Reversible electrochemical oxidation of (CH)x films

Thallium(I)-selective PVC membrane electrodes based on bis(crown ether)s containing benzo-15-crown-5 moiety were prepared, using o-nitrophenyloctylether(NPOE) or dipentylphthalate(DPP) as the plasticizer of the PVC membrane. Selectivity coefficients for various alkali and alkaline earth metal ions, k_TIM, were sufficiently small, and were compared with those of the corresponding monocyclic analog and valinomycin. These electrodes show excellent electrode properties, and the electrode response was stable in a wide pH range.     

The synthesis of bis(benzo-crown ether)s and their incorporation into potassium-selective PVC membrane electrodes

Five bis(benzo-15-crown-5) derivatives connected with different bridge chains were synthesized as neutral carriers in K⁺-selective electrodes. Potassium ion-selective PVC membrane electrodes based on these bis(crown ether)s were prepared using dibutyl phthalate (DBP) and dioctyl phthalate (DOP) as plasticizers of the PVC membrane. The selectivity coefficients (K _M ⁿ⁺:K _K+) for various alkali and alkaline-earth metal ions were measured. The electrodes based on the bis(crown ether)s are more selective for K⁺ than those based on monomeric crown ethers. The selectivity of one of the prepared potassium selective electrodes was higher than that of the electrode based on valinomycin and three of them were stable over a wide pH range.     

A comparative study of the effect of o-nitrophenyl octyl ether and o-nitrophenyl pentyl ether as plasticizers on the response and selectivity of carrier-based liquid membrane ion-selective electrodes

Lithium, potassium and caesium-selective microelectrodes were prepared by coating the tips of preconditioned silver wires, incorporated in a flow-cell, with PVC membranes containing four different ionophores. A dicarboxamide, a 14-crown-4 carboxylic acid, benzo-18-crown-6 and di-(tert-butylbenzo)-21-crown-7 ionophores were used in the electrode matrix. The first two ionophores were used in lithium ion-selective electrodes, the third in a potassium ion electrode and the fourth in a caesium ion electrode. Two different plasticizers, o-nitrophenyl octyl ether (NPOE) and o-nitrophenyl pentyl ether (NPP'E) were used. Enhancement of the signal and the slope of the calibration curve and improvement of the curve linearity were observed in all cases when NPP'E was used as plasticizer. A general trend of enhanced selectivity of the electrodes incorporating crown ether ionophores was also observed when NPP'E was the plasticizer.     

Bis(Benzo-18-crown-6) Derivatives: Synthesis and Ion-Sensing Properties in Plasticized PVC Membranes

Several mono-and bis(benzo-18-crown-6) ethers comprising o-nitrophenyl urethanemoieties were synthesized and studied as ionophores in PVC membrane electrodes. Thebis(crown ether)s were found to exhibit good potentiometric Cs⁺ selectivity overmono and divalent cations as compared to the respective mono(crown ether)s.     

Effect of Plasticizer on the Performance of the Surfactant-Selective Electrode Based on a Poly(Vinyl Chloride) Membrane with no Added Ion-Exchanger

The effect of different plasticizers in the sensing membrane on the performance of a surfactant ISE based on a PVC membrane with no added ion-exchanger was investigated. o-nitrophenyl octyl ether (NPOE), o-nitrophenyl decyl ether (NPDE), o-nitrophenyl dodecyl ether (NPDOE) and o-nitrophenyl tetradecyl ether (NPTE) were used as plasticizers. Electrodes based on NPDE, NPDOE and NPTE produced better results than NPOE-plasticized PVC membrane electrodes in terms of low detection limits. Electrodes based on NPDE, NPDOE and NPTE displayed a Nernstian slope in the concentration range of 10^–6 to 10^–2M. NPOE-plasticized PVC membrane electrodes displayed a Nernstian slope in the concentration range of 10^–5 to 10^–2M. The three electrodes other than the NPOE-plasticized PVC membrane electrode showed a similar performance to that of the NPOE-plasticized PVC membrane electrode concerning low detection limits and slope sensitivity. The four electrodes examined in this study are excellently selective for the dodecyltrimethylammonium ion over inorganic anions, but interference from other cationic surfactants such as tetradecyltrimethylammonium ions is significant. With respect to slope sensitivity, selectivity, response time and pH effect, the four electrodes showed a similar performance.     

