. In order to gain a better insight into the plasma-surface interaction mechanisms, the effects of the main plasma parameters (treatment time, power, pressure, and flow rate) on functionalization were investigated. It was shown that an argon plasma is more efficient than an oxygen plasma and that the ester-containing model compound incorporated less oxygen than the paraffinic one. After 10 seconds of treatment, contact angle measurements showed that none of these plasma parameters affect in any way the properties of the uppermost surface layer; these depend only on the nature of the sample and on the gas used in the plasma. On the other hand, ESCA, which allows a 70-Å in-depth probing, reveals the influence of the plasma parameters on both types of samples. IR, which probes to a much greater depth, evidences an evolution only for treated OOD samples. Interpretations are proposed for the effect of the plasma parameters on functionalization.     

ESCA-studies on activated silicagel surfaces preconcentrating heavy metal ions

Summary The theoretical ion-exchange capacity of an aminosilylated silicagel surface loaded with dithiocarbamate (DTC) groups was calculated by correlation of the results of a BET measurement, a quantitative determination of the concentration of reactive single hydroxyl groups on the surface, and ESCA intensities. ESCA spectra suggest many functional groups to be thiuram disulfide ones and not DTC ones as believed before. Quantitative ESCA measurements show that aminosilylated silicagel surfaces are only partially transformed to the DTC form. In spite of their chemical instability, the concentration of heavy metal ions (Pb²⁺) in aqueous solution and their ESCA intensities after immobilization on the activated silicagel surface are linearily correlated with each other in the ppm region.Professor Dr. Carl Mahr zum 80. Geburtstag in Dankbarkeit gewidmet.     

Composition Profiles of Dental Enamel Studied by X-Ray Photoelectron Spectroscopy (ESCA)

Abstract

The surfaces of both normal and fluoride treated human dental enamel were examined with x-ray photoelectron spectroscopy (ESCA). Using argon-ion etching to remove thin layers of enamel, subsurface layers were also analyzed. The resulting composition-depth profile showed that stannous fluoride produced a subsurface layer containing both tin and fluoride whereas fluorine was absent from the surface layer. Acid fluoride treatments, however, converted the surface to calcium fluoride which steadily decreased in concentration with depth.     

Anwenderbezogene ESCA-Oberfl?chenuntersuchungen in der industriellen Technik

Zusammenfassung Neben dem Einsatz der photoelektrnenspektroskopischen Oberflächenmessungen (ESCA) in der analytisch-chemischen und festkörperphysikalischen Forschung findet die Photoelektronenspektroskopie zunehmend für Oberflächenuntersuchungen im industriellen Bereich Anwendung.Die hohe Oberflächenempfindlichkeit macht die Meßmethode für Industriebereiche mit hohen Qualitätsansprüchen an Oberflächen von Komponenten sowie zur Entwicklung von schützenden Korrosionsschichten, Beschichtungen und Verbindungen (z.B. Schweißung, Lötung, Klebeverbindungen) besonders geeignet.Anhand von Beispielen mehrerer Untersuchungen wird gezeigt, wie ESCA-Messungen an metallischen Komponen ten zur Lösung von industriellen Fragestellungen beitragen können.

---

Application of ESCA surface examinations for industrial engineering

Summary Apart from the use of photoelectron spectroscopic surface measurements (ESCA) in analytical chemistry and physical solid state research, an increasing number of photoelectron spectroscopy measurements are performed in industry.The extreme surface sensitivity of this method qualifies it for the high requirements imposed on component surfaces and the development of protective corrosion layers, coatings and junctions (for example welding, soldering, sticking). Based on examples of several ESCA measurements, it is shown how to contribute to the solution of industrial questions.

