Analysis of Metal Ions in Environmental Samples - III Synergistic Determination of Vanadium (V) As its Mixed Complex with N-0-Methoxyphenyl-2-Thenohydroxamic Acid and 3-(0-Carboxyphenyl)-1-Phenyltriazine-N-0Xide

Abstract

A highly sensitive, selective, and rapid method for the spectrophotometry determination of vanadium(V) at trace levels is described. The method is based on the selective extraction of vanadium(v) from strongly acidic (3–6 M hydrochloric acid) met ium with solution of N-0-methoxyphenyl-2- thenohydroxamic acid (0MTHA) in chloroform. The extract is then equilibrated with 3-(0-carboxyohenyl)-1-phenyltriazine-N-oxide(CPPTNO) at pH ? 1.5 and the resulting colour is measured at 445 nm. The colour system obeys Beer's law over the range 0–20 -μg/ml of vanadium; the molar absorptivityat the wavelength of maximum absorption (445 nm), and the Sandell sensitivity of the method are 1.1 × 10⁴1. mole^?1 cm^?1 and 0.005 μg/ml respectively.     

Colorimetric Determination of Propofol in Bulk form,Dosage Form and Biological Fluids

ABSTRACT

Propofol is coupled with 2, 6-dichloroquinone-4-chlorimide (DCQ) in a reaction buffered at pH 9.6 to give a colored product having an analytically useful maximum at 635 nm. The factors affecting the color generation were optimized and incorporated in the procedure. The reacted propofol has a molar absorptivity of 3.9 × 10^?4 L mol^?1 cm^?1, and Beer's law is obeyed for concentrations 1-5 μg ml^?1 with detection limit 0.25 μg ml^?1. The method was found applicable to biological fluids (plasma and urine) spiked with propofol at concentration levels 1-5 μg ml^?1 for plasma and 1-5 μg 0.5 ml^?1 urine (less sensitivity is obtained with urine volumes above 0.5 ml) with detection limits 0.28 μg ml^?1 for plasma and 0.4 μg 0.5 ml^?1 urine. The average recovery for the commercial preparation (1% w/v propofol emulsion intravenous injection for infusion) was 99.54% with an RSD of 1.05%. The method was validated by an adopted HPLC method. The results obtained by the HPLC method for the commercial preparation were statistically compared with the proposed method and evaluated at the 95% confidence limits.     

Extractive Spectrqphotometric Determination of Vanadium Liith o-Aminobenzo-Hydroxamic Acid

Abstract

A new spectrophotometric method for vanadium determination is proposed. The method is based on the extraction in Adogen-toluene solution of the complex formed between V(V) and o-Aminobenzohydraxámic acid

The method allows determination of 50 to 110 μg of V(V). The error and the apparent molar absorptivity are 1.2% and 5.2 ± 10³ l.mol^?1. cm^?1 respectively. The interferences caused by foreign ions have been established. The method is applied with success to determination of vanadium in petroleum crudes.     

Spectrophotometric determination of vanadium using variamine blue and its application to synthetic, environmental and biological samples

A simple, rapid and accurate spectrophotometric method is described for the determination of trace amounts of vanadium using variamine blue (VB) as a chromogenic reagent. The method is based on the oxidation of variamine blue to form a violetcolored species on reaction with vanadium(V), having an absorption maximum at 570 nm. Beer’s law is obeyed in the range of 0.1–2.0 μg ml^?1. The molar absorptivity and Sandell’s sensitivity were found to be 1.65 × 10⁴ l mol^?1 cm^?1 and 0.003 μg cm^?2, respectively. Optimum reaction conditions were evaluated in order to delimit the linear range. The effect of interfering ions on the determination is described. The proposed method has been successfully applied to the determination of vanadium in steel, pharmaceutical, environmental, and biological samples.     

Extract-Photometric Determination of Vanadium with Isophthaldihydroxamic Acid

Abstract

The spectrophotometric study of violet complex isophthaldihydroxamic acid-vanadium extracted into solution of trioctylmethylammonium chloride in ethylacetate was made (λ_max = 380 nm, ? = 7500 l.mol^?1.cm^?1; λ_max = 510 nm, ? = 5510 l.mol^?1 .cm^?1; stoichiometries, 1:1 and 1:2, V:reagent). A new method for the extract-spectrophotometric determination of V(V) in the range 14–80 μg of vanadium is proposed.     