The synthesis of bis(benzo-15-crown-5) derivatives and their use in potassium-PVC membrane electrodes

Five new bis(benzo-15-crown-5) derivatives with different connecting groups were synthesized. Potassium ion-selective PVC membrane electrodes based on these bis(crown ether)s were prepared and their selective properties were measured. The results showed that most of these electrodes are stable over a wide pH range and their selectivity coefficients were better than those of an electrode based on natural valinomycin.     

A Novel Potentiometric Sensor for Thiocyanate Based on an Amide‐Linked Manganese Diporphyrin Xanthene

The synthesis of a new compound, amide‐linked manganese diporphyrin xanthene (Mn₂Cl₂ADPX), and its application for preparation of thiocyanate selective electrodes was described. The electrode was prepared with a PVC membrane combining Mn₂Cl₂ADPX as an electro active material, 2‐nitrophenyl octyl ether (o‐NPOE) as a plasticizer in the percentage ratio of 3 : 65 : 32 (Mn₂Cl₂ADPX: o‐NPOE: PVC, w : w : w). The electrode exhibited linear response within the concentration range of 2.4×10^?6 to 1.0×10^?1 M SCN^?, with a working pH range from 3.0 to 8.0 and a fast response time of less than 60 s. Several electroactive materials and solvent mediators have been compared and the experimental conditions were optimized. The Mn₂Cl₂ADPX based electrode shows obviously better response characteristics than that of monoporphyrin manganese in terms of working concentration range and slope. Selectivity coefficients for SCN^? relative to a number of interfering ions were investigated. The electrode exhibits anti‐Hofmeister selectivity toward SCN^? with respect to common coexisting anions. The electrode was applied to the determination of SCN^? in body urine with satisfactory results.     

含嘧啶环的双冠醚 V.双冠醚为载体的碱金属离子选择性电极的研究

本文报道由５－硝基－６－三氟甲基嘧啶环桥联苯并－１２－冠－４、苯并－１５－冠－５和苯并－１８－冠－６的三种新的双冠醚的合成。用它们作为载体分别制成钠、钾和铯离子选择性电极，测定了电极的响应功能、选择性系数和适用的ｐＨ范围。结果表明三种电极都有较好的性能。     

Cationic Surfactant Ion-Selective PVC Membrane Electrode Containing Macrocyclic Diimine Crown Ether

ABSTRACT

DP⁺ ion-selective PVC membrane electrode based on 2,3,11,12-dibenzo-5,9-diaza-4,9(10)-cis-diimino-1,13-dioxacyclopentadecane as a novel macrocyclic diimine crown ether is proposed. o-Nitrophenyl octyl ether as plasticizer and potassium tetrakis(4-chlorophenyl)borate as lipophilic salt were used. The electrode exhibits a Nernstian response for 1.0 x 10^?2-1.0 x 10^?6 mol 1^?1 DPCl with a slope of 58 mVdecade^?1. The detection limit is 2.5 x 10^?7 mol 1^?1. The electrode response was stable over a wide pH range (3-11). The lifetime of the electrode was about 2 months. The electrode shows a high selectivity towards inorganic cations. Among the organic cations tested, only hexadecyltrimethylammonium ion interferes. The electrode was suitable for determining the critical micelle concentration and as an end-point detector in the potentiometric titration of the cationic surfactants.     