     

Multitechnique surface spectroscopic studies of plasma modified polymers III. H2O and O2/H2O plasma modified poly(methyl methacrylate)s

The surfaces of poly(methyl methacrylate) (PMMA) films modified by O₂H₂O and H₂O radio-frequency glow discharge plasmas were studied using electron spectroscopy for chemical analysis (ESCA or XPS), low energy ion scattering (LEISS or ISS), Fourier transform IR spectroscopy (FTIR) with attenuated total reflectance (ATR) sampling, and critical surface energy from contact angle measurements. The extent and nature of modification with respect to promotion of a hydrophilic surface compared to the hydrophobic surface of the unmodified PMMA has been probed. Results show drastic decreases in C/O ratio at the near surface, which increases to that of the unmodified PMMA as deeper cross sections are analyzed. In addition peak fitting of ESCA data correlated with FTIR functional group information allows for the qualitative and quantitative analysis of the resulting bonding and structure of the modified layer. From these results combined with the polarity and surface energy differences obtained from contact angle measurements, the structural changes are discussed with respect to plasma reaction mechanisms and differences in the structure of the modified polymer films.     

Application of cross-correlation analysis to EXAFS: Investigation of the cobalt phase on boron modified cobalt/alumina catalysts

Boron modified Co/Al₂O₃ catalysts, previously characterized by ESCA, are examined by EXAFS. A method of data analysis based on cross-correlation of the (E) spectra is used to determine the relative amounts of Co₃O₄ and cobalt surface phase present on the catalysts. The results are compared with those obtained previously by ESCA. The EXAFS analysis agrees well with the ESCA results. No gas-phase reactions were required to elucidate the relative proportion of cobalt species by EXAFS as is necessary for the ESCA analysis.     

Characterization and application of supported metal catalysts with well-tailored pore systems and metal dispersions

Silica supported silver catalysts were prepared by sol-gel techniques and characterized by physisorption, in-situ ESCA measurements and transmission electron microscopy. Compared to conventional supported group VIII metal catalysts, these Ag/SiO₂ catalysts exhibited a superior performance for the selective hydrogenation of α,β-unsaturated aldehydes to allylic alcohols.     

Polypropylene/Cellulosic Fiber Composites Chemical Treatment of the Cellulose Assuming Compatibilization Between the Two Materials

Abstract

The present work deals with the realization of composites with a polypropylene (PP) matrix and cellulosic fibers as reinforcement. In order to achieve a good adhesion with the PP matrix, the modification of different cellulosic fibers has been performed with various chemical functions: carboxylic anhydrides, isocyanates, vinylsulfone, and chlorotriazine systems. All these compatibilizing agents carry an alkyl chain or a PP chain. Grafting is evidenced by infrared and ESCA spectroscopies, and the grafting rates for the different chemicals are determined by microweighing measurements. Modification of the surface characteristics is followed by wettability tests and inverse gas chromatography. Determination of the water sorption isotherm for the treated fibers shows an important decrease in water regain in the case of isocyanate treatments in swelling medium. Enhancement of adhesion between fibers and the matrix is demonstrated by mechanical tests: the interfacial shear stress obtained by the microbond test increases by 70% for cellulosic fibers treated with maleated PP. This may be the result of entanglements between PP chains, but for macrocomposites the effect is much more limited due to the predominance of external factors during development of the composite.     

Surface characterization of unbleached kraft pulps by means of ESCA

The effect of digestion conditions (amount of effective alkali, digestion time) on the surface compositions of unbleached softwood (Pinus sylvestris) kraft pulp has been investigated by electron spectroscopy for chemical analysis (ESCA). The quantities monitored were the angular dependence of the total O/C ratio, the relative amounts of carbons in different states of oxidation and the adsorption of Al and Ca ions to the carboxyl groups in the surface. Examination of the angular dependence of ESCA intensities shows that the concentration of alkyl carbon is high in a very thin surface layer and that it decreases linearly with decreasing kappa number. The concentration of alkyl carbon is decreased by extraction of the fibres with dichloromethane, but the amount remaining in the surface after extraction still decreases linearly with decreasing kappa number (i.e. it decreases with increasing digestion time). It is suggested that the observed enrichment of alkyl carbon in the outermost surface layers most probably is due to reprecipitation of lignin. In pulp that has not been extracted, there is also strong enrichment of extractives in the surface. This amount increases with increasing effective alkali but is relatively independent of digestion time. ESCA analysis of the Al and Ca bound to the carboxyl groups shows that the amount depends on digestion time; the results are consistent with the notion that the reprecipitated lignin contains carboxyl groups.     