Indirect Spectrophotometric Determination of Vanadium(IV) by Flow Injection Analysis Based on the Redox Reaction with Copper(II) in the Presence of Neocuproine

Abstract

An indirect photometric method with a continuous-flow analysis is presented for the determination of trace amounts of vanadium(IV). It is based on the redox reaction of copper(II) with vanadium(1V) in the presence of neocuproine. In the presence of neocuproine, copper(I1) is reduced easily by vanadium(I V) to a copper(1)-neocuproine complex, which shows a n absorption maximum at 454 nm. By measuring t h e absorbance of the complex at this wavelength, vanadium(1V) in t h e range 2×10^?6 - 8 × mol dm^?5 mol dm^?3 can be determined at a rate of 120 samples h^?1. The fractional determination of vanadium(1V) and iron(I1) is also studied.     

Extractive Determination of Vanadium in Fungi Samples

A new reagent system has been reported for the extractive separation and simultaneous spectrophotometric de termination of vanadium (V). The method is based on the formation of a water in soluble blue‐violet V(V) complex with N‐hydroxy‐N‐m‐tolyl‐N′‐phenylbenzamidine (HTPBA), and neutral surfactant Triton X‐100 into chloroform over an acidity range of 1.0–10.0 M acetic acid. The complex shows a broad absorption maximum at 570 nm, when measured against a chloroform blank. The λ_max (570 nm) of the complex and that of re agent (313 nm) are well separated, hence the excess of the reagent does not interfere in the spectrophotometric de termination of the metal. The molar absorptivity (?) of the complex is (4.74) × 10³ 1 mol^?1 cm^?1. The linearity of the calibration curve is followed between 0.5–12.0 μg mL^?1 with slope, intercept and correlation coefficient of 9.16× 10^?2, 4.5 × 10^?3 and 0.999, respectively. The detection limit of the method is 45 μgl^?1. The proposed re agent system provides significantly higher tolerance limit for iron (500 μg mL^?1) and also various metalions commonly associated with vanadium did not interfere. The method was applied for the deter mi nation of vanadium content of three samples i.e. Spirogyra, Puccinia and Riccia.     

N-p-tolyl-2-furohydroxamic Acid as the Extracting and Spectrophotometric Reagent for Vanadium(V)

Abstract

A simple and rapid spectrophotometric determination of vanadium(V) is described. The vanadium-N-p-tolyl-2-furohydroxamic acid complex is extracted into chloroform form 6–8 molar hydrochloric acid solution. Maximum absorbance occurs at 540 nm and Beer's Law is obeyed over the range of 0–15 μg of vanadium in the organic phase. The molar absorptivity is 3.0 × 10³ mole^?1 cm^?1 at 540 nm.

Vanadium could be determined in high purity niobium and tantalum metals, cast iron, steel, non ferrous alloys and silicates. Vanadium could be determined in the presence of several commonly occurring cations.     

Extraction Spectrophotometric Determination of Vanadium in Industrial Waste Water

A new and simple extraction spectrophotometric method for the determination of vanadium(V) with KIO₄, N‐phenylbenzohydroxamic acid (PBHA) and crystal violet (CV), in industrial waste water samples is described. It is based on the extraction of mixed‐ligand complex V(V)‐IO₄^? ‐PBHA‐CV⁺ into chloroform solution over 2‐7 MHC1. The molar absorptivity of the complex is (7.20) × 10³1 mol^?1 cm^?1 at λ_max 535 nm. The detection limit of the method is 44 μg 1^?1 V. The linearity of the calibration curve is followed up to 6 μgmL^?1 in the organic solution with slope, intercept and correlation coefficient of 1.34 × 10^?1, 6.7 × 10^?3 and +0.99, respectively. This method enhances the sensitivity of the conventional PBHA method for the determination of vanadium, and is free from interferences of other metal ions commonly associated with vanadium. The method has been successfully tested for the determination of V in the industrial waste water samples.     