Caesium-selective PVC membrane electrodes based on bis(crown ether)s

Caesium-selective PVC membrane electrodes based on bis(crown ether)s containing benzo-18-crown-6 moieties were prepared using two kinds of plasticizers. Selectivity coefficients for various interfering monovalent ions were determined by the mixed solution method, and were found to relfect the complexing property and extractability of the bis-(benzo-18-crown-6)s. The electrochemical selectivity was also compared with that of the corresponding monocyclic analog and valinomycin.     

Zn(II)‐Selective Membrane Electrode Based on Tetraazamacrocycle [Bzo2Me2Ph2(16)hexaeneN4]

A PVC membrane electrode using [Bzo₂Me₂Ph₂(16)hexaeneN₄] ( I ) as ionophore, oleic acid as lipophilic additive and o‐nitrophenyloctyl ether as plasticizer has been investigated as Zn(II)‐selective electrode. The membrane incorporating 34.9% (w/w) PVC, 2.3% I , 4.7% OA and 58.1% o‐NPOE gave linear response over the concentration range 2.82×10^?6?1.0×10^?1 M with a Nernstian slope of 28.5±0.2 mV/decade of concentration with a detection limit of 2.24×10^?6 M (0.146 ppm) and showed a response time of less than 10 s and could be used in pH range 2.5–8.5. High selectivity was obtained over a wide variety of metal ions. The proposed electrode was successfully used as an indicator electrode in potentiometric titration of zinc ions with EDTA and for determination of zinc in real samples.     

4'-picrylamino-5'-nitrobenzo-18-crown-6 as a sensing reagent in potassium ion-selective electrode membranes

Five crown ethers, namely, 4'-picrylamino-5'-nitrobenzo-18-crown-6 (I), dibenzo-18-crown-6 (III), dibenzo-30-crown-10 (IV), dicyclohexano-18-crown-6 (V) and bis-[(benzo-15-crown-5)-15-ylmethyl pimelate] (VI) have been compared with valinomycin (II) for their role as potassium ion-sensors in PVC matrix membrane ion-selective electrodes (ISEs). Sensor I was found to be the best, but fell short of the high quality of the well established sensor II (valinomycin) in terms of selectivity towards potassium over sodium and ammonium. Nevertheless, electrodes made from membranes containing sensor I, 2-nitrophenyl octyl ether (NPOE) or 2-nitrophenyl phenyl ether and potassium tetra-p-chloro-phenylborate (anion excluder) in PVC were of long lifetimes. The loss of slope of the ISEs is linked to small falls in the electrical resistance of the ISE membranes; this being associated with leaching of sensor and solvent mediator from the membranes into test or storage solutions. No chromatographic evidence was found of anion excluder being leached.     

Potentiometric Cr(VI) selective electrode based on novel ionophore-immobilized PVC membranes

For the determination of Cr(VI) concentrations with a potentiometric ion-selective electrode (ISE), ionophore-immobilized membranes were prepared by ultraviolet (UV)-induced graft polymerization followed by chemical treatment. Novel ionophores comprising various amine structures were immobilized onto poly(vinyl chloride) (PVC) matrixes, and these were examined to determine Cr(VI) selectively. Of the three ionophores examined in this study, the membranes with N,N,N,N-tetrakis(3-aminopropyl)-1,4-butanediamine (DABAm4) exhibited the highest Cr(VI) ion selectivity in both extraction and potentiometry experiments. The plasticizer in the membrane was optimized as 1.0 ml o-nitrophenyl octyl ether (NPOE)/g PVC to form diffusible channels. The potentiometric studies revealed that the performance of DABAm4-immobilized PVC was equivalent to that of mobile ionophores in supported liquid membranes (SLMs). A reproducible response of Cr(VI) was attained within a response time of 1 s in the range of 2.16 × 10⁻⁶ to 0.1 M, using the membrane prepared in this study. The selectivity for the Cr(VI) ion against the other interfering ions was compared reasonably between a solvent extraction and potentiometry. The long-term response of the Cr(VI) ISE showed slight deterioration over a continuous operation for 6 months, while the detection limit slightly decreased due to the leaching-out of the plasticizer. The ISE along with the DABAm4 immobilized membrane showed a higher Cr(VI) ion selectivity and more stable response under long-term usage than ISEs with typical SLMs.     