ESCA: Eine Methode zur Bestimmung von Elementen und ihren Bindungszust?nden in der Oberfl?che von Festk?rpern

Zusammenfassung ESCA (nach Siegbahn: Electron Spectroscopy for Chemical Analysis) beruht auf dem Photoeffekt an inneren Atomorbitalen und ist auf alle Substanzen anwendbar. Die Routineuntersuchungen werden überwiegend an Festkörpern durchgeführt. Informationsträger sind Photo- und Augerelektronen, die verlustfrei von der Festkörperoberfläche emittiert werden. Auf Grund der Oberflächenempfindlichkeit gehört ESCA zu den mikrochemischen Verfahren. Die erfaßte Schichtdicke ist gegeben durch die Austrittstiefe der Photo- und Augerelektronen. Sie beträgt einige Monolagen, maximal 100 Å. Man kann davon ausgehen, daß bei einer untersuchten Fläche von 0,5 cm² und homogener Verteilung eines Elementes in den obersten 100 Å eine Konzentration von 1 % noch sicher nachgewiesen wird. Die Empfindlichkeitsunterschiede von Element zu Element liegen innerhalb eines Faktors 10. Matrixeffekte sind noch wesentlich geringer. Deshalb sind gute Voraussetzungen für eine quantitative Analyse gegeben. ESCA ist zwar nicht direkt ein Verfahren zur Spurenanalyse, wohl aber nach geeigneter Anreicherung. Der besondere Vorteil von ESCA liegt darin, daß man nicht nur Elemente nachweist, sondern an Hand von chemischen Verschiebungen, Linienaufspaltungen und Shake-up-Satelliten zuverlässige Aussagen über ihren Bindungszustand erhält. Weiterhin kann innerhalb des Bereiches der Austrittstiefe der Photoelektronen differenziert werden; dadurch ergeben sich Möglichkeiten zur zerstörungsfreien Aufnahme von Tiefenverteilungen von Elementen und Verbindungen. Zum Vordringen in tiefere Schichten kann ESCA mit abbauenden Verfahren gekoppelt werden. Nach Ionenbeschußabbau ist wegen ioneninduzierter Reaktionen in der Regel jedoch kein Verbindungsnachweis mehr möglich.

---

ESCA: A method for the determination of elements and their valence states in the surfaces of solids

Summary ESCA — or Electron Spectroscopy for Chemical Analysis (the term used by its inventor, Siegbahn)-is based on the effects of X-rays on the inner orbitals of atoms and is applicable to all substances. Routine ESCA investigations are carried out chiefly on solids. The information is provided by photo- and Auger electrons, which are emitted from the surfaces of solids without energy losses. Because of its surface sensitivity ESCA may be regarded as a microchemical method. The comprehended layer thickness is given by the escape depths of the photo- and Auger electrons. The range is from a few monolayers to 100 Å. As a rule, an element that is distributed homogeneously in the uppermost 100 Å of an area of 0.5 cm² can still be detected reliably at a concentration of 1%. The differences in sensitivity from element to element are within a factor of ten. Matrix effects are considerably smaller still. ESCA is therefore well suited for quantitative analysis. Though not directly suitable for trace analysis, ESCA can be used for that purpose after appropriate enrichment techniques have been applied. The special advantage of ESCA is that, in addition to detecting elements, it provides reliable information on their valence states by means of chemical shifts, line splitting and shake-up satellites. Apart from this, ESCA permits in-depth discrimination within the range of the escape depths of the photo electrons; it therefore provides opportunities for the non-destructive recording of the depth distributions of elements and compounds. For investigation of lower layers, ESCA can be combined with methods which involve the removal of outer layers. After removal of layers by ion bombardment, however, ion-induced reactions generally prevent the detection of compounds.

Hauptvortrag auf dem Internationalen Symposium für mikrochemische Arbeitsmethoden (ISM) Davos, Mai 1977     

A NON-EMPIRICAL LCAO MO SCF INVESTIGATION OF SOME ASPECTS OF STRUCTURE AND BONDING IN THE THIATHIOPHTHEN RING SYSTEM

Abstract

Non-empirical LCAO MO SCF calculations have been performed on prototype symmetrical and unsymmetrical thiathiophthen ring systems to investigate structure and bonding as a function of change in geometry. Substituent effects have been investigated and it is shown that within the theoretical limitations the energy differences between symmetrical and unsymmetrical structures are quite small. Comparison has been made with UPS and ESCA data pertaining to valence and core levels respectively and some consideration given to the thiathiophthen radical anion and dianion ring systems.     