Trace Analysis of Vanadium in Environment as its Ternary Complex with N-p Methoxyphenyl-2-Furylacrylohydroxamic Acid and 3-(o-Carboxyphenyl)-1-Phenyltriazine-N-Oxide

Abstract

A method is presented for the highly sensitive, selective, and rapid determination of vanadium (V) at sub-microgram levels in rocks, animal tissues, plant tissues and natural waters. The method is based on the selective extraction of vanadium (V) from strongly acidic (3-8 M hydrochloric acid) medium with solution of N-p-methoxyphenyl-2-furylacrylohydroxamic acid (MFHA) in chloroform. The reddish-violet extract (molar absorbance 8.6x10³ 1 mole^?1 cm^?1 at λ max 545 nm) is then equilibrated with 3-(o-carboxyphenyl)-1-phenyltriazine-N-oxide (CPPTNO) at pH = 1.5. The resulting ternary complex has enhanced colour (molar absorbance 1.4 × 10⁴ 1 mole^?1 cm^?1 at Λ max 450 nm). The ternary system obeys Beer's Law at 450 nm over the range 0-18 μ g/ml of vanadium. The extraction system achieves 20-fold enrichment of vanadium and enables the determination of the metal down to parts per billion (ng 1^?1) levels. The method tolerates the presence of a large number of anions and cations which are normally present with vanadium in rocks, plant tissues, animal tissues and natural waters. The applicability of the method was tested by the analysis of vanadium in these matrices. MFHA was selected from nine hydroxamic acids as it provided maximum sensitivity and selectivity.     

Kinetic Spectrophotometric Determination of Vanadium (V) Based on its Inhibitory Effect on the Thionine – Ascorbic Acid Reaction

ABSTRACT

A simple and sensitive kinetic method for the determination of vanadium(V) based on its inhibitory effect on the reduction of thionine by ascorbic acid at pH=5 is described. The reaction rate is monitored spectrophotometrically by measuring the decrease in absorbance of thionine at 598 nm after a fixed time (10 min). The calibration graph is linear in the range of 10 ? 120 ng ml^?1 of vanadium(V) and the detection limit is 6 ng ml^?1. The relative standard deviation (RSD) for 80 ng ml^?1 of V(V) was 0.96% (n=10). The method was successfully applied to the determination of vanadium in a certified reference sample.     

Screening for vanadium in urine and blood serum by electrothermal atomic absorption spectrometry and D.C. plasma atomic emission spectrometry

Practical detection limits were 2 and 10 μg l^?1 vanadium for pyrolyte graphite-furnace a.a.s. and d.c.p.-a.e.s., respectively, which allowed screening for urinary vanadium (? 10 μg ?in ? subjects, by direct measurements. Extraction of vanadium with ammonium 1?inecarbodithioate into 4-methylpentan-2-one gave detection limits of 0.5 and ? μg l^?1 vanadium, respectively, for the two techniques.     

Spectrophotometric Determination of Manganese with 4(5)-Imidazolealdoxime (Imalox)

Abstract

A method is described for the spectrophotometric determination of manganese by means of its complex with 4(5)-imidazolealdoxime, IMALOX, formed in alkaline medium. The colour system has its absorption maximum at 350 nm and obeys Beer's law over the range 0.8–8.0 μg of Mn per ml. The optimum range is 1–5 μg m^?1. The molar absorptivity is 7850 1 mol^?1 cm^?1. Relatively few ions interfere, and these can be masked with cyanide, tartrate and NTA. The experimental results have been critically analyzed and a comparison with the main spectrophotometric reagents for manganese is presented.     

Atomic-absorption determination of vanadium and molybdenum in tap water and mineral waters after anion-exchange separation.

A method is described for the determination of vanadium and molybdenum in samples of tap and bottled mineral water. After acidification with citric acid the water sample is heated to about 80°C to remove CO₂; sodium citrate and ascorbic acid are added and the resulting solution of pH 3 is passed through a column of the strongly basic anion-exchange resin Dowex 1-X8 (citrate form) on which both vanadium and molybdenum are adsorbed as anionic citrate complexes. Vanadium is eluted with 6 M hydrochloric acid; molybdenum is recovered with 2 M perchloric acid-1 M hydrochloric acid. Vanadium and molybdenum are determined in the eluates by atomic-absorption spectrometry. The samples analysed contained 0.1–0.9 μg l^?1 vanadium and 0.2–13 μg l^?1 molybdenum.     

Automated method for the determination of boron in water by flow-injection analysis with in-line preconcentration and spectrophotometric detection

A sensitive, automated method for the determination of boron in water samples is described, involving flow injection with on-line ion-exchange preconcentration and spectrophotometric detection of the azomethine-H—boron complex. The method is applicable to various water samples and is free from interferences, even in coloured samples. Detection limits of 5 μg l^?1 at 20 samples h^?1 and 1 μg l^?1 at 10 samples h^?1 with relative standard deviations of < 10% at 1–10 μg l^?1 and < 5%at 10–200 μg l^?1 levels of boron were achieved. The recoveries for spiked natural water samples ranged from 96 to 101%. The method compares favourably with inductively coupled plasma atomic emission spectrometry.     