Novel Plastic Chromium(III)‐Ion Selective Electrodes Based on Different Ionophoric Species and Plasticizing Solvent Mediators

Different ionophoric species, viz.: 18‐crown‐6 (18C6), dibenzo‐18‐crown‐6 (DB18C6) and calix[6]arene (CAX), as electroactive materials, with 2‐nitrophenyloctylether (2‐NPOE), bis(ethylhexyl)sebacate (DOS), dioctyl phthalate (DOP), and didecyl phthalate (DDP) as plasticizing solvent mediators were used to construct Cr³⁺ selective electrodes in a PVC matrix in the ratio (w/w) PVC: ionophore: plasticizer (60 : 2 : 120). Seven electrodes out of the fabricated 12 electrodes, gave best results in terms of working concentration range (1.0×10^?5?1.0×10^?1 M) with a close to Nernstian slope of 18.5 and a Nernstian slope of 20.0 mV/decade of activity. The usable pH range of the sensors is 4.0–7.0. The detection limit of the selected electrodes is ≤1.0×10^?7 M. The response time of the sensors is 8–35 s, depending on the concentration of Cr³⁺ used. The selectivity coefficient values indicate that the electrodes are highly selective for Cr³⁺ over a number of other cations except Pb²⁺ and Na⁺ (for some electrodes). The electrodes have successfully been used to determine Cr³⁺ in certified and real alloys and in effluents of electroplating shops with a precision as relative standard deviation (RSD)<3%, for each of the proposed Cr³⁺‐ion selective electrodes. The results obtained by the proposed ISEs are in good agreement with the results obtained by direct flame AAS method.     

Schiff碱型和仲胺型双冠醚II: 用双冠醚作载体的PVC膜钾离子选择性电极

用六个含二个苯并-15-冠-5单元的席夫碱型和仲胺型新型双冠醚作载体制备了钾离子选择性PVC膜电极,并研究了它们的电极行为,这些电极对所有的其它碱金属和碱土金属离子展现出显著的钾离子选择性,可期望有一定的应用价值.     

Crown Ethers Bearing 18C6 Unit; Sensory Molecules for Fabricating PVC Membrane Lead Ion‐selective Electrodes

Crown ethers bearing 18C6 unit 18‐crown‐6 (18C6), dicyclohexyl18‐crown‐6 (DC18C6) and dibenzo18‐crown‐6 (DB18C6) have been examined as ion sensing materials for fabricating lead ion‐selective potentiometric sensors. Best performance of the electrode based upon 18C6 ionophore was achieved by using a membrane including 9% ionophore, 30% polyvinyl chloride (PVC), 2% oleic acid and 59% dibutylphthalate (DBP). The optimum composition for the sensors based on DC18C6 and DB18C6 was provided by the compositions: 9% DC18C6, 30% PVC, 1.5% sodium tetraphenyl borate (NaTBP), 59.5% DBP; and 5.9% DB18C6, 29.7% PVC, 2.5% NaTBP and 61.9% DBP, respectively. The linear response range of the electrode based on 18C6 (1 × 10^‐6‐1 × 10^‐3 M) differs from that presented by the DC18C6‐ and DB18C6‐based electrodes (1 × 10^‐5‐1 × 10^‐2 M). All the sensors were shown rapid response time (<12 s). The detection limit of the electrodes varies as 5.6 × 10^‐7, 6.3 × 10^‐6 and 7.1 × 10^‐6 M, for 18C6‐, DC18C6‐ and DB18C6‐based electrodes, respectively. The selectivity of the electrodes towards lead ions over some mono‐, di‐ and trivalent metal ions was evaluated. The lifetime of the electrode based on DC18C6 or DB18C6 ionophores was found to be more than three months, while it was shorter for 18C6‐based electrode. The application of the electrodes in aqueous samples was assessed.     