ESCA OF TETRAAZA MACROCYCLIC COMPLEXES OF SILVER(II)

Abstract

ESCA results for four tetraaza macrocyclic ligands and their silver(II) complexes have been measured. The Ag 3d binding energies of these complexes fall in the narrow range of 374.3–375.3 eV (3d_3/2) and 368.2–375.3 eV (3d_3/2) and 368.2–369.3 eV (3d_5/2) which are in agreement with the E_b values published previously for silver(II) complexes containing nitrogen donor ligands. Ring substitution with methyl groups has no pronounced influence on the Ag 3d, binding energies while ring size variation does cause a small shift in the binding energies. Ring strain energy is invoked as the probable reason for the observed effect.     

Untersuchungen an katalytisch aktiven Oberflächenverbindungen. XIII. Struktur und katalytische Eigenschaften von Molybdän-oxid/SiO2-Katalysatoren

Studies on Catalytically Active Surface Compounds. XIII. Structure and Catalytic Properties of Molybdenum Oxide/SiO₂ Catalysts The catalytic properties of Mo oxide/SiO₂ catalysts in the selective oxidation of methanol to formaldehyde are described. It is shown that, independently on the preparation conditions, all catalysts showed relative high activity and selectivity values which were however, not constant during the reaction time. The high initial activity could be stabilized to a limited extent both by prereduction with methanol (but not with hydrogen) and by decreasing the oxygen concentration of the reaction gas. ESR measurements showed that in dependence on the means of reduction (methanol or hydrogen) two different coordinated Mo⁵⁺ ions were formed. Evidence was given by IR spectroscopy that prereduction in methanol caused the formation of methoxy groups stabilizing catalytically active Mo⁵⁺ ions. UV-Vis, ESCA, and electron microscopic measurements showed however, that further aggregation and formation of microcrystallites of MoO₃ took place during the catalytic reaction which caused the observed decrease of the activity.     

SEMIEMPIRICAL CALCULATION OF THE INNER SHELL BINDING ENERGY SHIFTS IN MOLECULES INVOLVING SULPHUR ATOM

Abstract

The inner core binding energy shifts of sulphur atom in various chemical environments were studied by the semiempirical self-consistent charge molecular orbital method. The relaxation energy was taken into account by using two distinct approaches:(a) reorganizatinoo potential method and (b) transition potential method. The changes in ESCA chemical shifts of sulphur are satisfactorily accounted for by the latter method, the s tandard deviation from the experimental data being 0.2 eV. It appears that the reorganization energy plays an important role in rationlizing inner core binding energy shifts of sulphur.     

Applications of ESCA to polymer chemistry. X. Core and valence energy levels of a series of polyacrylates

The core and valence levels of a series of poly(alkyl acrylates) have been studied by ESCA. From an analysis of the individual component peaks for the C_1s and O_1s core levels and from comparison of relative area ratios it is shown that ESCA may be applied to the study of surface compositions. The evidence presented strongly suggests that on the ESCA depth-profiling scale the technique statistically sample the repeat units with no evidence for preferential orientation of side chains at the surface. For some samples, ESCA provides evidence for a degree of surface oxidation and hydrocarbon contamination. The valence energy levels are shown to be characteristic of the polymer system. The measured absolute and relative binding energies of the core levels have been compared with model calculations using the charge-potential model in the CNDO/2 SCF MO formalism.     

5-phenyl-1,2,3,4-thiatriazole-3-oxide: A new class of heteroaromatic N-oxides

Oxidation of 5-phenyl-1,2,3,4-thiatriazole (1) with peroxytrifluoroacetic acid yields 5-phenyl-1,2,3,4-thiatriazole-3-oxide (2) a representative of a new class of heteroaromatic N-oxides. The structure is based on the mass spectral fragmentation of 2 and the isotope labelled with ¹⁵N at position 2. IR and ESCA measurements are consistent with this assignment. The thermal, photochemical, and chemical properties of the oxide are discussed.