Kinetic-Spectrophotometric Determination of Molybdenum(VI) Based on Its Catalytic Effect on the Thionine-Hydrazine Reaction

Abstract

A kinetic method for the determination of trace amounts of Mo(VI) (0.05-4 μg ml^?1) based on its catalytic effect on the reduction of thionine by hydrazine monochloride in strongly acidic media is reported. The reaction is monitored spectrophotometrically by measuring the decrease in absorbance of thionine at 605 nm after a fixed time (5 min.). The detection limit of the method is 23 ng ml^?1 and the relative standard deviation (RSD) for 0.05 μg ml^?1 of Mo(VI) is 1.2% (n=7). The method is almost free from interferences, especially from large amounts of tungsten. The procedure was successfully applied to the determination of trace amounts of molybdenum in steel.     

Spectrophotometric Determination of Acebutolol Hydrochloride and Nicoumalone with Metol and Potassium Permanganate

Abstract

A spectrophotometric method is described for the determination of Nicoumalone and Acebutolol hydrochloride based on the formation of molecular complex with the reduction product of Nicoumalone or hydrolysis product of Acebutolol hydrochloride and p-N-methyl benzoguinone monoimine [formed in situ from met01 (p-N-methylaminophenol sulfate) and potassium permanganate, PMBQMI] at pH 3.3. Quantitative measurements were made at the maximum absorption of 525 nm. Beer's law is obeyed in the range of 5–50 μg ml^?1 and 5–60 μg ml^?1 for Nicoumalone and Acebutolol hydrochloride respectively. The proposed method is comparable with the reference method when applied to pharmaceutical preparations, and tablets, An average percentage recovery of 99.5 ± 0.8 was obtained.     

Simultaneous Determination of Valsartan and Hydrochlorothiazide in Tablets by High-Performance Liquid Chromatography

ABSTRACT

A method for the simultaneous determination of valsartan and hydrochlorothiazide in tablets is described. The procedure, based on the use of reversed-phase high-performance liquid chromatography, is linear in the concentration range 5.0-10.0 μg ml^?1 for valsartan and 0.5-2.0 μg ml^?1 for hydrochlorothiazide, is simple and rapid and allows accurate and precise results. The limit of detection was 1.0 μg ml^?1 for valsartan and 0.05 μg ml^?1 for hydrochlorothiazide.     

Spectrophotometric Determination of Gadolinium(III) With O-Hydroxyhydroqoinonephthalein in Mixed Micelles of N-Hexadecylpyridinilm Chloride and Brij 35

Abstract

A sensitive, simple and selective spectrophotometric method for the determination of gadolinium(III) is proposed using o-hydroxyhydroquinonephthalein(Qnph), by analogy with phenylfl-uorone(Phfl), in the presence of N-hexadecylpyridinium chlo-ride(HPC)-Brij 35 mixed surfactants. The calibration curve is rectilinear in the range of 0 – 16.0 μg per 10 ml at 590 nm with an apparent absorption coefficient(?) of 1.2 × 10⁵ 1 cm^?1 mol^?1 and Sandell sensitivity of 0.0013 μg/cm² gado-linium(III).     

Square‐Wave Adsorptive‐Stripping Voltammetric Detection in the Quality Control of Fluoxetine

ABSTRACT

A simple and sensitive extraction-spectrophotometric method for the determination of barium and potassium is reported. The 18C6-Barium-Orange II (18C6-Ba-(OR II)₂) and 18C6-Potassium-Orange II (18C6-K-OR II) ternary complexes are quantitatively extracted into dichloromethane and their absorbances are measured at 483 nm. Linear calibration graphs were obtained over the barium concentration range of 0.1-5 μg ml^?1 and potassium concentration range of 1-8 μg ml^?1. The relative standard deviation for 2.0 μg ml^?1 barium and pottasium are, respectively, 4.16% and 3.60%. The interfering effect of a large number of diverse ions on the determination of barium and potassium was studied. The method was applied to a synthetic sample with natural matrix effects of tap water and the results showed high potential of the recommended method for the determination of Ba and K in water samples.