Potassium-selective PVC membrane electrodes based on bis- and poly(crown ether)s

Potassium-selective PVC membrane electrodes based on bis- and poly (crown ether)s containing benzo-15-crown-5 moiety as neutral carrier were prepared and selectivity coefficients for various monovalent ions were measured in order to elucidate the effect of complexing property of these crown ether derivatives on the electrode response. In the preference for potassium over sodium of the electrodes, these bis- and poly (crown ether)s were found to exceed the corresponding monocyclic crown ether considerably, which reflects the easy complexation of stable 2:1 complexes of crown ether ring and ion, derived from the cooperative effect of two adjacent crown ether rings.     

Phosphoryl Containing Podands as Carriers in Plasticized Membrane Electrodes Selective to Quaternary Ammonium Surfactants

Open chain polyethers with phosphoryl-containing terminal groups have been studied as carriers in plasticized membrane electrodes that are selective towards cationic surfactants. Host–guest complexation has also been studied by means of batch extraction and bulk membrane transport experiments. For the various guests, the bulk membrane (chloroform) transport rate decreases in the series tetraalkyl ammonium > alkyl pyridinium > alkyl ammonium, while the series of solvent extraction efficiency is exactly opposite; an explanation for this behaviour is proposed. The performance of electrode membranes follows the series for bulk membrane transport. Among the ISE membranes of various composition, one containing the longest (seven oxygen atoms) podand, o-nitrophenyl octyl ether (plasticizer), and sodium tetraphenyl borate (anionic additive) performs the best. The slope of the electrode function equals 58.5 mV/decade, the detection limit for dodecyltrimethylammonium is 3.2 × 10^-6 M. ISE response time is 5–10 s, the working pH range is 2–11 and lifetime is at least 6 months. The electrode selectivity is significantly better than that of conventional ion-association and crown ether based electrodes.     

Novel Cesium‐Selective Electrodes Based on Lipophilic 1,3‐Bisbridged Cofacial‐calix[6]crowns

Five bisbridged calix[6]crowns have been investigated as Cs⁺ ionophore in PVC membrane electrodes. As ionophores, three 1,3‐bisbridged calix[6]crown‐4‐ethers( I–III ), 1,3‐bisbridged calix[6]crown‐5‐ether( IV ), and 1,3‐bisbridged calix[6]crown‐6‐ether( V ) have been evaluated. The membranes all give good Nernstian response in the concentration range from 1×10^?7 to 1×10^?1 M of cesium ion. The best detection limits (?log aequation/tex2gif-inf-1.gif=7.08–7.36) are obtained for electrode membranes containing 1,3‐bisbridged cofacial‐calix[6]crown‐4‐ethers( I‐III ), and the values are the lowest compared with those reported previously. The highest selectivity coefficients [ 3.74(Cs/K), 2.63(Cs/Rb)] are obtained for the membrane of 1,3‐bisbridged calix[6]crown‐4‐ether( II ), and these values are also the highest compared with previous reports for Cs⁺‐ISEs. The highest selectivity towards cesium ion is attributed to the geometrically cofacial positions of two crown‐ethers in calix[6]crowns in order to provide the complex of cesium ion and eight oxygens of cofacial crowns.     

Cation selectivity of 13-crown-4 and bis(13-crown-4) derivatives

The cation selectivity of liquid-membrane electrodes based on 18 derivatives of 13- crown-4 and bis(13-crown-4) is reported. When these compounds are dissolved in 1,2-dichlorobenzene, the electrodes exhibit MgCl⁺ selectivity which depends on the nature of the bonds connecting the crown ether rings.